Other Common Laboratory Equipment
Filter
Showing 1111–1140 of 1897 results
| Brand | Lihero |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | LFSC-2007 |
| Communication Interfaces | RS485 (1 channel), Ethernet (1 channel with built-in surge protection), GPRS, CDMA, ADSL, LAN, PSTN dial-up |
| Local Storage | 2 GB (supports ≥5 years of timestamped environmental monitoring data) |
| Backup Power | Integrated rechargeable battery, >8 hours runtime during AC power failure |
| Data Transmission | Multi-destination forwarding (one-to-many), CSV/Excel export via USB or network |
| Communication Switching | Manual or auto-failover switching between GPRS and Ethernet via HMI interface |
| Compliance | IEC 61000-4-5 (surge immunity), EN 61326-1 (EMC for industrial environments) |
| Brand | Lihero |
|---|---|
| Model | LHHA-2013 (H₂) |
| Principle | PEM-free alkaline water electrolysis |
| Output Purity | ≥99.999% H₂ |
| Flow Rate | Up to 300 mL/min (adjustable) |
| Output Pressure | 0–0.4 MPa (adjustable, stabilized) |
| Water Reservoir Capacity | 3.5 L stainless steel integrated tank |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Dimensions | 360 × 280 × 520 mm |
| Weight | 22 kg |
| Safety Protections | Over-pressure shutdown, over-flow cutoff, low-water alarm, thermal overload protection |
| Communication Interface | RS-232 serial port for remote monitoring and control |
| Brand | Lihero |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | LHMCT-2018 |
| Pricing | Available Upon Request |
| Ingress Protection Rating | IP55 |
| Operating Temperature Range | -20 °C to +50 °C |
| Remote Control | 5G-enabled Web & Mobile APP Interface |
| Sample Preservation | Sealed, Tamper-Evident Bottle System with Quick-Connect Pneumatic Coupling |
| Data Compliance | Supports Audit Trail Logging, Remote Parameter Configuration, and Event-Triggered Image Capture |
| Brand | Lihero |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | LHWTE-2014 |
| Pricing | Available Upon Request |
| Treatment Capacity | ≥10 L/h |
| pH Adjustment Range | 6–9 |
| Treatment Stages | Neutralization & Sedimentation → Activated Carbon Filtration → Ion Exchange Resin Column |
| Automation Features | Real-time Monitoring with Alarms for Treatment Efficiency, Overflow, and Pipeline Blockage |
| Brand | Lihero |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | Pre-Treatment Unit |
| Pricing | Available Upon Request |
| Brand | Liquid Instruments (LI) |
|---|---|
| Origin | Imported |
| Model | Moku:GO |
| Analog Inputs | 2 × 12-bit, 125 MSa/s, 30 MHz BW, ±25 V range |
| Analog Outputs | 2 × 12-bit, 125 MSa/s, 20 MHz BW, ±5 V max |
| Digital I/O | 16 channels @ 125 MSa/s, 3.3 V logic (5 V tolerant) |
| Programmable Power Supply Options | 2-channel or 4-channel, with multiple voltage/current profiles |
| Integrated Instruments | Arbitrary Waveform Generator, Data Logger, Frequency Response Analyzer, Logic Analyzer / Pattern Generator, Oscilloscope / Voltmeter, PID Controller, Spectrum Analyzer, Waveform Generator |
| Connectivity | USB-C (power + data), Wi-Fi hotspot, Gigabit Ethernet (on select configurations) |
| Software | Native Windows/macOS GUI, Python/MATLAB/LabVIEW APIs, real-time remote lab management capability |
| Compliance | Designed for academic lab environments with electrical isolation, overvoltage protection, and robust ESD immunity per IEC 61000-4-2 |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | STC-ZINCAIR-W |
| Price Range | USD 700 – 1,400 (FOB) |
| Compatible Instrumentation | X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Synchrotron Beamlines |
| Construction Material | 316 Stainless Steel Body |
| Sealing System | PTFE Cylinder + Fluoroelastomer (FKM) O-Rings |
| Optical Window | Fused Silica (Quartz), Ø10 mm × 1 mm Thickness |
| Optional Window Materials | BaF₂, Al₂O₃, CaF₂, Sapphire |
| Maximum Electrode Diameter | Ø16 mm |
| Maximum Operating Temperature | 200 °C |
| Gas Interface | Dual 1/16″ Swagelok®-Compatible Stainless Steel Needle Valves + 1/16″ SS Tubing |
| Overall Dimensions | Ø80 mm × 62 mm |
| Certification | CE Marked |
| Warranty | 12 Months Full Coverage, Lifetime Technical Support |
| Compliance | Designed for ISO/IEC 17025-aligned laboratories |
| Brand | LabTech |
|---|---|
| Model | LNG |
| Origin | Beijing, China |
| Manufacturer | LabTech (OEM/ODM Producer) |
| Type | Domestic Benchtop Cryogenic Generator |
| Cooling Options | Air-Cooled or Water-Cooled (45°C Ambient Tolerance) |
| Output Capacity | 10–80 L/day Liquid Nitrogen |
| Purity | ≥99.5% N₂ (v/v) |
| Storage Vessel | Stainless Steel Dewar (20–210 L Options) |
| Core Technology | Integrated PSA Nitrogen Generation + Closed-Cycle Helium Refrigeration |
| Control Interface | Color Touchscreen HMI |
| Filtration | Sterile Membrane Filter on Nitrogen Supply Line |
| Cold Head Integration | Direct-Mounted to Dewar for Minimized Thermal Loss |
| Footprint | Compact Benchtop Design |
| Acoustic Emission | <65 dB(A) at 1 m |
| Brand | Longcai Technology / HCP |
|---|---|
| Origin | Taiwan |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic (Taiwan-based) |
| Model | PPLN Bulk Mixers |
| Pricing | Available Upon Request |
| Brand | Longcai Tech / HCP |
|---|---|
| Origin | Taiwan |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China (Manufactured in Taiwan) |
| Model | FS-Series |
| Coating | AR-coated for SHG, SFG, DFG, and OPO applications |
| Crystal Thickness (Z) | 0.5 mm, 1.0 mm |
| Crystal Length (X) | 0.3 mm, 0.5 mm, 1.0 mm |
| Customization | Available for poling period, aperture, orientation, and coating spectral range |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (PRC) |
| Model | CF121 |
| Pricing | Available Upon Technical Inquiry |
| Brand | LUDL |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BioPrecision2 |
| Pricing | Available Upon Request |
| Brand | LUJINGHUANJING |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | LJ-JHQ01 |
| Instrument Type | Filter-Based Air Purifier |
| Recommended Coverage Area | 58–100 m² |
| Noise Level | 15–55 dB(A) |
| Airflow Rate | 300 m³/h |
| Brand | LUXOR (Aptco Technologies, Belgium) |
|---|---|
| Origin | Belgium |
| Model | LUXOR Au |
| Target Material | Gold (Au) |
| Coating Method | Magnetron Sputtering |
| Operating Atmosphere | Air or Argon |
| Max. Magnification Compatibility | 50,000× (for Tungsten Filament & Desktop SEMs) |
| Sample Capacity | Up to 7 × 12 mm stubs or 3 × 25 mm stubs |
| Target Diameter | 30 mm |
| Target Thickness | 100 µm |
| Brand | LUXOR (Aptco Technologies, Belgium) |
|---|---|
| Origin | Belgium |
| Model | LUXOR C |
| Evaporation Source | Bradley-type carbon rod |
| Max. Sample Capacity | 7 × 12.5 mm pin stubs or 3 × 25 mm pin stubs |
| Design | Inverted configuration |
| Automation Level | Fully automated touchscreen interface |
| Compliance | CE-marked, designed for ISO/IEC 17025-compliant labs, compatible with GLP/GMP documentation workflows |
| Brand | LUXOR (Aptco Technologies) |
|---|---|
| Origin | Belgium |
| Model | LUXOR Pt |
| Target Material | Platinum (99.999% purity, 30 mm diameter × 100 µm thickness) |
| Operating Atmosphere | Argon only |
| Sample Capacity | Up to 7 × 12.5 mm or 3 × 25 mm pin-mount samples |
| Design | Inverted chamber with integrated sample stage |
| Automation Level | Fully automated via capacitive touchscreen interface |
| Safety | Fully enclosed high-voltage circuitry |
| Compliance | Designed for GLP-compliant SEM sample preparation workflows |
| Brand | LY (Beijing Liuyi) |
|---|---|
| Origin | Beijing, China |
| Model | DYY-11 |
| Output Channels | 4 independent parallel outputs |
| Voltage Range | 4–1000 V (1 V resolution) |
| Current Range | 4–500 mA (1 mA resolution) |
| Power Range | 4–300 W (1 W resolution) |
| Dimensions (W×D×H) | 303 × 364 × 137 mm |
| Weight | 7.5 kg |
| Display | Large LCD with real-time parameter monitoring |
| Control Modes | Constant Voltage / Constant Current / Constant Power |
| Programming | 10 stored protocols, up to 9 steps per protocol |
| Protection Features | Over-voltage, over-current, over-load, load variation, and no-load detection with automatic shutdown |
| Memory | Non-volatile program storage |
| Cooling | Integrated forced-air cooling system |
| Compliance | Designed for laboratory electrophoresis applications per IEC 61010-1 safety standards |
| Brand | LY (Beijing Liuyi) |
|---|---|
| Origin | Beijing, China |
| Model | DYY-15D |
| Output Channels | 4 parallel independent outputs |
| Voltage Range | 20–5000 V (2 V resolution) |
| Current Range | 3–300 mA (1 mA resolution) |
| Power Range | 5–300 W (1 W resolution) |
| Display | Large LCD showing real-time voltage, current, power, and timer |
| Programming | 10 stored protocols, each with up to 9 programmable steps |
| Operating Modes | Constant Voltage, Constant Current, Constant Power, Timer Mode, Volt-Hour Mode, Stepwise Program Mode |
| Safety Features | Overload protection, short-circuit auto-shutdown, over-temperature monitoring, low-current maintenance mode, power-fail recovery |
| Dimensions (W×D×H) | 278 × 349 × 110 mm |
| Weight | 4.0 kg |
| Brand | LY (Beijing Liuyi) |
|---|---|
| Model | DYY-2C |
| Output Modes | Constant Voltage & Constant Current |
| Voltage Range | 0–600 V (1 V resolution) |
| Current Range | 0–100 mA (1 mA resolution) |
| Max Power | 60 W |
| Dimensions (W × D × H) | 235 × 295 × 95 mm |
| Weight | 2.5 kg |
| Display | Digital LCD showing real-time V, I, and timer |
| Protection | Overvoltage, overcurrent, overload, variable-load, and no-load detection with auto-shutdown |
| Cooling | Passive convection |
| Output | 4 parallel DC output terminals |
| Control | Microprocessor-based digital regulation with memory recall |
| Brand | LY (Beijing Liuyi) |
|---|---|
| Model | DYY-6D |
| Output Channels | 4 independent parallel outputs |
| Voltage Range | 6–600 V (1 V resolution) |
| Current Range | 4–600 mA (1 mA resolution) |
| Power Range | 1–300 W (1 W resolution) |
| Display | Large LCD showing real-time V, I, P, and timer |
| Memory | 10 user-programmable 3-step protocols |
| Control | Microprocessor-based with continuous parameter adjustment |
| Safety | Overload, short-circuit, over-temperature, and automatic shutdown protection |
| Dimensions (W×D×H) | 246 × 360 × 80 mm |
| Weight | 3.2 kg |
| Compliance | Designed for GLP-compliant electrophoresis workflows in molecular biology labs |
| Brand | LY (Beijing Liuyi) |
|---|---|
| Origin | Beijing, China |
| Model No. | 112-0730 |
| Output Voltage Range | 2–300 V (1 V resolution) |
| Output Current Range | 5–2000 mA (2 mA resolution) |
| Max. Power Output | 300 W |
| Dimensions (W × D × H) | 315 × 290 × 128 mm |
| Weight | 5 kg |
| Output Channels | 4 independent parallel outputs |
| Protection Features | Over-voltage, over-current, over-load, and load-mismatch detection |
| Control System | Microprocessor-based with real-time parameter adjustment |
| Display | LCD showing simultaneous voltage, current, and timer values |
| Memory Function | Parameter storage for repeat protocols |
| Power Architecture | High-efficiency switching-mode power supply |
| Brand | LY (Beijing Liuyi) |
|---|---|
| Origin | Beijing, China |
| Model | DYY-8C |
| Output Modes | Constant Voltage & Constant Current |
| Voltage Range | 5–600 V (1 V resolution) |
| Current Range | 2–200 mA (1 mA resolution) |
| Max Power | 120 W |
| Output Channels | 4 parallel DC outputs |
| Dimensions (W×D×H) | 235 × 295 × 95 mm |
| Weight | 2.5 kg |
| Display | LCD showing real-time voltage, current, and timer |
| Protection Features | Over-voltage, over-current, over-load, load variation, and no-load detection |
| Control System | Microprocessor-based with memory recall function |
| Cooling | Integrated forced-air cooling system |
| Compliance | Designed for laboratory electrophoresis applications per standard molecular biology protocols (e.g., SDS-PAGE, agarose gel electrophoresis) |
| Brand | Binzhenghong |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | OEM Manufacturer |
| Origin Category | Domestic (China) |
| Model | M6 |
| Pricing | Upon Request |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MAG-2 |
| Dimensions (W×D×H) | 87 mm × 136 mm × 58–72 mm |
| Weight | 232 g |
| Maximum Load Capacity | 0.5 kg |
| Longitudinal Tilt Range | ±10° |
| Transverse Tilt Range | ±15° |
| Accessories Included | CP-1 Chamber Plate (1 pc), CP-2 Chamber Plate (1 pc), Hex Key, Vinyl Sheet |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MAG-3 |
| Dimensions (W×D×H) | 108 mm × 152 mm × 109–130 mm |
| Weight | 1.7 kg |
| Maximum Load Capacity | 2 kg |
| Longitudinal Tilt Range | ±15° |
| Transverse Tilt Range | ±20° |
| Included Accessories | CP-1 Chamber Holder (1 pc), CP-2 Chamber Holder (1 pc), Vinyl Sheet (1 pc) |
| Brand | MakeWave |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | HXO-CW30L |
| Price Range | USD 700 – 1,400 |
| Brand | MakeWave |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | MHX-16A |
| Price Range | USD 70,000 – 140,000 (FOB) |
| Instrument Category | Hazardous Solid Waste Treatment System |
| Applicable Field | On-site, low-volume hazardous waste generators with logistical constraints (e.g., limited transport access, high batch frequency, space-sensitive facilities) |
| Treatment Principle | Microwave-assisted pyrolysis (anaerobic thermal decomposition) and controlled incineration (aerobic combustion) |
| Throughput | 2 kg/h (based on cotton textile reference matrix) |
| Regulatory Compliance | GB 18484–2001 (Pollution Control Standard for Hazardous Waste Incineration), GB 4706.21–2008, GB 5959.6–2008 |
| Microwave Power/Frequency | 0–16 kW adjustable / 2450 MHz |
| Cavity Construction | Fully welded stainless steel vacuum-rated chamber |
| Chamber Volume | Pyrolysis/Incineration chamber: 70 L |
| Discharge chamber | 100 L |
| Expansion/diffusion chamber | 30 L |
| Temperature Range | 0–1200 °C (Type K thermocouple) |
| Atmosphere Control | Dual independent gas supply paths (inert for pyrolysis |
| Exhaust Treatment | Integrated adsorption-catalytic decomposition system compliant with GB 18484–2001 emission limits |
| Residue Thermal Reduction Rate | <5% (measured per ASTM D2974 or equivalent gravimetric protocol) |
| Volume Reduction Ratio | 40:1 (cotton textile reference) |
| Control System | PLC-based HMI with color touchscreen |
| Safety Features | Interlocked access doors |
| Dimensions (W×D×H) | 2800 × 1300 × 2400 mm (excl. external exhaust treatment unit) |
| Brand | MAKEWAVE |
|---|---|
| Model | MKX-X1G1A-1L |
| Chamber Volume | 20 L |
| Digestion Vessel Capacity | 1 L |
| Microwave Power | 0–800 W (PID-controlled, continuous non-pulsed) |
| Frequency | 2450 MHz |
| Temperature Range | 0–260 °C (fiber-optic sensing) |
| Pressure Range | 0–3 MPa (capillary pressure transducer) |
| Vessel Material | Inner TFM |
| Safety Features | Dual-metal flange + screw-lock sealing, burst-disk pressure relief, <5 mW/cm² microwave leakage |
| Compliance | Meets GB 4706.21 & GB 10436 national safety standards for microwave equipment |
| Control System | PLC-based touchscreen interface with real-time T/P/Pwr/time curve logging and USB data export |
| Brand | MakeWave |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model Series | MKZ/MGZ |
| Price Range | USD 14,000 – 42,500 |
| Microwave Frequency | 2450 MHz |
| Max. Microwave Power | 1600 W (MKZ-G2A) / 3200 W (MKZ-G4A) / 8000 W (MGZ-G10A) |
| Cavity Volume | 28 L / 100 L / 300 L |
| Construction Material | AISI 304 Stainless Steel, Fully Welded Vacuum Chamber |
| Vacuum Level | −0.093 MPa (measured at Qingdao elevation) |
| Temperature Range | 0–300 °C (infrared non-contact measurement) |
| Pressure Monitoring | Full-range vacuum pressure sensor |
| Control System | PLC-based HMI with color touchscreen, multi-segment program storage & parameter export |
| Safety Compliance | Microwave leakage <5 mW/cm² (GB 10436-2008), interlocked door, explosion-proof design, corrosion-resistant coating (PTFE optional) |
| Dimensions (W×D×H) | 655×550×800 mm / 1360×800×1600 mm / 1550×900×1800 mm |