- All
- Favorite
- Popular
- Most rated
| Brand | Konica Minolta |
|---|---|
| Origin | Japan |
| Model | CM-2300d |
| Instrument Type | Portable |
| Optical Geometry | 0/45° integrating sphere |
| Light Source | Dual pulsed xenon lamps |
| Spectral Range | 360 nm to 740 nm |
| Wavelength Interval | 10 nm |
| Spectral Bandwidth | ~10 nm |
| Reflectance Range | 0–175% |
| Display Resolution | 0.01% |
| Measurement Time | ~1.5 s (SCI & SCE simultaneously) |
| Repeatability | ΔE*ab ≤ 0.08 (after white calibration, 30 measurements at 10 s intervals) |
| Inter-instrument Agreement | ΔE*ab ≤ 0.4 (SCI, based on BCRA Series II standards) |
| Measuring/Aperture Area | Ø8 mm / Ø11 mm |
| Weight | 670 g (without batteries) |
| Data Storage Capacity | 1,700 sets (each set includes paired SCI/SCE data) |
| Compliance | CIE No. 15, ISO 7724-1, ASTM E1164, DIN 5033 Teil 7, JIS Z8722 Condition C |
| Brand | Yi Heng (Shanghai) |
|---|---|
| Origin | Shanghai, China |
| Model | DHP Series |
| Temperature Range | RT+5°C to 65°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ±1.5°C (at 37°C, horizontal models) / ±2.0°C (at 37°C, vertical models) |
| Temperature Fluctuation | ±0.5°C |
| Power Input | 200–2200 W (model-dependent) |
| Chamber Volume | 16–1000 L |
| Interior Dimensions (W×D×H, mm) | 250×260×250 to 890×740×1590 |
| Exterior Dimensions (W×D×H, mm) | 530×480×420 to 1050×880×2060 |
| Standard Shelving | 2–4 stainless steel trays |
| Display Type | LED (standard) / LCD (B-series) |
| Optional Features | UV sterilization module, programmable multi-segment controller (7 programs × 9 steps), RS485 interface, thermal printer output, independent over-temperature cut-off alarm, auto-fan speed modulation |
| Brand | Grabner |
|---|---|
| Origin | Austria |
| Model | Mobile LAB |
| Vehicle Integration | Custom Chassis Options |
| Power Supply | Dual-mode (110/240 V AC + Rechargeable Battery) |
| Environmental Control | Independent HVAC with 20 air changes/hour |
| Safety | Seismic-grade instrument mounting, anti-slip flooring, fire extinguisher, dedicated waste/fresh water tanks |
| Data Infrastructure | Integrated LAN, optional GPS, printer, and PC |
| Compliance | Designed for ASTM D975, D3948, D4865, EN 590, ISO 4214, and USP <1058> analytical instrument qualification frameworks |
| Brand | Occhio |
|---|---|
| Origin | Belgium |
| Model | SCAN Series |
| Particle Size Range | 10 µm – 50 mm (extendable to 2 µm – 20 cm) |
| Optical Resolution | Up to 600 Mpx (Scan 700) |
| Illumination | Broadband white light (350–640 nm), transmission + reflection modes |
| Imaging Sensor | High-speed CCD linear array |
| Software | Callisto 2D/3D |
| Dispersion | Dry-mode linear disperser with anti-adhesion metal coating |
| Sample Stage | 242 × 320 mm (Scan 700) |
| Compliance | ASTM D7927, ISO 9276-6, USP <1788>, GLP-ready audit trail in Callisto |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | WNB22 |
| Instrument Type | Circulating Water Bath |
| Internal Volume | 22 L |
| Temperature Range | 10 °C to 95 °C (with optional boiling mode at 100 °C) |
| Temperature Stability | ±0.1 °C (typical, at 37 °C, load-free) |
| Temperature Resolution & Setpoint Accuracy | 0.1 °C |
| Control System | PID with self-diagnostic function |
| Sensor | Dual 4-wire Pt100 (E-type), single 4-wire Pt100 (B-type) |
| Overtemperature Protection | Triple-stage (E-type) / Dual-stage (B-type) |
| Timer Range | B-type: 1 min – 99 h 59 min |
| E-type | 1 min – 999 h |
| Power Rating | 2000 W |
| Construction | Stainless steel inner bath and outer housing (AISI 304) |
| Certifications | CE, tested to IEC 61010-1 for laboratory safety |
| Brand | Konica Minolta |
|---|---|
| Origin | Japan |
| Instrument Type | Portable |
| Optical Geometry | d/8° integrating sphere |
| Light Source | Pulsed Xenon Lamp |
| Spectral Range | Y Reflectance 0.01–160.00% |
| Repeatability | ΔE*ab ≤ 0.07 (std. dev., white calibration, 30 measurements at 10 s intervals) |
| Measurement Aperture | Ø50 mm / Illumination Area: Ø53 mm |
| Measurement Time | 1 s |
| Minimum Interval | 3 s |
| Battery Life | ~800 measurements (AAA alkaline/Ni-MH, Konica Minolta specified conditions) |
| Display | Backlit dot-matrix LCD (15×9 characters + icon line), 6 language options (EN/DE/FR/IT/ES/JP) |
| Data Storage | 1,000 measurements (instrument-only) |
| Standard Calibration | CR-A44 white calibration tile |
| Compliance | CIE 1931 2° standard observer, CIE No. 15:2004, ISO 7724-1, ASTM E308, JIS Z 8722 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 60 digital |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 40 L |
| Speed Range | 0/30–2000 rpm |
| Motor Output Power | 126 W |
| Max. Torque | 60 N·cm |
| Speed Control | Continuous (Stepless) |
| Speed Display | LED, 7-segment |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Speed Deviation | ±1% (n > 300 rpm) |
| Max. Viscosity | 50,000 mPa·s |
| Shaft Clamping Range | 0.5–10 mm |
| Hollow Shaft ID | 11 mm |
| Dimensions (W×H×D) | 86 × 248 × 208 mm |
| Weight | 4.4 kg |
| IP Rating | IP42 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| Motor Type | Brushless DC |
| Continuous Duty Cycle | 100 % |
| Input Voltage | 230 / 115 / 100 V |
| Frequency | 50/60 Hz |
| Input Power | 176 W |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | BW-12 / BWS-12 / BW-27 / BWS-27 (with magnetic drive pump) |
| Temperature Range | RT+5°C to 100°C (BW series), RT+5°C to 80°C (BWS series) |
| Temperature Stability | ±0.2°C |
| Resolution | 0.1°C |
| Effective Volume | 11 L (BW-12/BWS-12), 20 L (BW-27/BWS-27) |
| Inner Tank Dimensions | 300×240×200 mm (BW-12/BWS-12), 500×300×200 mm (BW-27/BWS-27) |
| Power Supply | AC 220 V, 50 Hz |
| Heating Power | 800 W (BW-12), 1000 W (BWS-12 & BWS-27) |
| Timer Range | 0–9999 min |
| Circulation Type | Internal recirculation only |
| Control Mode | Heating-only PID temperature regulation |
| Safety Features | Independent dry-run protection, dual-limit overtemperature cutoff |
| Brand | PreeKem |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Aurora-6 |
| Quotation | Upon Request |
| Cavity Grade | Industrial-Grade |
| Sample Capacity | 16–40 vessels |
| Microwave Source | Dual Magnetron System |
| Max Temperature | 500 °C |
| Max Pressure | 15 MPa |
| Cavity Material | 316L Stainless Steel |
| Power Input | 220–240 V / 50 Hz, 16 A |
| Installed Power | 3200 W |
| Microwave Frequency | 2450 MHz |
| Output Mode | Non-pulsed Continuous Microwave |
| Power Control Accuracy | ±1 W |
| Control Algorithm | High-Frequency Closed-Loop PID |
| Display | 7-inch HD Color Touchscreen |
| Cooling System | Twin-Air Dual-Direction Forced Air Cooling with Optimized Duct Design |
| Operating Ambient | 5–40 °C, 15–80% RH |
| Dimensions (H×W×D) | 665 × 546 × 590 mm |
| Weight | 70 kg |
| Brand | Grabner |
|---|---|
| Origin | Austria |
| Model | MINITEST FFK |
| Test Principle | Corrosion-Resistant Capillary Extrusion (DIN 51805) |
| Temperature Range | −50 °C to +30 °C |
| Temp. Accuracy | ±0.1 °C |
| Pressure Range | 0–300 kPa |
| Pressure Accuracy | ±0.1 kPa |
| Dimensions | 196 × 315 × 175 mm |
| Weight | 10 kg |
| Power Supply | 100–240 V AC, 50/60 Hz, 200 W or 12 V DC (optional) |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | FieldLab 58 |
| Product Type | Portable Instrument |
| Detection Capabilities | Elemental Analysis (XRF), Particle Counting, Kinematic Viscosity at 40 °C, FTIR-based Oxidation, Nitration, Soot, Water, TAN/TBN, Fuel & Glycol Contamination |
| Power Supply | Rechargeable Lithium-ion Battery |
| Dimensions | 487.68 × 386.08 × 228.6 mm (L × W × H) |
| Compliance | ASTM D6595, D7690, D7883, D7621, D7943, ISO 11171, ISO 4406, ISO 21468, ISO 21469, USP <1058>, FDA 21 CFR Part 11 (audit trail enabled in software) |
| Brand | Sartorius |
|---|---|
| Origin | Germany |
| Model | Quintix213-1CN (210 g / 1 mg, internal calibration) |
| Max Capacity | 210 g |
| Readability | 1 mg |
| Repeatability | 1 mg |
| Linearity | 2 mg |
| Stabilization Time | 1.5 s |
| Pan Diameter | 120 mm |
| Chamber Height | 209 mm |
| Dimensions (W × D × H) | 216 × 360 × 320 mm |
| Weight | ~4.9 kg |
| Power Supply | 100–240 V AC |
| Interface | miniUSB |
| Compliance | ISO/IEC 17025 traceable calibration, GLP/GMP-compliant print output, CMC certification (China), ISO CAL automatic internal adjustment |
| Brand | YiHeng (Shanghai Yi Heng) |
|---|---|
| Origin | Shanghai, China |
| Model | BPHJS Series |
| Temperature Range | −60 °C to +130 °C |
| Humidity Range | 30–95 %RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Fluctuation | ±3 %RH |
| Refrigerant | R134a (ozone-friendly) |
| Inner Chamber Material | AISI 304 mirror-finish stainless steel |
| Control System | Color TFT touchscreen with programmable logic (120 programs × 99 segments, up to 999 cycles) |
| Communication Interface | RS-232/RS-485, USB data export (SD card), optional 485 printer interface |
| Safety Protections | Independent over-temperature cutoff, compressor overheat/overcurrent/overload protection, fan overheat protection, low-water alarm |
| Power Supply | AC 380 V, 50 Hz (models with −40 °C or −60 °C capability) |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | DS-20 (Stator Outer Diameter: 20 mm) |
| Rotor Outer Diameter | 15 mm |
| Maximum Tip Speed | 30.6 m/s |
| Probe Length | 250 mm |
| Minimum Immersion Depth | 200 mm / 40 mm (depending on configuration) |
| Recommended Sample Volume (Water) | 20–5,000 mL |
| Rotor-Stator Configuration | Shear-Mixing, Emulsification, or Multi-Function |
| Stator Types | Coarse, Fine, Fine-Pin, and Micro-Structured |
| Rotor Types | Shear-Mixing, Emulsification, or Dual-Function |
| Compatibility | Paste, Fibrous, and Liquid Matrices |
| Modular Quick-Change System | Yes |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Model | 2567C-50 |
| Pump Type | Oil-Free Reciprocating Piston Vacuum Pump |
| Pumping Speed | 4.9 m³/h (82 L/min) |
| Ultimate Vacuum | <80 mbar (abs) |
| Motor Power | 250 W |
| Dimensions (L×W×H) | 381×254×254 mm |
| Weight | 7.5 kg |
| Exhaust Port Diameter | 7 mm |
| Noise Level | ≤52 dB(A) |
| Duty Cycle | Continuous Operation Rated |
| Brand | LUM |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LUMiFrac |
| Quotation | Upon Request |
| Principle | Centrifugal Fracture Testing (Dynamic Load Application via Rotating Rotor) |
| Max. Centrifugal Force Range | 0.1 N – 6.5 kN |
| Rotational Speed Range | 100 – 13,000 rpm |
| Tensile Strength Measurement Range | up to 80 MPa |
| Sample Capacity | 8 parallel specimens |
| Sample Dimensions | max. 30 × 30 × >1 mm³ |
| Bonded Area Diameter | 7 mm, 10 mm or custom |
| Bonded Surface Materials | metallic & non-metallic substrates |
| Specimen Mass Range | 4.1 g – 38.7 g (Cu/W-based reference: ~58 g) |
| Temperature Control Range | −11 °C to +40 °C |
| Measurement Duration | 1 min – 99 h |
| Compliance | ISO 4624, DIN EN 15870, DIN EN 14869-2, JIS K 5600-5-7 |
| Data Interface | USB |
| Power Supply | 100/120/230 V, 50/60 Hz |
| Max. Power Consumption | 1050 W |
| Net Weight | 56 kg |
| Dimensions (W×H×D) | 380 × 296 × 640 mm³ |
| Software Platform | SEPView® v6.x with real-time critical force calculation, statistical comparison, GLP-compliant audit trail, and FDA 21 CFR Part 11-ready user access control |
| Brand | KUDOS |
|---|---|
| Origin | Shanghai, China |
| Model Series | SK-12C / SK-18C / SK-24C / SK-36C |
| Tank Capacity | 26 L / 54 L / 90 L / 123 L |
| Ultrasonic Frequency | 25 kHz |
| Ultrasonic Power Output | 500 W / 750 W / 1000 W / 1500 W |
| Power Adjustment Range | 40–100% in 1% increments |
| Timer Range | 1–99 minutes |
| Tank Material | 304 Stainless Steel |
| Drain Valve | Integrated 304 stainless steel valve |
| Transducer Count | 12 / 18 / 24 / 36 |
| External Dimensions (W×D×H) | 44×45×52 cm / 48×54×63 cm / 61×60×77 cm / 90×70×82 cm |
| Internal Tank Dimensions (W×D×H) | 38×28×25 cm / 42×37×35 cm / 54×41×41 cm / 83×53×28 cm |
| Instrument Type | General-purpose ultrasonic cleaner |
| Regulatory Classification | Domestic-manufactured laboratory equipment |
| Brand | JEIO TECH |
|---|---|
| Origin | South Korea |
| Model | MSA-0420 |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume | 20 L |
| Speed Range | 80–2000 rpm |
| Torque | 19 N·cm |
| Max. Viscosity Handling | 10,000 cP (at 1200 rpm) |
| Temperature Control Range | 5–40 °C |
| Motor | Brushless DC |
| Power Input/Output | 70 W / 40 W |
| Chuck Capacity | 3–10 mm |
| Housing Material | Anodized Aluminum Body with PP Components |
| Dimensions (W×H×D) | 75 × 215 × 150 mm |
| Net Weight | 2.8 kg |
| Protection Class | IP30 (DIN EN 60529) |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Brand | Erlab |
|---|---|
| Origin | France |
| Model | Captair 834 Smart |
| Airflow Capacity | 220 m³/h |
| Dimensions (L×W×H) | 900 × 530 × 2138–2323 mm |
| Voltage/Frequency | 100–240 V AC / 50–60 Hz (Internal Circuit: 24 V DC) |
| Cabinet Material | Chemically resistant polypropylene (transparent front panels) + galvanized steel coated with acid-resistant polymer |
| Filter Frame Material | Polypropylene (PP) |
| Filtration Technology | Patented modular dual-layer filter system (primary + safety filter) |
| Safety Alarms | LED status band + audible tone coding for fan failure, face velocity deviation, or filter saturation |
| Compliance | AFNOR NF X 15-211:2009 (FR), SEFA 9 (US), BS 7989 (UK), DIN 12927 (DE), JG/T 385–2012 (CN), EN 1822:1998 (HEPA H14/ULPA U17) |
| Filter Efficiency | Residual chemical concentration < 1% of OSHA TWA or ACGIH TLV thresholds |
| Filter Saturation Detection | Molecode® S (organics), A (inorganics), F (formaldehyde) |
| Certified Test Reports | TÜV SGS (SEFA 9), Intertek (NF X 15-211), Tongji University (JG/T 385–2012) |
| Security | Dual-point mechanical lock |
| Brand | LISICO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | LS-1 |
| Price Range | USD 14,000 – 70,000 |
| Instrument Type | Low-Field TD-NMR Analyzer |
| Sample Type | Solid–Liquid Suspensions |
| Magnet Type | Samarium–Cobalt Permanent Magnet |
| Static Field Strength | 0.165 ± 0.01 T |
| Larmor Frequency | 7.0 ± 0.3 MHz |
| Frequency Tuning Range | 1–75 MHz |
| Pulse Sequences Supported | FID, Spin Echo (SE), CPMG, Saturation Recovery T₁ (Sat_T1) |
| Relaxation Time Range | 0.1 ms – 10 s |
| Probe Inner Diameter | 20 mm |
| Sample Volume | 1–5 mL |
| Measurement Repeatability | ±2% |
| Frequency Resolution | 0.28 Hz |
| Phase Accuracy | 0.09° |
| Timing Resolution | 13.3 ns |
| Sampling Rate | 75 MS/s |
| Maximum Acquisition Bandwidth | 10 MHz |
| Minimum Echo Spacing | 150 µs |
| Maximum Echo Train Length | 60,000 |
| Brand | Sartorius |
|---|---|
| Origin | Germany |
| Model | arium® 611 VF |
| Dimensions (W×H×D) | 30.2 × 11.3 × 15.7 cm |
| Unit Weight | 17.4 kg |
| Operating Weight | 26.4 kg |
| Resistivity | 18.2 MΩ·cm at 25 °C |
| Total Organic Carbon (TOC) | <1 ppb |
| Endotoxins | <0.001 EU/mL |
| Particles | <1 particle/mL @ ≥0.2 µm |
| Microbial Contamination | <1 CFU/mL |
| Flow Rate | 1.5 L/min |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | G20S |
| Instrument Type | General-purpose Potentiometric Titrator |
| Measurement Range | ±2000 mV / pH –26.0 to 40.0 |
| Meter Accuracy | 0.01% |
| Meter Resolution | 0.1 mV / 0.001 pH |
| Titration Precision | 0.2 mV / 0.003 pH |
| Built-in Stirrer | Propeller-type |
| Endpoint Detection | Yes |
| GLP-Compliant Reporting | Yes |
| Preloaded Methods | >20 |
| Max. Samples per Series | 120 |
| USB Connectivity | Yes |
| RFID-enabled Smart Burettes | Yes |
| LabX Express Software Integration | Yes |
| Optional Rondolino Autosampler | Yes |
| Brand | Sartorius |
|---|---|
| Origin | Germany |
| Model | BSA423S-CW |
| Type | Precision Balance |
| Maximum Capacity | 420 g |
| Readability | 1 mg |
| Repeatability | ≤1 mg |
| Linearity | ≤1 mg |
| Calibration | Motorized Internal Calibration |
| Pan Size | 115 × 120 mm |
| Display | Backlit High-Contrast LCD, 15 mm Character Height |
| Interface | RS-232C Bidirectional |
| Operating Languages | 5 (English, German, French, Spanish, Chinese) |
| Compliance | ISO/IEC 17025, GLP/GMP-ready, FDA 21 CFR Part 11 compatible via optional software |
| Brand | EXAKT |
|---|---|
| Origin | Germany |
| Model | 80Eplus |
| Instrument Type | Three-Roll Mill |
| Sample Compatibility | Soft, paste-like, and viscous materials (e.g., inks, paints, cosmetics, battery slurries) |
| Feed Particle Size | 5–180 µm |
| Final Output Particle Size | ≤1 µm |
| Minimum Achievable Gap | 5 µm |
| Maximum Line Pressure | 26 N/mm (gap-dependent) |
| Throughput at 10 µm Gap | 10 mL–18 L/hr |
| Roller Surface Options | Chrome-plated steel, tungsten carbide, aluminum oxide, or silicon carbide |
| Dimensions (W × D × H) | 591 × 608 × 602 mm |
| Installed Footprint Recommendation (W × D) | 1200 × 700 mm |
| Weight | 112–125 kg |
| Cooling Interface | 10 mm inlet / 13 mm outlet |
| Max Inlet Coolant Temperature | 55 °C |
| Operating Ambient Temperature | 10–30 °C |
| Power Supply Option 1 | 3 × 380–420 V / 50–60 Hz, 1300 W |
| Power Supply Option 2 | 3 × 200–240 V / 50–60 Hz, 1300 W |
| Control Interface | 8.4″ color TFT touchscreen with real-time parameter logging (gap, torque, roller temperature, motor power, time stamp) |
Show next