- All
- Favorite
- Popular
- Most rated
| Brand | Occhio |
|---|---|
| Origin | Belgium |
| Model | SCAN Series |
| Particle Size Range | 10 µm – 50 mm (extendable to 2 µm – 20 cm) |
| Optical Resolution | Up to 600 Mpx (Scan 700) |
| Illumination | Broadband white light (350–640 nm), transmission + reflection modes |
| Imaging Sensor | High-speed CCD linear array |
| Software | Callisto 2D/3D |
| Dispersion | Dry-mode linear disperser with anti-adhesion metal coating |
| Sample Stage | 242 × 320 mm (Scan 700) |
| Compliance | ASTM D7927, ISO 9276-6, USP <1788>, GLP-ready audit trail in Callisto |
| Brand | YiHeng (Shanghai Yi Heng) |
|---|---|
| Origin | Shanghai, China |
| Model | BPHJS Series |
| Temperature Range | −60 °C to +130 °C |
| Humidity Range | 30–95 %RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Fluctuation | ±3 %RH |
| Refrigerant | R134a (ozone-friendly) |
| Inner Chamber Material | AISI 304 mirror-finish stainless steel |
| Control System | Color TFT touchscreen with programmable logic (120 programs × 99 segments, up to 999 cycles) |
| Communication Interface | RS-232/RS-485, USB data export (SD card), optional 485 printer interface |
| Safety Protections | Independent over-temperature cutoff, compressor overheat/overcurrent/overload protection, fan overheat protection, low-water alarm |
| Power Supply | AC 380 V, 50 Hz (models with −40 °C or −60 °C capability) |
| Brand | LUM |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LUMiFrac |
| Quotation | Upon Request |
| Principle | Centrifugal Fracture Testing (Dynamic Load Application via Rotating Rotor) |
| Max. Centrifugal Force Range | 0.1 N – 6.5 kN |
| Rotational Speed Range | 100 – 13,000 rpm |
| Tensile Strength Measurement Range | up to 80 MPa |
| Sample Capacity | 8 parallel specimens |
| Sample Dimensions | max. 30 × 30 × >1 mm³ |
| Bonded Area Diameter | 7 mm, 10 mm or custom |
| Bonded Surface Materials | metallic & non-metallic substrates |
| Specimen Mass Range | 4.1 g – 38.7 g (Cu/W-based reference: ~58 g) |
| Temperature Control Range | −11 °C to +40 °C |
| Measurement Duration | 1 min – 99 h |
| Compliance | ISO 4624, DIN EN 15870, DIN EN 14869-2, JIS K 5600-5-7 |
| Data Interface | USB |
| Power Supply | 100/120/230 V, 50/60 Hz |
| Max. Power Consumption | 1050 W |
| Net Weight | 56 kg |
| Dimensions (W×H×D) | 380 × 296 × 640 mm³ |
| Software Platform | SEPView® v6.x with real-time critical force calculation, statistical comparison, GLP-compliant audit trail, and FDA 21 CFR Part 11-ready user access control |
| Brand | SHASHIN KAGAKU |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | SQ-9000 |
| Pricing | Upon Request |
| Effective Measurement Range (X×Y×Z) | 700 × 900 × 60 mm |
| Maximum Workpiece Dimensions (X×Y×Z) | 1000 × 1250 × 60 mm |
| Maximum Workpiece Thickness | 60 mm |
| Minimum Readout Unit | 0.1 µm |
| XY Measurement Accuracy | U₁ = (3 + L/250) µm, U₂ = (4 + L/230) µm |
| Z-Axis Measurement Accuracy | (1.5 + 4L/1000) µm |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Model | DIN |
| Compliance | DIN 53019 / ASTM D2196 Equivalent |
| Sample Volume | 16–20 mL |
| Geometry | Cylindrical Couette-type |
| Shear Rate Definition | Well-defined, geometry-determined |
| Viscosity Range (by spindle/viscometer combination) | 1.0–50,000 mPa·s (cP) |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Model | KU-2 |
| Instrument Type | Rotational Viscometer |
| Measurement Range | 40–141 KU (Krebs Units), 32–1099 g, 27–5274 cP |
| Compliance | ASTM D562, ISO 2555, GB/T 9269 |
| Output | Analog voltage (0–5 V DC) for optional printer or data logger |
| Sample Volume | ~500 mL |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Dimensions | 22.9 × 15.2 × 30.5 cm |
| Weight | 6.8 kg |
| Brand | LUM |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | LUMiReader PSA |
| Pricing | Upon Request |
| Brand | DT Instruments |
|---|---|
| Origin | USA |
| Model | DT-300 / DT-310 |
| Measurement Principle | Electroacoustic (Colloid Vibration Current, CVI) |
| Zeta Potential Range | Unlimited (down to ±0.1 mV) |
| Sample Concentration | 0.1–50% v/v (no dilution required) |
| Minimum Sample Volume | 2 mL |
| Measurable Parameters | Zeta potential, dynamic electrophoretic mobility, Debye length, particle size distribution (via optional ultrasound attenuation spectroscopy), rheological properties (viscoelastic moduli), solid content, porosity |
| Software Platform | Microsoft Access-based database with audit trail capability |
| Optional Module | Automated titration system (DT-310 only) |
| Compliance Context | Designed for GLP/GMP-aligned laboratories |
| Brand | Occhio |
|---|---|
| Origin | Belgium |
| Model | Zephyr LDA / Zephyr ESR / Morpho 3 |
| Dry Measurement Range (Zephyr LDA) | 7 µm – 5000 µm |
| Wet Measurement Range (Zephyr LDA) | 1 µm – 3000 µm |
| Dry Measurement Range (Zephyr ESR) | 30 µm – 30 mm (extendable lower limit) |
| Dry Measurement Range (Morpho 3) | 500 µm – 10,000 µm |
| Analysis Time | 1–3 min per sample |
| Camera System | 5 MP CCD (Zephyr LDA/ESR), dual 1.3 MP (Morpho 3: 24-bit color front + 8-bit monochrome side) |
| Light Source | 440 nm blue LED (Zephyr LDA/ESR), dual diffuse white LED + monochromatic LED (Morpho 3) |
| Lens Type | Telecentric (Zephyr LDA), dual telecentric (Zephyr ESR), fixed-focus (Morpho 3) |
| Dispersion | Vibratory feed + transverse vacuum (Zephyr LDA), gravity-assisted vibration (Zephyr ESR), controlled rotary vibration + linear belt transport (Morpho 3) |
| Auto-Cleaning | Compressed air + vacuum (all models) |
| Software | Callisto 3D |
| Compliance | ISO 13322-2, ASTM E2927, FDA 21 CFR Part 11 (with optional 3Q validation: IQ/OQ/PQ) |
| Dimensions & Weight | Zephyr LDA: 85 × 47 × 64 cm, 52 kg |
| Zephyr ESR | 80 × 44 × 60 cm, 43 kg |
| Morpho 3 | 99 × 52 × 60 cm, 75 kg |
| Brand | LISICO |
|---|---|
| Model Series | SRV / SRD / DVP / DVM |
| Measurement Principle | Torsional Resonance (Viscosity & Density) |
| Viscosity Range | 0–3,000 mPa·s (cP), up to 50,000 mPa·s (cP) optional |
| Density Range | 0–1.5 g/mL, extended range available |
| Viscosity Accuracy | ±1% of reading or better (customizable) |
| Density Accuracy | ±0.01 g/mL standard, ±0.001 g/mL optional |
| Viscosity Resolution | 0.001 mPa·s (cP) |
| Density Resolution | 0.001 g/mL |
| Temperature Sensor | Pt1000 (Class B or AA), integrated |
| Operating Temp | −50 to +300 °C (model-dependent) |
| Pressure Rating | up to 207 MPa (30,000 psi) |
| Wetted Materials | 316L SS or Titanium Grade 5 |
| Enclosure Rating | IP68/IP69, Ex ia IIC T2–T6 |
| Response Time | <1 s |
| Sample Volume | 0.7 mL |
| Electrical Interface | M12 connector or fixed cable |
| Process Connection | 3/4″ NPT, sanitary clamp, 1″ NPT, or 1/4″ HP (9/16-18 UNF) |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Instrument Type | Rotational Viscometer |
| Model | DV-II+Pro EXTRA |
| Bearing System | Precision Ball-Bearing Suspension (excludes LV models) |
| Speed Range | 0.1–200 rpm (54 programmable speeds) |
| Viscosity Accuracy | ±1.0% of reading |
| Repeatability | ±0.2% |
| Displayed Parameters | Viscosity (cP or mPa·s), Temperature (°C or °F), Shear Rate/Shear Stress, % Torque, Rotational Speed, Rotor ID, Timed Stop Countdown |
| Included Accessories | EZ-Lock Quick-Connect Rotor System, Q-Drive Vertical Positioning Stand, Integrated Temperature Probe, RheoCalc Software, DV Loader Software, Standard Rotor Set (4 for LV |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HCP108 |
| Instrument Type | Upright Environmental Test Chamber |
| Internal Volume | ~108 L |
| Interior Dimensions (W×H×D) | 560 × 480 × 400 mm |
| Exterior Dimensions (W×H×D) | 710 × 778 × 550 mm |
| Interior Material | Electropolished Stainless Steel (Deep-Drawn) |
| Exterior Material | Stainless Steel Body with Galvanized Steel Rear Panel |
| Temperature Range (without humidity control) | 20–160 °C |
| Temperature Range (with humidity control) | 20–90 °C |
| Temperature Uniformity (per DIN 12880 at 50 °C) | ≤ ±0.3 °C |
| Temperature Stability (per DIN 12880 at 50 °C) | ≤ ±0.15 °C |
| Humidity Range | 20–95 % RH (capacitive sensor, sterilizable) |
| Humidity Control | Microprocessor-driven steam generation + desiccant-based dehumidification |
| Power Supply | 230 V / 50–60 Hz |
| Max. Power Consumption | ~1000 W |
| Net Weight | ~70 kg |
| Gross Weight | ~78 kg |
| Standard Accessories | 2 stainless steel sliding shelves (556 × 361 mm), factory calibration certificate (60 °C center point), Celsius 2005 software (standard), internal memory card (1024 KB ring buffer, ~3 months @ 1-min interval) |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Models | LV, RV/HA/HB, UL, DIN, RST, Thermosel, SSA, KU-2, T-Bar, Spiral Adapter, Vane Spindles |
| Material Options | 302/316 Stainless Steel, PTFE-Coated |
| Calibration | Factory-Calibrated Cones & Cups |
| Compliance | ASTM D2196, ISO 2555, USP <911>, FDA 21 CFR Part 11 (Software-Enabled Systems) |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | Analysette 3 |
| Compliance | ISO 3310, ASTM E11, DIN 66165, EN 10204 3.1B |
| Measurement Range (Dry) | 32 µm – 63 mm |
| Measurement Range (Wet) | 20 µm – 10 mm |
| Measurement Range (Micro-fine) | 5 µm – 100 µm |
| Max Sieve Stack (50 mm) | 10 trays |
| Max Sieve Stack (25 mm) | 16 trays |
| Sample Capacity (Dry, <100 µm) | >100 kg |
| Sample Capacity (Dry, <25 mm) | >1 kg |
| Sample Capacity (Wet) | 20–100 g |
| Sample Capacity (Micro-fine) | 0.2–0.5 g |
| Sieving Duration (Dry) | 3–20 min |
| Sieving Duration (Wet) | 3–10 min |
| Sieving Duration (Micro-fine) | 30–60 min |
| Amplitude Display | Digital (mm) |
| Frequency Display | Digital (Hz) |
| Control Interface | RS232 |
| Software | AUTOSIEVE™ |
| IP Rating | IP65 |
| Tension Control | Electronic torque-controlled sieve clamping system |
| Brand | RHEOTECH |
|---|---|
| Origin | Japan |
| Model | FUDOH RTC-3002D |
| Load Capacity | ±200 N |
| Stroke Range | 0.1–99.9 mm (0.1 mm resolution) |
| Test Speed Options | 2, 5, 6, 10, 20, 30 cm/min or 5, 6, 10, 20, 30, 60 cm/min |
| Display | Triple 3-digit LED (force, displacement, time) |
| Auto-zero Function | Yes |
| Power Supply | 220–250 V AC, 50/60 Hz |
| Dimensions | 260 W × 430 H × 280 D mm |
| Weight | 15 kg |
| Compliance | Designed for ISO 11357, ASTM F3165, USP <1043>, and GLP-compliant texture analysis workflows |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Model | LVT/RVT |
| Type | Analog Dial Viscometer |
| Standard Spindles | LVT includes LV#1–LV#4 |
| Motor | Multi-speed, low-noise synchronous motor |
| Compliance | Designed to support ASTM D2196, ISO 2555, and USP <911> viscosity testing protocols |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Model | Helipath |
| Application | Vertical traverse accessory for rheological characterization of yield-stress and structured materials |
| Compatibility | Designed for Brookfield DV series viscometers (DVLV, DVM, DV2T, DV3T) and DVNext Advanced Rotational Rheometers |
| Drive Mechanism | Motorized bidirectional vertical translation |
| Motion Profile | Continuous helical path generation via synchronized vertical displacement and instrument rotation |
| Transducer Interface | Standard Brookfield quick-coupling spindle mount |
| Included Components | Helipath stand, T-bar spindle adapter, optional T-bar spindle set (6 sizes) |
| Operating Speed Range | 0.1–20 rpm (instrument-dependent) |
| Viscosity Range (typical, at 0.1 rpm) | LV: 156–3.12×10⁶ cP |
| RV | 2×10³–2×10⁷ cP |
| HA | 4×10³–4×10⁷ cP |
| HB | 1.6×10⁴–1.6×10⁸ cP |
| Units | cP (mPa·s) |
| Brand | Shashin Kagaku |
|---|---|
| Origin | Japan |
| Model | PV Cell Grid Line 3D Profilometer |
| Measurement Principle | White-Light Interferometry |
| Light Source Options | White LED (430–700 nm, >50,000 h), Tungsten-Halogen (400–900 nm, 10,000 h), Deuterium-Halogen (220–900 nm, 1,000 h) |
| Objective Lenses | 1× (FOV 6.6 × 8.8 mm, Optical Resolution 11 µm, Working Distance 15 mm), 5× (FOV 1.32 × 1.76 mm, Optical Resolution 2.3 µm, Working Distance 4 mm), 50× (FOV 0.132 × 0.176 mm, Optical Resolution 0.51 µm, Working Distance 3 mm) |
| Measurement Capabilities | Simultaneous 3D topography, line width (LW), line height (LH), sidewall angle, step height, roughness (Sa, Sq), and edge definition for metallized grid lines on silicon solar cells |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | Analysette 18 |
| Measurement Principle | Dry Mechanical Vibratory Sieving |
| Max. Sample Capacity | 15 kg (standard), up to 25 kg with optional large-diameter sieve stack |
| Sieve Aperture Range | 20 µm – 125 mm |
| Max. Sieve Diameter | 450 mm (18") |
| Sieving Time | 5–60 min |
| Drive System | Dual Asymmetric Counter-Rotating Motors |
| Compliance | ISO 2591-1, ISO 9276-1, ASTM E11, USP <786> |
| Software | AUTOSIEVE v5.x (FDA 21 CFR Part 11 compliant audit trail & user access control) |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Model | CAP1000+, CAP2000+ |
| Instrument Type | Rotational Viscometer (Cone-Plate Geometry) |
| Torque Range | High Torque (181,000 dyne·cm) / Low Torque (7,970 dyne·cm) |
| Shear Rate Range | 0.2–15,000 s⁻¹ (dependent on cone spindle and speed selection) |
| Sample Volume | 24–1700 µL |
| Temperature Control | L-Series (5–75°C), H-Series (50–235°C) |
| Display | 4-line LCD |
| Compliance | ASTM D4287, ISO 2884, BS 3900, GB/T 9751 |
| Software | CapCalc32 (PC-based control, data acquisition, rheological modeling) |
| Brand | LISICO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic (China-made) |
| Model | LS-V |
| Pricing | Upon Request |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Model | DV2T |
| Instrument Type | Benchtop Rotational Viscometer |
| Viscosity Range | 1 to 320 × 10⁶ mPa·s (cP) |
| Speed Control | 0.01–200 rpm (200 programmable increments) |
| Accuracy | ±1.0% of full-scale reading |
| Repeatability | ±0.2% |
| Temperature Measurement | Integrated RTD probe (±0.1 °C typical) |
| Display | 5-inch full-color touchscreen |
| Compliance | FDA 21 CFR Part 11 (electronic signatures, user access levels, audit trail) |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DVNext |
| Instrument Type | Rotational Rheometer |
| Sample State | Liquid |
| Bearing Type | Mechanical Bearing |
| Minimum Speed | 0.01 rpm |
| Maximum Speed | 250 rpm |
| Sample Volume | 0.5–2.0 mL |
| Shear Rate Range | Up to 1875 s⁻¹ (with CP-52Z) |
| Torque Accuracy | ±1.0% of Full Scale |
| Repeatability | ±0.2% |
| Temperature Range | 0–100 °C |
| Geometry | Cone-and-plate |
| Control Interface | Integrated Touchscreen Display |
| Auto-Zero Function | Yes |
| Auto-Range Torque Measurement | Yes |
| Wetted Materials | 316 Stainless Steel |
| Optional Accessories | Luer fittings, embedded Pt100 temperature probe, cleaning adapters |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Model | PVS |
| Instrument Type | Rotational Rheometer |
| Sample State | Liquid |
| Bearing Type | Mechanical Bearing |
| Minimum Speed | 0.05 rpm |
| Maximum Speed | 1000 rpm |
| Shear Rate Range | 0.02–1700 s⁻¹ |
| Pressure Range | Vacuum to 1000 psi |
| Temperature Range | −40 °C to +260 °C |
| Viscosity Range | 0.5–36×10⁶ mPa·s (cP) |
| Geometry | Couette (rotating outer cup, stationary inner bob) |
| Temperature Sensor | RTD mounted on inner bob surface |
| Construction Material | Hastelloy C outer cup and bob |
| Compliance | ASTM D2196, ISO 3219, USP <911> |
Show next