- All
- Favorite
- Popular
- Most rated
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | WNB22 |
| Instrument Type | Circulating Water Bath |
| Internal Volume | 22 L |
| Temperature Range | 10 °C to 95 °C (with optional boiling mode at 100 °C) |
| Temperature Stability | ±0.1 °C (typical, at 37 °C, load-free) |
| Temperature Resolution & Setpoint Accuracy | 0.1 °C |
| Control System | PID with self-diagnostic function |
| Sensor | Dual 4-wire Pt100 (E-type), single 4-wire Pt100 (B-type) |
| Overtemperature Protection | Triple-stage (E-type) / Dual-stage (B-type) |
| Timer Range | B-type: 1 min – 99 h 59 min |
| E-type | 1 min – 999 h |
| Power Rating | 2000 W |
| Construction | Stainless steel inner bath and outer housing (AISI 304) |
| Certifications | CE, tested to IEC 61010-1 for laboratory safety |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | BW-12 / BWS-12 / BW-27 / BWS-27 (with magnetic drive pump) |
| Temperature Range | RT+5°C to 100°C (BW series), RT+5°C to 80°C (BWS series) |
| Temperature Stability | ±0.2°C |
| Resolution | 0.1°C |
| Effective Volume | 11 L (BW-12/BWS-12), 20 L (BW-27/BWS-27) |
| Inner Tank Dimensions | 300×240×200 mm (BW-12/BWS-12), 500×300×200 mm (BW-27/BWS-27) |
| Power Supply | AC 220 V, 50 Hz |
| Heating Power | 800 W (BW-12), 1000 W (BWS-12 & BWS-27) |
| Timer Range | 0–9999 min |
| Circulation Type | Internal recirculation only |
| Control Mode | Heating-only PID temperature regulation |
| Safety Features | Independent dry-run protection, dual-limit overtemperature cutoff |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L5 11 B410 |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Power Rating | 2.4 kW |
| Heating Time to Max Temp | 60 min |
| Internal Dimensions (W×D×H) | 200 × 170 × 130 mm |
| Chamber Volume | 5 L |
| Heating Method | Electric (Dual-Sided Ceramic Heating Plates with Embedded Resistance Wire) |
| Insulation | High-Density Ceramic Fiber |
| Housing | Double-Walled Stainless Steel (Brushed Finish) |
| Weight | 30 kg |
| Electrical Supply | Single-Phase |
| Brand | Yi Heng (Shanghai Yi Heng) |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | DKZ Series |
| Instrument Type | Constant-Temperature Shaking Bath |
| Circulation Mode | Internal & External Circulation |
| Temperature Control | Heating-Only |
| Bath Capacity | Model-Dependent (e.g., DKZ-1: 34 L |
| DKZ-2 | 48 L |
| DKZ-3 | 33 L) |
| Temperature Range | RT+5°C to 99°C (DKZ-1/DKZ-2/DKZ-3) / 10°C to 99°C (DKZ-2B/DKZ-3B) |
| Temperature Stability | ±0.3°C at setpoint (typical, under controlled ambient conditions) |
| Temperature Resolution | 0.1°C |
| Uniformity | ±1.0°C across bath volume (empty, 20°C ambient) |
| Oscillation Frequency | 30–180 rpm (infinitely variable) |
| Amplitude | 30 mm or 40 mm (user-selectable per order) |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 1250 W (DKZ-1), 1650 W (DKZ-2/DKZ-2B), 1500 W (DKZ-3/DKZ-3B) |
| Interior Dimensions (W×D×H, mm) | 438×310×250 (DKZ-1), 618×310×250 (DKZ-2), 440×300×250 (DKZ-3) |
| Exterior Dimensions (W×D×H, mm) | 643×350×353 (DKZ-1), 823×350×355 (DKZ-2), 710×410×710 (DKZ-3) |
| Construction | Stainless steel inner tank (SUS304 standard) |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic (China-Made) |
| Model Series | GRX Series |
| Instrument Type | High-Temperature Forced-Air Oven |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Temperature Uniformity | ±1°C |
| Heating Method | Forced Convection with Adjustable Fan Speed |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | DU-20 / DU-30 / DU-30G |
| Bath Volume | 12 L / 20 L |
| Temperature Range | RT+20 °C to 200 °C |
| Temperature Stability | ±0.5 °C |
| Control Mode | Heating-only PID |
| Circulation Type | Internal & External |
| Stirring | Magnetic (DU-20G/DU-30G only) |
| Power Input | 1000 W (DU-20/DU-20G/DU-30G), 1600 W (DU-30) |
| Timer Range | 0–9999 min |
| Alarm Threshold | +2 °C above setpoint |
| Inner Chamber Dimensions (W×D×H) | 250×250×200 mm (DU-20/DU-20G), 400×250×200 mm (DU-30/DU-30G) |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | LT15/11 B410 |
| Type | Box-type Muffle Furnace |
| Max. Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Rated Power | 3.5 kW |
| Heating Time to Max. Temp. | 90 min |
| Internal Dimensions (W×D×H) | 230 × 340 × 170 mm |
| Chamber Volume | 3 L |
| External Dimensions (W×D×H) | 415 × 555 × 755 mm (incl. base height) |
| Weight | 40 kg |
| Heating Method | Electric, Dual-sided Ceramic Heating Plates with Embedded Resistance Wire |
| Insulation | High-purity Alumina-Silica Fiber |
| Housing | Double-walled Stainless Steel (Brushed Finish) |
| Controller | B410 Programmable 4-Stage PID Controller with NTLog Data Logging via USB |
| Safety | EN 60519-2 Compliant Overtemperature Protection (Class 2 Thermal Cut-off), Adjustable Air Inlet, Rear Exhaust Port, Optional Catalytic Converter or Flare System |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model Series | MP, MPG, MPE, MPGE |
| Temperature Range | −50 °C to 100 °C (model-dependent) |
| Temperature Stability | ±0.02 °C (MPE/MPGE high-precision models) |
| Control Accuracy | ±0.1 °C (MP/MPG standard models) |
| Bath Opening × Depth | 150 mm × 160 mm × 150 mm (standard) / 240 mm × 170 mm × 200 mm (large-volume MPG/MPGE) |
| Reservoir Volume | 4.5 L to 13 L |
| Circulation Flow Rate | 8 L/min (adjustable) |
| Heating Power | 2300 W to 3100 W |
| Refrigeration | Eco-friendly R-404A or R-507 refrigerant |
| Power Supply | AC 220 V, 50 Hz |
| External Circulation | Yes (pressure-suction pump with dual-port interface) |
| Internal/External Dual-Circulation Mode | Yes |
| Safety Features | Over-temperature, low-temperature, and low-level liquid alarms with audible/visual alerts |
| Optional | RS-485, USB data export (U-disk), printer interface, multi-segment programmable controller (7 programs × 63 steps, time per step: 1–99 h 59 min) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | HBR 4 control |
| Heating Power | 1000 W |
| Max. Bath Volume | 4 L |
| Temp. Range | RT to 200 °C |
| Temp. Control Accuracy | ±1 K (water, 90 °C) / ±2 K (silicone oil, 150 °C) |
| Stirring Speed Range | 150–800 rpm |
| Safety Temp. Range | 50–210 °C |
| Display | Digital LCD (set temp., actual temp., safety temp., speed) |
| Interface | RS 232 |
| External Sensor Support | PT1000 |
| Protection Class | IP20 |
| Dimensions (W×D×H) | 340 × 250 × 340 mm |
| Weight | 4.4 kg |
| Power Supply | 230/115/100 V, 50/60 Hz |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L5/11/B180 |
| Max Operating Temperature | 1100 °C |
| Internal Dimensions (W×D×H) | 200 × 170 × 130 mm |
| Chamber Volume | 5 L |
| External Dimensions (W×D×H) | 440 × 470 × 520 mm |
| Power Supply | 2.4 kW, Single-phase |
| Weight | 35 kg |
| Heating Time to Max Temp | ~60 min |
| Controller Type | B180 Programmable Digital Controller with Color Graphic Display |
| Programmable Steps | 2 per program (1 program memory) |
| Heating Method | Dual-sided ceramic heating plates with embedded resistance wire |
| Insulation | Vacuum-reinforced fiber modules |
| Construction | Double-walled stainless steel housing (brushed finish) |
| Door Options | Optional tilting door (standard for L5/11 series) or lifting door (LT variant) |
| Safety | EN 60519-2 Class 2 overtemperature protection limiter |
| Gas Inlet | Rear-mounted protective gas interface |
| Ventilation | Adjustable air inlet on door, exhaust outlet on rear wall |
| Optional Accessories | Exhaust chimney with fan or catalytic converter, kWh meter, programmable socket |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L9 11 B410 |
| Type | Box-Type Muffle Furnace |
| Max. Operating Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Rated Power | 3.0 kW |
| Heating Time to 1100 °C | 75 min |
| Internal Dimensions (W×D×H) | 230 × 240 × 170 mm |
| Chamber Volume | 9 L |
| Heating Method | Electric (Dual-Sided Ceramic Heating Panels with Embedded Resistance Wire) |
| Insulation | High-Density Ceramic Fiber |
| Housing | Double-Walled Stainless Steel (Brushed Finish) |
| Weight | 35 kg |
| Power Supply | Single-Phase |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Model | OGS180 |
| Instrument Type | Precision General-Purpose Oven |
| Temperature Range | 50–250 °C |
| Temperature Uniformity (at 150 °C) | ±4 °C |
| Temperature Stability (at 150 °C) | ±0.4 °C |
| Chamber Dimensions (W×H×D) | 438×680×589 mm |
| External Dimensions (W×H×D) | 640×920×738 mm |
| Chamber Volume | 176 L |
| Chamber Material | Stainless Steel 1.4016 (EN 10088-1) |
| Heating Method | Natural Convection |
| Floor Area | 0.47 m² |
| Standard Shelves | 2 (max. 19) |
| Max. Shelf Load | 25 kg |
| Power Supply | 230 V / 50 Hz |
| Rated Power | 3100 W (13.5 A) |
| Net Weight | 66 kg |
| Interface | RS232 serial port |
| Display | Vacuum Fluorescent Display (VFD) |
| Timer Function | On/Off programmable |
| Door Opening Angle | 180° |
| Over-Temperature Protection | Automatic cut-off with audible alarm |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L3 11 B410 |
| Type | Box-Type Muffle Furnace |
| Max. Operating Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Rated Power | 1.2 kW |
| Heating Time to 1100 °C | 60 min |
| Internal Dimensions (W×D×H) | 160 × 140 × 100 mm |
| Chamber Volume | 3 L |
| External Dimensions (W×D×H) | 385 × 330 × 405 mm |
| Weight | 20 kg |
| Heating Method | Electric (Dual-Sided Ceramic Heating Panels with Embedded Resistance Wires) |
| Insulation | High-Density Ceramic Fiber |
| Housing | Double-Walled Stainless Steel (Brushed Finish) |
| Controller | B410 Programmable 4-Stage Digital Controller with USB Data Logging (NTLog Basic Software) |
| Brand | TRILOS |
|---|---|
| Model | HC250 |
| Origin | USA |
| Instrument Type | Circulating Bath |
| Temperature Range | −10 °C to +90 °C |
| Heating Power | 600 W |
| Cooling Capacity | 250 W @ 20 °C ambient / 20 °C bath setpoint |
| Pump Flow Rate (Max) | 8 L/min |
| Voltage/Frequency | 220 V~, 50 Hz |
| Rated Current | 10 A |
| IP Rating | IP20 |
| Refrigerant | R404A |
| Dimensions (W×D×H) | 250 mm × 480 mm × 535 mm |
| Circulation Mode | Internal & External |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L15/11/B410 |
| Type | Box-Type Muffle Furnace |
| Max. Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Rated Power | 3.5 kW |
| Heating Time to Max. Temp. | 90 min |
| Internal Dimensions (W×D×H) | 230 × 340 × 170 mm |
| Chamber Volume | 9 L |
| Heating Method | Electric (Dual-Sided Ceramic Heating Panels with Embedded Resistance Wire) |
| Construction | Double-Walled Stainless Steel Housing (Brushed Finish), Ceramic Fiber Insulation, Safety-Grade Refractory Liner |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Instrument Type | Box-type Muffle Furnace |
| Model | LVT15 11 B410 |
| Max. Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Rated Power | 3.5 kW |
| Heating Time to Max. Temp. | 120 min |
| Internal Dimensions (W×D×H) | 230 × 340 × 170 mm |
| Chamber Volume | 3 L |
| Heating Method | Electric (Embedded Resistance Wire in Dual-Sided Ceramic Heating Plates) |
| Air Exchange Rate | >6 air changes per minute with preheated inlet air |
| Insulation Material | High-purity ceramic fiber |
| Housing | Double-walled stainless steel (brushed finish) |
| Controller | B410 Programmable 4-Stage PID Controller with NTLog Data Logging via USB |
| Safety Compliance | EN 60519-2, Thermal Protection Class 2 (Overtemperature Cut-off) |
| Weight | 55 kg |
| Electrical Supply | Single-phase |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | TR1050 |
| Instrument Type | General-Purpose Forced-Air Drying Oven |
| Temperature Range | +5 °C to 300 °C |
| Temperature Uniformity | ±1 °C (at 100 °C, load-free, per DIN 12880) |
| External Dimensions (W×D×H) | 1470 × 940 × 1920 mm |
| Internal Chamber Dimensions (W×D×H) | 1200 × 670 × 1400 mm |
| Internal Volume | 1050 L |
| Chamber Material | AISI 304 Stainless Steel (1.4301) |
| Heating Method | Horizontal Forced-Air Circulation via Adjustable-Speed Fan |
| Power Supply | 3-Phase, 9 kW |
| Net Weight | 450 kg |
| Standard Shelf Quantity | 4 Perforated Wire Shelves |
| Max. Load Capacity | 250 kg total (≤30 kg per shelf) |
| Compliance | EN 1539, EN 60519-2 Class 2 Thermal Protection, DIN 12880 |
| Brand | Yi Heng (Shanghai Yi Heng) |
|---|---|
| Origin | Shanghai, China |
| Model | PH Series |
| Instrument Type | Precision Forced-Air Oven |
| Temperature Range | RT+5–80 °C (Incubation Mode) |
| Temperature Uniformity | ±3% at 100 °C |
| Temperature Fluctuation | ±0.5 °C (Incubation) |
| Temperature Resolution | 0.1 °C |
| Heating Method | Forced-air convection |
| Power Input | 650–2450 W (model-dependent) |
| Working Environment | +5 to +35 °C |
| Timer Range | 0–5999 min |
| Standard Shelving | 2 adjustable stainless-steel shelves |
| Interior Material | Mirror-finish stainless steel |
| Door Seal | Silicone rubber gasket with double-layer tempered glass viewport |
| Safety Interlock | Automatic heating and fan shutoff upon door opening |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | DHG Series |
| Oven Type | Natural Convection Hot Air Drying Oven |
| Temperature Range | RT+10°C to 200°C |
| Temperature Uniformity | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Interior Material | Stainless Steel (304) |
| Heating Method | Gravity Convection |
| Power Input | 850–2200 W (model-dependent) |
| Chamber Volume | 27–220 L |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | SW23 |
| Instrument Type | Constant-Temperature Shaking Water Bath |
| Circulation | Internal & External |
| Temperature Control | Heating-Only |
| Bath Volume | 8–20 L |
| Temperature Range | 20–99.9 °C |
| Temperature Stability | ±0.02 °C |
| Heating Power | 2000 W |
| Orbital Shaking Speed | 20–200 rpm |
| Display Resolution | 0.1 °C |
| Protection Rating | IP43 (IEC 529) |
| Safety Class | DIN 12876-1 Class 1 |
| Bath Opening/Depth (W×L/D) | 50×30 / 18 cm |
| External Dimensions (W×L×H) | 70×35×26 cm |
| Weight | 23 kg |
| Ambient Operating Temperature | 5–40 °C |
| Interface | RS232 |
| Calibration | User-Executable Onboard Calibration |
| Accessories | Optional Makrolon® bath cover, test tube racks, Erlenmeyer flask clamps, separatory funnel holders, anti-evaporation floats |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9003 (Drying Oven Series) |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C (customizable) |
| Temperature Uniformity | ±3% at 100°C |
| Temperature Fluctuation | ±1°C |
| Temperature Resolution | 0.1°C |
| Heating Method | Forced-air convection |
| Power Supply | AC 220 V, 50 Hz |
| Timer Range | 0–9999 min |
| Interior Dimensions (W×D×H) | 250 × 260 × 250 mm |
| Exterior Dimensions (W×D×H) | 530 × 370 × 420 mm |
| Shelving | 2 stainless steel shelves |
| Construction | Mirror-finish 304 stainless steel interior |
| Sealing | High-temperature silicone gasket |
| Optional | RS485 interface, thermal printer output, independent over-temperature cutoff |
| Brand | Shanghai Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model Variants | BWS-5, BWS-10, BWS-20, BWS-0505, BWS-0510 |
| Temperature Range | RT+5°C to 99°C |
| Temperature Stability | ±0.3°C |
| Power Consumption | 600–2050 W (model-dependent) |
| Inner Chamber Dimensions (W×D×H, mm) | 280×130×150 to 490×290×150 |
| External Dimensions (W×D×H, mm) | 396×250×260 to 600×390×260 |
| Timer Range | 0–5999 min |
| Safety Features | Dry-run protection, independent over-temperature cutoff, deviation alarm (±2°C) |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L5/12/P330 |
| Max Temperature | 1200 °C |
| Internal Dimensions (W×D×H) | 200 × 170 × 130 mm |
| Chamber Volume | 5 L |
| External Dimensions (W×D×H) | 440 × 470 × 520 mm |
| Power Supply | 1-phase, 2.4 kW |
| Net Weight | 35 kg |
| Heating Time to Max Temp | ~75 min |
| Controller | P330 Programmable Digital Controller (9 programs, 40 segments, color graphic display, 1 °C/1 min resolution, skip function, manual MV override, kWh counter, real-time clock, self-optimizing PID) |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Model | OGH180-S |
| Instrument Type | Precision Drying Oven |
| Temperature Range | 50–330 °C |
| Temperature Uniformity (at 150 °C) | ±2.9 °C |
| Temperature Accuracy (at 150 °C) | ±0.3 °C |
| Chamber Volume | 168 L |
| Internal Dimensions (W×H×D) | 438 × 680 × 564 mm |
| External Dimensions (W×H×D) | 640 × 920 × 738 mm |
| Chamber Material | Stainless Steel 1.4016 (AISI 430) |
| Heating Method | Natural Convection |
| Standard Shelves | 2 (max. 19) |
| Max. Load per Shelf | 25 kg |
| Rated Voltage/Frequency | 230 V / 50 Hz |
| Power Rating | 3100 W |
| Weight | 69 kg |
| Footprint Area | 0.47 m² |
Show next