- All
- Favorite
- Popular
- Most rated
| Brand | YiHeng (Shanghai Yi Heng) |
|---|---|
| Origin | Shanghai, China |
| Model | BPHJS Series |
| Temperature Range | −60 °C to +130 °C |
| Humidity Range | 30–95 %RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Fluctuation | ±3 %RH |
| Refrigerant | R134a (ozone-friendly) |
| Inner Chamber Material | AISI 304 mirror-finish stainless steel |
| Control System | Color TFT touchscreen with programmable logic (120 programs × 99 segments, up to 999 cycles) |
| Communication Interface | RS-232/RS-485, USB data export (SD card), optional 485 printer interface |
| Safety Protections | Independent over-temperature cutoff, compressor overheat/overcurrent/overload protection, fan overheat protection, low-water alarm |
| Power Supply | AC 380 V, 50 Hz (models with −40 °C or −60 °C capability) |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HCP108 |
| Instrument Type | Upright Environmental Test Chamber |
| Internal Volume | ~108 L |
| Interior Dimensions (W×H×D) | 560 × 480 × 400 mm |
| Exterior Dimensions (W×H×D) | 710 × 778 × 550 mm |
| Interior Material | Electropolished Stainless Steel (Deep-Drawn) |
| Exterior Material | Stainless Steel Body with Galvanized Steel Rear Panel |
| Temperature Range (without humidity control) | 20–160 °C |
| Temperature Range (with humidity control) | 20–90 °C |
| Temperature Uniformity (per DIN 12880 at 50 °C) | ≤ ±0.3 °C |
| Temperature Stability (per DIN 12880 at 50 °C) | ≤ ±0.15 °C |
| Humidity Range | 20–95 % RH (capacitive sensor, sterilizable) |
| Humidity Control | Microprocessor-driven steam generation + desiccant-based dehumidification |
| Power Supply | 230 V / 50–60 Hz |
| Max. Power Consumption | ~1000 W |
| Net Weight | ~70 kg |
| Gross Weight | ~78 kg |
| Standard Accessories | 2 stainless steel sliding shelves (556 × 361 mm), factory calibration certificate (60 °C center point), Celsius 2005 software (standard), internal memory card (1024 KB ring buffer, ~3 months @ 1-min interval) |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HPP750 |
| Instrument Type | Upright Environmental Test Chamber |
| Temperature Range | 0–70 °C (without illumination) |
| Humidity Range | 10–90 %RH (without illumination) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Deviation | ±2 %RH |
| Heating Rate | 5 °C/min |
| Internal Volume | 749 L |
| Chamber Dimensions (W×H×D) | 1040 × 1200 × 600 mm |
| External Dimensions (W×H×D) | 1224 × 1726 × 874 mm |
| Standard Shelves | 2 (max. 14) |
| Net Weight | 234 kg |
| Gross Weight | 284 kg |
| Compliance | ICH Q1A, RoHS, GLP-ready |
| Control System | P-type PID controller with 0.1 K temperature setpoint resolution and 1 %RH humidity setpoint resolution |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | TTC256 |
| Internal Volume | 256 L |
| Temperature Range | −42 °C to +190 °C |
| Heating Rate (IEC 60068-3-5) | 10 K/min (avg.) |
| Cooling Rate (IEC 60068-3-5) | 6 K/min (avg.) |
| Temp. Uniformity (setpoint-dependent) | ±0.5 K to ±2 K |
| Temp. Stability (setpoint-dependent) | ±0.2 K to ±0.5 K |
| Humidity Range (optional) | 10–98 % RH |
| Humidity Sensor | Capacitive, digital display with auto-diagnosis |
| Humidity Control | Integrated steam humidification & refrigeration-based dehumidification |
| Water Supply | Dual 10 L distilled water tanks with auto-switching |
| Dimensions (W×H×D, mm) | 898 × 1730 × 1100 (external) |
| Construction | Stainless steel interior |
| Accessories | Lockable castors, 80 mm right-side access port with plug, Pt100 Class A 4-wire temperature sensor, dual-stage overtemperature protection (electronic + mechanical), audible/visual alarms for door open, temp. deviation, empty water tank, and sensor fault |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HPP260 |
| Instrument Type | Upright Environmental Test Chamber |
| Internal Volume | 256 L |
| Internal Dimensions (W×H×D) | 640 × 800 × 500 mm |
| External Dimensions (W×H×D) | 824 × 1186 × 774 mm |
| Weight (Net/Gross) | 103 / 121 kg |
| Temperature Range (Dark) | 0–70 °C |
| Temperature Range (Illuminated) | 10–40 °C |
| Temperature Setpoint Accuracy | ±0.1 K |
| Humidity Range (Dark) | 10–90 %RH |
| Humidity Range (Illuminated) | 10–85 %RH |
| Humidity Setpoint Accuracy | ±1 %RH |
| Standard Shelves | 2 pcs (Max. 9) |
| Construction | AISI 304 Stainless Steel (1.4301) Interior |
| Cooling Technology | Peltier-based Thermoelectric System |
| Compliance | ICH Q1A(R3), RoHS, GLP-ready |
| Brand | Yi Heng (Shanghai Yi Heng) |
|---|---|
| Origin | Shanghai, China |
| Model | BPH Series / BPHJ Series |
| Temperature Range | −20 °C to 130 °C (A), −40 °C to 130 °C (B), −60 °C to 130 °C (C) |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Refrigerant | R134a (non-ozone-depleting) |
| Internal Chamber Material | AISI 304 mirror-finish stainless steel |
| Control System | Microprocessor-based digital controller (BPH) or 7-inch color TFT touchscreen with programmable logic (BPHJ) |
| Programmability | Up to 120 programs × 99 segments × 999 cycles |
| Communication Interface | RS-232 / RS-485 standard |
| Safety Protections | Independent over-temperature cut-off, compressor overheat/overcurrent/overload protection, fan overheat protection, dual-stage temperature deviation alarms |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HCP153 |
| Instrument Type | Upright Environmental Test Chamber |
| Internal Volume | ~153 L |
| Chamber Dimensions (W×H×D) | 480 × 640 × 500 mm |
| External Dimensions (W×H×D) | 630 × 938 × 650 mm |
| Interior Material | Electropolished Stainless Steel (Deep-Drawn) |
| Exterior Material | Stainless Steel Front, Galvanized Steel Rear |
| Temperature Range (without humidity control) | 20–160 °C |
| Temperature Uniformity (per DIN 12880 at 50 °C) | ≤ ±0.3 K |
| Temperature Stability (per DIN 12880 at 50 °C) | ≤ ±0.15 K |
| Humidity Range | 20–95 % RH (capable of steam-based humidification and condensation-controlled dehumidification) |
| Humidity Sensor | Sterilizable Capacitive RH Sensor |
| Control System | Microprocessor-Based Fuzzy Logic Controller with Dual Pt100 A-Class (4-wire) Temperature Sensors |
| Data Logging | Built-in 1024 KB Circular Memory (≈3 months @ 1-min interval) |
| Communication Interfaces | Standard RS232, Optional RS485 / Ethernet / USB |
| Software | Celsius 2005 (standard), Celsius FDA Edition (21 CFR Part 11 compliant, optional) |
| Safety Systems | Triple Independent Temperature Protection (Mechanical TB, Electronic TWW, ASF Auto-Safety Function), Audible/Visual Alarms for Over-/Under-Temperature, Over-/Under-Humidity, Door Open, Empty Water Reservoir |
| Programmability | Up to 40-step time-temperature-humidity profiles via controller or MemoryCard XL |
| Certification | Factory Calibration Certificate (60 °C center point), Optional IQ/OQ Documentation Packages (DIN 12880, DIN 12900-1), STERICard for 160 °C Sterilization Cycle (4 h) |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HPP110 |
| Instrument Type | Upright Climate Chamber |
| Internal Volume | 108 L |
| External Dimensions (W×H×D) | 710 × 760 × 620 mm (excluding handle) |
| Internal Dimensions (W×H×D) | 560 × 480 × 400 mm |
| Standard Shelving | 2 adjustable perforated stainless steel shelves |
| Temperature Range (with illumination) | 10–40 °C |
| Temperature Range (without illumination) | 0–70 °C |
| Temperature Uniformity (per DIN 12 880 | 2007-05): ≤ ±0.4 °C at 10 °C and 37 °C |
| Temperature Stability (per DIN 12 880 | 2007-05): ≤ ±0.1 °C over time |
| Humidity Range | 10–90 %RH (10–85 %RH with illumination active) |
| Humidity Control | Capacitive sensor + microprocessor-controlled humidification/dehumidification via distilled water recirculation pump and thermally blocked bacterial barrier |
| Illumination | Dual-mode tunable LED lighting — Mode 1: Cool white (5500 K), Mode 2: Mixed cool + warm white (2700 K) |
| Max irradiance | 10,000 lux at 10 cm distance |
| Temperature & Humidity Monitoring | PT100 Class A four-wire sensor (redundant fault detection), capacitive RH sensor with auto-diagnostic system |
| Safety Systems | Triple-level overtemperature protection (including Pt100-based monitoring per Protection Class 3.3), ASF (Automatic Safety Function), relay-based heater cutoff, audible/visual alarms for T/RH deviation, empty water tank, or sensor failure |
| Data Logging | Internal 1024 KB memory |
| Programming | Up to 40-stage weekly program (MEMoryCard XL compatible) |
| Connectivity | Parallel port for PCL3-compatible inkjet printers (USB via optional converter) |
| Calibration | On-device 3-point temperature / 2-point humidity calibration (20 %RH, 90 %RH) |
| Display Language Options | German, English, Spanish, French, Italian |
| Power Supply | 230 V ±10 %, 50/60 Hz |
| Max Power Consumption (heating/cooling + lighting) | 400 W |
| Net Weight | 66 kg |
| Environmental Technology | Thermoelectric (Peltier) cooling, LED illumination — zero refrigerants, low heat load, high energy efficiency |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HCP246 |
| Chamber Type | Upright |
| Internal Volume | 246 L |
| Internal Dimensions (W×H×D) | 640 × 640 × 600 mm |
| External Dimensions (W×H×D) | 790 × 938 × 750 mm |
| Construction | Electropolished Stainless Steel Interior, Galvanized Steel Exterior |
| Temperature Range (without humidity control) | 20–160 °C |
| Temperature Uniformity (per DIN 12880, at 50 °C) | ≤ ±0.3 °C |
| Temperature Stability (per DIN 12880, at 50 °C) | ≤ ±0.15 °C |
| Humidity Range | 20–95 % RH (capable of sterilization at 160 °C) |
| Humidity Sensor | Sterilizable capacitive sensor |
| Control System | Microprocessor-based dual-loop PID controller with integrated diagnostics |
| Calibration | 3-point temperature & 2-point humidity calibration via front panel |
| Data Logging | 1024 KB circular memory (≈3 months @ 1-min interval) |
| Compliance | DIN 12880, DIN 12900-1, FDA 21 CFR Part 11 (with optional Celsius FDA Edition software), GLP/GMP-ready architecture |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | CTC256 |
| Instrument Type | Upright Chamber |
| Temperature Range (with humidity control) | +10 °C to +95 °C |
| Temperature Range (dry operation) | −42 °C to +190 °C |
| Humidity Range | 10–98 %RH |
| Temperature Uniformity | ±0.5 K to ±2 K |
| Temperature Stability | ±0.5 °C |
| Internal Volume | 256 L |
| Internal Dimensions (W×H×D) | 640 × 670 × 597 mm |
| External Dimensions (W×H×D) | 898 × 1730 × 1100 mm |
| Power Supply | 400 V, 3-phase, 50 Hz |
| Rated Power | ~7,000 W |
| Net Weight | ~362 kg |
| Compliance Certificates | Factory Calibration at −20 °C to +160 °C |
Show next