- All
- Favorite
- Popular
- Most rated
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PONSEL |
| Price Range | USD 140–7,200 (FOB) |
| Detection Principle | Conductive Liquid-Level Sensing |
| Output Type | Non-polarized Dry Contact (SPST) |
| Detection Threshold | 0.5 mm water film |
| Detector Housing Material | PVC with Stainless Steel Electrodes |
| Electronics Enclosure Material | PVC |
| IP Rating | IP68 (Detector & Electronics Box) |
| Operating Temperature | 0–50 °C |
| Detector Dimensions (H×W×D) | 20 × 80 × 60.5 mm |
| Electronics Box Dimensions (H×D) | 120 × 40 mm |
| Detector-to-Box Cable Length | 9 m (fixed, shielded multi-strand polyurethane-sheathed cable) |
| Output Cables | Two 1 m polyurethane-sheathed leads with bare tinned-copper terminations |
| Power Supply | Internal Li-MnO₂ battery (3.6 V, 3-year typical service life) or external +3.6 V ±5% (SPN mode, <200 µA quiescent current) |
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Model | C4E |
| Conductivity Range | 0–200.0 mS/cm |
| Resolution | 0.01–1 (scale-dependent) |
| Accuracy | ±1% of full scale |
| Salinity Range | 5–60 g/kg |
| TDS (KCl) | 0–133,000 ppm |
| Response Time | <5 s |
| Operating Temperature | 0–50 °C |
| Temperature Compensation | NTC |
| Output Interface | Modbus RS-485 (SDI-12 optional) |
| Update Interval | <1 s |
| Supply Voltage | 5–12 V DC |
| Standby Current | 25 µA |
| Measurement Current (RS-485) | 6.3 mA @ 1 Hz |
| Pulse Current | 500 mA |
| Dimensions | Ø27 mm × 219 mm (total length) |
| Weight | 300 g (sensor + 3 m cable) |
| Housing Materials | PVC, Delrin®, stainless steel |
| Max Pressure Rating | 5 bar |
| Protection Rating | IP68 |
| Connector | 9-pin armored connector with polyurethane jacket or waterproof Fisher-type |
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Model | PHEHT |
| Measurement Principle | Composite Glass Electrode (pH) / Platinum Redox Electrode (ORP) with Ag/AgCl Reference |
| pH Range | 0–14 |
| pH Resolution | 0.01 |
| pH Accuracy | ±0.1 |
| ORP Range | −1000 to +1000 mV |
| ORP Resolution | 0.1 mV |
| ORP Accuracy | ±2 mV |
| Temperature Range | 0.00–50.00 °C |
| Temp Resolution | 0.01 °C |
| Temp Accuracy | ±0.5 °C |
| Response Time | <5 s |
| Output Interface | Modbus RTU over RS-485 / SDI-12 (selectable) |
| Power Supply | 5–12 V DC |
| Standby Current | 25 µA |
| Active Current (RS-485, 1 Hz) | 3.9 mA |
| Active Current (SDI-12, 1 Hz) | 6.8 mA |
| Peak Pulse Current | 500 mA |
| Housing Material | PVC, Delrin®, specialty pH glass, platinum, polyamide |
| Cable | Armored coaxial polyurethane cable (3 m standard), optional Fisher connector |
| Pressure Rating | 5 bar |
| IP Rating | IP68 |
| Dimensions | Ø27 mm (body) / Ø21 mm (tip), L = 207 mm |
| Weight | 350 g (sensor + 3 m cable) |
| Internal Memory | Calibration history and sensor metadata storage |
| Compliance | Designed for ASTM D1293, ISO 10523, ISO 5814, USP <791>, and GLP/GMP-aligned data integrity workflows |
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Model | EHAN |
| Measurement Principle | Composite Electrode (Pt Working Electrode / Ag/AgCl Reference Electrode with Colloidal KCl Electrolyte) |
| ORP Range | −1000.0 to +1000.0 mV |
| ORP Resolution | ±0.1 mV |
| ORP Accuracy | ±10 mV |
| Temperature Sensing | NTC Thermistor |
| Temp. Range | 0.00–50.00 °C |
| Temp. Resolution | 0.01 °C |
| Temp. Accuracy | ±0.5 °C |
| Response Time (t₉₀) | <5 s |
| Output Interface | Modbus RTU over RS-485 (standard), SDI-12 (optional) |
| Supply Voltage | 5–12 V DC |
| Quiescent Current | 25 µA |
| Active Current (1 measurement/s) | 20 mA (RS-485 or SDI-12) |
| Pulse Current (Heating Activation) | 500 mA |
| Heating Pulse Duration | 100 ms |
| Operating Pressure | ≤5 bar |
| Housing Materials | PVC, POM-C, Platinum, Polyurethane |
| Cable | 3 m armored polyurethane-sheathed cable with 9-pin connector (bare leads or waterproof Fischer-type) |
| Dimensions (installed, without gland) | 262 mm |
| (with compression gland) | 324 mm |
| Weight | 350 g (sensor + cable) |
| Brand | AQUAREAD |
|---|---|
| Origin | United Kingdom |
| Model | AP-700 & AP-800 |
| IP Rating (Sensor) | IP68 |
| IP Rating (Aquameter Display Unit) | IP67 |
| Cable Length | 3 m |
| Parameters Measured | pH, ORP, Conductivity, Dissolved Oxygen (DO), Temperature, Turbidity (AP-800 only) |
| Compliance | CE, RoHS, UKCA |
| Housing Material | Marine-grade anodized aluminum |
| Brand | Aquaread |
|---|---|
| Origin | United Kingdom |
| Model | AP-2000 |
| Measurement Parameters (Standard) | Optical Dissolved Oxygen, pH, ORP, Electrical Conductivity (EC), Temperature |
| Optional Add-ons | One Ion-Selective Electrode (e.g., NH₄⁺, NH₃-N, Cl⁻, F⁻, NO₃⁻, Ca²⁺) + One Optical Sensor (e.g., Chlorophyll-a, Phycocyanin, Turbidity, Hydrocarbon/Oil-in-Water) |
| Depth Measurement | Available in AP-2000-D variant with integrated pressure-based depth sensor |
| Data Logging | Onboard memory via Aquaread Logger software |
| GPS Integration | Built-in high-sensitivity GPS module with WGS84 coordinate output |
| Data Visualization | Export-compatible with Google Maps and Google Earth (KML/KMZ) |
| Compliance Context | Designed for field-deployable environmental monitoring per ISO 5667 (water sampling), ASTM D3370 (field measurement practices), and EPA Method 160.1 (pH/EC/DO field protocols) |
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | STAC Online Water Quality Early-Warning System |
| Pricing | Available Upon Request |
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Model | CTZN |
| Measurement Principle | Inductive (Toroidal) Conductivity |
| Temperature Compensation | Integrated NTC |
| Conductivity Range | 0.0–100.0 mS/cm |
| Resolution | 0.1 mS/cm |
| Salinity Range | 0–60 g/kg |
| Temperature Range | 0–50 °C |
| Temp. Accuracy | ±0.5 °C (0–40 °C) |
| Response Time (90%) | <30 s |
| Output Interface | Modbus RTU over RS-485 (standard), SDI-12 optional |
| Supply Voltage | 5–28 VDC (max 30 V) |
| Power Consumption | <50 µA (sleep), 11.5–31 mA (active, depending on supply) |
| Max Pulse Current | 700 mA (150 ms), 350 mA (2 ms) |
| Dimensions | Ø62.4 × 196 mm |
| Weight | 700 g |
| Housing Materials | EPDM, PVC, stainless steel (316L) |
| Pressure Rating | 5 bar |
| Ingress Protection | IP68 |
| Cable Termination | 9-pin armored connector with polyurethane jacket or waterproof Fisher connector |
Show next