- All
- Favorite
- Popular
- Most rated
| Brand | EcoChem |
|---|---|
| Origin | USA |
| Model | PAS2000 STD |
| Instrument Type | Aerosol Detector |
| Detection Principle | UV Photoionization of Particle-Bound Polycyclic Aromatic Hydrocarbons (PAHs) |
| Measurement Range | 0–100 µg/m³ (PAH), 0–100 µg/m³ (Elemental Carbon), 0–100 pA (Ion Current) |
| Detection Limit | 3 ng total adsorbed PAH |
| Sensitivity | 0.3–1 µg/m³ PAH per pA |
| Response Time | <10 s (adjustable) |
| Flow Rate | 2 LPM |
| Operating Temperature | 5–40 °C |
| Data Storage | 8,000 points (timestamped) |
| Display | 2×16-character LED |
| Output Interfaces | RS-232, 0–10 V, 0–20 mA, or 4–20 mA |
| Dimensions | 68 × 175 × 124 mm |
| Weight | 9 kg |
| Power Supply | 220 V AC / 50 Hz |
| Optional Heated Sampling Probe | 5–300 °C |
| Dilution Ratios | 0.05, 0.1, 0.2 (with mass flow controller and critical orifice) |
| Brand | Plair |
|---|---|
| Origin | Switzerland |
| Model | Rapid-E+ |
| Instrument Type | Bioaerosol Detector |
| Particle Size Range | 0.3–100 µm |
| UV Laser Wavelength | 337 nm |
| Scatter Laser Wavelength | 445 nm |
| Imaging Laser Wavelength | 635 nm |
| Scatter Pixel Configuration | 14+14 (non-polarized + parallel-polarized) |
| Fluorescence Spectral Range | 350–540 nm (12 nm/pixel) |
| Fluorescence Lifetime Channels | 373–387 nm, 412–438 nm, 459–481 nm |
| Fluorescence Decay Resolution | 1 ns |
| Imaging Pixel Configuration | 16 (5 parallel-polarized, 5 perpendicular-polarized, 6 non-polarized) |
| Sampling Flow Rate | 5 L/min |
| Max. Counting Rate | 1,000,000 particles/min (size & count) |
| Power Supply | 90–240 VAC |
| Power Consumption | <200 W |
| Dimensions | 40 × 34 × 73 cm |
| Operating Temperature | −10 to +45 °C |
| Relative Humidity | 0–95 % RH (non-condensing) |
| Weight | 25 kg |
| Brand | EcoChem |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DC-2200CE |
| Instrument Type | Aerosol Detector |
| Power Supply | 15 V Rechargeable Li-ion Battery |
| Display | 2-line × 16-character LED |
| Weight | 1.5 kg |
| Dimensions | 68 mm × 175 mm × 124 mm |
| Operating Temperature | 5–40 °C |
| Storage Capacity | 8,000 data points (timestamp + surface area value) |
| Flow Rate | 1 LPM |
| Measurement Range | 0–1000 µm²/cm³ |
| Detection Limit | 0–10 µm²/cm³ |
| Sensitivity | 0–10 µm²/cm³ |
| Response Time | <10 s (adjustable) |
| Data Output | RS232 |
| Software Compatibility | PC-based charting utility with Excel export |
| Brand | Tisch |
|---|---|
| Origin | USA |
| Model | TE-6070 |
| Flow Rate | 40 CFM (1.13 m³/min) |
| Cut-Point | PM₁₀ (≤10 µm aerodynamic diameter) |
| Filter Format | 8" × 10" (203 mm × 254 mm) |
| Flow Control Options | VFC (TE-10557) or MFC (TE-300-310) |
| Blower Motor | 1 HP, 2-pole vacuum motor |
| Timer | 7-day mechanical timer (TE-5007) or digital timer (TE-302) |
| Pressure Monitoring | 30-inch water manometer (TE-6001) |
| Data Recording | Continuous flow/pressure recorder (TE-5009) |
| Compliance | EPA Reference Method RFPS-0202-141, 40 CFR Part 50 Appendix L |
| Brand | GRIMM |
|---|---|
| Origin | Germany |
| Model | EDM365 |
| Measurement Principle | Optical (90° Laser Scattering) |
| Sampling Flow Rate | 1.2 L/min |
| Particle Size Range | 0.25–32 µm |
| Number Concentration Range | 1–3,000,000 particles/L |
| Size Channels | 31 |
| Mass Concentration Range | 0.1–6,000 µg/m³ |
| Operating Temperature | −25 °C to +50 °C |
| Power Supply | 230 V–50 Hz / 110 V–60 Hz |
| Dimensions | 80 × 60 × 40 cm |
| Weight | 25 kg |
| Repeatability | ±3% of full scale |
| Compliance | EN 12341, EN 14907, US-EPA Reference/Equivalent Method Designation, GOST R |
| Brand | GRIMM |
|---|---|
| Origin | Germany |
| Model | DMA |
| Instrument Type | Aerosol Detector |
| Particle Size Range (L-DMA) | 5–350 nm (3.0 L/min sheath flow) / 10–1100 nm (20 L/min sheath flow) |
| Sheath Gas Flow | 3.0 L/min (standard), up to 150 L/min (high-flow variant) |
| Sample Flow | 0.3 L/min |
| High-Voltage Output | +5 to +10,000 V (positive inner electrode), negative polarity optional |
| Resolution | Up to 256 size channels |
| Operating Temperature | 10–35 °C |
| Relative Humidity | 0–95% RH (non-condensing) |
| Power Supply | 85–264 VAC |
| Communication | RS-232 (9-pin D-sub), ASCII protocol, 4 MB PCMCIA SRAM |
| Working Fluid | Reagent-grade 1-Butanol |
| Safety | Automatic HV shutdown upon housing opening |
| Compliance | Designed for ISO 27498, ASTM D6243, and EU PM2.5/PM10 monitoring frameworks |
| Brand | Burkard |
|---|---|
| Origin | United Kingdom |
| Model | HIRST |
| Sampling Principle | Single-Stage Slit Impaction |
| Flow Rate | 10 L/min (0.35 CFM) |
| Sampling Area | 0.89 m² (radius 53 cm) |
| Sampling Duration | 7 days (or configurable for 24 h) |
| Cut-Off Diameter (D₅₀) | 5.2 µm |
| Drum Linear Speed | 2 mm/h |
| Drive Mechanism | Precision 7-Jewel Clockwork Movement |
| Slit Aperture | 2 mm × 14 mm |
| Tape | Melinex® Transparent Polyester Adhesive Tape (Grade 200) |
| Power Supply | 220–240 V, 50 Hz or 110 V, 60 Hz |
| Optional Battery Operation | 12 V DC |
| Net Weight | 16 kg |
| Gross Weight | 30 kg |
| Packaging Dimensions | 57 × 65 × 65 cm |
| Brand | IMR |
|---|---|
| Origin | USA |
| Model | IMR5000 |
| Instrument Type | Flue Gas CEMS |
| Measurement Accuracy | <2% FS |
| Repeatability | <2% FS |
| Stability | <2% FS |
| Response Time | Real-time |
| Measured Parameters | O₂, NO, NO₂, CO, SO₂, HC, CH₄, H₂S, HCl, NH₃, N₂O, O₃, PM |
| Sensor Technologies | Electrochemical (O₂, NO, NO₂, CO, SO₂, H₂S, NH₃, HCl, N₂O, O₃), NDIR (CH₄, CO₂*), Catalytic Bead (HC), Optional Paramagnetic (O₂), Thermal Conductivity (H₂), Optical Scattering (PM) |
| Brand | Tisch |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | DS2.5 |
| Typical Configuration | PM2.5 Sampling System |
| Pump Type | Pulse-Driven Diaphragm Pump |
| Rated Lifespan | 10,000 hours continuous operation |
| Flow Rate Range | 0–6 L/min (adjustable) |
| Default Operating Flow | 5 L/min |
| Timer Function | 7-day programmable scheduler with 24-hour real-time clock |
| Power Supply | AC/DC input + sealed rechargeable battery (12 Ah) |
| Battery Runtime | ≥12 hours at 5 L/min |
| Low-Battery Protection | automatic shutdown with visual alert |
| Low-Flow Alert | automatic shutdown with visual alert |
| Flow Control | precision electronic mass flow regulation |
| Filter Holder | standard 47 mm membrane filter cassette |
| Inlet Cut-Point | 10 µm (PM₁₀) with optional PM₂.₅ cyclone or impactor |
| Enclosure Rating | NEMA 4X (weatherproof, dust-tight, corrosion-resistant) |
| Weight | 6.8 kg (15 lbs) including battery |
| Dimensions | 24.1 × 20.3 × 27.9 cm (H×W×D) |
| Brand | EDC |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HIM-6000 |
| Pricing | Available Upon Request |
| Measured Parameters | TSP, PM-10, PM-2.5, PM-1.0, PM-4.0 |
| Optional Sensors | NO₂, SO₂, O₃, CO, CO₂, O₂, Hydrocarbons, UV/IR Radiation, Barometric Pressure (hPa), Noise (dB(A)), ELF Magnetic Field (µT), Rainfall (mm), Biochemical Agent Detectors |
| Brand | EDC |
|---|---|
| Origin | USA |
| Model | HD-1100 |
| Measurement Range | 0.01–20 / 200 mg/m³ |
| Resolution | 0.01 mg/m³ |
| Accuracy | ±10% |
| Relative Error | ±10% |
| Display | 3.5" LCD |
| Units | mg/m³ |
| Calibration Standard | NIOSH Method 0600 |
| Particle Size Range | 0.01–50 µm |
| Power Supply | 6 VDC NiMH Rechargeable Battery |
| Operating Time | >8 hours |
| Charging Time | 10–12 hours |
| Output Signal | 0–2 V analog |
| Max Operating Humidity | 95% non-condensing |
| Dimensions | 22.9 × 7.6 × 3.8 cm |
| Weight | 0.91 kg |
| Brand | GRIMM |
|---|---|
| Origin | Germany |
| Model | ESS |
| Instrument Type | Aerosol Sampling and Dilution System |
| Sample Gas Max Temperature | 500 °C |
| Probe Outer Diameter | 8 mm |
| Hot Dilution Air Flow Rate | 9 L/min (per stage) |
| Cold Dilution Air Flow Rate | 9 L/min |
| Primary Dilution Ratio (SMPS+E mode, 1 L/min sample flow) | 1:10 |
| Secondary Dilution Ratio (SMPS+E mode, 1 L/min sample flow) | 1:10 |
| Total Dilution Ratio (SMPS+E mode, 1 L/min sample flow) | 1:100 |
| Primary Dilution Ratio (SMPS+E mode, 0.3 L/min sample flow) | 1:31 |
| Secondary Dilution Ratio (SMPS+E mode, 0.3 L/min sample flow) | 1:31 |
| Total Dilution Ratio (SMPS+E mode, 0.3 L/min sample flow) | 1:961 |
| Heater Max Temperature | 200 °C |
| Pressure Tolerance | ±100 mbar (vs. ambient) |
| Dilution Air Specification | Particle-free, hydrocarbon-free, dry |
| Brand | ISAP |
|---|---|
| Origin | Germany |
| Model | ISAP LCPI |
| Flow Accuracy | ±2% |
| Sampling Flow Rate | 5–60 LPM |
| Temperature Range | −50 to +310 °C |
| Cut-Point Range | 20.0 µm to 1 nm |
| Stages | Up to 11 stages (13 size fractions) or 6 stages (8 size fractions) |
| Impactor Type | PILAT/BERNER design |
| Material | Acid-resistant alloys |
| Sampling Mode | Isokinetic or constant-flow |
| Backup Filter Stage | Optional 0.001 µm (1 nm) stage |
| Collison Disk Diameter | 70 mm OD / 30 mm ID |
| Brand | GRIMM |
|---|---|
| Origin | Germany |
| Model | SMPS+E |
| Principle | Scanning Mobility Particle Sizing (SMPS) |
| Sample Flow Rate | 1–5 L/min |
| Particle Size Range | 0.8 nm – 1100 nm |
| Number Concentration Range | 1–3,000,000 particles/L |
| Size Channels | 255 |
| Particle Mass Concentration Range | up to ~10⁸ particles/cm³ |
| Sheath Flow Rate | 3–20 L/min |
| Maximum Scan Frequency | 16 Hz |
| FCE Response Time (T₉₀) | 200 ms |
| FCE Sensitivity | 0.1 fA at 1 Hz |
| FCE Noise Level | 0.35 fA (τ = 0.25 s, 90% confidence) |
| DMA Voltage Range | 5–10,000 V |
| Operating Pressure Range | 400–1100 mbar |
| Power Supply | 230 VAC / 120 VAC, 50–60 Hz or 12 VDC ±10% |
| Compliance | ISO 15900:2020 (Determination of particle size distribution by electrical mobility analysis) |
| Brand | IMR |
|---|---|
| Origin | USA |
| Model | 2800P |
| Instrument Type | Portable Flue Gas Analyzer |
| Measurement Accuracy | ±2% FS |
| Response Time | <90 s |
| Drift Stability | <5% over 1 h |
| Measured Parameters | O₂, NO, NO₂, CO, SO₂, HC/CH₄, Flue Gas Temperature (TG), Ambient Temperature (TA) |
| Sensor Technology | Electrochemical (O₂, NO, NO₂, CO, SO₂, HC/CH₄) |
| Operating Temperature Range (Probe) | Up to 1200 °C (1600 °C optional) |
| Battery Life | 6 h (rechargeable Li-ion) |
| Compliance | Certified for official emission monitoring per German TA Luft and EU Directive 2010/75/EU (IED), supports ASTM D6522, EN 15267-3, and VDI 3862 |
| Data Output | RS232, USB |
| Display | Backlit LCD showing up to 8 parameters simultaneously |
| Built-in Printer | Yes (programmable, on-site thermal printout) |
| Fuel Database | 23 preloaded fuel types + 4 user-definable |
| Calculated Parameters | λ (excess air ratio), qA (dry flue gas loss), CO₂ (by ASME PTC 4.1 equation), NOₓ (as NO₂-equivalent) |
| Brand | EDC |
|---|---|
| Origin | USA |
| Model | EPAM-5000 |
| Measurement Principle | Integrated Optical Scattering & Gravimetric Filtration |
| Safety Rating | Non-Explosive |
| Measurement Range | 0.01–200.0 mg/m³ |
| Resolution | 0.01 mg/m³ |
| Accuracy | ±0.003 mg/m³ |
| Relative Error | ±0.003 mg/m³ |
| Particle Size Range | 0.1–100 µm |
| Flow Rate | 1.0–5.0 L/min |
| Filter Diameter | 47 mm FRM-compliant |
| Alarm Output | 90 dB at 3 ft |
| Analog Output | 0–2 VDC |
| Data Logging Interval | 1 sec to 30 min |
| Memory Capacity | 21,600 data points |
| Internal Clock Backup | >5 years |
| Operating Temperature | –10 °C to +50 °C |
| Storage Temperature | –20 °C to +70 °C |
| Humidity Range | ≤95% RH non-condensing |
| Dimensions (H×W×D) | 35.6 × 15.2 × 25.4 cm |
| Weight | 5.4 kg |
| Power | Rechargeable battery (24 h runtime) or AC adapter (22 h recharge time) |
| Brand | Tisch |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Origin | Imported |
| Model | TE-423 |
| Pricing | Upon Request |
| Channels | 3 |
| Sampling Flow Rate | 1 mL/min to 2 SLPM |
| Power Supply | 118 VAC, 50/60 Hz, 3 A |
| Control Interface | Touchscreen + Front-panel LCD |
| Ozone Scrubber | Temperature-controlled with cumulative runtime timer |
| Mounting | 19-inch rack-mountable or desktop (with rubber feet) |
| Remote Channel Control | Yes |
| Controller Architecture | PLC-based with front-panel operational interface |
| Structural Design | Ruggedized for long-term field deployment and mobile operation |
| Compliance Basis | DRI Standard Method for Carbonyl Collection |
| Brand | CerexMS |
|---|---|
| Origin | USA |
| Model | Shepherd |
| Instrument Principle | Infrared Absorption Spectroscopy (FTIR) |
| Type | Portable |
| Response Time | <1 s |
| Repeatability | High for all IR-active species |
| Detection Range | Sub-ppb to % v/v |
| Gas Library | 385+ compounds (including >100 HAPs) |
| Optical Path Length | 20 m (fixed, multipass) |
| Detector | Liquid-nitrogen-free cryogenically cooled MCT |
| Data Output | Raw interferograms, calibrated spectra, concentration time-series, CSV export |
| Compliance | Designed for EPA Method 320 / ASTM D6348 / ISO 12039 alignment |
| Software | CMS Continuous Monitoring Software (Windows Embedded, touchscreen UI) |
| Connectivity | Wi-Fi, Ethernet, USB |
| Alarm Options | Visual, audible, email, remote notification |
| Calibration | Built-in reference cell + user-definable multi-point calibration |
| Maintenance | Two consumables only — IR source and thermoelectric cooler compressor |
| Brand | Protea |
|---|---|
| Origin | United Kingdom |
| Model | AtmosFIRt |
| Instrument Principle | Infrared Absorption Spectroscopy |
| Type | Portable Multicomponent Gas Analyzer |
| Response Time (T90) | 120 s (at 1 cm⁻¹ resolution) |
| Repeatability | <1% of full scale |
| Spectral Resolution | Adjustable from 0.5 cm⁻¹ to 8 cm⁻¹ (standard: 1, 2, 4, 8 cm⁻¹) |
| Spectral Range | 485–8500 cm⁻¹ |
| Detection Limits | <0.2 ppm (gas-dependent) |
| Operating Temperature | Up to 180 °C (sample cell) |
| Weight | 21 kg (configurable) |
| Power | 100–250 V AC, 50–60 Hz, 250 W typical |
| Brand | Tisch |
|---|---|
| Origin | USA |
| Model | TE-6070V-2.5-HVS |
| Flow Rate | 40 CFM (1.13 m³/min, adjustable) |
| Flow Stability | ±1% of setpoint (99% maintained under varying ambient conditions) |
| Filter Medium | 8" × 10" Micro-Quartz fiber filter (TE-QMA compatible) |
| Compliance | EPA Reference Method RFPS-0202-141, 40 CFR Part 50, Appendix B |
| Data Logging | Continuous 5-minute intervals (temperature, barometric pressure, actual flow rate) |
| Control System | Microprocessor-based with automatic MFC/VFC compensation |
| Power Supply | 110 V/60 Hz or 220 V/50 Hz, 0.6 HP dual-stage vacuum blower |
| Operating Current | 5 A (run), 12 A (inrush) |
| Timer | 7-day mechanical programmable timer (TE-5007) |
| Elapsed Time Indicator | TE-5012 |
| Flow Monitoring | TE-5009 continuous flow/pressure recorder with TE-106 chart compatibility |
| Brand | Digitel |
|---|---|
| Origin | Switzerland |
| Model | DRA-12 |
| Sampling Principle | Precipitation-Triggered Sequential Wet-Deposition Collection |
| Bottle Capacity | 32 × 250 mL PTFE-Coated Polyethylene Vials |
| Bottle Exchange | Automatic, Level-Sensing Actuated |
| Contact Materials | Fully PTFE-encapsulated Wet Path |
| Temperature Control | Integrated Heating/Cooling of Lid, Funnel, and Roof Assembly |
| Environmental Sensors | Radiation-Shielded Ambient Temperature Sensor |
| Control System | Onboard Microprocessor with Real-Time Clock & Programmable Logic |
| Interface | RS-232C, Modem, Wireless Modem Support |
| Compliance Ready | Designed for ISO 9060:2018 (Solar Radiation), ASTM D5475-21 (Atmospheric Deposition Sampling), and EU Directive 2004/107/EC (Heavy Metals in Air) |
| Brand | Bertin |
|---|---|
| Origin | France |
| Model | Coriolis® μ |
| Sampling Principle | Wetted-Wall Cyclonic Impaction |
| Flow Rate Range | 100–300 L/min |
| Flow Measurement Accuracy | ±2% |
| Sampling Duration | 1–10 min (standard) |
| Operating Temperature | 0–50 °C |
| Operating Relative Humidity | ≤95% RH |
| Cut-Off Diameter (d₅₀) | <0.5 µm |
| Biological Collection Efficiency (Staphylococcus epidermidis ATCC 14990) | 78% |
| Collection Volume | 10–15 mL (fixed at 15 mL for standard operation) |
| Battery Runtime | ~1 h (internal Li-ion) |
| Dimensions | 22 × 33 × 36 cm |
| Weight | 3.0 kg (instrument only, with battery) |
| Certifications | ISO 14698-1 validated (UK HPA), CE, UL, CEM |
| Decontamination | Hydrogen Peroxide (H₂O₂)-compatible |
| Brand | Tisch |
|---|---|
| Origin | USA |
| Model | TE-PNY1123 |
| Instrument Type | High-Flow Gas Sampler |
| Sampling Configuration | Single-Channel |
| Flow Rate Range | 120–750 L/min |
| Flow Stability | ±2% |
| Flowmeter Accuracy | ±2% |
| Continuous Operation Time at Max Flow & Backpressure | 24 h |
| Brand | Tisch |
|---|---|
| Origin | USA |
| Model | TE-20-800 |
| Sampling Flow Rate | 28.3 L/min (optional 60 L/min and 90 L/min) |
| Aerodynamic Diameter Range | >9.0 µm to <0.3 µm |
| Stage Count | 8 |
| Collection Substrate | 81 mm filter or stainless steel plates |
| Pre-separator Cut-point | ≥10.0 µm |
| Compliance | US Federal Reference Method for PM10/PM2.5, EPA/OSHA/ACGIH inhalable & thoracic fraction criteria, ISO 21501-4, ASTM D7251 |
Show next