- All
- Favorite
- Popular
- Most rated
| Brand | SEN |
|---|---|
| Origin | Japan |
| Model | PM1103C |
| Type | Benchtop UV-Ozone Surface Cleaning System |
| Wavelengths | 185 nm and 254 nm |
| Lamp Type | Low-pressure mercury vapor lamp |
| Chamber Material | Stainless steel (electropolished) |
| Standard Chamber Volume | ~11 L |
| Power Supply | AC 100–120 V / 200–240 V, 50/60 Hz |
| Safety Interlock | Door-activated cut-off |
| Compliance | CE-marked, RoHS-compliant |
| Software Interface | Manual operation with analog timer (optional digital controller available) |
| Brand | Diener |
|---|---|
| Origin | Germany |
| Model | Bell Jar 35 |
| Instrument Type | Imported Plasma Surface Treater |
| Chamber Volume | ~35 L |
| Chamber Material | Borosilicate Glass (Bell Jar: Ø315 mm × H500 mm) |
| Power Supply | 230 V / 16 A |
| RF Frequencies | 40 kHz (0–500 W), 13.56 MHz (0–300 W), DC/Unipolar Pulsed (0–300 W, up to 600 V) |
| Vacuum System | Compatible with Standard Rotary Vane or Dry Pumps (User-Specified) |
| Gas Control | Three Mass Flow Controllers (MFCs) |
| Substrate Holder | Ø140 mm (Optional Rotation, Heating, Cooling) |
| Pressure Measurement | Pirani Gauge |
| Control System | PCCE Software on Microsoft Windows XPe |
| Electrode Configuration | Switchable for Plasma Cleaning, Activation, Etching |
| Sputter Source | 2″–3″ with Shutter (Optional Exhaust Duct & Gas Inlet) |
| Additional Options | Faraday Cage, Plasma Polymerization Kit, TEM Flange, Corrosive-Gas-Compatible Design, Heated Chamber, Oxygen Generator, Slow Vent/Suction Modules, Maintenance & On-Site Installation Support |
| Brand | SEN (Japan) |
|---|---|
| Origin | Japan |
| Model Range | HL100G, HL400DL, HL1000DL, SE-1500 |
| Power Output | 100 W to 2000 W |
| Lamp Life | ≥2000 h |
| Total Length / Emission Length | 170 mm / 30 mm (HL100G) to 400 mm / 250 mm (HL2000DL-1) |
| Automation Level | Fully Automatic |
| Compliance | Designed for ISO 13485-aligned cleanroom and electronics manufacturing environments |
| Regulatory Context | Compatible with IPC-A-610, JIS C 5012, and JEDEC J-STD-020 process validation frameworks |
Show next