- All
- Favorite
- Popular
- Most rated
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | 1810C |
| Price | Upon Request |
| Input Water | Municipal tap water (high hardness), 1.0–5.0 kg/cm² pressure, 5–40 °C |
| Power Supply | 220 V / 50 Hz, 80 W |
| Ambient Operating Conditions | 5–40 °C, 10–80% RH |
| Production Rate | 10 L/h |
| Continuous Dispense Flow | 1.5 L/min |
| Type III Water Conductivity | <10 µS/cm (meets GB/T 6682–1992 Grade III & ASTM CAP/NCCLS standards) |
| Type I Water Resistivity | 18.25 MΩ·cm @ 25 °C (meets GB/T 6682–1992 Grade I & ASTM CAP/NCCLS standards) |
| TOC | <10 ppb |
| Silica Rejection | >99.9% |
| UV Absorbance (254 nm, 1 cm path) | ≤0.001 |
| Soluble Silica (as SiO₂) | <0.01 ppm |
| Particles (>0.22 µm) | <1 /mL |
| Heavy Metals (total) | <0.01 ppm |
| Cationic Impurities (Fe, Cu, Al, Ni, Zn, Cr, Na, K) | <0.001–0.02 ppb |
| Anionic Impurities (Cl⁻, NO₂⁻, NO₃⁻, SO₄²⁻) | <0.01–0.02 ppb |
| Display | 4-line color LCD |
| Housing | Matte black ABS |
| Control | Touch keypad with self-diagnostic boot sequence |
| Integrated Functions | Auto-flush timer, RO antiscalant algorithm, manual RO flush, low-water alarm, power-fail safeguard, full-tank standby mode, real-time resistivity monitoring, manual recirculation, scheduled ultrapure water recirculation |
| Purification Pathway | Tap water → Pre-filter → Water softener → Coarse filter → Fine filter → Activated carbon filter → Booster pump → RO membrane → Pure water tank → Membrane pump → Ultra-purification cartridge → Final 0.22 µm terminal filter → Type I outlet / Type III outlet |
| Accessories | 30 L polyethylene pure water storage tank |
| Documentation | User manual, installation guide, maintenance manual, warranty card |
| Service | On-site commissioning, system validation, and operator training included |
| Brand | Kyocera |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JUPT-IV Series |
| Quotation | Available Upon Request |
| Control Interface | Touch-key with LCD display |
| Safety Features | Low-water alarm, power-failure protection |
| RO System | Integrated anti-scaling program + manual RO membrane flush button |
| Control Core | IC-based microcomputer controller |
| Monitoring | Real-time online water quality monitoring |
| Dual-Outlet Design | Grade III purified water + Grade I ultrapure water |
| Auto-Stop | Full-tank shutdown |
| Auto-Start | Activated by inlet supply or user demand |
| UV Sterilization | Dual-wavelength (185 nm + 254 nm) UV lamp with TOC reduction capability |
| Final Filtration | 0.45 µm / 0.22 µm pre-filtered high-flux terminal filter |
| Pre-desalination | Two-stage pre-desalting system (optional for high-TDS feedwater) |
| Scalability | Upgradable for enhanced water quality and flow capacity |
| Feed Water | Municipal tap water, pressure 0.1–0.5 MPa |
| RO Production Rate | 5–20 L/h |
| Continuous Dispensing Flow | 1.5 L/min |
| Grade III Water Conductivity | 2–10 µS/cm (meets GB/T 6682–1992 Class III & ASTM CAP/NCCLS standards) |
| Grade I Ultrапure Water Resistivity | ≥18.20 MΩ·cm @ 25 °C (meets GB/T 6682–1992 Class I & ASTM CAP/NCCLS standards) |
| Silica Rejection Rate | >99.9% |
| Absorbance (254 nm, 1 cm path) | ≤0.01 |
| Soluble Silica [as SiO₂] | <0.01 ppm |
| Particles (>0.22 µm) | <1/mL |
| Power Supply | 220 V AC, 50 Hz |
| Operating Environment | 5–40 °C |
| Optional Accessories | Sediment pre-filter, water softener (for hardness >200 mg/L as CaCO₃), desalinator (for TDS >400 ppm) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Molelement 1810v |
| Pricing | Available Upon Request |
| Feed Water | Distilled or RO Water (5–40 °C) |
| Continuous Flow Rate | 1.5 L/min |
| Production Rate | 10 L/h |
| Resistivity | 18.25 MΩ·cm @ 25 °C |
| TOC | <10 ppb |
| Silica Rejection | >99.9% |
| UV Absorbance (254 nm, 1 cm) | ≤0.001 |
| Particles (>0.22 µm) | <1 /mL |
| Heavy Metals | <0.01 ppm (max) |
| Cation Limits (ppb) | Fe <2, Cu <2, Al <3, Ni <1, Zn <5, Cr <1, Na <20, K <20 |
| Anion Limits (ppb) | Cl⁻ <10, NO₂⁻ <20, NO₃⁻ <20, SO₄²⁻ <10 |
| Compliant With | GB/T 6682–1992 Grade I, ASTM D1193–2020 Type I, NCCLS/CLSI EP21-A |
Show next