- All
- Favorite
- Popular
- Most rated
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MP-2 |
| Motion Range (Coarse) | X 60 mm, Z 50 mm |
| Motion Range (Fine) | X 4 mm, Z 4 mm, Y 40 mm |
| Fine Adjustment Resolution | 10 µm per click (X/Z/Y) |
| Coarse Knob Travel per Full Rotation | X/Z 250 µm, Y 500 µm |
| Pivot & Tilt Functionality | Integrated |
| Electrode Holder Included | H-1 |
| Dimensions (W×D×H) | 150 × 130 × 210 mm |
| Weight | 4.8 kg |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | PC-100 |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Power Consumption | ~70 W |
| Heating Element | Kanthal wire, max. 2.5 V |
| Pulling Force | ≈25 g × 2 (light) or ≈100 g × 2 (heavy) |
| Dimensions | 205 × 190 × 185 mm (W × D × H) |
| Weight | 3.45 kg |
| Tip Diameter Range | down to 1 µm |
| Capillary Compatibility | φ1 mm × 90 mm glass capillaries |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UM-1F, UM-1FC |
| Fine Adjustment Range (UM-1F) | 20 mm (X-axis), 250 µm per revolution |
| Coarse + Fine Adjustment Range (UM-1FC) | 14 mm coarse + 6 mm fine (X-axis), 250 µm per revolution |
| Dimensions (UM-1F) | 58 mm (W) × 23 mm (D) × 60 mm (H) |
| Weight | 78 g |
| Dimensions (UM-1FC) | 80 mm (W) × 23 mm (D) × 60 mm (H) |
| Weight | 92 g |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MO-10 |
| Actuation Principle | Oil-hydraulic displacement amplification |
| Control Mechanism | Drum-type rotary actuator |
| Total Travel Range | 10 mm |
| Fine Adjustment per Full Knob Rotation | 500 µm |
| Minimum Graduation | 2 µm |
| Hydraulic Tubing Length | 1.5 m |
| Control Unit Dimensions (W×D×H) | 65 × 88 × 93 mm |
| Control Unit Weight | 630 g |
| Drive Unit Dimensions (W×D×H) | 30 × 20 × 125 mm |
| Drive Unit Weight | 50 g |
| Mounting Compatibility | Standard 3-axis manual micromanipulator rails (e.g., Narishige MMO-2, MN-4, or equivalent) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | U-12C |
| Mounting Compatibility | 6 mm diameter support rod (e.g., URC-1 stand) |
| Adjustment Mechanism | Coarse X-axis translation (14 mm), pivot-and-tilt fine positioning |
| Dimensions (W×D×H) | 40 × 30 × 42 mm |
| Weight | 47 g |
| Material | Precision-machined stainless steel and brass components |
| Drive Type | Manual mechanical adjustment via knurled knobs and friction-based locking |
| Compliance | Designed for laboratory-grade micro-positioning in electrochemical and electrophysiological setups |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MHW-3 |
| Drive Mechanism | Water-Hydraulic |
| Motion Resolution (Fine) | 0.2 µm (min. scale) |
| Coarse Travel Range (X/Y/Z) | 30 mm each |
| Fine Travel per Full Knob Rotation | 50 µm |
| Coarse Travel per Full Knob Rotation | ~4 mm |
| Control Unit Dimensions | 115 × 115 × 132 mm, 1.6 kg |
| Drive Unit Dimensions | 155 × 155 × 100 mm, 900 g |
| Hydraulic Tubing Length | 900 mm |
| Joint Type | Spherical Ball Joint (B-9 Standard) |
| Electrode Holder | H-12 Type |
| Included Accessories | Hex Key Wrench, Dual Adapter, Isolation Mounting Platform |
| Brand | Sutter |
|---|---|
| Origin | USA |
| Model | BV-10 |
| Instrument Type | Microelectrode Processing System for Electrophysiology |
| Heating Elements | Pt/Ir wire and Sn-Pb alloy wire |
| Tip Diameter Capability | < 0.3 µm |
| Control | Triple independent digital controllers for heat, pull force, and timing |
| Microscopy | Integrated dual-magnification optical system (low- and high-power objectives) |
| Compliance | Designed for GLP-compliant electrophysiology lab workflows |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | M-3333 |
| Dimensions (W×D×H) | 126 × 43 × 145 mm |
| Weight | 340 g |
| Coarse Motion Range (X/Y/Z) | 40 / 12 / 30 mm |
| Fine Motion Range (X) | 7 mm |
| Minimum Step Size | 10 µm |
| Maximum Step Size | 250 µm |
| Compatible Electrode Holder | H-1 |
| Drive Mechanism | X-4 Rotational X-Block |
| Construction | Compact, Low-Profile Monoblock Design |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UM-1PF, UM-1PFC |
| Fine Adjustment Range (UM-1PF) | 20 mm (X-axis) |
| Fine Adjustment Range (UM-1PFC) | 6 mm (X-axis) |
| Coarse Adjustment Range (UM-1PFC) | 14 mm (X-axis) |
| Micrometer Resolution | 250 µm |
| Dimensions (W×D×H) | 85 × 23 × 53 mm |
| Weight | 102 g (UM-1PF), 106 g (UM-1PFC) |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | M-44 |
| Mounting Interface | Ø4 mm rod |
| Gross Adjustment Range | 22 mm |
| Pivot Motion Axis | Y-axis |
| Tilt Motion Axis | Z-axis |
| Dimensions (W×D×H) | 65 × 25 × 50 mm |
| Weight | 70 g |
| Standard Accessories | H-7C Pipette Holder, Allen Wrench |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UM-3C, UMM-3C |
| Gross Movement Range (UM-3C) | X±10 mm, Y±10 mm, Z±10 mm |
| Gross Movement Range (UMM-3C) | X±15 mm, Y±15 mm, Z±15 mm |
| Rotation | Manual 360° continuous |
| Mounting Shaft Diameter (UM-3C) | 10 mm |
| Mounting Shaft Diameter (UMM-3C) | 12 mm |
| Compatible Magnetic Stands | GJ-1 (UM-3C), GJ-8 (UMM-3C) |
| Dimensions (UM-3C) | 120 × 60 × 95 mm |
| Weight (UM-3C) | 235 g |
| Dimensions (UMM-3C) | 145 × 75 × 130 mm |
| Weight (UMM-3C) | 475 g |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | U-3C |
| Mounting Options | Ø6 mm rod (URC-1) or M3 screw |
| Travel Range (Coarse) | X: 14 mm, Y: 14 mm, Z: 14 mm |
| Dimensions (W×D×H) | 52 × 35 × 64 mm |
| Weight | 74 g |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UN-3C |
| Travel Range (X/Y/Z) | 14 mm each |
| Dimensions (W×D×H) | 48 × 18 × 60 mm |
| Weight | 84 g |
| Mounting Options | Ø6 mm vertical rod (e.g., URC-1) or M3 threaded hole |
| Type | Manual coarse-positioning micromanipulator for electrochemical and microscale experimental setups |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UMM-3FC |
| Mounting Rod Diameter | 12 mm |
| Travel Range (Coarse) | X/Y/Z ±24 mm |
| Travel Range (Fine) | X/Y/Z ±6 mm |
| Fine Adjustment per Full Knob Rotation | 250 µm |
| Integrated Rotation Mechanism | Yes |
| Dimensions (W×D×H) | 143 × 92 × 158 mm |
| Weight | 510 g |
| Compatible Magnetic Base | GJ-8 (sold separately) |
| Brand | Sutter |
|---|---|
| Origin | USA |
| Model | P-30 |
| Heating Element Options | Platinum-Iridium or Nichrome Coil |
| Control Interface | Three Digital Knobs (Heat, Pull, Velocity) |
| Precision Mechanism | Micrometer-Based Pull Length Reproducibility |
| Electrode Tip Diameter | Down to <0.3 µm |
| Power Supply | Constant-Current Source for Heater and Pull Solenoid |
| Dual-Step Heating Mode | Yes |
| RFI Filtering | Integrated |
| Mounting Base | Rubber-Pad Clamping System |
| Construction Materials | Corrosion-Resistant Alloys and Ceramics |
| Voltage/Frequency Options | Dual (115 V / 230 V |
| Application Domain | Intracellular Electrophysiology, Patch-Clamp Recording, Microinjection, Single-Cell Manipulation |
| Brand | Sutter |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | XenWorks |
| Pricing | Upon Request |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MMO-220A |
| Drive Principle | Oil-Hydraulic |
| Axis Configuration | Single-Axis (Z-axis fine adjustment) |
| Fine Adjustment Range | 10 mm |
| Minimum Step Resolution | 1 µm |
| Coarse Rotation per Full Turn | 250 µm |
| Control Unit Dimensions (W×D×H) | 65 × 88 × 93 mm, 630 g |
| Actuator Unit Dimensions (W×D×H) | 52 × 20 × 35 mm, 38 g |
| Hydraulic Tubing Length | 0.9 m |
| Compatibility | Mounts to standard 3-axis micromanipulators (e.g., MO-202, MN-4, or equivalent ball-joint platforms) |
| Operating Principle | Continuous hydrostatic pressure transmission via incompressible silicone oil |
| Brand | Sutter Instrument |
|---|---|
| Origin | USA |
| Product Line | Capillary Glass & Filaments |
| Wall Type Options | Standard Wall, Thin Wall, Multibarrel, Quartz |
| Material | Borosilicate Glass (e.g., 7052, 7740) and Fused Quartz |
| Outer Diameter Range | 1.00–2.00 mm |
| Inner Diameter Range | 0.30–1.56 mm |
| Length Options | 7.5 cm, 10 cm, 15 cm |
| Packaging Quantities | 75–250 units per pack |
| Filament Availability | With or Without Internal Filament |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model Variants | MTK-1-O1/O2/O3/N1/N2/N3/N4/Z1/Z2/L1/L2 |
| Drive Principle | Hydraulic |
| Axes | X, Y, Z, Rotation (θ) |
| X/Y/Z Travel (Hydraulic Fine Control) | 10 mm |
| X/Y/Z Step Resolution (Fine Button) | 250 µm (X/Y), 1000 µm (Z) |
| Minimum Increment (Fine Adjustment) | 5 µm (X/Y), 20 µm (Z) |
| Coarse Return Stroke (Manual Reset) | 50 mm |
| Pipette Tip Angular Range | 15°–40° |
| Pipette Tip-to-Anchoring Point Distance | Adjustable & Reproducible |
| Hydraulic Tubing Length | 0.6 m |
| Control Unit Dimensions (W×D×H) | 85.6 × 225–235 × 151–171 mm, ~1.9 kg |
| Driver Unit Dimensions (W×D×H) | 108–138 × 145–155 × 100–150 mm, ~820 g |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MM-3 |
| Gross Weight | 790 g |
| Dimensions (W×D×H) | 105 × 70 × 145 mm |
| Coarse Movement Range (X/Y/Z) | 30 / 20 / 35 mm |
| Fine Movement Range (X-axis only) | 7 mm |
| Fine Adjustment Resolution | 10 µm per click (250 µm per full rotation) |
| Electrode Holder | Compatible with H-1 holder and standard 1.2–1.5 mm diameter electrode shafts |
| Ergonomic Design | Dual-handled X/Z control, rack-and-pinion coarse drive, gravity-compensated tension adjustment |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | BE-8 |
| Travel Range (Coarse X-axis) | 40 mm |
| Mounting Interface | 10 mm diameter rod |
| Dimensions (W×D×H) | 140 × 25 × 95 mm |
| Weight | 210 g |
| Type | Single-Axis Coarse Micromanipulator |
| Application | Stereotactic Auxiliary Positioning |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | NMN-21 |
| Minimum Adjustment Resolution | 1 µm |
| Coarse Travel (X/Y/Z) | 15 mm each axis |
| Fine Travel (X/Y/Z) | 6 mm each axis (via full-turn knob), 250 µm per full turn |
| Dimensions (W×D×H) | 110 × 170 × 105 mm |
| Weight | 930 g |
| Mounting Compatibility | UST-2 solid universal joint, GJ-12 magnetic base, AP-13-3 clamp holder, H-13 electric joystick, MHW-4-1 hydraulic manipulator interface |
| Accessories Included | UST-2 universal joint, mounting platform, H-13 electric joystick, hex wrench |
| Brand | Sutter |
|---|---|
| Origin | USA |
| Product Type | Replacement Filament Heating Elements |
| Compatible Models | P-1000, P-97, P-87, P80PC, P80C, PC-84, P-77B, P-30, P-2000, P-77A |
| Filament Types | Box (square), Trough (rectangular), Loop, Custom Pt/Ir, Nichrome |
| Dimensions Range | 1.5–4.5 mm width |
| Material Options | Kanthal A1, Nichrome, Platinum/Iridium alloy |
| Packaging | Minimum order quantity = 4 filaments |
| Brand | Sutter |
|---|---|
| Origin | USA |
| Model | MP85 / MP285 / MP-33 |
| Type | Electrochemical Sample Manipulator |
| Axes | 3–4 axis (manual or motorized) |
| Positioning Resolution | Down to 62.5 nm (MP-285/MP-225), 0.2 µm (MP-85 ultra-fine), 0.01 mm (MP-33 fine), 0.1 mm (coarse) |
| Drift | <10 nm/h (MP-285, 24°C), <1 µm/h (MPC-325-2/MPC-385-2) |
| Travel Range | Up to 25 mm (X/Y/Z/oblique), 1 inch (MP-285), 37 × 20 × 20 mm (MP-33 coarse) |
| Control Interface | RS-232 serial, software-driven (XenoWorks™ compatible) |
| Compliance | Designed for GLP/GMP-aligned electrophysiology and electrochemical microelectrode positioning |
Show next