- All
- Favorite
- Popular
- Most rated
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | SGM1040-VNIR |
| Price Range | USD 70,000 – 112,000 |
| Wavelength Range | 350–1020 nm |
| Slit Width | 25 µm |
| Optical Resolution (FWHM) | 1.3 nm |
| Detector | Sony ILX554B linear CCD, 2048 pixels |
| Integration Time | 1 ms – 65 s |
| Dynamic Range | 1800:1 |
| Signal-to-Noise Ratio | 200:1 |
| Wavelength Repeatability | ±0.05 nm (100 consecutive measurements, Hg-Ar lamp) |
| Wavelength Accuracy | ±0.3 nm |
| Thermal Drift | <0.04 nm/°C |
| Data Interface | USB 2.0 @ 480 Mbps |
| Fiber Connector | SMA 905 |
| Dimensions | 86 × 110 × 31.4 mm |
| Key | Brand: ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model Series | Omni-λ Grating Modules |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Model | DPe22 |
| Detector Type | Room-Temperature Pyroelectric Detector |
| Spectral Range | 500 nm – 22 µm |
| Active Area | 0.5 mm × 2 mm |
| Window Material | ZnSe (standard) |
| Responsivity @ 500 Hz, 12.5 µm | 2×10⁵ V/W |
| Specific Detectivity D* @ 500 Hz, 12.5 µm | 1×10⁹ cm·Hz¹ᐟ²/W |
| NEP @ 500 Hz, 12.5 µm | 9×10⁻¹¹ W/Hz¹ᐟ² |
| Max. Incident Power | 1 µW |
| Max. Output Voltage | 4 V |
| Output Mode | Voltage |
| Polarity | Positive (P) |
| Recommended Modulation Frequency | ~70 Hz |
| Pre-amplifier Integrated | Yes |
| Sensing Element | LATGS Crystal |
| Structural Design | Thermocouple-inspired architecture |
| Origin | Israel |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | PD10 |
| Pricing | Available Upon Request |
| Measurement Principle | Photodiode-based Pulse Energy Detection |
| Max Repetition Rate | 10 kHz |
| Energy Range | 2 nJ – 20 µJ |
| Spectral Range | 190–1100 nm |
| Active Area | Ø10 mm |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (PRC) |
| Model | CCD Interface Flange |
| Pricing | Available Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer | ZOLIX Optics Co., Ltd. |
| Product Type | Spectroscopy Instrument Control Software |
| Model | SpectraScan (Accessory Software Suite) |
| Compliance | Designed for ZOLIX omni-λ Series Monochromators & ZOLIX CCD Detectors |
| Interface | USB 2.0 / USB 3.0 |
| Supported Operating Systems | Windows 10/11 (64-bit) |
| Data Export Formats | CSV, TXT, ASCII, PNG, TIFF |
| Calibration Support | Wavelength & Intensity Calibration via NIST-traceable standards |
| Software Architecture | Native C++ with multi-threaded acquisition engine |
| Audit Trail | Optional GLP-compliant logging module (configurable) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | K5P10-1-J2 |
| Pricing | Upon Request |
| Origin | Israel |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Models | Nova II, Vega, Nova, Orion, LaserStar Single-Channel |
| Pricing | Available Upon Request |
| Brand | ZOLIX |
|---|---|
| Model | DMCT12-De01 |
| Detector Type | Liquid-nitrogen-cooled HgCdTe photovoltaic detector |
| Spectral Range | 2–12 µm |
| Active Area | 1 × 1 mm² |
| Peak Responsivity | 3 × 10³ V/W @ λₚₑₐₖ |
| Response Time | <25 ns |
| Detectivity (D*) | ≥3 × 10¹⁰ cm·Hz¹ᐟ²/W |
| Output Polarity | Positive (P) |
| Output Mode | Voltage |
| Cooling Requirement | Liquid nitrogen (LN₂), user-supplied |
| Housing | DEC-12 dewar assembly for spectrometer slit coupling |
| Amplification | External preamplifier required (e.g., ZPA-101 or ZPA-300) |
| Compliance | Designed for integration with FTIR, dispersive IR spectrometers, and time-resolved IR systems operating under GLP/GMP-aligned laboratory conditions |
| Brand | ZOLIX |
|---|---|
| Model | BFC Series |
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Pricing | Available Upon Request |
| Brand | ZOLIX |
|---|---|
| Model | DPe Series |
| Type | Room-Temperature Pyroelectric Detector |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (Producer) |
| Spectral Range | 2–16 µm (DPe16) / 2–22 µm (DPe22) |
| Active Area | 1.65 × 1.65 mm² |
| Photosensitive Diameter | 3.7 mm |
| Window Material Options | A4 (for DPe16), A3 (for DPe22) |
| Responsivity | 2.75 × 10⁵ V/W (typ., 10 Hz, 500 K blackbody) |
| Detectivity (D*) | 4.32 × 10⁸ cm·Hz¹ᐟ²/W (typ., 10 Hz, 1 Hz bandwidth) |
| NEP | 3.82 × 10⁻¹⁰ W/Hz¹ᐟ² (typ.) |
| Feedback Resistance | 10 GΩ |
| Feedback Capacitance | 200 ± 50 fF |
| Operating Voltage | ±2.2 to ±8 V |
| Operating Temperature | –10 to +50 °C |
| Output Polarity | Positive (P) |
| Required Signal Conditioning | Lock-in amplifier (e.g., DCS500PA recommended) |
| Optimal Modulation Frequency | ~10 Hz |
| Output Mode | Voltage |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | KV104-1-A-3/11 |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Model | DSi Series |
| Type | Silicon Photodiode Detector (Room-Temperature, Current-Output) |
| Spectral Range | DSi200: 200–1100 nm (UV-enhanced) |
| DSi300 | 350–1100 nm (Blue-enhanced) |
| Active Area | 100 mm² (Φ11.28 mm) |
| Peak Responsivity | DSi200: 0.52 A/W @ 820 nm |
| DSi300 | ≥0.55 A/W @ 970 nm |
| UV Responsivity | DSi200: ≥0.09 A/W @ 254 nm |
| DSi300 | ≥0.15 A/W @ 410 nm |
| Rise Time | 5.9 µs |
| Operating Temperature | −10 to +60 °C |
| Storage Temperature | −20 to +70 °C |
| Shunt Resistance | DSi200: >5 MΩ |
| DSi300 | >10 MΩ |
| NEP | DSi200: 4.5×10⁻¹³ W/√Hz |
| DSi300 | 2.0×10⁻¹³ W/√Hz |
| Max. Bias-Free Current | DSi200: 0.11 mA |
| DSi300 | 0.0 mA |
| Junction Capacitance @ 0 V | DSi200: 4500 pF |
| DSi300 | 8800 pF |
| Output Polarity | Positive (P-type anode) |
| Output Mode | Photocurrent (unamplified, high-impedance current source) |
| Origin | Israel |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PD300 |
| Pricing | Available Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | OM512 |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | DCS103 |
| Pricing | Upon Request |
| Input Channels | 2 × I/V (selectable current/voltage mode) |
| Current Range | ±5 pA (LSB) to ±40 µA (LSB) |
| Voltage Range | ±0.5 µV (LSB) to ±4 V (LSB) |
| A/D Resolution | ±15 bits |
| D/A Output | 2 × 0–10 V, 12-bit resolution |
| Trigger Input | TTL, ≥0.5 µs pulse width, ≤2 MHz frequency |
| Trigger Output Modes | (1) Sampling-end sync pulse (25 µs, 5 V) |
| Max Sampling Rate | 17,947 samples/sec (55.7184 µs/sample) |
| Interfaces | RS232, USB 2.0 |
| Dimensions | 240 × 240 × 120 mm |
| Weight | 3 kg |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Region of Origin | Domestic (China) |
| Model | PMTH-S1-(x) |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Region of Origin | Domestic (China) |
| Model | LSH-D30 |
| Price | Upon Request |
| Lamp Power | 30 W |
| Lamp Current | 300 mA |
| Lamp Voltage | 70–90 V |
| Ignition Voltage | >350 V DC |
| Emission Region Diameter | Ø1 mm |
| Average Lamp Lifetime | 2000 h |
| Light Output Stability (Irradiance Fluctuation) | ≤0.5% RMS |
| Current Stability (LSP-D30) | ≤0.05% per hour |
| Input Voltage (LSP-D30) | 24 V DC |
| Optical Axis Height Adjustment Range | 115–154 mm |
| Spectral Output Range | 200–400 nm |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Variants | LARRY, LARRY-PC, LARRY-USB |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SD Series |
| Pricing | Upon Request |
| Filter Mounting Capacity | Up to 6 positions |
| Filter Diameters | Ø18 mm (SD-E variant) or Ø25 mm (SD25 variant) |
| Effective Clear Aperture | Ø22 mm (SD25) |
| Compatibility | Designed for ZOLIX “Spectrum King” and “Imaging Spectrum King” spectrographs/monochromators |
| Control Modes | Automatic indexing with zero-reference homing (when enabled), manual operation (when disabled) |
| Optional Controller | SC300 Series standalone controller |
| Standard Filter Options | 10 predefined spectral filter types available |
| Customization | Available upon request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | DInGaAs1650 / DInGaAs1700-R03M / DInGaAs2600-R03M |
| Pricing | Upon Request |
| Active Area Diameter | 3 mm |
| Spectral Range | 800–1700 nm (DInGaAs1650 & DInGaAs1700-R03M), 800–2600 nm (DInGaAs2600-R03M) |
| Peak Responsivity | ≥0.85 A/W (DInGaAs1650), ≥0.9 A/W (DInGaAs1700-R03M), ≥1.1 A/W (DInGaAs2600-R03M) |
| Max Dark Current | 200 nA (DInGaAs1650), 100 nA (DInGaAs1700-R03M), 1 mA (DInGaAs2600-R03M) |
| Typical D* | 2.3×10¹² cm·Hz¹ᐟ²/W (DInGaAs1650), 4.1×10¹⁰ cm·Hz¹ᐟ²/W (DInGaAs1700-R03M), — (DInGaAs2600-R03M) |
| Typical NEP | 1.2×10⁻¹³ W/Hz¹ᐟ² (DInGaAs1650), 6.5×10⁻¹² W/Hz¹ᐟ² (DInGaAs1700-R03M) |
| Shunt Resistance | 1 MΩ (DInGaAs1650), 1.5 MΩ (DInGaAs1700-R03M), 320 Ω (DInGaAs2600-R03M) |
| Capacitance | 1500 pF (DInGaAs1650), 800 pF (DInGaAs1700-R03M), 9000 pF (DInGaAs2600-R03M) |
| Rise Time | 160 ns (DInGaAs1650), 100 ns (DInGaAs1700-R03M), 1 μs (DInGaAs2600-R03M) |
| Output Mode | Photocurrent (unamplified, positive polarity) |
| Brand | ZOLIX |
|---|---|
| Model | PMTH Series |
| Cooling Type | Thermoelectric (TE) |
| Detector Type | Side-Window Photomultiplier Tube (PMT) |
| Compatible PMT Models | CR131, R928 |
| Spectral Range | 185–900 nm |
| Peak Wavelength | 400 ± 30 nm |
| Cathode Sensitivity (peak) | 74 mA/W |
| Peak Quantum Efficiency | 25.4% @ 260 nm |
| Gain | 1.0 × 10⁷ |
| Cathode Active Area | 8 × 24 mm |
| Cathode Luminous Sensitivity | 140–250 µA/lm |
| Anode Luminous Sensitivity | 1000–2500 A/lm |
| Typical Anode Dark Current | 3 nA |
| Max Anode Dark Current | 50 nA |
| Photocathode Material | Multi-alkali (S-20) |
| Dynode Structure | Box-and-Grid (9-stage) |
| Window Material | UV-Transmitting Glass |
| Anode Rise Time | 2.2 ns |
| Electron Transit Time | 22 ns |
| Cathode-to-Anode Voltage | 1250 V |
| Cathode-to-Last-Dynode Voltage | 250 V |
| Operating Ambient Temperature | −80 to +50 °C |
| Achievable Cooling Temperature | −10 °C (at 20–25 °C ambient) |
| Dark Count Rate (1 s integration, −10 °C) | 150–250 cps |
| HV Power Supply | Integrated, Low-Ripple, Adjustable Output |
| Brand | ZOLIX |
|---|---|
| Model | DCS300PA |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (Producer) |
| Input Channels | 2 × I/V (selectable voltage/current) |
| Voltage Input Range | ±100 µV to ±10 V (FS) |
| Current Input Range | ±100 nA to ±100 mA (FS) |
| Voltage Gain | 10²–10⁴ |
| Current Gain | 10³–10⁷ |
| Integration Time | 10 µs–10 s |
| AUX Input | 1 × DC 0–10 V |
| Temperature Input | AD950-compatible thermistor channel |
| A/D Resolution | 16 bits |
| D/A Outputs | 2 × DC 0–10 V, 12-bit resolution |
| Trigger I/O | TTL rising-edge input + programmable output |
| Digital I/O | 5 inputs, 2 TTL outputs |
| Interface | USB 2.0 |
| Compliance | CE |
| Power | DC 24 V, 0.3 A |
| Dimensions | 240 × 240 × 120 mm |
| Weight | 3.3 kg |
| Origin | UK |
|---|---|
| Distribution Model | Authorized Distributor |
| Import Status | Imported |
| Models | IRA-256, IRA-512 |
| Interface Options | USB 14-bit, PCI 12-bit |
| Pixel Count | 256 or 512 |
| Pixel Size | 50 µm × 500 µm |
| Pixel Pitch | 50 µm |
| Spectral Range | 800–1700 nm |
| Cooling Method | TE (Peltier) |
| Operating Chip Temperature | < +5 °C (at 24 °C ambient) |
| Full Well Capacity (typ.) | 5×10⁶ e⁻ (high-sensitivity mode), 130×10⁶ e⁻ (high-dynamic-range mode) |
| Read Noise (rms, typ.) | 800 e⁻ (HS), 10 k e⁻ (HDR) |
| Dark Current (rms, typ.) | 190 k e⁻/s (IRA-256), 182.2 k e⁻/s (IRA-512) |
| 1-s Dark Noise (rms, typ.) | 436 e⁻ (IRA-256), 426 e⁻ (IRA-512) |
| Integration Time | 0.01–10 s |
| Analog Output Range | 0–10 V |
| Frame Rate (real-time) | >20 spectra/s |
| Defective Pixel Count | ≤5 (non-adjacent) for IRA-512 |
Show next