FLUKO
Filter
Showing all 28 results
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | EU50 PRO |
| Max. Mixing Volume | 30 L |
| Speed Range | 30–2000 rpm |
| Max. Torque | 50 N·cm |
| Power Input | 150 W |
| Voltage | 200–240 V, 50/60 Hz |
| Timer Range | 0–99 h 59 min 59 s |
| Speed Resolution | 1 rpm |
| Temp. Measurement Range | −50 to 400 °C (with optional PT1000 sensor) |
| Temp. Accuracy | ±(0.15 + 0.002 |
| IP Rating | IP30 |
| Weight | ~5.9 kg |
| Housing Material | Aluminum Alloy |
| Stirring Shaft | Adjustable Length |
| Standard Impeller | Four-blade helical, SS316L |
| Chuck Capacity | 0.5–10 mm |
| Tilt Safety Cut-off | ≥30° tilt angle |
| Communication Interface | DB-9 & USB Type-C |
| Compliance | CE-marked per IEC 61000-6-3/-4, EN 61326-1 (EMC & Electrical Safety) |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | EU70PRO |
| Instrument Type | Electronic Stirrer |
| Max. Mixing Volume (H₂O) | 50 L |
| Speed Range | 30–2000 rpm |
| Max. Output Torque | 70 N·cm |
| Power Input | 205 W |
| Voltage/Frequency | 200–240 V, 50/60 Hz |
| Timer Range | 0 s–99 h 59 min 59 s |
| Speed Control | Continuous, 1 rpm resolution |
| Display | TFT LCD |
| Stirring Shaft | Adjustable length |
| Standard Impeller | Four-blade helical, SS316L |
| Chuck Capacity | 0.5–10 mm |
| Reversibility | Yes |
| Tilt Protection | Auto-stop at ≥30° inclination |
| Temp. Measurement | Optional PT1000 sensor (–50 to +400 °C, accuracy: ±(0.15 + 0.002 |
| Data Interface | DB-9 & USB-C |
| IP Rating | IP30 |
| Housing Material | Aluminum alloy |
| Dimensions (W×D×H) | 220 × 350 × 720 mm |
| Weight | ~5.9 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | F10-101-S |
| Instrument Type | Probe-type rotor-stator homogenizer |
| Dimensions (W×D×H) | 420 × 100 × 50 mm |
| Processing Volume | 0.1–150 mL |
| Power | 160 W |
| Voltage/Frequency | 220 V, 50/60 Hz |
| Speed Range | 5,000–35,000 rpm |
| Speed Control | Continuously variable (analog dial) |
| Max. Viscosity | 200 mPa·s |
| Material in Contact | SS316L stainless steel |
| Shaft Sleeve Material | PTFE |
| Standard Generator Probe | 10GZL-1 (10 mm diameter, L = 120 mm) |
| Operating Environment | 5–40 °C, ≤80% RH |
| Process Mode | Batch, micro-to-small scale |
| Weight | ~0.85 kg |
| Safety | Double-insulated housing, IP20 rating |
| Compliance | CE-marked per EN 61000-6-2/6-4, EN 61000-3-2/3-3 |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | F18 |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Power | 200 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Processing Volume (H₂O) | 100–2000 mL |
| Maximum Viscosity | 8000 cP |
| Speed Range | 300–23000 rpm |
| Speed Display | Analog Scale |
| Speed Control | Continuous (Infinitely Variable) |
| Contact Material | SS304 Stainless Steel |
| Shaft Sleeve Material | PTFE |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Operation Mode | Batch |
| Standard Work Probes | 12G and 18G |
| Dimensions (W×D×H) | 225 × 328 × 600 mm |
| Weight | ~9 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | F22Z-571-S |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 477 × 120 × 122 mm |
| Processing Capacity | 15 L |
| Power | 500 W |
| Voltage/Frequency | 220 V, 50/60 Hz |
| Flow Rate (Water) | 1–15 L/min |
| Max. Viscosity | 1000 cP |
| Speed Range | 10,000–28,000 rpm |
| Max. Operating Temperature | 120 °C |
| Wetted Materials | SS316L, FKM, SiC |
| Inlet/Outlet OD | 14 mm (hose barb) |
| Base Material | SS304 |
| Weight | ~6 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | F30Z-581-S |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 665×120×135 mm |
| Processing Capacity | 20 L |
| Power | 1050 W |
| Voltage/Frequency | 220 V, 50/60 Hz |
| Flow Rate (Water) | 1–20 L/min |
| Max. Viscosity | 1000 cP |
| Speed Range | 3500–25,000 rpm |
| Max. Operating Temperature | 120 °C |
| Standard Housing Material | SS304 |
| Standard Working Chamber | Stainless Steel (Unjacketed) |
| Standard Rotor-Stator Head | 25DG |
| Shaft Seal Materials | Silicon Carbide (SiC), FKM |
| Inlet/Outlet OD | 14 mm (Flexible Hose Connection) |
| Display | Analog Scale (F30Z) |
| Weight | ~7 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | F40Z-591-S |
| Instrument Type | Probe-type rotor-stator homogenizer |
| Dimensions (W×D×H) | 675 × 200 × 175 mm |
| Processing Capacity | 30 L |
| Power | 1800 W |
| Voltage/Frequency | 220 V, 50/60 Hz |
| Flow Rate (Water) | 1–30 L/min |
| Max. Viscosity | 1000 cP |
| Speed Range | 2500–23,500 rpm |
| Tip Speed | up to 40 m/s |
| Max. Operating Temperature | 120 °C |
| Wetted Materials | SS316L (work chamber & rotor/stator), SiC/FKM mechanical seal |
| Inlet/Outlet OD | 18 mm (hose barb) |
| Base Material | SS304 |
| Weight | ~12 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | F7 |
| Quotation | Available Upon Request |
| Power | 160 W |
| Voltage/Frequency | 220 V, 50/60 Hz |
| Processing Volume (H₂O) | 1–20 mL |
| Maximum Viscosity | 200 cP |
| Speed Range | 5,000–35,000 rpm |
| Speed Control | Continuously Variable |
| Wetted Materials | Polysulfone (PSU) |
| Standard Working Tip | 7GP Polysulfone Homogenizing Probe |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Process Mode | Micro-batch |
| Included Accessories | Stand Mount |
| Dimensions (L×W×H) | 420 × 100 × 50 mm |
| Weight | ~0.85 kg |
| Packaging | Corrugated Cardboard Box |
| Optional Consumables | 7GP PSU probe packs (12 pcs/pack or 24 pcs/pack) |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | F8-085-S |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 375 × 65 × 50 mm |
| Processing Volume | 1.5–60 mL |
| Power Supply | 12 V DC Rechargeable Li-ion Battery (2 Ah) |
| Charging Input | 220–240 V AC, 50–60 Hz |
| Charging Output | 12 V DC, 3 A |
| Speed Range | 0–25,000 rpm |
| Speed Control | Continuous Variable |
| Max. Viscosity | 100 cP |
| Continuous Run Time (Water) | ~1 h |
| Contact Material | SS316L |
| Shaft Sleeve Material | PTFE |
| Standard Probes | 6GZL-1, 8GZL-1 |
| Operating Environment | 5–40 °C, ≤80% RH |
| Net Weight (Host + Probe) | ~1 kg |
| Package Weight | ~6.5 kg |
| Case | Aluminum Carry Case (475 × 400 × 150 mm) |
| Compliance | CE-marked for laboratory use under IEC 61010-1 |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | F9 |
| Price | Upon Request |
| Power Supply | 12 V DC rechargeable lithium battery |
| Charger Input | 220–240 V AC, 50–60 Hz |
| Charger Output | 12 V DC, 3 A |
| Battery Capacity | 2 Ah |
| Processing Volume (H₂O) | 1–20 mL |
| Max. Viscosity Handling | 100 cP |
| Continuous Operation Time (H₂O) | ~1 h |
| Speed Range | 0–25,000 rpm |
| Speed Control | Stepless (infinitely variable) |
| Battery Level Indicator | Yes |
| Wetted Materials | Polysulfone |
| Shaft Sleeve Material / Standard Probe | 7GP Polysulfone Homogenizing Probe |
| Operating Environment | 5–40 °C, ≤80 % RH |
| Process Mode | Micro-batch |
| Included Accessories | Stand, charger, spare battery, host unit (with probe), medical scissors, tissue forceps, sampling tubes, centrifuge tubes, sample vials |
| Host Dimensions (L×W×H) | 375 × 65 × 50 mm |
| Carrying Case Dimensions (L×W×H) | 520 × 470 × 190 mm |
| Host Weight (incl. probe) | ~1 kg |
| Total Package Weight | ~8.5 kg |
| Case Material | Aluminum alloy carrying case |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | FA25-052-S |
| Instrument Type | Probe-Type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 215 × 310 × 730 mm |
| Processing Volume Range | 0.2–7000 mL (H₂O) |
| Power | 500 W |
| Voltage/Frequency | 220 V, 50 Hz / 110 V, 60 Hz |
| Speed Range (No-Load) | 10,000–28,000 rpm |
| Max. Viscosity | 8,000 cP |
| Speed Display | Digital |
| Speed Control | Continuous Variable |
| Wetted Materials | SS316L |
| Shaft Sleeve Material | PTFE |
| Standard Probe | 25F |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Process Mode | Batch |
| Stand & Base | Included |
| Weight | ~7.1 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | FA25-032-S |
| Instrument Type | Probe-type rotor-stator homogenizer |
| Dimensions (W×D×H) | 215 × 310 × 730 mm |
| Processing Volume | 0.2–7000 mL |
| Motor Power | 500 W |
| Speed Range (no-load) | 10,000–28,000 rpm |
| Max. Tip Speed | 27 m/s |
| Viscosity Limit | 8,000 cP |
| Contact Material | SS316L |
| Shaft Sleeve Material | PTFE |
| Display | Digital RPM readout |
| Speed Control | Continuous electronic adjustment |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Operation Mode | Batch processing |
| Weight | ~7.1 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | FA25-021-S |
| Instrument Type | Probe-type rotor-stator homogenizer |
| Dimensions (W×D×H) | 215 × 310 × 730 mm |
| Processing Volume | 0.2–7000 mL |
| Power | 500 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Speed Range (no-load) | 10,000–28,000 rpm |
| Max. Tip Speed | 27 m/s |
| Viscosity Handling | up to 8,000 cP |
| Display | Digital speed readout |
| Speed Control | Continuous variable |
| Wetted Materials | SS316L |
| Shaft Sleeve Material | PTFE |
| Ambient Temperature | 5–40 °C |
| Relative Humidity | ≤80% |
| Duty Cycle | Continuous operation |
| Weight | ~7.1 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | FA25-011-S |
| Instrument Type | Probe-type rotor-stator homogenizer |
| Dimensions (W×D×H) | 215 × 310 × 730 mm |
| Processing Volume | 0.2–7000 mL |
| Power | 500 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Speed Range (no-load) | 10,000–28,000 rpm |
| Max. Tip Speed | 27 m/s |
| Display | Digital speed readout |
| Speed Control | Continuously variable |
| Contact Material | SS316L |
| Shaft Sleeve Material | PTFE |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Operation Mode | Batch processing |
| Weight | ~7.1 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | FA25D-052-S |
| Instrument Type | Probe-type rotor-stator homogenizer |
| Dimensions (W×D×H) | 215 × 310 × 730 mm |
| Processing Volume Range | 0.2–7000 mL |
| Power | 500 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Speed Range (no-load) | 10,000–28,000 rpm |
| Max. Tip Speed | 27 m/s |
| Display | Digital RPM readout |
| Speed Control | Continuous electronic adjustment |
| Contact Material | SS316L |
| Shaft Sleeve Material | PTFE |
| Standard Probe | 25F |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Operation Mode | Batch processing |
| Weight | ~7.1 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | FA25D-011-S |
| Instrument Type | Probe-type rotor-stator homogenizer |
| Dimensions (W×D×H) | 215 × 310 × 730 mm |
| Processing Volume | 0.2–7000 mL |
| Power | 500 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Speed Range (no-load) | 10,000–28,000 rpm |
| Max. Tip Speed | 27 m/s |
| Viscosity Handling | up to 8,000 cP |
| Material Contact | SS316L |
| Shaft Sleeve Material | PTFE |
| Display | Digital speed readout |
| Speed Control | Continuously variable |
| Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Duty Cycle | Continuous operation |
| Weight | ~7.1 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | FA30-111-S |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 215 × 310 × 730 mm |
| Processing Volume | 0.2–10,000 mL |
| Power | 1050 W |
| Voltage/Frequency | 220 V, 50/60 Hz |
| Speed Range | 3500–25,000 rpm |
| Max. Tip Speed | 35 m/s |
| Max. Viscosity | 8000 cP |
| Display | Analog Tachometer Scale |
| Speed Control | Continuous Variable (Analog) |
| Wetted Materials | SS316L |
| Shaft Sleeve Material | PTFE |
| Standard Generator | 30G |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Protection Rating | IP20 |
| Weight | ~9.8 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | FA30D-111-S |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 215 × 310 × 730 mm |
| Processing Volume | 0.2–10,000 mL |
| Power | 1050 W |
| Voltage/Frequency | 220 V, 50/60 Hz |
| Speed Range | 3500–25,000 rpm |
| Max. Tip Speed | 35 m/s |
| Max. Viscosity | 8000 cP |
| Display | Digital RPM Readout |
| Speed Control | Continuous Variable |
| Wetted Materials | SS316L |
| Shaft Sleeve Material | PTFE |
| Standard Probe | 30G |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Protection Class | IP20 |
| Weight | ~9.8 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FA40 |
| Instrument Type | Probe-Type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 250 × 375 × 860 mm |
| Processing Volume | 500–15,000 mL |
| Motor Power | 1800 W |
| Voltage/Frequency | 220 V, 50/60 Hz |
| Speed Range | 2,500–23,500 rpm |
| Maximum Tip Speed | 40 m/s |
| Max. Viscosity | 8,000 cP |
| Shaft Seal Material | PTFE |
| Wetted Parts Material | SS316L |
| Speed Display | Analog Dial |
| Speed Control | Continuous Variable |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Protection Rating | IP20 |
| Net Weight | ~12 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FA40D |
| Quotation | Available Upon Request |
| Power | 1800 W |
| Voltage/Frequency | 220 V, 50/60 Hz |
| Processing Volume (H₂O) | 500–15,000 mL |
| Max. Viscosity | 8,000 cP |
| Speed Range | 2,500–23,500 rpm |
| Tip Speed | Up to 40 m/s |
| Speed Display | Digital LED |
| Speed Control | Continuous Variable (0–100%) |
| Wetted Materials | SS316L |
| Shaft Seal Material | PTFE |
| Standard Working Head | 40M |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% RH |
| Motor Protection Rating | IP20 |
| Dimensions (W×D×H) | 250 × 375 × 860 mm |
| Net Weight | ~12 kg |
| Base & Stand | Integrated Vertical Support with Adjustable Clamping Arm |
| Packaging | Wooden Export Crate |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FA60-161-E |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 500 × 400 × 915 mm |
| Processing Volume | 5–30 L |
| Power | 750 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Speed Range | 300–6000 rpm |
| Speed Display | Digital |
| Speed Control | Frequency Inverter |
| Contact Material | SS316L |
| Shaft Sleeve Material | PTFE |
| Standard Working Head | 60F |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Motor Protection Rating | IP54 |
| Overload Protection | Integrated |
| Operation Mode | Batch |
| Lift Mechanism | Electric Column (Stroke: 350 mm) |
| Frame & Base Material | SS304 |
| Weight | ~35 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | FA90-241-E |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 710 × 550 × 1060 mm |
| Processing Capacity | 10–50 L |
| Power | 1500 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Speed Range | 600–3600 rpm |
| Speed Display | Digital |
| Speed Control | Frequency Inverter |
| Wetted Materials | SS316L |
| Shaft Sleeve Material | PTFE |
| Standard Working Head | 90F |
| Max. Viscosity | 8000 cP |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Motor Protection Rating | IP54 |
| Overload Protection | Integrated |
| Operation Mode | Batch Processing |
| Lift Mechanism | Electrically Actuated Column (400 mm Stroke) |
| Base & Support Frame Material | SS304 / Carbon Steel with Powder Coating |
| Net Weight | ~50 kg |
| Packaging | Wooden Crate |
| Optional Lift Systems | Manual Hydraulic or Counterweight-Assisted |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FA90C-242-M |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 710 × 550 × 1060 mm |
| Processing Capacity | 10–50 L |
| Power | 1500 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Speed Range | 600–3600 rpm |
| Speed Display | Digital |
| Speed Control | Frequency Inverter |
| Wetted Materials | SS316L |
| Standard Working Head | 90F |
| Max. Viscosity | 8000 mPa·s |
| Ambient Temperature | 5–40 °C |
| Relative Humidity | ≤80% |
| Motor Protection Rating | IP54 |
| Overload Protection | Integrated |
| Operation Mode | Batch |
| Lift Mechanism | Manual Hydraulic |
| Lift Stroke | 400 mm |
| Base & Stand Material | SS304 |
| Weight | ~50 kg |
| Packaging | Wooden Crate |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | FM20D-S-S |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 210 × 290 × 675 mm |
| Processing Volume | 150–3000 mL |
| Power | 500 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Speed Range | 2000–14,000 rpm |
| Speed Display | Digital LED |
| Speed Control | Continuously Variable |
| Torque Output | High |
| Rotor-Stator Configuration | Dual-stator design |
| Wetted Materials | SS316L |
| Shaft Sleeve Material | Copper Alloy |
| Max. Viscosity | 5000 cP |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Operation Mode | Batch |
| Weight | ~10 kg |
| Brand | FLUKO |
|---|---|
| Origin | Germany |
| Model | FM300 |
| Power | 300 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Processing Volume (H₂O) | 200–10,000 mL |
| Max. Viscosity | 5,000 cP |
| Speed Range | 300–11,000 rpm |
| Speed Display | Analog Scale |
| Speed Control | Continuously Variable |
| Rotor-Stator Configurations | Round-Orifice, Slotted, Mesh-Type |
| Wetted Materials | AISI 304 Stainless Steel |
| Shaft Sleeve Material | Copper Alloy |
| Operating Ambient Temperature | 5–40 °C |
| Max. Relative Humidity | ≤80% |
| Process Mode | Batch |
| Base & Stand | Included |
| Independent Speed Controller | Included |
| Dimensions (W×D×H) | 210 × 290 × 675 mm |
| Weight | ~13 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | FM300-S-S |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 210 × 290 × 675 mm |
| Processing Volume (H₂O) | 200–10,000 mL |
| Power | 300 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Speed Range | 300–11,000 rpm |
| Speed Display | Analog Dial |
| Speed Control | Continuous (Stepless) |
| Max. Viscosity | 5,000 cP |
| Wetted Materials | SS304 |
| Shaft Sleeve Material | Copper Alloy |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Process Mode | Batch |
| Weight | ~13 kg |
| Stator Configurations | Round-hole, Slit-type, Mesh-type |
| Brand | FLUKO |
|---|---|
| Origin | Germany |
| Model | FM30D |
| Power | 500 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Processing Volume (H₂O) | 200–10,000 mL |
| Max. Viscosity | 5,000 cP |
| Speed Range | 2,000–14,000 rpm |
| Speed Display | Digital LED |
| Speed Control | Continuously Variable |
| Rotor-Stator Configuration | Dual-stator design |
| Standard Stator Type | Round-hole |
| Optional Stator Types | Slit-type, Mesh-type |
| Wetted Materials | AISI 304 Stainless Steel |
| Shaft Sleeve Material | Copper Alloy |
| Ambient Operating Temperature | 5–40 °C |
| Max. Relative Humidity | ≤80% |
| Operation Mode | Batch |
| Footprint (W×D×H) | 360 × 260 × 760 mm |
| Weight | ~10 kg |
| Brand | FLUKO |
|---|---|
| Origin | Shanghai, China |
| Model | FM30D-S-S |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 360 × 260 × 760 mm |
| Processing Volume (H₂O) | 200–10,000 mL |
| Power | 500 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Speed Range | 2000–14,000 rpm |
| Speed Display | Digital LED |
| Speed Control | Continuous (Infinitely Variable) |
| Torque Output | High |
| Rotor-Stator Configuration | Dual-Stator Design |
| Compatible Stator Types | Round-hole, Slit-type, Mesh-type |
| Wetted Materials | SS304 Stainless Steel |
| Shaft Sleeve Material | Copper Alloy |
| Ambient Operating Temperature | 5–40 °C |
| Max. Relative Humidity | 80 % RH |
| Process Mode | Batch |
| Weight | ~10 kg |