KJ GROUP
Filter
Showing 301–330 of 475 results
| Brand | KJ GROUP |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SP-25TC |
| Pricing | Upon Request |
| Maximum Input Power | 25 kW |
| Operating Frequency Range | 30–80 kHz |
| Continuous Working Temperature | 1000–2000 °C |
| Max. Short-Term Temperature | 1700 °C (<30 min) |
| Temperature Control Accuracy | ±5 °C |
| Programmable Ramp Segments | 30 |
| Max. Heating Rate | 1 °C/s (0–1000 °C), 0.5 °C/s (1200–1700 °C) |
| Quartz Tube Dimensions | Ø100 mm OD × Ø92 mm ID × 355 mm L |
| Graphite Crucible | Ø40 mm OD × Ø37.1 mm ID × 100.5 mm H |
| Vacuum System | Dual-stage rotary vane pump (120 L/min, base pressure 10⁻² torr) |
| Cooling | Recirculating chiller (12 L stainless steel tank, 16 L/min flow, 5–30 °C setpoint) |
| Safety Protections | Auto water-pressure cutoff, over-temperature shutdown, over-power limiter, thermocouple break detection |
| Compliance | Designed for ISO/IEC 17025-compliant lab environments |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SP-25VIM |
| Pricing | Available Upon Request |
| Induction Heater | SP-25A (2–25 kW, 30–80 kHz) |
| Cooling System | Integrated Chiller (4 L/min, 4 L reservoir, 5–35 °C) |
| Vacuum System | 550 W Pump (226 L/min) with KF25 Flange |
| Quartz Crucible | Ø36 mm ID × 78 mm H (79 mL capacity) |
| Quartz Tube | Ø75 mm ID × 300 mm L |
| Induction Coil | Ø85 mm ID × 50 mm H |
| Operating Vacuum Level | ≤5 × 10⁻² mbar (with standard pump) |
| Argon Purity Requirement | ≥99.99% |
| Max Sample Mass | ~100 g (steel equivalent) |
| Safety Protections | Auto-shutdown on overpressure, overtemperature, coolant flow loss, and power overload |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SP-AM-400 |
| Pricing | Upon Request |
| Ultimate Vacuum | 8×10⁻⁴ Pa |
| System Leak Rate | 5.0×10⁻⁷ Pa·L/s |
| Pumping Time (Atmosphere → 7×10⁻³ Pa) | ≤30 min |
| Operating Pressure Range | −0.5 MPa |
| Power Consumption | <60 kW |
| Crucible Dimensions | Φ100 mm × 15 mm |
| Max Sample Mass | 300 g |
| Sample Stage Rotation Speed | 1–20 rpm (continuously adjustable) |
| Cooling System | Closed-loop deionized water chiller |
| Process Atmosphere | High-purity argon (≥99.99%) |
| Safety Protections | Water flow/pressure monitoring, phase sequence detection, thermal overheat protection, vacuum integrity interlock |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic |
| Model | SP-AM-400A |
| Price | Upon Request |
| Ultimate Vacuum | 8×10⁻⁴ Pa |
| Max Operating Power | <60 kW |
| Working Pressure Range | −0.5 MPa |
| System Leak Rate | ≤5.0×10⁻⁷ Pa·L/s |
| Pump-Down Time (to 7×10⁻³ Pa) | ≤30 min |
| Vacuum Hold (12 h) | ≥10 Pa |
| Melting Temperature | Up to 3500 °C |
| Crucible Rotation Speed | 1–20 rpm (continuously adjustable) |
| Electrode Type | 4 × water-cooled tungsten electrodes (Φ6 mm) |
| Chamber Dimensions | Φ300 mm × 370 mm |
| Argon Purity Requirement | ≥99.99% |
| Cooling | Integrated closed-loop deionized water chiller (KJ CW-6200) |
| Compliance | Designed for ASTM F2627 (Standard Guide for Arc-Melting of Refractory Metals), ISO 15148 (Vacuum Technology — Vocabulary), and GLP-compliant lab environments |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | SP-MSM-130 |
| Pricing | Upon Request |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | SP-MSM-16AT |
| Max Operating Temperature | 3500 °C |
| Power Supply | AC 220/380 V, 50 ±0.5 Hz |
| Total Power Consumption | <40 kW |
| Cooling Capacity | 16 L/min (integrated KJ-5300 chiller) |
| Electrode | Ø6 mm tungsten with water cooling |
| Crucible Array | 16 × Ø20 mm water-cooled copper crucibles |
| Arc Current Range | 20–300 A DC |
| Ignition Method | High-frequency start |
| Gas Purity Requirement | Ar ≥99.999% (5N), H₂/Ar mixture (5% H₂ / 95% Ar) for regeneration |
| Glovebox Atmosphere Control | H₂O & O₂ <1 ppm (continuous monitoring via integrated dew point & O₂ analyzers, ±0.1 ppm accuracy) |
| Glovebox Dimensions (L×W×H) | 2715×1050×900 mm |
| Transition Chamber | Dual (360×700 mm and 150×300 mm) |
| Weight | ~700 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | SP-MSM1000 |
| Max Operating Temperature | 3500 °C |
| Base Vacuum | ≤1×10⁻⁶ torr (with turbomolecular pump, cold state) |
| Chamber Dimensions | Φ400 mm × 350 mm |
| Cooling | Dual-loop deionized water system (flow rate: 2 m³/h |
| pressure | 0.2–0.4 MPa |
| temp | 15–25 °C) |
| Arc Power Supply | 22.6 kW, max arc current: 630 A |
| Total System Power | ≤27 kW (380 V, 3-phase, 50/60 Hz) |
| Crucible Capacity | up to 500 g per station |
| Optional Modules | Suction casting (Φ8×75 mm), gravity casting (Φ20×80 mm) |
| Compliance | Designed for ASTM F2629, ISO 15148, and GLP-compliant metallurgical sample preparation workflows |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SP-MSM130 |
| Pricing | Upon Request |
| Maximum Melting Temperature | >3500 °C |
| Chamber Material | Fused Quartz (transparent) |
| Chamber Dimensions | Ø168 × 142 mm |
| Electrode | Tungsten, Ø4 mm, adjustable angle/height |
| Arc Current Range | 30–255 A DC |
| Crucible Configuration | 5-position water-cooled copper crucible (4 × hemispherical Ø23 × 7 mm + 1 Ta-tube sealing station Ø10–20 mm, L = 30–90 mm) |
| Sample Capacity | ≤8 g per melt (Fe-standardized) |
| Gas Control | Argon atmosphere with pressure gauge (−0.1 to +0.15 MPa) |
| Cooling System | KJ5000 recirculating chiller (6 L reservoir, 16 L/min flow, 2.87 kW refrigeration capacity) |
| Vacuum System | VRD-8 rotary vane pump (KF25 flange, 0.75 kW, ultimate vacuum ≤5 × 10⁻² mbar) |
| Power Supply | WS-250 DC arc source (20 V output, 10–250 A adjustable, 6.3 kVA input) |
| Operating Modes | Ambient air or inert-gas glovebox integration |
| Safety | Integrated quartz shield, interlocked chamber access, thermal overload protection |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SP-MSM200 |
| Pricing | Upon Request |
| Vacuum Chamber | Ø200 mm × 300 mm |
| Arc Ignition | High-Frequency Start |
| Output Current Range | 20–630 A |
| Electrode | Ø6 mm Tungsten (W), Non-Consumable |
| Max. Melting Temperature | 3500 °C |
| Cooling | Integrated Recirculating Chiller (Deionized Water) |
| Gas Atmosphere | High-Purity Argon (≥99.99%) |
| Standard Vacuum | –0.1 MPa (with Rotary Vane Pump) |
| Optional High Vacuum | 5.0 × 10⁻³ Pa (with Molecular Pump & Capacitance Manometer) |
| Crucible Configuration | 4 positions — three Ø25 mm hemispherical crucibles (20 g stainless steel capacity each), one Ø70 × 15 mm crucible (200 g stainless steel capacity) |
| Furnace Dimensions (L×W×H) | 900 × 600 × 1800 mm |
| Net Weight | 120 kg |
| Power Supply | AC 380 V, 50 Hz, 63 A circuit breaker required |
| Total Power Consumption | <30 kW |
| Brand | KJ GROUP |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SP-MSM32 |
| Pricing | Upon Request |
| Vacuum Glove Box Dimensions | 1200 × 900 × 750 mm (W×D×H), Front-Opening |
| Transition Chamber | 360 × 600 mm / 150 × 300 mm |
| Purification Capacity | H₂O/O₂ < 1 ppm (auto-regenerating) |
| Oxygen Analyzer Accuracy | ±0.1 ppm (0–999 ppm range) |
| Arc Electrode | Ø4 mm tungsten, water-cooled |
| Electrode Travel Range | ≥200 × 400 × 50 mm (X-Y-Z) |
| Water-Cooled Crucibles | 32 × Ø25 mm |
| Max Melting Temperature | 3000 °C |
| Adjustable Output Current | 10–250 A (AC 220 V, 50 Hz) |
| Optional Power Supply | 300 A (AC 380 V, 50 Hz) |
| Cooling System | KJ-5000 recirculating chiller |
| Protective Atmosphere | 5N Ar or 5% H₂ + 95% Ar |
| Safety | Integrated UV/IR shielding, mandatory eyewear during operation |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SP-MSM32 High-Throughput Arc Melting System |
| Dimensions (L×W×D) | 1200 × 900 × 750 mm |
| Maximum Melting Temperature | 3000 °C |
| Number of Melting Positions | 32 |
| Tungsten Electrode Diameter | 4 mm |
| Electrode Travel Range (X×Y×Z) | ≥200 × 400 × 50 mm |
| Water-Cooled Crucible Diameter | 25 mm |
| Power Supply Output Current Range | 10–250 A (adjustable) |
| Vacuum Glovebox Chamber Size | 1200 × 900 × 750 mm (single-front access) |
| Internal Atmosphere Purity | H₂O & O₂ < 1 ppm (with regeneration-capable purification system) |
| Cooling System | KJ-5000 Recirculating Chiller |
| Protective Atmosphere | 5N Argon or 5% H₂ + 95% Ar |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SP-MSM360 |
| Pricing | Upon Request |
| Vacuum Glove Box Dimensions | 1200 × 900 × 750 mm (front-opening), Transfer Chamber: 360 × 600 mm / 150 × 300 mm |
| Purification Performance | H₂O ≤ 1 ppm, O₂ ≤ 1 ppm (with auto-regeneration) |
| Electrode | Ø4 mm Tungsten, Water-Cooled |
| Electrode Travel Range | ≤380 × 300 × 50 mm (X-Y-Z) |
| Crucible Array | 32 × Ø25 mm Water-Cooled Copper Crucibles on 180 × 180 mm Insulated Base |
| Max Melting Temperature | 3500 °C |
| Power Supply | AC 380 V, 50 Hz |
| Output Current | 15–315 A |
| Cooling | KJ-5000 Recirculating Chiller |
| Protective Atmosphere | Ultra-High-Purity Argon (≥99.999%, H₂O ≤ 5 ppm, O₂ ≤ 5 ppm) |
| Safety | Integrated UV/IR-blocking viewing window, mandatory safety goggles required during operation |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SPC-1 |
| Pricing | Upon Request |
| Max Print Area | 70 mm × 50 mm |
| Min Print Area | 16 mm × 12 mm |
| X/Y Adjustment Range | ±20 mm (±0.01 mm resolution) |
| Z Adjustment Range | 3 mm (±0.05 mm resolution) |
| Screen Angle Adjustment | ±10° |
| Substrate Holding | Vacuum Chuck |
| Frame Dimensions (Top Outer) | 180 mm × 130 mm |
| Frame Dimensions (Bottom Outer) | 125 mm × 108 mm |
| Overall Dimensions (Closed) | 300 mm × 240 mm × 170 mm |
| Overall Dimensions (Open) | 300 mm × 240 mm × 330 mm |
| Weight | 11 kg |
| Operating Ambient | Altitude < 1000 m, Temperature 10–40 °C, Relative Humidity 45–65 %RH |
| Power Supply | AC 380 V, 50 Hz, 63 A circuit breaker with dedicated earth ground |
| Cooling | Integrated recirculating chiller (deionized or distilled water) |
| Process Gas | High-purity argon (≥99.99 %), supplied via Ø6 mm double-ferrule fitting |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SPC-32 |
| Pricing | Upon Request |
| Power Supply | Single-phase AC 208–240 V, 50/60 Hz |
| Rated Power | 2500 W |
| Print Table Dimensions | 330 mm × 400 mm |
| Maximum Print Area | 200 mm × 300 mm |
| Print Height Adjustment Range | 30 mm |
| Production Throughput | 300–500 pcs/h |
| Repeatability Accuracy | ±0.03 mm |
| Environmental Operating Conditions | Altitude <1000 m |
| Cooling | Integrated recirculating chiller (deionized or purified water) |
| Gas Requirement | Argon purge (≥99.99% purity), supplied via external cylinder with Ø6 mm dual-ferrule compression fitting |
| Electrical Safety | Dedicated 63 A circuit breaker, mandatory earth grounding |
| Mechanical Guidance | Precision linear rails with variable-frequency motor drive |
| 刮刀 System | Pneumatically assisted floating squeegee assembly with adjustable pressure and stroke speed |
| Alignment | Micrometer-driven X/Y/Z fine alignment stage for PCB-to-screen registration |
| Dual-side Independent Adjustment | Left/right independent lateral offset control for asymmetric or multi-size mesh frame compatibility |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | Spherical Pulsed Laser Deposition (PLD) System |
| Pricing | Upon Request |
| Operating Temperature | 10–35 °C |
| Relative Humidity | ≤75% |
| Power Supply | 220 V, Single-Phase, 50 ± 0.5 Hz |
| Max Power Consumption | <4 kW |
| Cooling Water Pressure | 0.2–0.4 MPa |
| Cooling Water Temperature | 15–25 °C |
| Vacuum Chamber | Spherical, Ø300 mm, Manual Front Door |
| Chamber Material | 304 Stainless Steel, TIG-Welded, Glass-Bead Blasted + Electrochemical Passivation |
| Ultimate Vacuum | ≤6.67×10⁻⁵ Pa (after bake-out, with 600 L/s turbo-molecular pump & 8 L/s backing pump) |
| Leak Rate | ≤5.0×10⁻⁷ Pa·L/s |
| Pump-Down Time to 8.0×10⁻⁴ Pa | ≤40 min |
| Vacuum Hold (12 h, pump-off) | ≤20 Pa |
| Substrate Holder | Ø40 mm, 1–20 RPM rotation |
| Substrate-to-Target Distance | 40–90 mm |
| Max Substrate Temperature | 800 °C, Temp Control Accuracy: ±1 °C |
| Rotating Target Carousel | 4 Positions, Ø40 mm per target, individual shuttering, coaxial laser incidence |
| Integrated Features | In-chamber bake-out heater, LED illumination, water-pressure alarm |
| Gas Flow Control | 1 Channel MFC, 0–100 sccm |
| Brand | KJ GROUP |
|---|---|
| Model | SR-C Series |
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic (China-Made) |
| Light Source | High-Intensity Halogen Lamp |
| Spectral Range | SR-CV: 380–800 nm |
| SR-CN | 650–1100 nm |
| Thickness Measurement Range | SR-CV: 50 nm – 20 µm |
| SR-CN | 100 nm – 200 µm |
| Measurement Time | <1 s |
| Spot Size | 0.5–3 mm |
| Repeatability | 0.1 nm (on 100 nm SiO₂/Si reference) |
| Absolute Accuracy | ±1 nm or 0.5% |
| Incidence Geometry | Normal Incidence (0°) |
| Key Algorithms | FFT-based thick-film analysis |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | SSR-3000 |
| Instrument Type | Portable / Handheld Raman Spectrometer |
| Spectral Range | 180–3300 cm⁻¹ |
| Spectral Resolution | 9 cm⁻¹ |
| Signal-to-Noise Ratio | 400:1 @ 100 ms integration time |
| Excitation Wavelength | 785 ± 0.5 nm |
| Laser Linewidth | < 0.06 nm |
| Output Power | 0–500 mW (digitally adjustable) |
| Integration Time | 10 ms – 20 min |
| Weight | < 4 kg |
| Dimensions | 370 × 270 × 120 mm |
| Power Supply | External AC 100–240 V, 50/60 Hz |
| Internal Battery | 12 V, 8000 mAh Li-ion (laptop-grade) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Category | Domestic |
| Model | STX-100QX |
| Instrument Type | Precision Diamond Wire Cutting System |
| X-Axis Travel | 200 mm |
| Y-Axis Travel | 280 mm |
| Max. Cutting Thickness | 120 mm |
| Positioning Accuracy | 0.01 mm |
| Wire Speed | 0–15 m/s |
| X/Y Feed Rate | 0.06–6 mm/min |
| Worktable Dimensions | 220 × 450 mm |
| Max. Sample Dimensions | 200 × 280 × 120 mm |
| Wire Tensioning Method | Pneumatic Tensioning |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | STX-1200-A |
| Pricing | Available Upon Request |
| Rated Load Capacity | ≤30 kg |
| A-Axis Rotation Speed | 0–30 rpm (adjustable) |
| A-Axis Oscillation Angle | ±5° to ±23° (adjustable) |
| A-Axis Oscillation Frequency | 20 cycles/min |
| Rotary Platform Diameter | Ø200 mm / Ø400 mm |
| Max. Rotary Cutting Diameter | Ø380 mm |
| Max. Oscillating Cutting Envelope | 180 mm (Y) × 260 mm (X) × 260 mm (Z) |
| Operating Ambient | Altitude ≤1000 m |
| Structural Material | Anodized Aluminum Alloy |
| Noise Level | Low |
| Power Consumption | Low |
| Positional Stability | High Reproducibility |
| Compliance | Designed for integration with STX-1203 Fully Automated Diamond Wire Saws |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | STX-1203 |
| Instrument Type | Precision Diamond Wire Saw |
| Power Supply | AC 220 V, 50 Hz |
| Max. Power Consumption | <475 W |
| Main Motor | 250 W AC Variable-Frequency Motor |
| Wire Feed Speed | 0–8 m/s (adjustable, digital display) |
| Max. Wire Length | ≤150 m |
| Max. Wire Diameter | ≤0.45 mm |
| Y-Axis Travel | ≤300 mm (digital readout, resolution 0.01 mm) |
| Z-Axis Travel | ≤300 mm (digital readout, resolution 0.01 mm) |
| Rotary Stage Range | 0–360° (resolution 0.01°, repeatability <0.032°) |
| Max. Sample Dimensions | Ø300 mm × 300 mm |
| Tension System | Pneumatic (0–1 MPa adjustable) |
| Safety Features | Wire-break auto-stop, emergency stop switch |
| Operating Environment | Altitude <1000 m, Temp. 10–40 °C, RH 45–65 % |
| Footprint | 1200 mm × 1100 mm × 1800 mm (clearance required) |
| Net Weight | ~200 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Category | Domestic |
| Model | STX-1203B |
| Instrument Type | Precision Diamond Wire Saw |
| Cutting Wire Speed | 0–15 m/s |
| Max. Workpiece Diameter & Length | Φ300 × 300 mm |
| Z/Y-Axis Travel | ≤300 mm each |
| Positioning Accuracy (Z/Y/R) | 0.01 mm |
| Wire Tensioning | Pneumatic (0–1 MPa) |
| Wire Length | ≤150 m |
| Wire Diameter | ≤0.45 mm |
| Worktable Load Capacity | ≤20 kg |
| Power Supply | AC 220 V / 50 Hz |
| Total Power Consumption | ~620 W |
| Net Weight | ~340 kg |
| Dimensions (L×W×H) | 1120 × 960 × 1820 mm |
| Environmental Requirements | Altitude <1000 m, Temp. 10–40 °C, RH 45–65 % |
| Safety Features | Wire-break auto-stop, emergency stop, acrylic safety enclosure |
| Control System | PLC + 7-inch touchscreen HMI |
| Motor Configuration | 370 W AC frequency inverter motor (main drive), precision stepper motors (Y/Z/R axes) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | STX-200QX |
| Instrument Category | Precision Diamond Wire Cutting System |
| X-Axis Travel | 400 mm |
| Y-Axis Travel | 400 mm |
| Max. Cutting Thickness | 100 mm |
| Positioning Accuracy | 0.01 mm |
| Wire Speed | 0–15 m/s |
| X/Y Axis Feed Rate | 0.06–6 mm/min |
| Worktable Dimensions | 500 × 600 mm |
| Max. Sample Dimensions | 400 × 400 × 100 mm |
| Wire Tensioning Method | Pneumatic Tensioning |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | STX-201 |
| Instrument Type | Precision Diamond Wire Cutting Machine |
| Wire Speed | 0–3.9 m/s |
| Spindle Speed | 0–900 rpm (effective range: 30–900 rpm) |
| Horizontal Feed Travel | ≤50 mm |
| Feed Resolution | 0.01 mm |
| Rotation Stage | 0–360° (graduation: 10′), Tilt: ±15° (graduation: 5′) |
| Max. Sample Thickness | ≤52 mm |
| Stage Dimensions | 80 × 51 mm |
| Power Supply | AC 110–230 V, 50 Hz, 10 A |
| Motor Power | 50 W |
| Dimensions (W×D×H) | 761 × 295 × 373 mm |
| Weight | 25 kg |
| Operating Environment | 0–45 °C, 10–85 % RH (non-condensing), vibration- and corrosion-free |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | STX-202A |
| Instrument Type | Precision Diamond Wire Saw |
| Frame Material | Aluminum Alloy |
| Power Supply | AC 220 V, 50 Hz, 10 A |
| Total Power | 100 W |
| Wire Length | ≤20 m |
| Wire Diameter | ≤0.45 mm |
| Wire Tensioning | Spring-loaded mechanical tensioner |
| Spindle Rotation Mode | Reciprocating |
| Spindle Speed | 2–260 rpm (adjustable) |
| Cutting Speed | 0.05–40 mm/min |
| Return Speed | 1–40 mm/min |
| Z-axis Stroke | ≤60 mm |
| Y-axis Stroke | ≤50 mm |
| Sample Holder Rotation | Horizontal 0–360°, Tilt ±15° |
| Max Wheel Inner Distance | 95 mm |
| Max Workpiece Size | Φ50 × 50 mm |
| Specimen Block Dimensions | 80 × 51 × 12 mm |
| Max Cutting Depth | ≤50 mm |
| Control System | PLC + 7-inch Touchscreen HMI |
| Operating Temp/Humidity | 0–45 °C, 10–85% RH (non-condensing) |
| Dimensions (W×D×H) | 414 × 500 × 810 mm |
| Weight | ~40 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | STX-202A-A |
| Instrument Type | Precision Diamond Wire Saw Accessory |
| Input Voltage | DC 24 V |
| Oscillation Angle | ±23° |
| Oscillation Frequency | 1–20 cycles/min |
| Rotation Direction | Bidirectional (Left/Right) |
| Rotation Count Range | 1–999 revolutions per cut cycle |
| Rotational Speed | 1–30 rpm |
| Max Sample Diameter for Rotary Cutting | Φ50 mm |
| Sample Stage Diameter | Φ48 mm |
| Dimensions | 140 × 54 × 81 mm |
| Weight | ~1 kg |
| Operating Environment | Altitude < 1000 m |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | STX-202AQ |
| Instrument Type | Precision Diamond Wire Cutting System |
| Frame Material | Aluminum Alloy Structure |
| Power Supply | AC 220 V ±10%, 50 Hz, 10 A |
| Total Power Consumption | 100 W |
| Wire Diameter Range | Ø0.08–0.45 mm |
| Maximum Wire Length | ≤20 m |
| Wire Tensioning Method | Adjustable Pneumatic Tensioning (≥0.6 MPa Air Source Required) |
| Spindle Drive Mode | Reciprocating Rotation |
| Spindle Speed | 2–260 rpm (Adjustable) |
| Feed Rate | 0.05–40 mm/min |
| Retract Speed | 1–40 mm/min |
| Z-Axis Travel | ≤60 mm |
| Y-Axis Travel | ≤50 mm |
| Sample Holder Dimensions | 80 × 51 × 12 mm |
| Max Sample Diameter | Φ50 mm |
| Two-Axis Manual Rotary Stage | Horizontal 0–360°, Tilt ±15° |
| Guide Wheel Inner Span | ≤95 mm |
| Operating Ambient | 0–45 °C, 10–85% RH (non-condensing) |
| Cooling | Required (cutting oil recommended) |
| Control System | PLC + 7-inch Touchscreen HMI |
| Net Weight | ~40 kg |
| Footprint | 414 × 500 × 810 mm |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | STX-202B |
| Pricing | Upon Request |
| Power Supply | AC 220 V, 50 Hz, 10 A |
| Total Power Consumption | 120 W (excluding air compressor) |
| Frame Material | Aluminum Alloy with Sheet Metal Enclosure |
| Diamond Wire Length | ≤45 m |
| Diamond Wire Diameter | ≤0.45 mm |
| Wire Tensioning Method | Adjustable Pneumatic Tensioning |
| Spindle Motion | Reciprocating Rotation |
| Spindle Speed | 2–300 rpm (adjustable) |
| Z-Axis Travel | ≤60 mm |
| Y-Axis Travel | ≤50 mm |
| Sample Stage | Manual 2D Fixture — Horizontal Rotation: 0–360°, Tilt Angle: ±15° |
| Maximum Distance Between Guide Wheels (inner) | 96 mm |
| Max. Workpiece Dimensions | Φ50 × 50 mm |
| Specimen Holder Size (L×W×H) | 80 × 51 × 12 mm |
| Max. Cutting Depth | ≤50 mm |
| Control System | Integrated PLC + 7-inch Touchscreen HMI |
| Real-time Video Monitoring | Built-in 7-inch Display |
| Machine Dimensions (L×W×H) | 730 × 680 × 970 mm |
| Net Weight | 130 kg |
| Operating Environment | 0–45 °C, 10–85% RH (non-condensing) |
| Cooling Requirement | Cutting Oil (recommended) |
| Compressed Air Supply | ≥0.6 MPa |
| Minimum Bench Load Capacity | 150 kg |
| Recommended Bench | Solid Cement Table (800 × 700 × 500 mm) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | STX-203 |
| Power Supply | AC 220 V, 50 Hz, 10 A |
| Total Power Consumption | 120 W (excl. air compressor) |
| Diamond Wire Length | ≤45 m |
| Wire Diameter | ≤0.45 mm |
| Wire Tensioning | Pneumatically adjustable |
| Main Spindle Rotation | Reciprocating |
| Spindle Speed | 2–300 rpm (adjustable) |
| Cutting Feed Rate | 0.05–40 mm/min |
| Return Speed | 1–40 mm/min |
| Z-axis Stroke | ≤60 mm |
| Y-axis Stroke | 0.01–50 mm |
| Rotary Stage | 0–360° horizontal (motorized) |
| Tilt Stage | ±10° (motorized) |
| Maximum Workpiece Size | Φ50 × 50 mm |
| Sample Holder Dimensions | 80 × 51 × 12 mm |
| Max Cutting Depth | ≤50 mm |
| Control System | PLC + 7-inch HMI touchscreen |
| Integrated Video Monitoring | 7-inch display |
| Frame Material | Aluminum alloy with sheet metal enclosure |
| Machine Dimensions (L×W×H) | 730 × 680 × 970 mm |
| Net Weight | 130 kg |
| Operating Environment | 0–45 °C, 10–85% RH (non-condensing) |
| Required Utilities | Compressed air ≥0.6 MPa, cutting oil coolant, grounded AC supply, stable vibration-isolated bench (≥150 kg capacity) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | STX-2401 |
| Instrument Type | Precision Diamond Wire Cutting System |
| Max Sample Diameter | Ø600 mm (24") |
| Max Sample Height | 650 mm |
| Wire Length | ≤270 m |
| Wire Diameter | ≤0.45 mm |
| Wire Speed | 0–8 m/s (adjustable) |
| Z-Axis Stroke | ≤680 mm |
| Y-Axis Stroke | ≤650 mm |
| Y-Axis Positioning Accuracy | 0.01 mm |
| Worktable Size | 700 mm × 700 mm |
| Worktable Load Capacity | 600 kg |
| Worktable Rotation Range | 0–360° |
| Rotation Positioning Accuracy | ±0.1° |
| Cutting Speed | 0.05–30 mm/min |
| Tension Control | Pneumatic (0.1–0.4 MPa adjustable) |
| Guiding Pulley Center Distance Adjustment Range | 900–530 mm |
| Spool Torque Range | 0–2.4 N·m |
| Power Supply | AC 220 V, 50 Hz |
| Total Power Consumption | <4100 W |
| Main Drive Motor | 2 kW servo |
| Motion Axes Motors | Panasonic servo (Y/Z/R) |
| Control System | PLC + 10.1" HMI touchscreen |
| Safety Features | Wire-break auto-stop, emergency stop |
| Operating Environment | Altitude <1000 m, 10–40°C, 45–65% RH |
| Footprint | 2200 mm × 1700 mm × 2600 mm (w/d/h) |
| Net Weight | ~1600 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | STX-4001 |
| Instrument Type | Precision Diamond Wire Saw |
| Cutting Wire Speed | 0–5 m/s (adjustable) |
| Max. Wire Length | ≤400 m |
| Max. Wire Diameter | ≤0.65 mm |
| Z-Axis Travel | ≤1 m |
| Y-Axis Travel | ≤1 m |
| Y-Axis Feed | Manual (micrometer-controlled) |
| Tensioning System | Pneumatic (0–1 MPa adjustable) |
| Max. Workpiece Dimensions | Φ1 m × 1 m |
| Worktable Size | 1200 mm × 1000 mm |
| Worktable Load Capacity | 1.5 t (max) |
| Machine Dimensions (L×W×H) | 2850 × 1850 × 3350 mm |
| Net Weight | ≈2.5 t |
| Power Supply | AC 220 V / 50 Hz |
| Total Power Consumption | ≈6 kW |
| Safety Features | Wire-break auto-stop, wrap-angle protection |
| Control System | PLC + 10.1″ touchscreen HMI |
| Display | Digital real-time feedback |
| Ambient Requirements | Altitude <1000 m |
| Compliance | Designed per IEC 61000-6-2/6-4 EMC standards |