KJ GROUP
Filter
Showing 241–270 of 475 results
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | PCE-3 |
| RF Frequency | 13.56 MHz |
| Maximum RF Power | 18 W (adjustable in three steps: 6.8 W / 10.5 W / 18 W) |
| Chamber Dimensions | Ø75 mm × 165 mm |
| Chamber Material | Heat-resistant borosilicate glass |
| Gas Inlet | Single-channel, compatible with air, O₂, Ar, N₂, or custom gas mixtures |
| Vacuum Requirement | ≥160 L/min pumping speed, ultimate pressure ≤0.27 mbar (200 mtorr) |
| Input Voltage | 110 V / 220 V, 50 Hz / 60 Hz |
| Device Dimensions | 200 mm × 250 mm × 210 mm |
| Net Weight | 8 kg (excluding vacuum pump) |
| Control Mode | Fully automatic microprocessor-based operation |
| Safety Compliance | CE-marked design |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PCE-6 |
| RF Frequency | 3.0 MHz (±1%) |
| Output Power | 7.2 W / 10.2 W / 29.6 W (3-step manual adjustment) |
| Chamber Dimensions | Ø160 mm × 190 mm |
| Chamber Volume | ≈3.8 L |
| Chamber Material | High-purity fused quartz |
| Vacuum Pump | Direct-coupled dual-stage rotary vane pump, 120 L/min |
| Ultimate Vacuum | ≤50 mtorr |
| Gas Inlets | 3 independent mass-flow-controlled ports (6 mm Swagelok® compression fittings) |
| Gas Compatibility | O₂, N₂, Ar, H₂, air, and custom gas mixtures |
| Control Interface | Manual tactile panel with real-time digital display of power, time, and vacuum level |
| Overall Dimensions | 400 mm × 300 mm × 300 mm |
| Net Weight | 10.2 kg |
| Input Power | AC 220 V, 50/60 Hz |
| Total System Power Consumption | <600 W |
| Vacuum Pump Power | <500 W |
| Sealing | Aluminum folding flange with Ø45 mm quartz viewport |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PCE-6V |
| Instrument Type | Domestic RF Plasma Cleaner |
| RF Frequency | 13.56 MHz |
| RF Power Output | 100 W |
| Total System Power Consumption | <500 W (including vacuum pump) |
| Chamber Dimensions | Ø165 mm × 55 mm |
| Chamber Material | Fused Quartz |
| Vacuum Interface | Ø12 mm |
| Ultimate Vacuum | 0.1 Pa |
| Operating Vacuum Range | 60–500 Pa |
| Gas Inlets | 2 channels (optional flow controllers) |
| Electrode Diameter | Ø120 mm |
| Sample Stage | Ø150 mm (effective Ø140 mm) |
| Stage-to-Electrode Gap | Adjustable from 15 to 50 mm |
| Optional Heated Stage | Ø100 mm, 200–500 °C |
| Cooling Water Pressure Requirement | 0.2–0.4 kPa |
| Ambient Operating Conditions | 5–35 °C, RH <80% non-condensing, altitude ≤2000 m |
| Dimensions (W×D×H) | 245 mm × 235 mm × 460 mm |
| Weight | 20 kg (excluding vacuum pump) |
| Brand | KJ GROUP |
|---|---|
| Model | PCE-8 |
| Type | Benchtop RF Plasma Surface Treater |
| RF Frequency | 13.56 MHz |
| Max RF Power | 100 W (continuously adjustable) |
| Plasma Chamber | High-purity quartz tube, Ø8.2" ID × 12" L (Ø208 mm × 305 mm), aluminum folding flange with Ø60 mm viewport |
| Ultimate Vacuum | 50 mtorr |
| Pumping System | Direct-coupled dual-stage rotary vane pump (240 L/min) |
| Gas Compatibility | N₂, O₂, Ar, H₂, air, and custom gas mixtures |
| Mass Flow Control | 0–500 sccm (digital MFC integrated) |
| Control Interface | 6" color touchscreen (power, time, gas flow, pump activation) |
| Dimensions (W×D×H) | 620 × 450 × 600 mm |
| Total Power Consumption | <600 W |
| Input Voltage | AC 220 V |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PECVD-300 |
| Vacuum Chamber Dimensions | Φ300 mm × 300 mm |
| Base Pressure (after bake-out) | ≤8.0×10⁻⁵ Pa |
| Ultimate Leak Rate | ≤5.0×10⁻⁷ Pa·L/s |
| Process Pressure Range | 13.3–133 Pa |
| RF Power Supply | 13.56 MHz, 0–300 W, auto-matching |
| Electrode Gap Adjustment | 15–50 mm (graduated scale) |
| Substrate Heating | up to 500 °C, ±1 °C stability |
| Showerhead Diameter | Φ90 mm |
| Gas Inlets | 2 standard MFC channels (100 sccm each) |
| Cooling Water Requirements | 0.2–0.4 MPa pressure, 15–25 °C inlet temperature |
| Total Power Consumption | <4 kW |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PG150-PC |
| Price | Upon Request |
| Measurement Principle | Fizeau Interferometry |
| Effective Aperture | 150 mm |
| Light Source | Semiconductor Laser, 635 nm |
| Magnification | Fixed |
| Display Interface | PC Software or Dedicated Monitor |
| Reference Flat Accuracy | PV ≤ λ/20 |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Dimensions (W × D × H) | 40 cm × 40 cm × 90 cm |
| Weight | 75 kg |
| Reference Flat Material | Fused Silica (Corning 7980) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | PM200 |
| Pricing | Available Upon Request |
| Sample Diameter | φ3 mm |
| Foil Thickness Range | 50–120 µm |
| Rated Punch Cycles | ≥20,000 |
| Punch Clearance | 1.5 mm |
| Dimensions | 100 × 100 × 120 mm |
| Weight | 1 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pouch Cell Laboratory Research System |
| Pricing | Available Upon Request |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-6P |
| Pricing | Upon Request |
| Certification | CE Certified |
| Power Supply | AC 220 V, 50 Hz, 100 W |
| Operating Environment | Altitude < 1000 m, Temperature 10–40 °C, Relative Humidity 45–65 % RH |
| Dimensions (W×D×H) | 260 × 340 × 420 mm |
| Weight | 15 kg |
| Sample Holder Dimensions | 75 × 25 × 2 mm |
| Immersion Length | 60 mm |
| Travel Stroke | 1–80 mm |
| Dip Speed (Auto) | 1–400 mm/min |
| Dip Speed (Manual) | 1–150 mm/min |
| Immersion/Drying Time Range | 1–999 s |
| Dip Cycles | 1–45 |
| Stirring | Independent on/off control per station, dual-speed (low/high) |
| Dip Vessel Capacity | 150 mL × 6 |
| Footprint Requirement | ≥ 500 × 800 mm, Load Capacity ≥ 50 kg |
| Grounding | Mandatory |
| Ventilation | Not required |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-6PB |
| Certification | CE-compliant |
| Power Supply | AC 220 V, 50 Hz, 1200 W |
| Dimensions (W×D×H) | 260 × 340 × 420 mm |
| Weight | 15 kg |
| Sample Holder Dimensions | 75 × 25 × 2 mm |
| Effective Immersion Length | 60 mm |
| Load Cup Capacity | 150 mL (6 units) |
| Heating Range | RT–100 °C (independently controllable per station) |
| Dip Speed | 1–400 mm/min (auto), 1–150 mm/min (manual) |
| Withdrawal Cycles | 1–45 |
| Immersion/Drying Time | 1–999 s |
| Stroke Adjustment | 1–80 mm |
| Stirring Speed | 1–5 rpm (per station, individually switchable) |
| Ambient Operating Conditions | Altitude ≤1000 m, Temperature 10–40 °C, Humidity 45–65 %RH |
| Footprint Requirement | ≥500 × 800 mm, Load Capacity ≥50 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-AADC |
| Quotation | Upon Request |
| Drive Motor | Servo motor |
| Drive Mechanism | Precision lead screw |
| Immersion Time | 0–99 s/min/hour (user-selectable) |
| Cycle Count | 1–999 |
| Input Power | 208–240 VAC, 50/60 Hz |
| Power Consumption | ≤800 W |
| Max. Withdrawal Stroke | 75 mm |
| Control Interface | LED touchscreen with 5 programmable coating profiles |
| Communication | RS232 port on control panel |
| Optional Software | Windows 8–compatible PC-based control software |
| Dimensions (W×D×H) | 570 × 300 × 475 mm |
| Net Weight | 23 kg |
| Standard Accessories | Sample holders (4), 150 mL glass beakers (4) |
| Certification | CE compliant |
| Warranty | 12 months parts & labor, lifetime technical support |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-HT |
| Heating Temperature Range | RT–1000 °C (furnace), RT–800 °C (standard operation with included dip rods) |
| Max. Pulling Speed | 200 mm/min |
| Min. Pulling Speed | 1 mm/min |
| Immersion & Drying Time Setting | 1–999 s |
| Effective Immersion Length | 60 mm |
| Sample Load Capacity | ≤1 kg |
| Furnace Tube Dimensions | Φ50 × 610 mm (ID: Φ45 mm) |
| 炉膛尺寸 | Φ80 × 330 mm |
| Temperature Control Accuracy | ±1 °C |
| Power Supply | AC 220 V, 50 Hz, 50 A |
| Total Power Consumption | 1.6 kW |
| Ambient Operating Conditions | Altitude <1000 m |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM01 |
| Price | Upon Request |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 50 W |
| Withdrawal Speed Range | 1–200 mm/min |
| Effective Immersion Length | 60 mm |
| Immersion & Drying Time Setting | 1–999 s |
| Programmable Coating Cycles | 1–20 |
| Sample Dimensions (Standard) | 75 mm × 25 mm × 2.5 mm |
| Unit Dimensions | 320 mm × 260 mm × 560 mm |
| Net Weight | 18 kg |
| Operating Altitude | ≤1000 m |
| Ambient Temperature Range | 25 °C ±15 °C |
| Relative Humidity | 55 %RH ±10 %RH |
| Motor Type | High-Precision Stepper Motor |
| Vibration Mitigation | Suspended Motor Mounting |
| Optional Accessories | Rapid-Release Sample Clamp, Additional Withdrawal Wires |
| Standard Accessories | Anti-Oscillation Guide Base, Sample Holder Set, Coating Beaker (1 pc), Withdrawal Wires (3 pcs) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM02 |
| Price | Upon Request |
| Touchscreen Interface | 7-inch Color TFT LCD |
| CE Certified | Yes |
| Control System | Industrial PLC |
| Drive Motor | High-Precision Stepper Motor with Suspended Mounting for Vibration Damping |
| Power Supply | AC 220 V, 50 Hz, Grounded |
| Rated Power | 50 W |
| Operating Environment | Altitude < 1000 m |
| Dimensions (W×D×H) | 320 × 260 × 560 mm |
| Net Weight | 17 kg |
| Sample Holder Dimensions | 75 × 25 × 2.5 mm |
| Immersion Length | 60 mm |
| Withdrawal Speed Range | 1–200 mm/min (adjustable in 0.1 mm/min increments) |
| Immersion/Drying Time Range | 1–999 s (programmable per cycle) |
| Number of Cycles | 1–20 (fully programmable sequence) |
| Standard Accessories | (1) Sample Clamp Set, (2) Coating Beaker (100 mL), (3) Three Stainless-Steel Withdrawal Wires |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM02-200 |
| Power Supply | AC 220 V, 50 Hz |
| Speed Range | 1–200 mm/min |
| Stroke | 270 mm |
| Max Sample Dimensions | 310 × 260 × 5 mm |
| Load Capacity | ≤5.5 kg |
| Immersion/Drying Time Setting | 1–999 s |
| Cycle Count | 1–20 cycles |
| Motor | Two-phase hybrid stepper motor with microstepping driver |
| Certifications | CE compliant |
| Footprint | 455 × 330 × 890 mm (L×W×H) |
| Working Table Requirement | ≥800 × 600 × 700 mm, ≥200 kg load capacity |
| Environmental Operating Range | Altitude <1000 m, Temperature 10–40 °C, Relative Humidity 45–65 % RH |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM02-500 |
| Power Supply | AC 220 V (50 Hz) / 110 V (60 Hz) |
| Lifting Speed Range | 1–500 mm/min (integer steps) |
| Maximum Load Capacity | ≤100 g |
| Substrate Dimensions (L×W×T) | 75 × 25 × 2.5 mm |
| Effective Immersion Length | 60 mm |
| Immersion & Drying Time Setting Range | 1–999 s |
| Operating Environment | Altitude <1000 m, Temperature 10–40 °C, Relative Humidity 45–65 % RH |
| Footprint Requirement | 800 × 600 × 700 mm, Load Capacity ≥200 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM02-8P |
| Power Supply | AC 220 V, 50 Hz |
| X-axis Speed Range | 500–5000 mm/min |
| Z-axis Speed Range | 1–200 mm/min |
| Effective Immersion Length | 65 mm |
| Sample Dimensions (per substrate) | 75 × 25 × 2.5 mm |
| Max Simultaneous Substrates | 5 |
| Substrate Positions per Batch | 8 |
| Immersion & Drying Time Range | 1–999 s |
| Cycle Count Range | 1–999 |
| Operating Ambient | ≤1000 m altitude, 10–40 °C, 45–65 %RH |
| Footprint | 900 × 520 × 540 mm |
| Weight | 20 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MMB01 |
| Pricing | Upon Request |
| Power Supply | AC 220 V, 50 Hz, 850 W |
| Lifting Speed Range | 1–200 mm/min |
| Temperature Control Range | RT + 5 °C to 100 °C |
| Temperature Stability | ±1.5 °C |
| Effective Immersion Length | 60 mm |
| Immersion & Drying Time Setting | 1–999 s |
| Programmable Dip Cycles | 1–20 |
| Sample Dimensions Supported | 75 mm × 25 mm × 2.5 mm |
| Footprint | 450 mm × 500 mm × 970 mm |
| Dry Box External Dimensions | 460 mm × 510 mm × 695 mm |
| Working Table Requirement | ≥800 mm × 600 mm × 700 mm, Load Capacity ≥200 kg |
| Environmental Operating Conditions | Altitude ≤1000 m, Ambient Temperature 25 °C ±15 °C, Relative Humidity 55 %RH ±10 %RH |
| Motor Type | High-Precision Stepper Motor with Suspended Mounting for Vibration Damping |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MMB02 |
| Pricing | Upon Request |
| Dip Speed | 1–200 mm/min |
| Temperature Range (Coating Chamber) | RT to 100 °C |
| Temperature Stability | ±1.5 °C |
| Effective Immersion Length | 60 mm |
| Immersion/Drying Time Setting | 1–999 s |
| Cycle Count | 1–20 cycles |
| Sample Dimensions | 75 mm × 25 mm × 2.5 mm |
| 恒温箱尺寸 | 460 mm × 510 mm × 695 mm |
| Overall Unit Dimensions | 450 mm × 500 mm × 970 mm |
| Power Supply | AC 220 V, 50 Hz, Grounded |
| Ambient Operating Conditions | Altitude ≤1000 m, Ambient Temp. 25 °C ±15 °C, RH 55% ±10% |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MMB02-200 |
| Price | Upon Request |
| Power Supply | 220 V, 50 Hz |
| Heating Power | 2.3 kW |
| Withdrawal Speed Range | 1–200 mm/min |
| Stroke Length | 250 mm |
| Temperature Range | 80–200 °C |
| Temperature Accuracy | ±1.5 °C |
| Fuse Rating | 15 A |
| Sample Dimensions | 407 mm × 229 mm × (1–10) mm |
| Maximum Load Capacity | ≤5 kg |
| Overall Dimensions | 636 mm × 680 mm × 1520 mm |
| Standard Accessories | 1 control unit, 1 immersion bath |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-NMB |
| Price | Upon Request |
| Power Supply | AC 220 V, 50 Hz, 850 W |
| Dip Speed Range | 1–500 nm/s |
| Effective Immersion Length | 60 mm |
| Immersion/Drying Time Setting | 1–999 s |
| Cycles per Run | 1–20 |
| Temperature Control Range (Chamber) | RT+5°C to 100°C |
| Temperature Stability | ±1.5°C |
| Sample Holder Dimensions | 75 × 25 × 2.5 mm |
| Chamber External Dimensions | 460 × 510 × 695 mm |
| Overall Instrument Dimensions | 450 × 500 × 970 mm |
| Weight Capacity of Workbench | ≥200 kg |
| Required Bench Footprint | 800 × 600 × 700 mm |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | PTL-OV5P |
| Power Supply | AC 220 V, 50 Hz, 3 A, 850 W |
| Pulling Speed Range | 1–200 mm/min |
| Temperature Control Range (Chamber) | RT+5°C to 100°C |
| Temperature Uniformity | ±1.5°C |
| Sample Dimensions | 75 mm × 25 mm × 2.5 mm |
| Immersion Length | 60 mm |
| Vial Capacity | Φ60 mm, 150 mL |
| Dwell Time per Station | 1–999 s |
| Coating Cycles per Station | 1–20 |
| Number of Stations | 5 |
| Chamber Dimensions | 460 mm × 510 mm × 695 mm |
| Overall Dimensions | 450 mm × 500 mm × 1060 mm |
| Weight | 45 kg |
| Compliance | CE-certified |
| Operating Environment | 5–40°C, ≤85% RH, altitude <1000 m, no strong vibration or corrosive gases |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-OV6P |
| Pricing | Upon Request |
| Certifications | CE Certified |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 800 W |
| Withdrawal Speed Range | 1–200 mm/min |
| Temperature Control Range (Chamber) | RT + 5 °C to 100 °C |
| Temperature Uniformity | ±1.5 °C |
| Sample Dimensions (Max) | 75 mm × 25 mm × 2.5 mm |
| Immersion Length | 60 mm |
| Immersion & Drying Time Setting Range | 1–999 s |
| Number of Coating Cycles | 1–20 |
| Sample Capacity | 6 positions |
| Vial Specifications | Φ60 mm, 150 mL |
| Chamber External Dimensions | 460 mm × 510 mm × 695 mm |
| System Dimensions | 450 mm × 500 mm × 1060 mm |
| Net Weight | 40 kg |
| Required Workbench | 800 mm × 600 mm × 700 mm, ≥200 kg load capacity |
| Operating Environment | Altitude <1000 m, Ambient Temp. 25 °C ±15 °C, RH 55 % ±10 % |
| Grounding | Mandatory |
| Compressed Air / Water / Ventilation | Not Required |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-UMB |
| Price | Upon Request |
| Certifications | CE compliant |
| Power Supply | AC 220 V, 50 Hz, grounded |
| Operating Environment | Altitude < 1000 m |
| Dimensions (W×D×H) | 460 mm × 510 mm × 970 mm |
| Effective Immersion Length | 60 mm |
| Substrate Dimensions Supported | 75 mm × 25 mm × 2.5 mm |
| Withdrawal Speed Range | 1–500 µm/s |
| Temperature Control Range (Chamber) | RT + 5 to 100 °C |
| Temperature Uniformity | ±1.5 °C |
| Immersion/Drying Time Setting | 1–999 s |
| Cycle Count | 1–20 cycles |
| Control Interface | Color TFT touchscreen with PLC-based logic |
| Drive Mechanism | High-resolution stepper motor with suspended motor mount for vibration isolation |
| Standard Accessories | 1× substrate holder set, 1× liquid reservoir cup, 3× withdrawal wires |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | PTL-UMB01 |
| Pricing | Upon Request |
| Power Supply | AC 220 V, 50 Hz |
| Max. Sample Size | 200 × 150 × 5 mm |
| Travel Range | 220 mm |
| Dip Speed Range | 1–8000 µm/s (Resolution: 1 µm) |
| Temperature Control | RT–50 °C |
| Immersion/Drying Time | 1–999 s |
| Cycles | 1–20 |
| Load Capacity | ≤1000 g |
| Dimensions (W×D×H) | 480 × 480 × 880 mm |
| Weight | 60 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | QS-Series Microwave Atmosphere Experimental Furnace |
| Pricing | Upon Request |
| Voltage | 220±10 V, 50 Hz, Three-Phase |
| Rated Power | 4 kW (QS1512) / 6 kW (QS1516) |
| Microwave Output Power | 0.01–1.40 kW (Continuously Adjustable) |
| Microwave Frequency | 2.45 GHz |
| Max Operating Temperature | ≤1200 °C (QS1512) / ≤1600 °C (QS1516) |
| Heating Chamber Dimensions | 140×140×70 mm (QS1512) / 110×110×70 mm (QS1516) |
| Temperature Measurement | Type S or K Thermocouple |
| Temp Range & Accuracy | 0–1300 °C ±0.1% RDG (QS1512) / 0–1600 °C ±0.1% RDG (QS1516) |
| Static Ultimate Vacuum | ≤100 Pa |
| Atmosphere Control | Dual-channel gas inlet with rapid pre-vacuum capability |
| Control System | Mitsubishi PLC + Schneider HMI touchscreen |
| Programmable Stages | 40-segment ramp-soak profiles with data logging, export (CSV), real-time curve display, and dynamic screen-saver mode |
| Microwave Leakage | <0.05 mW/cm² |
| Safety Interlocks | Door-closed sensing switch, overtemperature protection, overcurrent protection, magnetron thermal cutoff |
| Cooling | External recirculating chiller (2 m³/h flow rate, 1.6 kW cooling capacity) |
| Overall Dimensions | 1150×850×800 mm (L×W×H) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | QY-30 |
| Pricing | Upon Request |
| Input Voltage | AC 220 V, 50 Hz |
| Drive Power | 120 W |
| Spindle Speed Range | 70–2750 rpm |
| Z-Axis Travel | 100 mm (stepper motor-driven) |
| X/Y-Axis Travel | 200 mm × 80 mm (manual) |
| Quick Clamp Holding Force | 27 kgf |
| Sample Stage Dimensions | 300 mm × 100 mm × 10 mm |
| Stage Insert Plate | 180 mm × 75 mm × 5 mm |
| Standard Core Bit Internal Diameter | Ø30 mm |
| Overall Dimensions | 580 mm × 445 mm × 620 mm |
| Ambient Operating Conditions | ≤1000 m altitude, 10–40 °C, 45–65 %RH |
| Cooling | Integrated water circulation tray with inlet/outlet ports |
| Ventilation | Required |
| Compliance | Designed for ISO/IEC 17025-aligned lab environments |
| Brand | KJ GROUP |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | RC-Ti-100 |
| Pricing | Upon Request |
| Material | 99.95% Pure Titanium (Grade 2) |
| Outer Diameter | 55 mm |
| Inner Diameter | 45 mm |
| Height | 75 mm |
| Internal Volume | 100 mL |
| Operating Temperature Range | Ambient to 400 °C |
| Maximum Working Pressure | 4 MPa |
| Valve | 1/4″ Stainless Steel Needle Valve |
| Optional Accessories | 1/4″ Dual-Ferrule External Thread Fitting |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | RF-100-LD |
| Input Voltage | AC 110–240 V, 50/60 Hz |
| Output Power Range | 5–100 W (adjustable), stability ±1% |
| RF Frequency | 13.56 MHz, stability ±0.005% |
| Matching Method | Manual impedance matching |
| Cooling | Air-cooled |
| Noise Level | <50 dB(A) |
| Dimensions | 390 × 260 × 105 mm |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | RF-300I-LD |
| Input Voltage | AC 110–240 V, 50/60 Hz |
| Output Power Range | 5–300 W (adjustable, ±1% stability) |
| RF Frequency | 13.56 MHz (±0.005% stability) |
| Matching Method | Automatic impedance matching via air-variable capacitor |
| Cooling | Forced-air cooling |
| Noise Level | <50 dB(A) |
| Dimensions | 480 × 400 × 140 mm |