KJ GROUP
Filter
Showing 181–210 of 475 results
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | MSK-NFES-3C |
| Power Supply | 220 V, 50 Hz, 1100 W |
| High-Voltage Output | 0–30 kV |
| Temperature Control Range | RT to 50 °C |
| Syringe Pump Flow Rate | 0.0001–1 mm/s |
| Max Syringe Diameter | Ø30 mm |
| Standard Syringe Volume | 20 mL |
| Plunger Stroke Range | 0.01–90 mm |
| Collector Drum Speed | 400–3800 rpm (100 rpm increments) |
| Oscillation Speed | 5–100 mm/s (5 mm/s increments) |
| Oscillation Range | 100–200 mm |
| Drum Dimensions | Ø80 × 200 mm |
| Optional Collector Platform | Manual X/Y (1–10 mm/s), Auto X/Y (1–20 mm/s / 1–10 mm/s), Max Sample Size: 180 × 180 mm, Layer Spacing: 0.1–100 mm |
| Overall Dimensions | 700 × 600 × 900 mm (L×W×H) |
| Total Mass | 75 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Manufacturer |
| Model | MSK-NFES-3C-DZ01 |
| Input Voltage | 220 V AC, 50 Hz |
| Positive High Voltage Output | +30 kV |
| Negative High Voltage Output | −30 kV |
| Heating Range | RT to 50 °C (Infrared Lamp, 1600 W) |
| Dehumidification Capacity | 420 W (Humidity Control Range: 10–60 %RH) |
| Total System Power | 5194 W (Conjugate Collector: 3352 W |
| Drum Collector | 1842 W) |
| Syringe Pump Feed Rate | 0.001–20 mm/min |
| Syringe Volume Compatibility | 10–50 mL (Standard: 20 mL) |
| Syringe Plunger Stroke Range | 0.01–90 mm |
| Drum Collector Speed | 500–3800 rpm (Increment: 100 rpm) |
| Drum Oscillation Speed | 5–100 mm/s (Increment: 5 mm/s) |
| Oscillation Amplitude | 100–200 mm |
| Drum Dimensions | Ø80 × 200 mm |
| Conjugate Collector Needle-to-Collector Distance | 20–60 cm |
| Conjugate Axis Rotation Speed | 500–3000 rpm |
| Rod Collector Speed | 1–500 rpm |
| Vertical Travel Range (Conjugate Stage) | 180 mm (Speed: 0.1–5 mm/s) |
| Overall Dimensions | 1100 × 1100 × 1200 mm |
| Net Weight | 100 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | China |
| Manufacturer Type | Authorized Distributor |
| Equipment Category | Imported Lab Equipment |
| Model | MSK-NFES-4 |
| Power Input | AC 208–240 V, 50 Hz |
| High-Voltage Output | 0–30 kV, max. 0.5 mA |
| Temperature Control Range | Ambient to 60 °C |
| Rotational Speed Range (Drum Collector) | 300–4000 rpm, stability ±1% |
| Collector Options | 6-diameter drum (Ø2–100 mm), fixed stainless steel plate (320 × 100 × 2 mm), programmable XY-stage (300 × 200 × 5 mm) |
| Syringe Capacity | 2.5–60 mL (glass only) |
| Enclosure Dimensions | 1200 × 800 × 1900 mm (W × D × H) |
| Total Weight | 590 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SFM-10 |
| Voltage | AC 208–240 V, 50/60 Hz |
| Total Power | 1.8 kW |
| Mixing Canister | Ø180 mm × 150 mm (Design Volume: 3 L |
| Effective Volume | 2 L) with Circulating Water Jacket |
| Dispersion Disc | Ø45 mm |
| Orbital Speed | 0–70 rpm |
| Stirring Speed | 0–112 rpm |
| Dispersion Speed | 0–3800 rpm |
| Dispersion Tip Linear Velocity | 0–9.42 m/s |
| Lift Motor Power | 370 W |
| Dimensions (W×D×H) | 960 × 890 × 1250 mm |
| Weight | 350 kg |
| Certifications | CE |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SFM-12M |
| Power Supply | 208–240 V AC, 50 Hz |
| Speed Range | 2700–4000 rpm |
| Timer Range | 3–180 s |
| Sample Vial Capacity | 2 mL (screw-cap microtube) |
| Dimensions (W×D×H) | 170 × 210 × 135 mm |
| Weight | 2.2 kg |
| Standard Zirconia Beads | Ø0.1, Ø0.5, Ø1.0, Ø1.5, Ø3.0 mm (10 pcs each) |
| Sample Throughput | Up to 3 vials simultaneously |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | MSK-SFM-13S |
| Instrument Type | Planetary Ball Mill |
| Sample Applicability | Hard and brittle materials |
| Feed Size | <10 mm (brittle), <3 mm (other materials) |
| Output Particle Size | Wet grinding: avg. particle size <1 µm |
| Dry grinding | avg. particle size <20 µm |
| Batch Capacity | 160 mL |
| Operating Voltage | 208–240 V AC, single-phase, 50/60 Hz |
| Power Consumption | ≤550 W |
| Revolution Speed | 50–400 rpm (adjustable) |
| Rotation Speed | 100–800 rpm (adjustable) |
| Speed Ratio | Revolution : Rotation = 1 : 2 |
| Programmable Stages | 10 stored programs |
| Speed Control | 5-step digital speed regulation |
| Direction Control | Clockwise / Counterclockwise selectable |
| Dimensions (L×W×H) | 500 × 350 × 330 mm |
| Net Weight | 60 kg |
| Transport Dimensions | 762 × 711 × 660 mm (30″ × 28″ × 26″) |
| Shipping Weight | 90 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SFM-14 |
| Power Supply | AC 220 V, 50/60 Hz, 400 W |
| Rotation Mode | Programmable continuous bidirectional rotation (CW/CCW) |
| Speed Range | 60–600 rpm |
| Timer Range | 1–9999 min |
| Maximum Load Capacity | 25 kg |
| Max. Compatible Jar Dimensions | Ø250 mm × 175 mm |
| Standard Jar Dimensions | Ø130 mm × 162 mm |
| Jar Materials | Ceramic, Alumina, Stainless Steel, Polyurethane, Nylon |
| Grinding Media Compatibility | Alumina, Zirconia, Agate, Chrome Steel, Stainless Steel |
| Overall Dimensions | 730 mm × 415 mm × 250 mm |
| Net Weight | 60 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SFM-14 |
| Price | Upon Request |
| Power Supply | AC 220 V, 50/60 Hz, 400 W |
| Rotation Mode | Programmable continuous bidirectional rotation (CW/CCW) |
| Speed Range | 60–600 rpm (digital display) |
| Timer Range | 1–9999 minutes |
| Maximum Load Capacity | 25 kg |
| Max. Compatible Jar Dimensions | Ø250 mm × 175 mm |
| Standard Stainless Steel Jar | Ø130 mm × 162 mm |
| Jar Material Options | Ceramic, Alumina, Zirconia, Stainless Steel, Polyurethane, Nylon |
| Grinding Media Compatibility | Alumina, Zirconia, Agate, Chrome Steel, Stainless Steel |
| Overall Dimensions (L×W×H) | 730 × 415 × 250 mm |
| Net Weight | 60 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SFM-3LN |
| Pricing | Available Upon Request |
| Vessel Capacity | 3 L |
| Temperature Range | −180 °C (achievable with LN₂) |
| Stirring Speed | 0–1200 rpm |
| Final Particle Size | ≤1 µm |
| Power Supply | 220 V AC, 1250 W |
| Dimensions (L×W×H) | 700 × 600 × 1100 mm |
| Weight | 90 kg |
| Vessel Material | 304 Stainless Steel |
| Vacuum Jacket | KF25 Flange + Needle Valve |
| Temperature Sensing | Internal Thermocouple |
| Grinding Media | Zirconia Beads |
| Max Sample Size | 20 mm |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SFM-7 |
| Voltage | AC 220 V ±10% |
| Power | 150 W |
| Mixing Vessel Options | 150 mL stainless steel jar, 550 mL aluminum jar |
| Oscillation Mode | Continuously adjustable speed |
| Maximum Rotation Speed | 320 rpm |
| Timer Range | 0–99 minutes |
| Vacuum Level | −0.08 to −0.09 MPa (absolute) |
| Dimensions (W × D × H) | 330 mm × 310 mm × 510 mm |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | MSK-SFM-9 |
| Pricing | Upon Request |
| Voltage | AC 208–240 V, 50/60 Hz |
| Total Power | 4 kW |
| Mixing Vessel | Ø240 mm × 180 mm (5 L), 304 stainless steel with circulating water jacket |
| Stirring Blade Clearance | 2–4 mm from bottom, 2–5 mm from wall, 3–8 mm between blades |
| Orbital Speed | 0–70 rpm |
| Stirring Speed | 0–112 rpm |
| Dispersion Speed | 0–6100 rpm |
| Lift Motor Power | 370 W |
| Dimensions (W×D×H) | 1000 × 800 × 1930 mm |
| Weight | 300 kg |
| Certifications | CE-compliant |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SFM-ALO |
| Price | Upon Request |
| Power Supply | 220 V, 50 Hz |
| Motor Power | 550 W |
| Crushing Speed | 500 rpm |
| Max Feed Size | 5–20 mm |
| Adjustable Jaw Gap Range | 0.01–5.00 mm (digital micrometer display, 0.01 mm resolution) |
| Feed Opening | 92 × 38 mm |
| Max Single Feed Capacity | 200 g |
| Output Particle Size | 0.5–2 mm (material-dependent) |
| Drawer Load Capacity | 200 g |
| Dimensions (Operational) | 400 × 640 × 870 mm (L×W×H) |
| Dimensions (Closed) | 400 × 600 × 500 mm (L×W×H) |
| Net Weight | ~59 kg |
| Jaw Liner Material | High-purity alumina ceramic (99.5% Al₂O₃) |
| Max Material Hardness Tolerance | <8 HRC |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SFM-DS |
| Power Supply | 208–240 V AC, 50 Hz, 180 W motor (300 W transformer required for 110 V operation) |
| Grinding Time Range | 0–5 min (adjustable) |
| Net Weight | 25 kg |
| Shipping Weight | 43 kg |
| Chamber Volume | 100 mL (max. sample mass: ~50 g) |
| Grinding Vessel Dimensions | Ø115 mm × 35 mm H |
| Max. Sample Size | Ø < 20 mm, H < 35 mm |
| Max. Sample Mohs Hardness | < 8 |
| Output Particle Size | 80–200 mesh (achieved with optional KJ GROUP 3-inch sieves: No. 200 & No. 450) |
| Overall Dimensions | 250 × 250 × 330 mm (L × W × H) |
| Safety | Interlocked lid switch (power cutoff upon lid opening) |
| Mounting | Four threaded base feet for floor or benchtop anchoring |
| Certification | CE-compliant |
| Warranty | 12 months standard, lifetime technical support |
| Material | Manganese steel grinding disc and chamber |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SFM-HT16 |
| Price | Upon Request |
| Motor | 24 VDC |
| Speed Range | 10–70 rpm |
| Tilt Angle Adjustment | 0–90° |
| Timer Range | 1–1199 min |
| Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80% RH |
| Input Voltage | 100–240 VAC, 50/60 Hz |
| Power Consumption | 40 W |
| Dimensions (D×W×H) | 220×510×260 mm |
| Weight | 8 kg |
| Sample Capacity | 16 positions × 50 mL max per vial |
| Display | Dual-line LCD (speed + time) |
| Operation Modes | Timed or Continuous |
| Compatibility | Glovebox-ready (Ar-compatible) |
| Standard Fixtures | 8× 50 mL centrifuge tube holders |
| Optional Fixtures | 60× 1.5 mL, 16× 15 mL centrifuge tube holders |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SP-04-LD |
| Pricing | Upon Request |
| Input Power | 208–240 V AC, 50/60 Hz |
| Stepper Motor Supply | 24 V DC |
| Ultrasonic Nebulizer | 40 kHz, 130 W |
| Reservoir Volumes | 50 mL & 250 mL |
| Flow Rate | 1–20 mL/s |
| Droplet Size | ~50 µm |
| X-Y Translation Range | 200 mm (X), 200 mm (Y) |
| Translation Speed | X-axis 10–800 mm/s, Y-axis 1–12 mm/s |
| Substrate Stage | 150 mm × 150 mm |
| Max Substrate Temperature | 500 °C |
| Temperature Control | Digital PID controller with 7-segment ramp-soak program |
| Dimensions (W×D×H) | 840 × 920 × 1400 mm |
| Operating Altitude | ≤1000 m |
| Ambient Temp. | 25 °C ±15 °C |
| Relative Humidity | 55 %RH ±10 %RH |
| Grounding | Mandatory |
| Ventilation | Required |
| Footprint | ≥1 m² |
| Compressed Air | Required for Y-axis actuation |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-TH-04FA |
| Price | Upon Request |
| Input Power | AC 208–240 V, Single Phase |
| Syringe Pump Flow Rate | 1–10 mL/min |
| Syringe Capacity | 50 mL or 250 mL |
| Substrate Heater Plate | 150 mm × 150 mm, Max 500 °C |
| XY Stage Travel | X: 100 mm, Y: 100 mm |
| XY Speed | X: 5–20 mm/s, Y: 2–12 mm/s |
| Nozzle | Compressed Air Atomizer |
| Integrated Air Compressor | Yes |
| Control Interface | RS232 (Heater), USB/Serial (Pump & Stage) |
| CE Certified | Yes |
| Software | Pre-installed on Included Laptop |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-USP-04C |
| Price | Upon Request |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power | 100 W |
| X/Y Travel Range | 1–200 mm |
| X-Axis Speed | 10–800 mm/s |
| Y-Axis Speed | 10–100 mm/s |
| Droplet Size | 10–20 µm |
| Flow Rate | 0.6 pL/min – 4 mL/min |
| Max Substrate Temperature | 500 °C |
| Heater Platform Dimensions | 350 mm × 220 mm |
| Z-Axis Adjustment Range | 0–60 mm |
| Syringe Capacity | 20 mL |
| Syringe Diameter Limit | ≤ Ø30 mm |
| Syringe Drive Speed | 0.1–45 mm/min (fine adjustment: 0.01–8 mm/min) |
| Syringe Stroke Range | 0.001–120 mm |
| Max Solid Content | ≤ 10 wt% |
| Max Viscosity | ≤ 100 cP |
| Nozzle-to-Substrate Distance | 1–100 mm |
| Footprint | ≥ 2 m² |
| Operating Altitude | ≤ 1000 m |
| Ambient Temp | 25 °C ± 15 °C |
| Relative Humidity | 55 %RH ± 10 %RH |
| Power Supply | AC 220 V, 50/60 Hz, Grounded |
| Pneumatic Requirement | Compressed Air or Gas Cylinder with Regulator |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-USP-04C |
| Power Supply | AC 220 V, 50/60 Hz |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power | 100 W |
| X/Y Travel Range | 1–200 mm |
| X-Axis Speed | 10–800 mm/s |
| Y-Axis Speed | 10–100 mm/s |
| Droplet Size | 10–20 µm |
| Flow Rate | 0.6 nL/min–4 mL/min |
| Max Substrate Temperature | 500 °C |
| Hotplate Dimensions | 350 mm × 220 mm |
| Z-Axis Adjustment Range | 0–60 mm |
| Syringe Capacity | 20 mL |
| Syringe Diameter Limit | ≤ Ø30 mm |
| Syringe Drive Speed | 0.1–45 mm/min (fine adjustment: 0.01–8 mm/min) |
| Syringe Stroke Range | 0.001–120 mm |
| Coating Gap (Nozzle-to-Substrate) | 1–100 mm |
| Max. Solid Content | ≤ 10 wt% |
| Max. Solution Viscosity | ≤ 100 cP |
| Footprint | 1550 mm × 750 mm × 750 mm (main unit) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-VA53 |
| Pricing | Upon Request |
| Chamber Volume | 53 L |
| Construction Material | 304 Stainless Steel + Explosion-Resistant Tempered Glass |
| Operating Temperature | Ambient (20–25 °C) |
| Ultimate Vacuum | < 1000 Pa (7.5 mTorr) |
| Pressure Control Setpoint | 11.6 kPa (87 Torr) |
| Vacuum Pump | Integrated Dual-Stage Rotary Vane Pump, 226 L/min Pumping Speed |
| Control System | PLC-Based with 6" Touchscreen HMI |
| Power Supply | 110/220 VAC, 50/60 Hz |
| Certification | CE Compliant |
| External Dimensions | 710 × 560 × 550 mm |
| Internal Chamber Dimensions | 415 × 345 × 370 mm |
| Warranty | 12 Months (Parts & Labor), Lifetime Technical Support |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSM-250/250A |
| Capacity (as steel) | 0.25 kg |
| Tilt Capability | Yes (for ingot casting) |
| Pressure Rise Rate | 0.133 Pa/min |
| Ultimate Vacuum | 6×10⁻³ Pa |
| Operating Vacuum | 6×10⁻² Pa |
| Input Power | 380 V, 3-phase, 50 Hz |
| Rated Power | 34 kW |
| Output Current | 1000 A |
| Output Voltage | 34 V |
| Cooling Water Consumption | 0.8 m³/h |
| Cooling Water Pressure | 0.2 MPa |
| Inlet Water Temperature | 20 °C |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | MSM20-7 (Non-Consumable) |
| Dimensions (L×W×D) | 470 mm × 315 mm × 880 mm |
| Maximum Operating Temperature | 4000 °C |
| Temperature Control Accuracy | ±1 °C within ≤3500 °C |
| Sample Capacity | ≤200 g total |
| Vacuum Chamber | Ø200 mm × 300 mm |
| Vacuum Level (Standard) | ≤10⁻³ mbar |
| Vacuum Level (with Optional Molecular Pump) | ≤10⁻⁵ mbar |
| Electrode Material | Tungsten (W) |
| Output Current Range | 20–315 A |
| Number of Melting Positions | 7 |
| Crucible Diameter | Ø25 mm (depth: 8 mm, customizable) |
| Cooling | Integrated Recirculating Chiller (KJ-5000) with Deionized Water |
| Power Supply | AC 380 V, 50 Hz, ≤12 kW |
| Net Weight | 50 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSM20-7 |
| Power Supply | AC 380 V, 50 Hz |
| Total Power Consumption | <12 kW |
| Vacuum Chamber Dimensions | Ø200 mm × 300 mm |
| Vacuum Level | 10⁻³ mbar (with standard rotary vane pump) |
| Number of Melting Positions | 7 |
| Crucible Diameter | Ø25 mm, depth 8 mm (customizable) |
| Electrode Material | Tungsten (W) |
| Maximum Arc Temperature | up to 3500 °C |
| Operating Current Range | 20–315 A |
| Cooling | Integrated recirculating chiller (KJ-5000, deionized water) |
| Chamber Viewing Ports | Dual front/rear quartz windows |
| Tilting Mechanism | Motorized mechanical arm for in-situ ingot flipping under inert atmosphere |
| Chamber Door Opening | Ø120 mm |
| Footprint | 900 mm × 600 mm × 1800 mm (incl. frame) |
| Net Weight | 50 kg |
| Ambient Requirements | ≤1000 m altitude |
| Protective Atmosphere | High-purity argon (≥99.99 %), supplied via 6 mm double-ferrule fitting |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSM20-7 |
| Dimensions (L×W×D) | 1500 mm × 600 mm × 700 mm |
| Temperature Control Accuracy | ±5 °C (inferred from industrial arc furnace standards |
| Maximum Operating Temperature | 3500 °C |
| Sample Capacity | 7 parallel crucibles (Ø25 mm × 8 mm depth) |
| Vacuum Chamber | Ø200 mm × 300 mm |
| Base Vacuum (with VRD rotary vane pump) | 1 × 10⁻³ mbar |
| High-Vacuum Option (with GZK-103D molecular pump) | 1 × 10⁻⁵ mbar |
| Arc Current Range | 20–315 A |
| Cooling | Integrated KJ-5000 closed-loop deionized water chiller |
| Protective Atmosphere | High-purity argon (≥99.99%) |
| Power Supply | AC 380 V, 50 Hz, ≤12 kW |
| Net Weight | 50 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | MSM20-8 |
| Quotation | Upon Request |
| Power Supply | AC 380 V, 50 Hz |
| Total Power | <12 kW |
| Vacuum Chamber | Ø200 mm × 300 mm |
| Standard Crucible Configuration | 7-position copper crucible tray (6 × Ø20 mm × 8 mm + 1 suction-casting position Ø6 mm) |
| Crucible Capacity | 8 g (stainless steel, per Ø20×8 mm crucible) |
| suction-cast sample | Ø6 mm × ≤75 mm (15 g stainless steel) |
| Optional Crucibles | 1 × Ø40 mm × 8 mm (50 g), 4 × Ø25 mm × 12.5 mm (20 g each), suction-cast Ø10 mm × 75 mm (15 g) |
| Base Vacuum | ≤1 × 10⁻³ mbar (with rotary vane pump) |
| High Vacuum Option | ≤1 × 10⁻⁵ mbar (with turbomolecular pump system) |
| Non-Consumable Electrode | Ø4 mm tungsten rod (W) |
| Max Operating Temperature | >3500 °C |
| Arc Current Range | 20–315 A |
| Cooling | Integrated closed-loop deionized water chiller (included) |
| Gas Atmosphere | High-purity argon (≥99.99%) |
| Dimensions (L×W×H) | 900 mm × 600 mm × 1800 mm (including frame) |
| Net Weight | 50 kg |
| Ambient Requirements | Altitude ≤1000 m |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSM25-4 |
| Quotation | Available upon Request |
| Arc Melting Chamber | Ø200 mm × 300 mm (electropolished stainless steel) |
| Max Sample Mass per Crucible | ≤15 g (calibrated with stainless steel) |
| Number of Melting Positions | 4 |
| Sealing Capability | Ta tubes Ø5–Ø14 mm, L = 50–100 mm |
| Sealing Rotation Speed | 0–45 rpm (motorized, adjustable) |
| Base Vacuum | 6.0×10⁻¹ Pa (with standard mechanical pump) |
| Ultimate Vacuum | 5.0×10⁻³ Pa (with optional turbomolecular pump) |
| Arc Ignition | High-frequency start |
| Rated Input Power | 10.4 kVA |
| Cooling Method | Recirculating water cooling |
| Net Weight | 50 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSM25-4 Metal Arc Melting and Sealing Furnace |
| Vacuum Chamber Dimensions | Ø200 mm × 300 mm (stainless steel, electropolished) |
| Max Sample Mass per Crucible | ≤15 g (stainless steel reference) |
| Number of Melting Stations | 4 |
| Sealing Capability | Ta tubes Ø5–Ø14 mm, L = 50–100 mm |
| Base Vacuum (mechanical pump) | 6.0 × 10⁻¹ Pa |
| Ultimate Vacuum (with optional turbomolecular pump) | 5.0 × 10⁻³ Pa |
| Arc Ignition | High-frequency start |
| Rated Input Power | 10.4 kVA |
| Cooling | Closed-loop recirculating water chiller |
| Net Weight | 50 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | OTF-1200X |
| Price | Upon Request |
| Power Supply | AC 220 V, 50/60 Hz, 2.5 kW |
| Max Operating Temperature | 1200 °C (inert atmosphere required) |
| Continuous Service Temperature | 1100 °C |
| Heating Zone Length | 440 mm |
| Uniform Temperature Zone | 150 mm |
| Max Ramp/Cooling Rate | 20 °C/min |
| Temperature Control Accuracy | ±1 °C |
| Vacuum Level | 1×10⁻² torr (mechanical pump), 1×10⁻⁵ torr (turbo-molecular pump) |
| Leak Rate | <5 mtorr/min |
| Quartz Tube Options | Ø50/44 mm, Ø60/54 mm, Ø80/74 mm, Ø100/94 mm × 1000 mm (OD/ID × L) |
| External Dimensions | 590 × 380 × 520 mm |
| Net Weight | 40 kg |
| Cooling | Forced-air dual-shell circulation |
| Certification | CE |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | OTF-1200X-4-C4LV |
| Pricing | Upon Request |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | OTF-1200X-4-NW |
| Voltage | AC 220 V, 50/60 Hz |
| Power Rating | 3 kW |
| Maximum Operating Temperature (Furnace) | 1100 °C (<2 h), Continuous: 200–1000 °C |
| Maximum Operating Temperature (Preheater) | 500 °C (continuous), 600 °C (intermittent) |
| Heating Zone Length | 400 mm (furnace), 150 mm (preheater) |
| Quartz Tube Dimensions | OD 110 mm, ID 102 mm, L 381 mm |
| Sample Capacity | Up to 3-inch substrates |
| Temperature Control Accuracy | ±1 °C |
| Programmable Ramp Rate | Up to 10 °C/min |
| Controller | PID with 30-segment ramp-soak profile |
| Preheater Chamber | Stainless steel, Ø30 mm × 150 mm |
| Gas Inlets | Four 1/4″ VCR fittings on left flange |
| Vacuum Interface | KF25 quick-connect on right flange |
| Cooling | Optional recirculating chiller with water-cooled flange |
| Compliance | CE-certified |
| Dimensions (W×D×H) | 1200 mm × 450 mm × 510 mm |
| Weight | 100 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | OTF-1200X-4-R |
| Price | Upon Request |
| Power Supply | AC 220 V, 50/60 Hz, 2.5 kW |
| Max Operating Temperature | 1200 °C (<2 h), Continuous at 1100 °C |
| Heating Zone Length | 400 mm |
| Uniform Temperature Zone | 120 mm |
| Rotation Speed | 0–7 rpm |
| Tilt Angle Range | 0–30° |
| Control Accuracy | ±1 °C |
| Vacuum Level | 4.5 × 10⁻² torr |
| Leak Rate | <0.1 mtorr/s |
| Tube Capacity | 2 kg per batch |
| External Dimensions | 1300 × 600 × 1200 mm |
| Net Weight | 100 kg |
| Safety Certification | CE |