Industry-specific Instruments
Filter
Showing 2071–2100 of 6344 results
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | HAIDA HD-A840 Corrugating Tester |
| Working Speed | 4.5 rpm |
| Speed Accuracy | ±0.2 rpm |
| Temperature Control Range | Ambient to 200 °C |
| Standard Operating Temperature | 175 °C |
| Temperature Resolution | 1 °C |
| Temperature Accuracy | ±1% of setpoint |
| Adjustable Pressure Range | 49–108 N |
| Spring Tension | 100 N (adjustable) |
| Fluting Roller Outer Diameter | 228.5 ± 0.5 mm |
| Fluting Roller Thickness | 16 ± 0.05 mm |
| Number of Teeth | 84 |
| Tooth Profile | A-Flute |
| Upper Tooth Radius | 1.5 ± 0.1 mm |
| Lower Tooth Radius | 2.0 ± 0.1 mm |
| Flute Depth | 4.75 ± 0.05 mm |
| Sample Dimensions | 152 mm × 12.7 mm (L × W) |
| Overall Dimensions | Approx. 454 mm × 554 mm × 470 mm (L × W × H) |
| Weight | Approx. 60 kg |
| Power Supply | 1Ø AC 220 V |
| Total Power Consumption | ~1.8 kW |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | HAIDA HD-C522 Computer-Controlled Release Force Tester for Pressure-Sensitive Adhesives |
| Sensor Capacity | 10 N / 20 N / 50 N |
| Motor | 400 W Servo Motor |
| Driver | 400 W Servo Drive |
| Lead Screw | Precision Ball Screw |
| Control Mode | PC-Based Windows OS Interface |
| Adjustable Speed Range | 0.1–1000 mm/min |
| Maximum Travel | 500 mm (without fixtures) |
| Load Resolution | 1/250,000 FS |
| Load Accuracy | ≤ ±0.5% of reading |
| Force Measurement Range | 0.01–50 N |
| Unit Options | gf, kgf, N, kN, lbf, tonf |
| Dimensions (L×W×H) | 400 × 600 × 1000 mm |
| Weight | ~68 kg |
| Power Supply | 1∮ AC 220 V |
| Total Power Consumption | ~500 W |
| Standard Test | 180° Peel Release Force |
| Compliance | GB/T 2792–2014, ASTM D3330–22, GB/T 25256–2010, ISO 8510-2:2019 |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HAIDA HD-C524-12 Ambient-Temperature Tape Holding Power Tester |
| Test Stations | 12 |
| Timing Resolution | Hour-Minute (9999 h 59 min) / Hour-Minute-Second (99 h 59 min 59 s) / Minute-Second-Millisecond (99 min 59 s 59 ms) |
| Standard Load Mass | 1000 g ±5 g (including stainless steel triangular hook and hanging weight) |
| Triangular Hook Dimensions | 45 mm × 5 mm (edge length × wire diameter) |
| Standard Test Plate | 150 mm × 50 mm × 2 mm (L×W×H), SUS304 mirror-finish stainless steel |
| Surface Roughness | 50 nm ±25 nm (Ra) |
| Power Consumption | ~120 W |
| Internal Chamber Dimensions | ~987 mm × 175 mm × 430 mm (L×W×H) |
| Overall Dimensions | ~990 mm × 200 mm × 640 mm (L×W×H) |
| Weight | ~50 kg |
| Power Supply | 1∮ AC 220 V |
| Applicable Standards | GB/T 4851–2014 (Methods A, B, C), CNS 11888, PSTC-107 |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | HAIDA HD-C524-6 Ambient-Temperature Tape Holding Power Tester |
| Price | Upon Request |
| Test Stations | 6 |
| Timer Resolution | 0.01 s (mm:ss:ms mode), 1 s (hh:mm mode), 1 s (hh:mm:ss mode) |
| Standard Load Mass | 1000 g ±5 g (including stainless steel triangular ring and hook weight) |
| Triangular Ring Dimensions | 45 mm × 5 mm (edge length × wire diameter) |
| Standard Test Plate | 150 mm × 50 mm × 2 mm (L×W×H), SUS304 mirror-finish stainless steel |
| Surface Roughness of Test Plate | 50 nm ±25 nm (Ra) |
| Power Consumption | ~72 W |
| Internal Chamber Dimensions | 507 mm × 175 mm × 430 mm (L×W×H) |
| Overall Dimensions | 510 mm × 200 mm × 640 mm (L×W×H) |
| Weight | ~30 kg |
| Power Supply | 1∮ AC 220 V |
| Applicable Standards | GB/T 4851–2014 (Methods A, B, C), CNS 11888, PSTC-107 |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HD-C525 |
| Pricing | Available Upon Request |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HAIDA HD-H201 Temperature-Controlled Battery Short-Circuit Test Chamber |
| Quotation | Upon Request |
| Internal Chamber Dimensions | 400 × 400 × 400 mm (W × D × H) |
| Overall Dimensions | 650 × 550 × 1200 mm (W × D × H) |
| Temperature Range | Ambient to 200 °C |
| Temperature Display Resolution | 0.1 °C |
| Temperature Uniformity | ±2 °C |
| Heating Rate | (5 ± 1) °C/min |
| Inner Chamber Material | 1.2 mm SUS304 Stainless Steel |
| Outer Cabinet Material | 1.5 mm Cold-Rolled Steel with Powder Coating |
| Viewing Window | 250 × 250 mm Dual-Layer Tempered Glass with Stainless Steel Mesh |
| Door Configuration | Single Left-Swing Door with Explosion-Resistant Chain |
| Test Ports | Two Ø50 mm Penetration Ports on Right Side |
| Insulation Material | High-Efficiency Compressed Glass Wool |
| Safety Protections | Fuseless Circuit Breaker, Over-Temperature Cut-Off Switch, Thermal Fuse |
| Air Circulation | Convection-Based Forced-Air System |
| Control System | PLC + Touchscreen HMI |
| Exhaust Duct | Ø100 mm at Rear Panel |
| Temperature Sensing Range | Ambient to 1000 °C |
| Temp. Channel Count | 1 |
| Temp. Measurement Accuracy | ±0.5 °C |
| Voltage Input Range | 0–100 V |
| Voltage Channel Count | 1 |
| Voltage Accuracy | ±0.5% FS |
| Current Capacity | Up to 1000 A |
| Current Channel Count | 1 |
| Current Accuracy | ±0.5% FS |
| Short-Circuit Loop Resistance | 80 ± 20 mΩ |
| Mobility | Four Swivel Casters with Locks |
| Net Weight | 90 kg |
| Power Supply | AC 220 V |
| Rated Power | 2.5 kW |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | HD-H203 Battery Explosion-Proof Test Chamber |
| Quotation | Upon Request |
| Internal Dimensions | 500 × 500 × 500 mm (W × D × H) |
| External Dimensions | 680 × 750 × 1375 mm (W × D × H) |
| Inner Chamber Material | 1.2 mm thick SUS304 stainless steel with PTFE lining |
| Outer Enclosure Material | 1.5 mm cold-rolled steel with baked enamel finish |
| Observation Window | 250 × 250 mm dual-layer tempered glass with embedded stainless-steel mesh |
| Exhaust Port | Ø100 mm, rear-mounted |
| Pressure Relief Opening | 200 × 200 mm, rear-mounted, spring-actuated passive venting mechanism |
| Door Configuration | Single left-hinged door with explosion-resistant safety chain |
| Test Port | One Ø50 mm feedthrough on left side for thermocouples, voltage/current probes, and data cables |
| Mobility | Four swivel casters with locking brakes |
| Illumination | Integrated LED interior lighting |
| Control Interface | Push-button panel |
| Power Supply | AC 220 V, 200 W |
| Net Weight | 65 kg |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HD-H203-1 Dual-Layer Explosion-Proof Battery Test Chamber |
| Pricing | Upon Request |
| Internal Chamber Dimensions | 500 × 500 × 500 mm (W × D × H) |
| External Dimensions | 680 × 750 × 1375 mm (W × D × H) |
| Inner Wall Material | 1.2 mm SUS304 Stainless Steel with PTFE Lining |
| Outer Casing | 1.5 mm Powder-Coated Cold-Rolled Steel |
| Observation Window | 250 × 250 mm, Dual-Layer Tempered Glass with Stainless Steel Mesh |
| Exhaust Port | Ø100 mm, Rear-Mounted |
| Pressure Relief Opening | 200 × 200 mm, Rear-Mounted, Spring-Loaded Passive Release Mechanism |
| Door Configuration | Single Left-Swing Door with Explosion-Resistant Safety Chain |
| Test Port | One Ø50 mm Penetration Port on Left Side |
| Mobility | Four Swivel Casters with Locks |
| Illumination | Integrated LED Interior Light |
| Control Interface | Push-Button Panel |
| Power Input | AC 220 V, 200 W |
| Net Weight | 65 kg |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | HD-H204 |
| Quotation | Upon Request |
| Internal Chamber Dimensions | 400 × 400 × 400 mm (W×D×H) |
| External Dimensions | 630 × 620 × 1130 mm (W×D×H) |
| Internal Material | SUS304 Stainless Steel, 3.0 mm Thickness |
| External Material | Powder-Coated Cold-Rolled Steel, 1.5 mm Thickness |
| Observation Window | 250 × 250 mm, Dual-Layer Tempered Glass with Stainless Steel Mesh |
| Mobility | Four Swivel Casters with Brakes |
| Pressure Range | 0.5–100 kPa (Typical Test Point: 11.6 kPa) |
| Vacuum Display | Digital SMC Pressure Gauge |
| Control Interface | Push-Button Panel with LED Timer (0–9999 h) |
| Pressure Stability | ≤ ±5% of Setpoint |
| Door Configuration | Single Left-Swing Door with Explosion-Resistant Chain |
| Load Trays | 2 Stainless Steel Shelves |
| Net Weight | 120 kg |
| Power Supply | AC 220 V, 1 kW |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HAIDA HD-H206 Battery Crush & Impact Tester |
| Quotation | Upon Request |
| Internal Chamber Dimensions | 490 × 520 × 1430 mm (W×D×H) |
| External Dimensions | 700 × 1000 × 1700 mm (W×D×H) |
| Chamber Material | 1.2 mm SUS304 stainless steel with PTFE lining |
| Exterior Enclosure | 1.5 mm cold-rolled steel with powder coating |
| Viewing Window | 250 × 250 mm double-layer tempered glass with stainless steel mesh overlay |
| Exhaust Port | Ø100 mm, rear-mounted |
| Pressure Relief Port | 200 × 200 mm, rear-mounted, spring-actuated |
| Door Configuration | Left-hinged single door with safety interlock switch and explosion-proof chain restraint |
| Drop Mass | 9.1 ± 0.1 kg or 10 kg |
| Impact Height Range | 0–1000 mm (standard test height: 610 ± 25 mm) |
| Height Display | LED digital readout, resolution ±5 mm |
| Impact Rod | Ø15.8 ± 0.2 mm (5/8″) hardened 45# steel rod, horizontally mounted across cell center |
| Maximum Test Specimen Size | 200 × 200 × 200 mm |
| Impact Surface | 45# steel, 30 mm thick, baked enamel finish |
| Illumination | Integrated LED lighting for real-time visual monitoring |
| Net Weight | 270 kg |
| Power Supply | AC 220 V, 600 W, 50/60 Hz |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HAIDA HD-H209 Battery Combustion Test Chamber |
| Quotation | Available upon Request |
| Internal Chamber Dimensions | 750 × 750 × 500 mm (L×W×H) |
| External Dimensions (incl. door lock) | 1000 × 950 × 1310 mm (L×W×H) |
| Internal Material | SUS2304 Stainless Steel, 1.2 mm thickness |
| External Material | 1.5 mm Cold-Rolled Steel with Powder Coating |
| Viewing Window | 250 × 250 mm, Dual-Layer Tempered Glass with Stainless Steel Mesh |
| Exhaust Port Diameter | 100 mm (rear-mounted) |
| Pressure Relief Opening | 200 × 200 mm (rear-mounted, spring-actuated) |
| Door Configuration | Single left-swing door with safety interlock switch and explosion-proof chain |
| Control Interface | Push-button panel |
| Bunsen Burner Tip ID | 10 mm, length ≈ 100 mm |
| Combustion Duration Setting Range | 0–99 h 99 min |
| Test Aperture Diameter | 102 ± 2 mm |
| Test Wire Mesh | Woven stainless steel, 0.43 mm wire diameter, 20 mesh/inch |
| Flame Height Above Mesh | 38 mm |
| Octagonal Aluminum Enclosure | Opposite sides spaced 610 mm (24″), height 305 mm (12″), modular hinged design |
| Fuel Supply | Methane or LPG (user-supplied) |
| Net Weight | 160 kg |
| Power Supply | 1∮ AC 220 V |
| Rated Power | 200 W |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HD-H210 |
| Temperature Range | RT to 200 °C |
| Internal Dimensions (W×D×H) | 400 × 400 × 400 mm |
| External Dimensions (W×D×H) | 860 × 700 × 1310 mm |
| Temperature Display Resolution | 0.1 °C |
| Temperature Stability | ±1.0 °C |
| Temperature Uniformity | ±2 °C |
| Heating Rate | (5 ± 1) °C/min |
| Soak Time Range | 0–9999 h |
| Control Interface | Keypad-based Controller |
| Inner Chamber Material | 1.2 mm SUS304 Stainless Steel |
| Outer Cabinet Material | 1.5 mm Cold-Rolled Steel with Powder Coating |
| Viewing Window | 250 × 250 mm Dual-Layer Tempered Glass with Stainless Steel Mesh |
| Door Configuration | Single Left-Swing Door with Explosion-Proof Chain |
| Test Ports | Two Ø50 mm Penetration Ports (Right Side) |
| Insulation | High-Efficiency Compressed Glass Wool |
| Safety Protections | Non-fuse Breaker, Over-Temperature Cut-off Switch, Thermal Fuse, Audible Alarm on Over-Temp Event |
| Air Circulation | Convection-Based Forced-Air System |
| Net Weight | 75 kg |
| Power Supply | AC 220 V |
| Rated Power | 2 kW |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic (China) |
| Model | HD-H211 |
| Quotation | Upon Request |
| Control System | PLC + Touchscreen HMI |
| Drive Mechanism | Servo Motor |
| Solution Temperature Range | Ambient to 80 °C (adjustable) |
| Standard Test Temp | 45 ± 2 °C |
| Test Drum Outer Diameter | Ø500 ± 10 mm |
| Inner Tank Diameter | 650 mm |
| Inner Tank Depth | 600 mm |
| Rotational Speed | 1–999 rpm (adjustable) |
| Inner Chamber Material | SUS#304 Stainless Steel |
| Outer Casing Material | Cold-Rolled Steel with Powder Coating |
| Test Duration Range | 0–9999 h/min/sec (programmable) |
| Temperature Control Method | PID Algorithm |
| Test Solution | pH 11.0 ± 0.1 (e.g., 0.004 wt% NaOH), heated to 45 ± 2 °C |
| Sample Immersion Depth | Battery center positioned at 300 ± 10 mm below liquid surface |
| Inner Chamber Dimensions (W×D×H) | 900 × 900 × 645 mm |
| Overall Dimensions (W×D×H) | 1200 × 1150 × 1880 mm |
| Net Weight | 230 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 6 kW |
| Operating Environment | Ambient Temp. 0–35 °C |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HD-H212 |
| Quotation | Upon Request |
| Internal Chamber Dimensions (W×D×H) | 520 × 450 × 560 mm |
| External Dimensions (W×D×H) | 800 × 700 × 1730 mm |
| Internal Material | 1.2 mm thick SUS#304 stainless steel |
| External Material | 1.5 mm thick A3 steel with baked enamel finish |
| Observation Window | 250 × 250 mm dual-layer tempered glass with embedded stainless-steel mesh |
| Exhaust Port Diameter | 100 mm (rear-mounted) |
| Pressure Relief Port | 200 × 200 mm (rear-mounted, spring-loaded passive venting) |
| Door Configuration | Single left-hinged door with safety interlock switch and side-mounted explosion-proof chain |
| Test Port | One Ø50 mm port on left side wall |
| Illumination | Integrated LED lighting for real-time visual monitoring |
| Actuation | Hydraulic drive system |
| Force Range | 1–20 kN |
| Force Resolution | 0.1 N |
| Crush Stroke | 250 mm |
| Force Display | 7-inch industrial touchscreen HMI |
| Standard Crush Platen | Flat rigid plate ≥20 cm² contact area |
| Crush Load Target | 13.0 ± 0.2 kN, held for 60 s |
| Nail Specifications | Austenitic stainless steel (e.g., AISI 304), Ø2–8 mm, L = 100 mm (custom lengths available) |
| Penetration Speed | Adjustable 4–40 mm/s |
| Net Weight | 280 kg |
| Power Supply | AC 380 V, 3-phase, 50/60 Hz |
| Rated Power | 2 kW |
| Key | Origin: Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | China (Domestically Assembled) |
| Model | VDP6800 |
| Instrument Type | Variable-Temperature Hall Effect Tester |
| Constant Current Source Range | 1 nA to 20 mA |
| Test Voltage Range | ±10 V |
| Mobility Range | 1–10⁷ cm²/(V·s) |
| Maximum Applied Voltage | 10 V |
| Resistivity Range | 10⁻⁵–10⁷ Ω·cm |
| Carrier Concentration Range | 10⁷–10²¹ cm⁻³ |
| Magnetic Field Options | 0.65 T or 1 T permanent magnet |
| Temperature Capability | Room temperature and liquid nitrogen (77 K) |
| Sample Holder | Spring-loaded Van der Pauw probe fixture (no sample patterning required) |
| Compatible Materials | Si, ZnO, SiGe, SiC, GaAs, InGaAs, InP, GaN (n-type and p-type) |
| Dimensions (W×D×H) | 260 × 220 × 180 mm |
| Weight | 6 kg |
| Brand | Hamamatsu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | C11347-11 |
| Measurement Mode | DC |
| Excitation Wavelength Range | 250–800 nm |
| Excitation Bandwidth (FWHM) | <10 nm |
| PL Emission Range | 300–950 nm |
| Spectrometer Type | Czerny-Turner |
| Detector | Cooled Back-Illuminated CCD (1024 channels, -15 °C, 16-bit A/D) |
| Spectral Resolution | <2 nm |
| Integrating Sphere Material | Spectralon® |
| Sphere Diameter | 3.3 inch |
| Fiber Optic Bundle | 1.5 m, 1 mm Ø input aperture |
| Sample Temperature Range | -196 °C (77 K) to +180 °C |
| Sample Forms | Solution, Thin Film, Powder, Solid |
| Brand | Hamamatsu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | Quantaurus-QY |
| Measurement Mode | DC |
| Excitation Wavelength Range | 250–800 nm |
| Emission Wavelength Range | 300–950 nm |
| Excitation Bandwidth (FWHM) | <10 nm |
| Spectrometer Type | Czerny-Turner |
| Detector | Cooled Back-Illuminated CCD |
| Detector Channels | 1024 |
| Detector Cooling Temperature | −15 °C |
| A/D Resolution | 16 bit |
| Spectral Resolution | <2 nm |
| Integrating Sphere Material | Spectralon® |
| Sphere Diameter | 3.3 inch |
| Fiber Optic Bundle Length | 1.5 m |
| Input Aperture Diameter | 1 mm |
| Brand | Hamamatsu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | C13534-11 |
| Price Range | USD 140,000 – 280,000 (FOB Japan) |
| Measurement Mode | DC (Steady-State) |
| Brand | Hamamatsu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | C13534-12 |
| Price Range | USD 135,000 – 270,000 (FOB Japan) |
| Measurement Mode | DC (Steady-State) |
| Brand | Hamamatsu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | C9920-02 |
| Measurement Mode | DC |
| Detection Method | Photoluminescence (PL) |
| Optical Integration | Nitrogen-purged integrating sphere |
| Spectral Detection | CCD-based full-spectrum synchronous acquisition |
| Sample Formats | Thin films, powders, liquid solutions in cuvettes |
| Compliance | ISO 11664-1:2019 (CIE colorimetry), ASTM E2758-18 (quantum yield measurement of luminescent materials) |
| Brand | Hamamatsu Photonics (BHP) |
|---|---|
| Model | BHP9505-04 |
| Detection Range | 0–10⁷ RLU |
| Microbial Count Display | 0–10¹⁷ CFU/mL |
| Spectral Response | 300–650 nm |
| Integration Time | 1–300 s (user-adjustable) |
| Data Storage | 2,000 test records |
| Repeatability | ≤3% |
| Background Count Rate | ≤30 s⁻¹ |
| Dimensions | 190 × 100 × 70 mm |
| Operating Temperature | 5–30 °C |
| Relative Humidity | ≤85% |
| Power Supply | Dual AC/DC |
| Brand | Hanatek |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | CBT1 |
| Price | USD 13,500 (FOB UK) |
| Compliance Standards | BS 6965-1:1988, BS 3748, ISO 2493, TAPPI T556, DIN 53121, SCAN P29 |
| Resolution | 0.1 g |
| Accuracy | ±0.1 g |
| Measurement Range | 0–450 gf |
| Power Supply | 110/240 V AC, 50/60 Hz |
| Dimensions (H×W×D) | 230 × 175 × 250 mm |
| Net Weight | 7.6 kg |
| Packaging Weight | 10 kg |
| Sample Preparation Tools | BS 6965–compliant dedicated crease sample cutter, universal sample cutter, label printer with custom interface cable and preloaded firmware |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HANATEK CFA |
| Price | Upon Request |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | Hanatek MFI |
| Price | Upon Request |
| Brand | Hanon |
|---|---|
| Model | DF06 |
| Origin | Shandong, China |
| Type | Automated Enzymatic-Gravimetric Dietary Fiber Analyzer |
| Standards Compliance | GB 5009.88, GB/T 22224-2008, AOAC 985.29, AOAC 991.43 |
| Sample Capacity | 0.2–1 g per vessel |
| Throughput | 6 independent channels |
| Temperature Control Accuracy | ±1 °C |
| Repeatability (RSD) | ≤1% |
| Total Dietary Fiber (TDF) Assay Time | ~3.5 h |
| Insoluble (IDF) / Soluble (SDF) Fiber Assay Time | 1–3 h |
| Filtration Method | Vacuum-assisted membrane filtration (no backflush or external air supply) |
| Power Supply | AC 220 V ±10%, 50 Hz ±1 Hz |
| Rated Power | 1300 W |
| Dimensions (L×W×H) | 800 × 350 × 650 mm |
| Net Weight | 60 kg |
| Software Compliance | FDA 21 CFR Part 11–compliant user authentication and audit trail |
| Brand | Hanon |
|---|---|
| Origin | Shandong, China |
| Model | F2000 |
| Sample Capacity | 24+ positions per batch |
| Temperature Control Accuracy | ±0.1°C |
| Repeatability | ≤0.5% RSD |
| Daily Throughput | ≥96 samples (4 batches) |
| Power Supply | AC 220±10 V, 50±1 Hz |
| Rated Power | 2000 W |
| Dimensions (L×W×H) | 520 × 450 × 510 mm |
| Net Weight | 52 kg |
| Compliance | GB/T 6434-2006, GB/T 20805-2006, GB/T 20806-2006, GB/T 5515-2008, GB/T 8310-2013, GB/T 5009.10-2003 |
| Brand | Hanon |
|---|---|
| Model | F800 |
| Origin | Shandong, China |
| Type | Semi-Automatic Fiber Analyzer |
| Compliance | GB/T 5515, GB/T 6434 |
| Sample Capacity | 6 samples/batch |
| Sample Weight Range | 0.5–3 g |
| Detection Range | 0.1–100% |
| Repeatability | ≤0.4% (for crude fiber <10%), ≤1% (for crude fiber ≥10%) |
| Heating Method | Integrated Infrared Heating |
| Preheating Time (Distilled Water) | 10–12 min |
| Boiling Time | 13–15 min |
| Rated Power | 2.2 kW |
| Voltage/Frequency | 220 VAC ±10%, 50 Hz |
| Dimensions | 776 × 476 × 644 mm |
| Optional Accessory | F800-B Cold Extraction Unit |
| Brand | Hanon |
|---|---|
| Origin | Shandong, China |
| Model | FCL35-20 |
| Instrument Type | Beer-Specific Accelerated Stability Testing System |
| Application | Laboratory-Based Shelf-Life Prediction |
| Temperature Range | 0–60 °C |
| Temperature Control Accuracy | ±0.05 °C |
| Display Resolution | ±0.01 °C |
| Bath Capacity | 35 L |
| Bath Opening Dimensions | 350 × 270 × 300 mm |
| Sample Capacity | 12 Bottles (adjustable basket) |
| Refrigeration Power | 1.05 kW (at 20 °C), 0.68 kW (at 0 °C), 0.35 kW (at −20 °C) |
| Heating Power | 2 kW |
| Pump Pressure Range | 0–0.8 bar |
| Pump Flow Rate | 0–20 L/min |
| Power Supply | 220 V AC ±10%, 50 Hz |
| Ambient Operating Temperature | 5–40 °C |
| Dimensions (L×W×H) | 640 × 440 × 740 mm |
| Weight | 50 kg |
| Touchscreen | 7-inch Color LCD with Capacitive Touch |
| Connectivity | Dual-band 2.4/5 GHz Wi-Fi Module |
| Compliance | Designed for ASTM E2041, ISO 11348, and internal brewery QC protocols requiring accelerated aging under controlled thermal cycling |
| Brand | Hanon |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | OS280 |
| Pricing | Upon Request |
| Measurement Principle | Capacitive Sensing of Total Polar Materials (TPM) |
| Temperature Range | 0–200 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±1 °C |
| TPM Range | 0–50% |
| TPM Accuracy | ±2% TPM |
| TPM Resolution | 0.1% |
| TPM Response Time | <10 s |
| Temperature Sensor | PTC |
| TPM Sensor | Patented Capacitive Sensor (Patent No.: ZL201310243911.2) |
| Display | Color LCD with Chinese UI |
| Operating Temp. | 0–50 °C |
| Storage Temp. | −40–70 °C |
| Enclosure Material | ABS Engineering Plastic |
| Probe Material | Food-Grade Stainless Steel (316) |
| IP Rating | IP65 |
| Power | Two AA Alkaline Batteries (1.5 V each) |
| Data Storage Capacity | 10,000 Records |
| Weight (with protective probe cap) | 218 g |
| Wireless Connectivity | Wi-Fi & Bluetooth |
| Probe Design | Quick-Release Modular Probe |
| Brand | Hanon |
|---|---|
| Origin | Shandong, China |
| Model | SOA100 |
| Detection Range | 0.1–50 mg |
| Detection Limit | ppm-level |
| Sample Throughput | 5–10 min/sample |
| Stirring Speed | 15–1500 rpm |
| Repeatability | RSD ≤ 1% |
| Distillation Time | 0–90 min |
| Cooling Water Consumption | 1.5 L/min |
| Display | 4.3-inch high-resolution color LCD |
| Rated Power | 1.3 kW |
| Input Voltage | 220 VAC ±10%, 50 Hz |
| Dimensions (L×W×H) | 400 × 385 × 735 mm |
| Net Weight | 30 kg |