Industry-specific Instruments
Filter
Showing 2491–2520 of 6344 results
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-106 |
| Price | Upon Request |
| Measurement Range | 0–1999 cd/lx/m² |
| Uncertainty | <5% |
| Observation Angle | 0.2° |
| Entrance Angle | −4° |
| Light Source | Warm White LED |
| Detector | V(λ)-Corrected Photoreceptor |
| Operating Temperature | −10°C to +40°C |
| Relative Humidity | ≤80% RH |
| Dimensions | 200 × 155 × 59 mm |
| Power Supply | Rechargeable 9 V / 800 mAh Li-ion Battery |
| Brand | Jiubin |
|---|---|
| Model | JB-117A-F |
| Origin | Shanghai, China |
| Application | Packaging & Aerospace Composite Materials Testing |
| Max Load Capacity | 20 kN / 50 kN (selectable) |
| Effective Test Height | 1000 mm |
| Effective Test Width | 380 mm (customizable) |
| Force Accuracy | ±0.5% of full scale |
| Displacement Resolution | 0.001 mm |
| Speed Range | 0.001–500 mm/min |
| Force Resolution | 1/500,000 |
| Power Supply | AC 220 V, 50 Hz |
| Weight | ~350 kg |
| Operating Temperature | –20 ± 2 °C or 22 ± 5 °C (ambient) |
| Brand | Jiubin |
|---|---|
| Model | JB-120 |
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Grinding Bowl Diameter | 120 mm |
| Grinding Bowl Depth | 34 mm |
| Pestle Rotation Speed | 20–90 rpm |
| Mortar Rotation Speed | 10 rpm |
| Pestle Motor Power | 25 W |
| Mortar Motor Power | 10 W |
| Bowl & Pestle Material | Natural Agate |
| Grinding Time Range | 1–900 min |
| Dimensions (L×W×H) | 240 × 240 × 500 mm |
| Net Weight | 12 kg |
| Voltage | 110/220 V, 50/60 Hz |
| Brand | Jiubin |
|---|---|
| Model | JB-2025 |
| Origin | Shanghai, China |
| Temperature Range | Ambient to 230 °C (±0.3 °C) |
| Temp. Resolution | ±0.01 °C |
| Heating Rate | 30–190 °C in <6 min |
| Cavity Type | Sealed dual-conical oscillating cavity |
| Cavity Gap | 0.45 mm (standard) |
| Drive System | Direct-drive servo motor |
| Oscillation Frequencies | 0.1, 0.5, 1.0, 1.67, 2.0, 20 Hz |
| Oscillation Angles | ±0.2°, ±0.5°, ±1.0°, ±7.143° |
| Strain Amplitudes | ±2.8%, ±7%, ±14%, ±100% |
| Torque Range | 0.01–200 dNm |
| Torque Resolution | 0.01 dNm |
| Torque Accuracy | ±0.5% |
| Closure Force | ≥11.5 kN |
| Sample Volume | ~4.5 cm³ |
| Compliance | ASTM D5289, D6204, D6601 |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-2300 |
| Pricing | Available Upon Request |
| Power Consumption | <10 W (Static: 5 W) |
| Internal Power Supply | DC 9.6 V (8 × 1.2 V / 700 mAh Ni-Cd batteries) |
| External Power Input | DC 12 V |
| Communication Interface | Standard 9-pin RS232 (TXD on Pin 3, RXD on Pin 2, GND on Pin 5) |
| Serial Configuration | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Dimensions | 205 × 145 × 55 mm |
| Weight | 1.0 kg (including battery) |
| Operating Temperature | −15 °C to +45 °C |
| Relative Humidity | 30%–80% RH |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-2454 |
| Pricing | Upon Request |
| Drawer Width Range | 150–1300 mm (adjustable) |
| Load Capacity | 0–100 N (programmable load-triggered stop) |
| Test Speed | 0.3–2 m/s |
| Stroke Accuracy | ≤ ±0.25 m |
| Stroke Range | 0.05–99.9 km (resolution: 0.25 m) |
| Time Measurement Error | ±0.1 s |
| Overall Dimensions (L×W×H) | 800 × 600 × 1200 mm |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-3000 |
| Pricing | Available Upon Request |
| Brand | Jiubin |
|---|---|
| Model | JB-3009 |
| Load Range | 0–5 N |
| Accuracy Class | 0.5 |
| Traverse Distance | 70 mm / 150 mm |
| Standard Sled Mass | 200 g |
| Test Speed | 100 mm/min |
| Operating Temperature | 10–40 °C |
| Relative Humidity | 20–70 % RH |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 400 × 300 × 180 mm |
| Weight | 10 kg |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM5 |
| Price Range | USD 9,800 – 16,800 |
| Operating Pressure Range | 0–0.8 MPa (adjustable) |
| Test Temperature | Ambient (optional low-/high-temperature chamber available) |
| Air Hose Internal Diameter | 20 mm / 15 mm |
| Air Reservoir Volume | 136 L |
| Nozzle Tube Internal Diameter | 30 mm / 53 mm |
| Specimen Orientation | 45°, 54°, or 90° for flat samples |
| Sound Pressure Level | ≤120 dB(A) (hearing protection required) |
| Duty Cycle | Continuous operation capable |
| Impact Media | Gravel, crushed stone, calibrated abrasive particles |
| Feed Rate Control | Electromagnetic vibratory feeder |
| Airflow Pressure Regulation | Manual needle valve |
| Required External Compressor | ≥2 m³/min at 0–0.8 MPa |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM5 |
| Price Range | USD 7,000 – 14,000 |
| Pressure Range | 0–0.8 MPa (adjustable) |
| Test Temperature | Ambient (optional low-/high-temperature chamber available) |
| Air Hose Internal Diameter | 15 mm / 20 mm |
| Air Reservoir Volume | 136 L |
| Nozzle Tube Internal Diameter | 30 mm / 53 mm |
| Sample Mounting Angles | 45°, 54°, 90° (flat specimens) |
| Sound Pressure Level | ≤120 dB(A) |
| Operation Mode | Continuous-duty cycle |
| Impact Media | Calibrated gravel or crushed stone (ASTM D3292-compliant grading) |
| Feed Rate Control | Electromagnetic vibratory feeder |
| Airflow Pressure Control | Manual needle valve |
| Required Compressed Air Supply | User-provided |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM5 |
| Price Range | USD 7,000 – 14,000 |
| Operating Pressure Range | 0–0.8 MPa (adjustable) |
| Test Temperature | Ambient (optional low-/high-temperature chamber available) |
| Air Hose Internal Diameter | 15 mm / 20 mm |
| Air Reservoir Volume | 136 L |
| Nozzle Tube Internal Diameter | 30 mm / 53 mm |
| Specimen Orientation Angles | 45°, 54°, 90° (flat specimens) |
| Sound Pressure Level | ≤120 dB(A) |
| Duty Cycle | Continuous operation capable |
| Impact Media | Gravel, crushed stone, calibrated abrasive particles |
| Feed Rate Control | Electromagnetic vibratory feeder |
| Airflow Pressure Regulation | Manual needle valve |
| Required External Compressor | ≥2 m³/min at 0–0.8 MPa |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | JM-V |
| Pricing | Upon Request |
| Brand | Jingke Ruida (Kyocera) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JK-8000 |
| Pricing | Upon Request |
| Detection Principle | Flame Photometric Detection (FPD) with Dual FPD Configuration |
| Detection Wavelength | 394 nm (S-specific emission) |
| Minimum Detectable Sulfur | ≤0.02 ppm (v/v) |
| Sensitivity (S) | 1–8 × 10⁻¹² g/s |
| Baseline Noise | ≤0.5 mV/h |
| Oven Temperature Range | Ambient to 400 °C ±1 °C |
| Column Compatibility | Reversible packed & wide-bore capillary columns |
| System Materials | PTFE-lined flow path throughout |
| Regulatory Compliance | ASTM D6667, ISO 8573-5, USP <232>/<233>, GLP-compliant data handling |
| Brand | Jingke Ruida (JKRD) |
|---|---|
| Origin | USA |
| Model | JK-8000 |
| Detection Principle | Flame Photometric Detection (FPD) with Dual FPD Configuration |
| Detection Wavelength | 394 nm |
| Minimum Detectable Sulfur Concentration | ≤0.02 ppm (v/v) |
| Sensitivity (as sulfur) | ≤8×10⁻¹² g/s |
| Baseline Noise | ≤0.5 mV/h |
| Oven Temperature Range | Ambient to 400 °C ±1 °C |
| Column Material Compatibility | PTFE-lined flow path |
| Sample Types | Natural gas, coal gas, coke oven gas, LPG, food-grade CO₂, flue gas, biogas |
| Regulatory Compliance | ASTM D6667, ISO 8573-5, USP <621>, GLP/GMP-ready data handling |
| Software | Integrated chromatography workstation with audit trail, peak integration, calibration curve generation, and report export (PDF/CSV) |
| Brand | JKRD |
|---|---|
| Origin | USA |
| Model | BGC-4500 |
| Detection Principle | Gas Chromatography with Thermal Conductivity Detection (TCD) |
| Sample Interface | Direct Pipeline Coupling |
| Analysis Cycle | <10 min |
| Quantitative Repeatability | RSD ≤ 1% |
| Temperature Control Accuracy | ±0.1°C |
| Operating Environment | 5–50°C, 10–85% RH |
| Power Supply | AC 220 V / DC 12 V / 24 V |
| Carrier Gas | High-Purity H₂ (≥99.995%), 0.3 MPa |
| Certified Standards Compliance | GB/T 13610–2020, GB/T 11062–2014, GB/T 12206–2006, ASTM D1945, ISO 6974–2, EN 16726 |
| Data Output Protocol | Modbus RTU |
| Software Features | Real-time Wobbe Index, Higher/Lower Heating Value (HHV/LHV), Density, Relative Density, Combustion Potential Calculation |
| Detector Sensitivity | TCD S ≥ 4500 mV·mL/mg (benzene), Noise ≤ 0.02 mV |
| Column | 3 mm ID Passivated Stainless Steel Capillary Column |
| Valve System | Imported VICI 10-Port Rotary Valve (≥5×10⁶ actuation cycles) |
| Sample Requirements | Dust-free, Water-free, Oil-free Gas Stream |
| Brand | Josvok |
|---|---|
| Origin | Tianjin, China |
| Model | YD-35 |
| Hardness Range | 1–350 N (Resolution: 0.1 N, Accuracy: ±0.03 kg) |
| Diameter Range | 2.0–30.0 mm (Accuracy: ±0.01 mm) |
| Units | N / kg / Sc (hardness), mm / inch (diameter) |
| Measurement Modes | Manual single-tablet, Automatic batch (up to 160 tablets) |
| Display | LCD, 4×8 Chinese or 8×16 English |
| Data Output | Statistical analysis, timestamped reporting, calibration logging, self-diagnostic alerts |
| Compliance | Designed for pharmacopeial compliance per USP <1217>, EP 2.9.8, and ChP IV |
| Brand | Josvok |
|---|---|
| Origin | Tianjin, China |
| Model | ZB-1D |
| Temperature Range | 5.0 °C (or ambient) to 40.0 °C (0.1 °C resolution) |
| Temperature Accuracy | ±0.5 °C |
| Timing Range | 0–600 minutes (1-minute resolution) |
| Basket Stroke Frequency | 30–32 cycles/min |
| Basket Stroke Amplitude | 55 mm ±1 mm |
| Distance from Sieve to Beaker Bottom | 25 mm ±2 mm |
| Sieve Aperture Options | 2.0 mm and 0.425 mm |
| Brand | Josvok |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZPJ-4 |
| Price | USD 2,050 (FOB Tianjin) |
| Temperature Control Range | 20–40 °C ±0.3 °C |
| Speed Adjustment Range | 20–200 rpm ±2 rpm |
| Timing Range | 1–900 min ±0.5 min |
| Paddle Wobble | ±0.5 mm |
| Basket Wobble | ±1.0 mm |
| Disintegration Stations | 2 |
| Reciprocating Frequency | 30–32 cycles/min |
| Stroke Distance | 55 mm ±2 mm |
| Friability Drum | 1 unit, internal diameter 286 mm, depth 39 mm, drop height 156 mm, rotation speed 25 rpm ±1 rpm, total revolutions 100 ±1 |
| Hardness Measurement Range | 2–199 N ±1 N |
| Tablet Diameter Compatibility | 3–40 mm |
| Power Supply | 220 V / 50 Hz / 600 W |
| Dimensions (W×D×H) | 520 × 380 × 470 mm |
| Brand | Josvok |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZSO2-3000A |
| Detection Limit | 1 µg |
| Detection Range | 1–1000 µg |
| Instrument Type | Benchtop Dedicated Analyzer |
| Heating Method | Infrared Ceramic Heating (Flameless) |
| Display | LCD Touchscreen Interface |
| Cooling Option | External or Optional Built-in Recirculating Chiller |
| Nitrogen Flow Control | Precision Mass Flow Regulator |
| Power Control | Adjustable Independent Heating Zones with Countdown Timer and Audible Alert |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Dosi-fiber |
| Sample Capacity | 6 positions |
| Throughput | up to 36 samples/day (Weende method) |
| Sample Mass Range | 0.5–3 g (typical 1 g) |
| Measurement Range | 0.1–100% |
| Repeatability | ±1% (for fiber content 1–30%) |
| Accuracy | ±0.1% |
| Cooling Water Consumption | 1 L/min |
| Heating System | Infrared elements |
| Housing | Rilsan-coated robust enclosure |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JQ03A |
| Price Range | USD 7,000 – 14,000 |
| Force Range & Accuracy | 0–200 cN, ±0.1% f.s. |
| Elongation Range & Resolution | ≤150 mm, 0.01 mm |
| Gauge Lengths | 10, 20, 25 mm (software-selectable) |
| Clamping | Pneumatic fiber grippers |
| Tensile Speed | 2–100 mm/min |
| Test Modes | Constant-elongation cyclic tensile, constant-load cyclic tensile, stress relaxation, creep, overload & overtravel protection, auto-zero calibration |
| Data Acquisition | PC-controlled real-time acquisition and curve visualization |
| Compliance Standards | GB/T 9997, GB/T 14337, BS EN ISO 5079:1996 |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | JQ03B |
| Price Range | USD 7,000 – 14,000 |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JQ03D |
| Price Range | USD 7,000 – 14,000 |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | JQ05 |
| Price Range | USD 7,000 – 14,000 |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | JQN04C |
| Price Range | USD 7,000 – 14,000 |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JSF08M |
| Pricing | Available Upon Request |
| Brand | JTONE |
|---|---|
| Origin | Beijing, China |
| Model | SO2-3000 |
| Detection Target | Sulfur Dioxide (SO₂) |
| Detection Range | Ammonia Nitrogen, Volatile Phenols |
| Detection Principle | Acid Distillation–Iodometric Titration (Standard Pharmacopoeia Method) |
| Distillation Units | 3 |
| Heating Temperature Control Range | Up to 200 °C |
| Heating Method | Sealed Infrared Ceramic Heater |
| Cooling System | External Recirculating Chiller (Optional Internal Chiller) |
| Nitrogen Flow Control | Individual Precision Mass Flow Meters per Channel |
| Power Rating | 1850 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Dimensions (L×W×H) | 800 × 520 × 850 mm |
| Safety Features | Leakage Protection, Dry-Run Prevention |
| Standard Flask Configuration | 1000 mL Distillation Flasks × 3, 100 mL Conical Receivers × 3 |
| Display | LCD Touchscreen Interface |
| Compliance | Designed for Chinese Pharmacopoeia (ChP) 2020 Edition Method II (SO₂ Residue Determination), Compatible with USP <231>, EP 2.4.24, and ISO 5840:2016 (SO₂ in Herbal Materials) |
| Brand | JTONE |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | ZW-2008 |
| Price | Upon Request |
| Power Supply | 220 V / 50 Hz |
| Power Consumption | 120 W |
| Speed Range | 0–240 rpm |
| Housing Material | AISI 304 Stainless Steel |
| Overall Height | 35 cm |
| Weight | 15 kg |
| Filter Pore Sizes Compatible | 0.22 µm, 0.45 µm, 0.8 µm |
| Safety Protection | Low-voltage electromagnetic cutoff, optical-electric safety interlock |
| Regulatory Compliance | Designed for USP <71>, USP <61>, EP 2.6.12, ISO 11737-1, and Chinese Pharmacopoeia (2020 Edition) microbial limit and sterility testing procedures |
| Consumable Compatibility | Universal fit for globally standardized reusable and disposable closed-system filtration assemblies (e.g., Sartorius, Pall, MilliporeSigma, Thermo Fisher, and domestic certified equivalents) |
| Brand | Ju Chuang Environmental |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | JC-CQ-R |
| Instrument Type | Pest Surveillance System |
| Power Consumption | ≤200 W (operational), ≤25 W (standby) |
| Power Supply | 220 VAC ±10% / 50 Hz or Solar-Powered Configuration Available |
| Dimensions (H×W×D) | 2117.7 mm × 769 mm × 779 mm (including base) |
| Display | 10.1-inch Android-based capacitive touchscreen interface |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | ABT-85 |
| Temperature Range | −70 °C to +20 °C |
| Temperature Stability | ±0.05 °C to ±0.1 °C |
| Display | 5.7″ TFT Touchscreen (0.01 °C resolution) |
| Heating Power | 6 kW |
| Refrigeration Capacity | 2.5 kW @ 20 °C |
| Pump Flow Rate | 35–80 L/min |
| Pump Pressure | 0.48–3.2 bar |
| Compressor | Two-stage, air-cooled |
| Heat Exchanger | Integrated secondary circuit |
| Circulation Pump | Dual-stage, intelligent pressure control |
| Thermal Fluid | Thermal HL80 |
| Dimensions (W×D×H) | 61 × 108 × 125 cm |
| Sealing | Hydraulic seal compatible with glycol-based heat transfer fluids |
| Communication Interfaces | RS485, Ethernet, Modbus TCP, optional remote control unit |