Optical Measurement Instruments
Filter
Showing 1081–1110 of 3701 results
| Brand | Cobolt |
|---|---|
| Origin | Sweden |
| Model | DLC Series |
| Wavelength Range | 457–594 nm |
| Output Power Options | 25–300 mW per line |
| Spectral Linewidth | <1 MHz (<0.01 pm) |
| Spatial Mode | TEM₀₀, M² < 1.1 |
| Beam Diameter (aperture) | 700 µm |
| Beam Divergence (full angle) | <1.2 mrad |
| Beam Overlap | <250 µrad |
| Long-Term Power Stability (8 h) | <±3% (at ±3°C ambient) |
| Beam Pointing Stability | <25 µrad/°C |
| Polarization Ratio | >100:1 (linear) |
| Total Power Consumption | <70 W (typ. <30 W) |
| Operating Temperature | 10–40 °C |
| Heat Sink Thermal Resistance | 0.5 K/W |
| Dual Combiner Dimensions | 190 × 65 × 46 mm |
| Controller Dimensions | 190 × 72 × 28 mm |
| Communication Interface | RS-232 or USB |
| CDRH Compliance | Integrated key-switch |
| Warranty | 12 months (24 months on laser heads) |
| Brand | Cobolt |
|---|---|
| Origin | Sweden |
| Model | FIC-01 / FIC-02 / FIC-03 / FIC-04 |
| Fiber Core Size | 3.5 µm (SM/PM) or 100 µm (MM) |
| Coupling Efficiency | >60% (SM/PM), >80% (MM) |
| Collimated Beam Diameter | 0.7 ± 0.05 mm |
| Connector Options | APC, FC/PC (angled), FCP8 |
| Dimensions (mechanics × fiber) | FIC-01: 239×140×52 mm / 215×140×52 mm |
| FIC-02 | 103×60×40 mm / 40×33×33 mm |
| FIC-03 | 260×140×56 mm / 40×33×33 mm |
| FIC-04 | 200×102×97 mm / 40×33×33 mm |
| Brand | Cobolt |
|---|---|
| Origin | Sweden |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | newopto |
| Price | Upon Request |
| Center Wavelength Range | 2–5 µm |
| Average Output Power | >100 mW |
| Repetition Rate | >10 kHz |
| Pulse Width | <5 ns |
| Pulse Energy | >5 µJ |
| Spectral Bandwidth | <1.5 nm |
| Tuning Range | >10 nm (via crystal temperature) |
| Beam Ellipticity | >0.90:1 |
| Collimated Beam Diameter | 1.5 mm |
| Full-Angle Beam Divergence | <3.5 mrad |
| Pulse-to-Pulse Timing Jitter | <1 µs |
| 8-Hour Long-Term Power Stability | <3% |
| Total System Power Consumption | <63 W |
| Operating Temperature | 10–40 °C |
| Laser Head Dimensions (L×W×H) | 125 × 70 × 45 mm |
| Controller Dimensions (L×W×H) | 190 × 72 × 28 mm |
| Communication Interface | RS-232 or USB |
| Warranty | 12 months |
| Brand | Cobolt |
|---|---|
| Origin | Sweden |
| Model | NewOpto |
| Wavelength | 1064 nm / 532 nm / 355 nm |
| Pulse Energy | 30–150 μJ |
| Repetition Rate | >7 kHz |
| Pulse Width | <5 ns |
| Peak Power | >6 kW to >30 kW |
| Average Power | >0.2 W to >1.0 W |
| Pulse-to-Pulse Jitter | <1 μs |
| Polarization Extinction Ratio | Vertical, >100:1 |
| Beam Profile | TEM₀₀, M² < 1.2–1.3 |
| Beam Symmetry | >1:0.80–0.90 |
| Warranty | 12 months |
| Brand | Cobolt |
|---|---|
| Origin | Sweden |
| Model | Cobolt Samba (532 nm) |
| Wavelength | 532 ± 0.3 nm |
| Output Power Options | 25, 50, 100, 120, 240 mW |
| Rise/Fall Time | <300 ns |
| Modulation Bandwidth | 3 MHz |
| Extinction Ratio | >30 dB |
| Operating Temperature | 10–40 °C |
| Max Laser Head Baseplate Temperature | 50 °C |
| Laser Head Dimensions | 137 × 60 × 45 mm |
| Controller Dimensions | 190 × 72 × 28 mm |
| Communication Interface | RS-232 or USB |
| Warranty | 24 months |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 3B Laser Product |
| OEM Mode Support | Auto-start enabled |
| Included | Cobolt 04-01 series laser head, integrated AOM driver, interconnect cables |
| Excluded | External signal generator |
| Origin | Sweden |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Series | Cobolt Zouk / Calypso / Samba / Jive / Flamenco / Rumba |
| Core Technology | Solid-State Diode-Pumped Single-Longitudinal-Mode (SLM) Lasers |
| Wavelength Range | 355–1064 nm |
| Spectral Linewidth | <1 MHz (<0.01 pm) |
| Spatial Mode | TEM₀₀, M² < 1.1 |
| Power Stability (8 h) | <2% |
| Beam Pointing Stability | <10 µrad/°C (typ. 5 µrad/°C) |
| Polarization Ratio | >100:1 |
| Max Head Baseplate Temp | 50°C |
| Recommended Heat Sink Thermal Resistance | 0.2 K/W |
| Controller Interface | RS-232 or USB |
| Warranty | 24 months (Samba/Jive/Flamenco/Rumba), 12 months (Zouk/Calypso) |
| Brand | Cobolt |
|---|---|
| Origin | Sweden |
| Model | Cobolt |
| Wavelength Options | 473 nm, 491 nm, 515 nm, 532 nm, 561 nm, 594 nm |
| Max Output Power (Fiber-Coupled) | 35–150 mW |
| Fiber Type | 1 m Single-Mode or Polarization-Maintaining Fiber, 3 mm Jacket, NA < 0.12 |
| Polarization Extinction Ratio | > 100:1 |
| Output Connector | FC/APC (non-collimated, OEM-customizable) |
| Power Stability (8 h, ±3°C) | < 3% |
| Intensity Noise | Equivalent to Free-Space Version |
| Total System Power Consumption | < 35 W (typ. < 15 W) |
| Operating Temperature | 10–40 °C |
| Max Laser Head Baseplate Temp. | 50 °C |
| Laser Head Dimensions | 117 × 60 × 45 mm |
| Controller Dimensions | 192 × 72 × 28 mm |
| Communication Interface | RS-232 |
| Safety Compliance | CDRH-compliant (key-switch or auto-start variants) |
| Brand | Cobolt |
|---|---|
| Origin | Sweden |
| Model | Cobolt THCure Series |
| Wavelength | 640 nm / 660 nm |
| Output Power (Fiber-Coupled) | ≤75 mW |
| Spatial Mode | TEM₀₀, M² = 1.1 |
| Mode Field Diameter (MFD) | 4.5 µm |
| Spectral Linewidth (FWHM) | <1.2 nm |
| Polarization Ratio | >100:1 |
| Relative Intensity Noise (RIN, 250 Hz–2 MHz) | <0.2% (rms) |
| Power Stability (8 h) | <0.5% |
| Modulation | Digital (DC–150 MHz), Analog (DC–2 MHz), Remote ON/OFF (DC–500 kHz) |
| Rise/Fall Times | <2.5 ns (digital), <200 ns (analog), <500 ns (ON/OFF) |
| Operating Baseplate Temperature | ≤50 °C |
| Total Power Consumption | <10 W |
| Fiber Type | 1 m single-mode or polarization-maintaining fiber with 3 mm jacketing |
| Numerical Aperture | 0.09 |
| Output Connector | FC/APC (non-collimated) |
| Communication Interface | RS-232 and USB |
| Warranty | 12 months |
| Brand | Cobolt |
|---|---|
| Origin | Sweden |
| Laser Type | Diode-Pumped Solid-State (DPSS) |
| Wavelength Range | 355–1064 nm |
| Spectral Linewidth | <1 MHz (<0.001 pm) |
| Spatial Mode | TEM₀₀, M² < 1.1 |
| Beam Pointing Stability | <10 µrad/°C (typ. 5 µrad/°C) |
| Polarization Ratio | >100:1 |
| Operating Temperature | 10–40 °C |
| Laser Head Dimensions | 103×60×40 mm (04-01 series) or 125×70×45 mm (05-01 series) |
| Controller Dimensions | 190×72×28 mm |
| Communication Interface | RS-232 or USB |
| Warranty | 24 months (12 months for Zouk model) |
| Brand | GRINTECH |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | CobriteMX Laser Host Frame |
| Core Components | Solid-State Laser Systems and Integrated Mounting Architecture |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Structural Material | Aerospace-grade anodized aluminum alloy (6061-T6) |
| Thermal Stability | ≤ ±1.2 µm/°C over operational range (15–30 °C) |
| Modularity | Compatible with standard 25 mm and 50 mm optical rail systems |
| Vibration Damping | Integrated elastomeric isolation feet (resonant frequency < 8 Hz) |
| Brand | CODIXX |
|---|---|
| Origin | Germany |
| Product Type | Dichroic Glass Polarizer |
| Substrate | High-Strength Soda-Lime Glass with Embedded Silver Nanoparticles |
| Typical Average Transmission (IR Range) | 96% |
| Typical Extinction Ratio | 10,000:1 |
| Optional AR Coating | Available for Minimized Reflection Losses |
| Custom Thicknesses/Shapes | Available on Request |
| Compliance | ISO 9001 Manufacturing Environment |
| Regulatory Note | Designed for Use in Class 1 Laser Systems per IEC 60825-1 |
| Brand | CODIXX |
|---|---|
| Origin | Germany |
| Product Line | colorPol® Standard Series |
| Substrate Material | High-Strength Soda-Lime Glass with Embedded Silver Nanoparticles |
| Transmission Range | 250 nm – 5000 nm (UV to MWIR) |
| Max. Transmission (UV) | ~60% @ 350 nm |
| Max. Transmission (VIS) | >90% @ 550 nm |
| Max. Transmission (IR) | up to 94% @ 3000 nm |
| Extinction Ratio | ≥10⁴:1 (typical, dependent on wavelength and incidence angle) |
| Operating Temperature Range | −40 °C to +120 °C |
| Damage Threshold | 500 MW/cm² (ns pulsed, 1064 nm), 10 kW/cm² (CW, 1064 nm) |
| Surface Quality | 40–20 scratch-dig |
| Parallelism | <1 arcmin |
| Thickness Tolerance | ±0.05 mm |
| Brand | codixx |
|---|---|
| Model | sensSERS |
| Substrate Material | Ag Nanoparticle-Functionalized Schott B270® Glass |
| Dimensions | 4 mm × 4 mm × 1.2 mm (customizable) |
| Active Area | 4 mm × 4 mm (both sides usable) |
| Packaging Options | 4 / 9 / 16 / 25 / 36 / 49 substrates per box |
| Recommended Excitation Wavelengths | 488–785 nm |
| Storage Stability (after vacuum seal opening) | 6 months |
| Cleaning Method | Methanol ultrasonication |
| Handling | Tweezer-only, non-contact surface protocol |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | COH-300A |
| Pricing | Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | COH400 |
| Pricing | Available Upon Request |
| Brand | Coherent |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Genesis CX Series |
| Core Technology | All-Solid-State, DPSS (Diode-Pumped Solid-State), TEM₀₀ |
| Wavelength | 488 nm |
| Laser Type | Continuous Wave (CW) |
| Output Stability | <0.5% RMS over 8 hours |
| Beam Quality | M² < 1.1 |
| Polarization | Linear, >100:1 |
| Cooling | Air-Cooled |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 |
| Brand | Coherent |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | OBIS FP Series |
| Wavelength | 405 nm |
| Output Type | Fiber-Coupled (Single-Mode, FC/PC or FC/APC connector) |
| Laser Medium | Diode-Pumped Solid-State (DPSS) |
| Operating Mode | Continuous Wave (CW) |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 |
| Cooling | Conduction-cooled |
| Control Interface | Analog 0–5 V / TTL modulation, USB 2.0 (optional), RS-232 (optional) |
| Brand | Coherent |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | OBIS Series |
| Core Technology | Diode-Pumped Solid-State (DPSS) Laser |
| Wavelength | 375 nm |
| Output Type | Continuous Wave (CW) |
| Form Factor | OEM-integrated Benchtop Module |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 |
| Brand | Coherent |
|---|---|
| Origin | USA |
| Model | Sapphire LP Series |
| Wavelength | 561 nm |
| Laser Type | Diode-Pumped Solid-State (DPSS) Continuous-Wave (CW) Laser |
| Output Stability | <0.5% RMS over 8 hours |
| Beam Diameter (1/e²) | ~0.8 mm |
| Beam Divergence | <1.5 mrad |
| Polarization Extinction Ratio | >100:1 |
| Cooling | Air-cooled |
| Operating Temperature | 15–30 °C |
| Warm-up Time | <5 min to specification |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 81200-15 |
| Product Type | Automated Polarimeter |
| Temperature Control | None |
| Display | Backlit Color LCD |
| Light Source | LED with 589 nm filter |
| Sample Tube Options | 100 mm and 200 mm included |
| Data Storage | Last 30 measurements |
| Interface | RS-232 |
| Calibration Method | Quartz plate or reference standard |
| Compliance | Designed for GLP-compliant environments |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 81250-10 |
| Product Type | Automatic Polarimeter |
| Temperature Control | Yes (external probe) |
| Digital Display | Yes |
| Light Source | LED with interference filter (589.3 nm) |
| Optical Path Diameter | 4 mm |
| Sample Cell Length Range | 20–220 mm |
| Optical Density Range | 0.0–3.0 OD |
| Angular Measurement Range | −355° to +355° |
| ISS Scale Range | −225°Z to +225°Z |
| Angular Resolution | 0.01° / 0.001° (selectable) |
| ISS Resolution | 0.01°Z / 0.001°Z (selectable) |
| Repeatability | ±0.002° (angle), ±0.005°Z (ISS) |
| Accuracy | ±0.01° (angle), ±0.03°Z (ISS) |
| Measurement Time | 4–30 s (adjustable) |
| Operating Temperature Range | 5–40 °C |
| Temperature Compensation Modes | None / Sucrose / Quartz / User-defined |
| Display Languages | English, French, Spanish, German |
| Interface | Dual RS-232 ports, parallel printer port |
| Power Supply | 90–250 VAC, 50–60 Hz |
| Origin | Shenzhen, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | CS-580A |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Form Factor | Portable |
| Optical Geometry | d/8° Integrating Sphere |
| Illuminant Configuration | D/8 (Diffuse Illumination, 8° Viewing Angle) |
| Spectral Range | 400 nm – 700 nm |
| Repeatability | ΔE*ab ≤ 0.08 |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | COLOSUS |
| Price Range | USD 7,000 – 14,000 |
| Brand | COMECAUSE |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Type | Portable |
| Measurement Range | 0.05–100 NTU |
| Operating Temperature | 0–50 °C |
| Wavelength Range | 340–800 nm |
| Measurement Principle | Nephelometric (90° scattered light detection) |
| Accuracy | ≤5% FS |
| Repeatability | <0.5% |
| Stability | <0.5% |
| Light Source | Imported Cold LED (Lifespan ≥100,000 h) |
| Display | 3.5-inch Color TFT Touchscreen |
| Data Storage | >80,000 Records |
| Connectivity | USB Type-C, Wi-Fi, Bluetooth, Hotspot |
| Power | 5 V DC / 5600 mAh Li-ion Battery (12 h continuous operation) |
| Dimensions | 180 × 80 × 70 mm |
| Weight | 700 g |
| Compliance | GB/T 13200–1991, ISO 7027:2016 (Nephelometric Method) |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | V2 |
| Price | USD 138,000 (FOB) |
| Brand | ConOptics |
|---|---|
| Origin | USA |
| Model | M370 |
| Crystal Type | ADP |
| Half-Wave Voltage @ 500 nm | 184 V |
| Aperture Diameter | 2.5 mm |
| Contrast Ratio @ 633 nm / 1064 nm | 500:1 / N/A |
| Length with Polarizer | 158 nm |
| Modulation Geometry | Transverse |
| Operating Wavelength Range | 240–800 nm |
| Drive Compatibility | Analog or Digital Amplifiers (e.g., 25A, 25D, 302RM) |
| Primary Function | Intensity Modulation (configurable as Phase Modulator or Variable Waveplate) |
| Compliance | Designed for integration into laser systems requiring high extinction ratio and low-drive-voltage operation |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | Cordouan Arago ∞ |
| Quotation | Upon Request |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model Series | Arago ε, Arago ω, Arago ∞ |
| Product Type | Benchtop Refractometer |
| Temperature Control | Peltier-regulated (15–65 °C for ε |
| Digital Display | Yes (high-resolution capacitive touchscreen + PC interface) |
| Refractive Index Range (nD) | 1.25–1.51 or 1.51–1.75 (ε) |
| Resolution (nD) | ±0.00001 (ε, ω), ±0.000001 (∞) |
| Accuracy (nD) | ±0.0001 (ε), ±0.00005 (ω), ±0.00001 (∞) |
| Wavelength | 635 nm (ε), 658 nm (ω, ∞) |
| Prism Material | BK7 glass (ε), fused silica (ω), sapphire (∞) |
| Sample Cell Material | 316 stainless steel or Inconel® alloy (optional) |
| Brix Range | 0–95 % w/w |
| Brix Accuracy | ±0.002 % |
| Repeatability | ±0.01 % |
| Light Source | Integrated temperature-stabilized laser diode |
| Dimensions (W×D×H) | 10 × 24 × 27 cm |
| Weight | 8 kg |
| Interface | USB 2.0 (bidirectional PC communication) |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Arago ε |
| Quotation | Upon Request |
| Measurement Principle | Critical Angle Determination via Total Internal Reflection |
| Measuring Range (nD) | 1.25–1.51 or 1.51–1.75 |
| Resolution (nD) | ±0.00001 |
| Accuracy (nD) | ±0.0001 |
| Temperature Control | Peltier-Regulated, Ambient to 65 °C |
| Prism Material | BK7 Optical Glass |
| Wavelength | 635 nm |
| Light Source | Stabilized Laser Diode with Integrated Peltier Thermal Management |
| Sample Cell Material Options | 316 Stainless Steel or Inconel Alloy |
| Interface | USB (Bidirectional PC Communication) |
| Power Supply | 100–240 V AC, 50/60 Hz, 10–50 W |
| Dimensions | 10 × 24 × 27 cm |
| Weight | 8 kg |
| Software Language | English or French |
| Compliance | Designed for GLP/GMP environments |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Cordouan-Arago ε Refractometer |
| Quotation | Upon Request |
| Measurement Principle | Critical Angle Refraction at Prism-Sample Interface |
| Measuring Range (nD) | 1.25–1.51 or 1.51–1.75 |
| Resolution (nD) | ±0.00001 |
| Accuracy (nD) | ±0.0001 |
| Temperature Control | Peltier-Regulated, Ambient to 65 °C |
| Prism Material | BK7 Optical Glass |
| Wavelength | 635 nm |
| Light Source | Stabilized Laser Diode with Integrated Peltier Thermal Management |
| Sample Cell Material Options | 316 Stainless Steel or Inconel® Alloy |
| Interface | USB 2.0 (Bidirectional PC Communication) |
| Power Supply | 100–240 V AC, 50/60 Hz, 10–50 W |
| Dimensions (L×W×H) | 10 × 24 × 27 cm |
| Weight | 8 kg |
| Display & Control | Touchscreen Interface or PC-Based Software (English/French) |
| Brix Range | 0–95 % w/w, Uncertainty: ±0.002 %, Repeatability & Accuracy: ±0.01 % |