Other Common Laboratory Equipment
Filter
Showing 241–270 of 1883 results
| Brand | French BROT-LAB |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Equipment |
| Model | 1 22 12 |
| Pricing | Upon Request |
| Brand | French BROT-LAB |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 1.22.11 |
| Power Supply | 400 V, 3-phase, 50/60 Hz |
| Spindle Motor | 0.55 kW |
| Pump Motor | 150 W (recirculation only) |
| Spindle Speeds | 12 adjustable steps from 150 to 2,840 rpm |
| Core Diameter Range | Ø4 mm to Ø100 mm |
| Maximum Core Depth | 115 mm |
| Table Dimensions | 600 × 300 × 250 mm |
| Table Tilt Range | ±45° |
| Cooling Media | Water, oil, or liquid nitrogen (optional integrated recirculation system) |
| Drill Bit Internal Diameter | 1" (optional: 1.5", 2", 3", 4", or custom) |
| Noise Level | <70 dB(A) |
| Standard Accessories | Dual-clamp fixture, tilting table, safety guard |
| Optional Accessories | Integrated sediment-recycling water system, liquid nitrogen cooling module |
| Brand | Bruker |
|---|---|
| Origin | Germany |
| Model | CUBE |
| Form Factor | Monolithic ASIC |
| Operating Modes | Pulse-reset and continuous-reset (externally configurable) |
| Input Capacitance Options | Multiple variants available (e.g., 0.1–5 pF range) |
| Power Consumption | 6–60 mW (configurable per variant) |
| Rise Time (detectorless) | 7 ns |
| Die Dimensions | 750 µm × 750 µm × 250 µm |
| Output Drive Capability | Low-impedance, suitable for long interconnects |
| Target Detectors | Silicon Drift Detectors (SDD), PIN diodes, Si(Li), CdTe, CZT, and other solid-state radiation sensors |
| Brand | Bruker |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | minispec Automation |
| Pricing | Upon Request |
| Brand | Bruker |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SmartProber TT |
| Pricing | Available Upon Request |
| In-Plane Magnetic Field | Up to 48 kA/m (0.6 kOe) |
| Sample Stage | Manual X/Y Translation, 150 mm × 150 mm Clear Aperture |
| Maximum Sample Size | 150 mm (6″) diameter, ≤1.3 mm thickness |
| RA Range | 0.5–100 kΩ·µm² |
| Brand | Bruker |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | SmartProber-P1 |
| Magnetic Field Configuration | 6 kOe vertical-field permanent magnet |
| Wafer Handling | Motorized 300 mm rotating wafer stage |
| TMR Resistance-Area Product Range | 0.1–100 kΩ·µm² |
| Optional Modules | In-plane 2 kOe magnet (C), 200 mm XY stage (Y), Manual sample stage (M), 10 kOe vertical magnet (L) |
| Origin | United Kingdom |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | BS15 |
| Pricing | Available Upon Request |
| Brand | KJ GROUP (Shenyang Kejing) |
|---|---|
| Origin | Liaoning, China |
| Model | BT-2800 |
| Measurement Principle | Sheath-flow assisted high-speed dynamic imaging |
| Particle Size Range | 4–400 µm |
| Repeatability Error | ≤1% (D₅₀, GB standard reference material) |
| Accuracy Error | ≤1% (D₅₀, GB standard reference material) |
| Particle Recognition Speed | ≥10,000 particles/min |
| Imaging Frame Rate | 120 fps (CCD) |
| Optical Magnification | 150×–1000× |
| Resolution | ≤0.5 µm |
| Light Source | High-intensity LED point source |
| Output Data | Raw images, size distribution, shape descriptors (aspect ratio, circularity), cumulative/differential plots, equivalent diameters (e.g., Feret, Martin, projected area), interval content, D₁₀/D₅₀/D₉₀, Max particle size |
| Sample Preparation | Integrated stirring & ultrasonic dispersion |
| Fluidics | Sheath-flow hydrodynamic focusing with precision piston pump |
| Image Processing | Real-time particle segmentation, de-agglomeration algorithm for touching/overlapping particles |
| Compliance Support | ASTM E2457 (image-based particle characterization), ISO 13322-2:2013, USP <429>, GLP-compliant audit trail logging (via optional software module) |
| Key | Brand: BETTER (KJ Group) |
|---|---|
| Origin | Liaoning, China |
| Model | BT-9300ST |
| Measurement Range | 0.1–1000 µm |
| Repeatability Error | ≤1% (D50, GB Standard Reference Material) |
| Accuracy Error | ≤1% (D50, GB Standard Reference Material) |
| Measurement Principle | Mie Scattering Theory |
| Sampling Rate | 3500 Hz |
| Measurement Time | ≤10 s |
| Optical System | Dual-lens with Auto-alignment |
| Detector Channels | 86 |
| Laser Source | Imported Semiconductor Laser |
| Circulation Tank Volume | 600 mL |
| Ultrasonic Power | 50 W |
| Flow Rate | 3000–8000 mL/min |
| Operating System | Windows XP/7/8/10 |
| Interface | USB 2.0/3.0 |
| Dew Point Monitoring | Integrated |
| Dimensions | 660 × 420 × 320 mm |
| Weight | 38 kg |
| Brand | Burkard |
|---|---|
| Origin | United Kingdom |
| Model | HIRST |
| Sampling Area | 0.89 m² |
| Airflow Rate | 10 L/min |
| Drum Rotation Speed | 2 mm/hour |
| Standard Orifice | 2 × 14 mm |
| Height | 940 mm |
| Net Weight | 16 kg |
| Gross Weight | 33 kg |
| Packing Dimensions | 57 × 65 × 65 cm |
| Power Options | Mains, Rechargeable Battery, or Hybrid Supply |
| Bearing System | 7-Jewel Precision Clockwork Mechanism |
| Collection Substrate | Adhesive-Coated Polyester Tape (25 m roll) |
| Continuous Unattended Operation | Up to 7 Days |
| Sampling Modes | 24-Hour Continuous or Timed Intervals |
| Brand | Burkard |
|---|---|
| Origin | United Kingdom |
| Model | Hirst-1 |
| Sampling Duration | 7 days (standard), optional 24-hour mode |
| Airflow Rate | 10 L/min |
| Orifice Dimensions | 2 mm × 14 mm |
| Drum Advancement | 2 mm/h |
| Clock Mechanism | Precision 7-jewel bearing movement |
| Sampling Surface | Adhesive polyester tape (200 mm standard scale) |
| Height | 94 cm |
| Sampling Radius | 53 cm |
| Sampling Area | 0.882 m² |
| Power Supply | 12 VDC, 240 VAC 50 Hz, or 110 VAC 60 Hz |
| Net Weight | 16 kg |
| Total Shipping Weight | 30 kg |
| Package Dimensions | 60 × 70 × 80 cm |
| Construction | Anodized aluminum housing with enamel-coated steel components |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MEI0001 |
| Pricing | Upon Request |
| Origin | UK |
|---|---|
| Manufacturer | Burkard Manufacturing Co. Ltd. |
| Model | PDE0006 |
| Power Input | 250 V AC–12 V DC or 110 V AC–12 V DC |
| Maximum Dispense Volume | 350 µL |
| Dimensions (W×D×H) | 230 × 350 × 130 mm |
| Micrometer Base Dimensions | 230 × 230 × 130 mm |
| Net Weight | 4.5 kg |
| Gross Weight | 6.5 kg |
| Dispense Range (1 mL syringe) | 0.1–1.0 µL (10-step), extendable to 1.0–10.0 µL with 10 mL syringe & adapter |
| Actuation | Manual lever + foot switch / ring switch / finger switch |
| Syringe Type | Burkard all-glass precision micrometer syringe |
| Needle | 0.3 mm × 25 mm (3/10″ × 25 mm) subcutaneous stainless steel needle |
| Construction | Non-ferrous materials |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PDE0012 |
| Pricing | Upon Request |
| Brand | Burkard |
|---|---|
| Origin | United Kingdom |
| Model | Spore Watch |
| Sampling Duration Options | 1–24 hr (1 hr increments), 2–7 days (1 day increments) |
| Airflow Rate | 10 L/min |
| Orifice Dimensions | 2 mm × 14 mm |
| Drum Advancement | 2 mm/hr (full 7-day cycle) |
| Sampling Surface Area | 0.882 m² (drum radius: 53 cm) |
| Power Supply | 12 V DC (AC adapter, rechargeable battery, or solar panel compatible) |
| Net Weight | 3.5 kg |
| Dimensions (L×W×H) | 240 × 100 × 550 mm |
| Drum Capacity | 200 standard microscope slides |
| Compliance | Fully compatible with Hirst-type spore trapping methodology per ISO 21527-1:2008 and EN 16814:2017 |
| Brand | Burkard |
|---|---|
| Origin | United Kingdom |
| Model | SPOREWATCH |
| Sampling Duration Options | 1, 3, 6, 9, 12, 15, 18, 21, 24 hours |
| Drum Translation Rate | 2 mm/h (over 7-day cycle) |
| Airflow Rate | 10 L/min (nominal) |
| Orifice Dimensions | 2 mm × 14 mm |
| Sampling Tape Width | 200 mm (standard) |
| Effective Sampling Area | 0.882 m² (radius: 53 cm) |
| Power Supply | 12 V DC (AC adapter, rechargeable battery, or solar panel compatible) |
| Net Weight | 3.5 kg |
| Dimensions (L×W×H) | 240 × 100 × 550 mm |
| Enclosure | Lockable control housing and sample chamber |
| Mounting Options | Tripod, wall bracket, or mast-mounted configurations |
| Environmental Monitoring Integration | Optional temperature and relative humidity logging module |
| Brand | Burkard |
|---|---|
| Origin | United Kingdom |
| Model | Univac |
| Vacuum Pressure | 180 mmHg |
| Airflow Velocity (at 6 cm diameter inlet) | 300 km/h |
| Dimensions | 38 cm × 25 cm × 50 cm |
| Net Weight | 11.34 kg |
| Fuel Tank Capacity | 1.25 L |
| Power Source | JLO 35 two-stroke gasoline engine (self-powered) |
| Brand | Burkard |
|---|---|
| Origin | United Kingdom |
| Model | EA0001 |
| Air Throughput | 10.5 m³/min (370 CFM) |
| Weight | 7.8 kg (17.2 lb) |
| Height | 930 mm |
| Sampling Area | 0.2 m² (2.2 ft²) |
| Brand | 1 mK |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Buzz-Mac |
| Price | USD 1 (FOB) |
| Brand | CactuX |
|---|---|
| Model | Battery BOX |
| Origin | Czech Republic |
| Temperature Range | –30 °C to +60 °C |
| Max Current | 30 A |
| Sample Compatibility | Cylindrical cells (bare, no plastic casing) |
| Dimensions (L×W×H) | 200 mm × 200 mm × 405 mm |
| Weight | 4.25 kg (excluding control unit) |
| Power Input | 230 V AC |
| Brand | CactuX |
|---|---|
| Origin | Czech Republic |
| Model | Thermal BOX |
| Temperature Range | –30 °C to +60 °C |
| Accuracy | ±1 °C |
| Sample Chamber | Ø65 × 35 mm (customizable) |
| Dimensions (stage only) | 200 × 200 × 405 mm |
| Weight (stage only) | 4.25 kg |
| Power Supply | 230 V AC |
| Brand | Catalyst |
|---|---|
| Origin | USA |
| Distributor Type | Authorized Distributor |
| Product Category | Imported Laboratory Equipment |
| Model Series | FH10, FH15, FH30, FH100, FH100X, FH100D, FH100DX, Multichannel Cartridge Systems |
| Flow Range | 0.5–4000 mL/min (single-channel, FH100D/FH100DX) |
| Speed Range | 4–400 rpm (FH100D/FH100DX) |
| Tubing ID Compatibility | 0.16–6.4 mm (model-dependent) |
| Pump Head Replacement Time | ≤30 seconds |
| Occlusion Control | Fixed-angle, adjustable occlusion on multichannel cartridges |
| Motor Type | Brushed DC, reversible |
| Enclosure | Epoxy-coated steel (FH15/FH30), anodized aluminum housing (FH100 series) |
| Display | Multi-line LCD (FH100D/FH100DX) |
| Programming Languages | 7 selectable (FH100D/FH100DX) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Asia-Pacific |
| Model | Ce-tech C0S Series |
| Pricing | Contact for Quotation |
| Brand | Zhongjiao Jinyuan |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CEHF-300 |
| Power Input | 220 V AC, 50 Hz |
| Max. Power Consumption | 150 W (standard), 180 W (peak) |
| Operating Temperature | 0–40 °C |
| Relative Humidity | <85% RH |
| H₂ Purity | 99.999% (v/v, O₂-equivalent basis) |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0.4 MPa (adjustable upon factory configuration) |
| Dimensions | 5U rack-mount form factor |
| Weight | ~12 kg |
| Key | Brand: CECO |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | CEHL |
| Power Input | 220 V, 50 Hz |
| Max Power Consumption | 150 W / 180 W (model-dependent) |
| Operating Temperature | 0–40 °C |
| Relative Humidity | <85% RH |
| H₂ Purity | 99.999% (v/v, O₂-equivalent basis) |
| Flow Rate | CEHL-300: 0–300 mL/min |
| CEHL-500 | 0–500 mL/min |
| Output Pressure | 0.4 MPa (custom pressure available upon factory configuration) |
| Dimensions (L×W×H) | 370 × 180 × 360 mm |
| Weight | CEHL-300: ~12 kg |
| CEHL-500 | ~13 kg |
| Brand | CEL (Zhongjiao Jinyuan) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Producer |
| Origin Category | Domestic (China) |
| Model | CEL-CPE50 |
| Price | USD 845 (converted from ¥5976 at 1 USD ≈ ¥7.07) |
| Body Material | UV-Grade Fused Quartz |
| Dimensions | 50 × 50 × 50 mm |
| Optical Configuration | Four-Sided Illumination |
| Transmission Range | 190–2500 nm |
| Electrode Compatibility | Three-Electrode System (WE/CE/RE) |
| Optional Features | PTFE Sealing Cap, Gas Inlet/Outlet Ports, Inert Atmosphere Purging |
| Brand | CEAULIGHT (Zhongjiao Jinyuan) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | CEL-CPS |
| Pricing | Upon Request |
| Inlet Pressure | <6 MPa (optional upgrade to 10 MPa) |
| Inlet Ports | 2 independent, electrically actuated for automatic switching |
| Outlet Pressure | <0.6 MPa |
| Outlet Ports | 2 dedicated channels (one for GC coupling, one for high-flow venting) |
| Flow Control | U.S.-sourced Dwyer digital flow meter with ±1% FS accuracy |
| Valves & Fittings | U.S.-imported ANLOK® stainless steel compression fittings and solenoid valves |
| Dimensions (W×H×D) | 300 × 410 × 186 mm |
| Brand | CEL (Zhongjiao Jinyuan) |
|---|---|
| Model | CEL-CWKT |
| Origin | Beijing, China |
| Manufacturer | Zhongjiao Jinyuan Co., Ltd. |
| Type | Domestic Laboratory Temperature Control Platform |
| Temperature Range Options | (1) –10 °C to 95 °C |
| Temperature Stability | ±0.1 °C |
| Circulating Medium Volume | 500 mL |
| Max Operating Pressure | 0.6 MPa |
| Power Input | 200–240 V AC, 50–60 Hz, 150 W |
| Built-in Magnetic Stirring | Up to 1500 rpm |
| Display | LCD with dual-channel readout (setpoint temperature & vessel temperature, both resolved to 0.1 °C) |
| Compatible Reactor Series | CEL-HPR100T, CEL-MPR100/KPR100, CEL-HPR250T, CEL-MPR250/KPR250, CEL-HPR250S, HPRS-PEC250 |
| Optional External Chillers | HX105 (–10 °C to 95 °C), CH-3012S (–30 °C to 200 °C) |
| External Dimensions (L×W×H) | 245 × 239 × 235 mm |
| Brand | CEL (Zhongjiao Jin Yuan) |
|---|---|
| Model | CEL-GDT-12 |
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Inlet | 1 × 3 mm GB standard port (2 pcs) with integrated pressure regulator valve |
| Outlet | 12 independently controllable ports |
| Port Fitting | 1/16″ PEEK female union (8 mm to 1/16″, 12 pcs) |
| Tubing | 1 m × 12 pcs of 1/16″ PEEK tubing |
| Valves | 6 × U.S.-sourced Anlok stainless steel needle valves, 2 × Anlok stainless steel ball valves |
| Vacuum Interface | Integrated venting ball valve to prevent backflow of vacuum pump oil |
| Flow Control | Dwyer glass-tube rotameters (U.S.-imported) |
| Pressure Range | –0.1 to +0.3 MPa (gauge/vacuum) |
| Vacuum Compatibility | Designed for integration with external vacuum pumps and optional electromagnetic isolation valves |
| Compliance | Compatible with ASTM E2500, ISO/IEC 17025 workflows requiring traceable gas handling |