Physical Property Testing Instruments
Filter
Showing 9481–9510 of 12279 results
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | RT100 |
| Sample Capacity | ≤ 30 L |
| Number of Subsamples | 2 |
| Adjustable Groove Width | 12–108 mm (in 12-mm increments) |
| Dimensions (W×H×D) | 72 × 70 × 46 cm |
| Net Weight | ~55 kg |
| Compliance | DIN 51701 |
| Power Requirement | None (manual operation) |
| Brand | Revealer |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | RDIC-3D |
| Pricing | Available Upon Request |
| Camera Resolution | 20 MP (per camera) |
| Configuration | Dual high-resolution cameras, hardware synchronization controller, calibration target, proprietary DIC software suite, dedicated graphics workstation |
| Measurement Capability | Full-field 3D coordinates, quasi-static displacement, and strain tensors (εₓₓ, εᵧᵧ, ε_zz, γₓᵧ, γ_yz, γ_zx) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RH-200 Relative Humidity Generator |
| Price | Upon Request |
| RH Range | 3–95% RH |
| RH Control Accuracy | ±1.0% RH |
| Temperature Control Range | Ambient to 50 °C |
| Dew Point Range | −25 °C to 50 °C |
| Standard Flow Rate | 500 mL/min (Optional High-Flow: up to 5 L/min) |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | RH-I |
| Price | Upon Request |
| Heating Power | 600 W |
| Max Operating Temperature | 900 °C (1100 °C transient) |
| Temperature Resolution | 0.1 °C |
| Micrometer Drum Resolution | 0.01 mm |
| Heating Rate Control | 5 ± 1 °C/min |
| Timing Accuracy | 0.1 s |
| Brand | RHEO FILAMENT |
|---|---|
| Origin | Denmark |
| Model | VADER 1000 |
| Instrument Type | Filament Stretching Rheometer |
| Bearing Type | Mechanical |
| Minimum Axial Speed | 0.001 mm/s |
| Maximum Axial Speed | 600 mm/s |
| Max Hencky Strain | 9 |
| Min Strain Rate | 0.0001 s⁻¹ |
| Max Strain Rate | 5 s⁻¹ |
| Min Measurable Stress | 15 Pa |
| Max Measurable Stress | 1×10¹⁰ Pa |
| Sample Diameter Range | 0.1–10 mm |
| Temperature Range | Ambient to 250 °C (±0.1 °C) |
| Optional Convection Oven Flow Rate | 5 L/min |
| Recommended Minimum Sample Viscosity | 1000 Pa·s |
| Brand | RheoSense |
|---|---|
| Origin | USA |
| Model | Initium |
| Instrument Type | Portable Microfluidic Viscometer |
| Viscosity Range | 0.2–2000 cP |
| Temperature Range | 4–70 °C |
| Sample Volume per Measurement | <5 µL |
| Shear Rate Range | Up to 10⁶ s⁻¹ |
| Compliance | ASTM D2196, ISO 2555, USP <911> |
| Brand | RHEOTECH |
|---|---|
| Origin | Japan |
| Model | FUDOH RTC-3002D |
| Load Capacity | ±200 N |
| Stroke Range | 0.1–99.9 mm (0.1 mm resolution) |
| Test Speed Options | 2, 5, 6, 10, 20, 30 cm/min or 5, 6, 10, 20, 30, 60 cm/min |
| Display | Triple 3-digit LED (force, displacement, time) |
| Auto-zero Function | Yes |
| Power Supply | 220–250 V AC, 50/60 Hz |
| Dimensions | 260 W × 430 H × 280 D mm |
| Weight | 15 kg |
| Compliance | Designed for ISO 11357, ASTM F3165, USP <1043>, and GLP-compliant texture analysis workflows |
| Brand | RHK |
|---|---|
| Origin | USA |
| Model | PAN STM/AFM |
| Operating Modes | STM & Non-Contact AFM |
| Temperature Range | <300 mK, Room Temperature (RT), Variable Temperature (VT), High Temperature (HT) |
| X-Y-Z Coarse Motion Range | 5 mm × 5 mm × 10 mm |
| Scan Range (RT) | 5 µm × 5 µm |
| Sample Size Capacity | 10 mm × 10 mm |
| Scanner Dimensions | 40 mm × 70 mm |
| Vibration Damping | Integrated Spring & Eddy-Current Damping System |
| Compatibility | Flow-type & Bath-type Cryostats, Superconducting Magnets, UHV Systems |
| Controller | RHK R9 Full-Digital SPM Controller with IVP-R9 Preamp |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | DSC-XRD |
| Configuration | θ–θ goniometer geometry |
| Coupling Type | Synchronized in-situ DSC–XRD |
| Atmosphere Control | Programmable gas environment (N₂, Ar, air, O₂) |
| Temperature Range | RT to 1200 °C (DSC sensor dependent) |
| X-ray Source | Cu Kα (standard), optional Mo or Co anodes |
| Detector | High-speed 1D/2D pixel array detector (e.g., HyPix-400) |
| Data Synchronization | Sub-second temporal alignment of thermal and diffraction signals |
| Key | Brand: Rigaku |
|---|---|
| Origin | Japan |
| Model | DSC8231 |
| Temperature Range (Standard) | RT to 1100 °C |
| Temperature Range (High-Temp Option) | RT to 1500 °C |
| Sample Observation Range | Ambient to 1000 °C |
| Furnace Configuration | Horizontal dual-compartment |
| Balance Type | Horizontal differential triple-coil balance |
| Control Modes | Stepwise Isothermal Analysis (SIA), Constant Rate Control (CRC), Sample-Controlled TG (SCTG) |
| Dimensions (Core Unit) | 350 × 310 × 669 mm (W × H × D) |
| Weight (Core Unit) | 28 kg |
| Power Supply | 1Ø, AC 100–120 V / 200–240 V, 50/60 Hz, 15 A |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Instrument Type | DSC |
| Temperature Range | Ambient to 1500 °C |
| Manufacturer Status | Authorized Distributor (Non-OEM) |
| Origin Category | Imported Instrument |
| Model | DSC8271 |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Instrument Type | DSC |
| Temperature Range | −170 °C to 725 °C |
| Configuration | Imported System |
| Distribution Model | Authorized Distributor |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | DSCvesta2 |
| Temperature Range | –180 to 725 °C (atmospheric: RT to 600 °C |
| mechanical cooling | –95 to 725 °C) |
| Heating/Cooling Rate | up to 100 °C/min |
| Gas Flow Range | 0–250 mL/min (resolution: 1 mL/min) |
| Heat Flow Range | ±1000 mW |
| Noise Level | < 0.05 µW |
| Baseline Repeatability (–70 to 300 °C) | ≤ 10 µW |
| Enthalpy Sensitivity | 0.1 µW |
| Sensor Type | Heat-Flow-Type Metallic Sensor with vestaeye® Self-Diagnostic Function |
| Furnace Material | Pure Silver or Pure Platinum |
| Calibration Standards | ≥5 Certified Reference Materials (including Indium, Zinc, Tin, Bismuth, Lead) |
| Software Features | Dual-data logging (raw + corrected), LIMS integration support, export to Word, Excel, JPG, PDF |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | TG-DTA8122 |
| Temperature Range | Ambient to 1100 °C (standard), up to 1500 °C (high-temperature option) |
| Heating Rate | Up to 100 °C/min |
| Balance System | Horizontal differential triple-coil design |
| Max. Sample Mass | 1 g |
| TG Full Scale | ±250 mg (500 mg FS) |
| TG Sensitivity | 0.01 µg |
| DTA Full Scale | ±1000 µV (2000 µV FS) |
| Atmosphere Options | Air, inert gas, vacuum, steam, controlled flow |
| Optional Autosampler | 24 sample positions + 3 reference + 5 calibration positions |
| Standard Operating Modes | Constant Reaction Control (CRC), Step Isothermal Analysis (SIA), Dynamic Rate Control (DRC) |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | TG-DTA8122 |
| Temperature Range | Ambient to 1500 °C |
| Measurement Principle | Horizontal Dual-Cantilever Differential DTA with Integrated Thermogravimetry (TG) |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Thermo Mass Photo |
| Price | Upon Request |
| Interface | Conical quartz inlet mounted inside furnace with jet separator |
| Temperature Range | Ambient to 1100 °C |
| Mass Range | m/z 1–410 |
| Ionization Modes | Vacuum UV Photoionization (Patented Soft Ionization) and Electron Impact (EI) |
| Detection Capability | Fragment-free analysis of evolved gases including H₂ (m/z 1), CO, CH₄, H₂O, NH₃, NOₓ, VOCs, and high-mass organics up to m/z 410 |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | Thermo Mass |
| Coupling Type | TGA-MS |
| Mass Range | up to m/z 400 |
| Ionization Method | Fragment-Free Photoionization |
| Interface Technology | Patented Skimmer Interface |
| Real-Time Synchronization | Quadruple Concurrent Measurement (TGA, DTG, MS Total Ion Current, Selected Ion Monitoring) |
| Compliance | Designed for ISO 11358, ASTM E1131, and USP <621> thermal analysis workflows |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | DSC8230 |
| Heating Rate | up to 150 °C/min |
| Cooling Rate | 400 °C → 50 °C in ≤4 min |
| Multi-unit Control | up to 8 units via single PC |
| Temperature Control | Pre-compensated PID with hold-mode overshoot correction |
| Calibration | Built-in temperature calibration function |
| Power Mode | ECO standby mode (30% energy reduction) |
| Software | Integrated thermal analysis suite with auto-diagnosis, dual-data backup, remote firmware update, and configurable end-of-run actions |
| Sample Automation | Optional ASC (Automatic Sample Changer), field-installable |
| Hybrid Capability | Compatible with simultaneous XRD-DSC coupling |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | TG-DTA |
| Temperature Range | RT–1100°C (standard), RT–1500°C (high-temp) |
| Max Heating Rate | 100°C/min |
| Atmosphere Options | Air, Inert Gas, Flowing Gas, Vacuum |
| Max Sample Mass | 1 g |
| TG Range | ±0.1–±250 mg |
| TG Sensitivity | 0.1 µg |
| DTA Range | ±1.5–±1000 µV |
| Sample Crucible | Ø2 mm × 2.5 mm height |
| Sample Holder Orientation | Horizontal |
| Forced Cooling | Yes (1500°C → 50°C in ≤20 min) |
| ECO Mode | Yes (30% power reduction in standby) |
| ASC Compatibility | Up to 24 samples |
| Optional IR Furnace | Yes |
| Dynamic TG Modes | SIA, DRC, CRC |
| Multi-unit Control | Up to 8 units per PC |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | TG-DTA |
| Heating Rate | Up to 100 °C/min |
| Cooling Rate | 1500 °C → 50 °C in ≤20 min |
| Balance Type | Horizontal Differential Triple-Coil Microbalance |
| Temperature Control | Pre-Compensated PID with Isothermal Overshoot Compensation |
| Calibration | Integrated Temperature & Mass Calibration Functions |
| Power Mode | ECO Standby (30% Energy Reduction) |
| Software | Multi-Station Control (Up to 8 Units), Auto-Diagnosis, Dual Data Backup, Remote Firmware Update |
| Sample Handling | Plug-and-Play Sample Holder, Front-Access Sample Placement, Drop-Tolerant Horizontal Design |
| Optional Accessories | ASC Automatic Sample Changer, TG-DTA/GC-MS Hyphenated Interface |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | TMA8310 |
| Sample Capacity | Ø9 mm × 20 mm |
| Heating Rate | Up to 100 °C/min |
| Cooling Rate | From 1000 °C to 50 °C in ≤15 min |
| Temperature Control | Pre-emptive temperature regulation with hold-mode overshoot compensation |
| Calibration | Integrated temperature and dimensional calibration routines |
| Power Mode | ECO standby mode (30% energy reduction) |
| Multi-unit Control | Single PC controls up to 8 units |
| Safety | Dual-stage furnace safety alarm + emergency stop switch |
| Software | Fully integrated thermal analysis suite with auto-diagnosis, dual data backup, and remote firmware update capability |
| Compliance | Designed for GLP/GMP environments |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | TMA8311 |
| Maximum Measurement Temperature | 1500 °C |
| Measurement Principle | Dual-rod Differential Dilatometry |
| Instrument Type | Thermomechanical Analyzer (TMA) |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | XRD-DSC |
| Heating Rate | 0.01–100 °C/min |
| Temperature Range | Ambient to 1500 °C |
| Temperature Stability | ±0.01 °C |
| Atmosphere Options | Inert, Oxidizing, Reducing (via optional gas modules) |
| Compliance | ASTM E1269, ISO 11357, USP <1158>, FDA 21 CFR Part 11 (software-enabled) |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RF043 / RF044 (Ferrite Tile) & RHFFP (Hybrid Polymer-Ferrite Panel) |
| Frequency Range | 30 MHz – 18 GHz |
| Dimensions (RF043) | 100 × 100 × 6.7 mm |
| Dimensions (RF044) | 100 × 100 × 5.2 mm |
| Dimensions (RHFFP) | 200 × 200 × 80 mm |
| Weight (RF043) | 330 g |
| Weight (RF044) | 252 g |
| Weight (RHFFP) | 2.5 kg |
| Material Composition | Mn–Zn Ferrite (RF Series) |
| Mounting | Mechanical Fixation via Ceiling/Wall Screw Holes (Center-Mount Design) |
| Fire Rating | UL94 V-0 Compliant |
| Surface Load Capacity | ≥ 150 kg/m² (RHFFP Panels) |
| Brand | RION |
|---|---|
| Origin | Japan |
| Model | KE40B |
| Measurement Principle | Laser Light Scattering (830 nm Diode Laser, Class 1 per IEC 60825-1) |
| Detection Range | 0.15–0.5 µm (factory-configured 4-channel: 0.15 / 0.2 / 0.3 / 0.5 µm |
| Detection Efficiency | 50 ± 10% at 0.15 µm |
| Sample Flow Rate | 10 mL/min |
| Maximum Particle Concentration | 1,200 particles/mL (±5% accuracy for 0.15 µm particles) |
| Sample Pressure Limit | ≤300 kPa (gauge) |
| Wetted Materials | Quartz, PFA |
| Calibration Standard | PSL spheres (1.6 µm nominal) |
| Display Interface | Integrated resistive touch screen |
| Data Output | Built-in thermal printer + SD memory card storage |
| Communication | Direct interface with KE-40B1 controller (no external PC required) |
| Power Supply | DC 12 V (supplied by KE-40B1) |
| Operating Environment | 15–30 °C, ≤85% RH (non-condensing) |
| Dimensions (H×W×D) | 160 × 300 × 251 mm (excl. protrusions) |
| Weight | ~7.5 kg |
| Origin | Shandong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | RISE 2202 |
| Pricing | Available Upon Request |
| Measurement Range | 0.1–600 µm |
| Accuracy Error | < ±1% (D50, NIST-traceable standard reference materials) |
| Repeatability | < ±1% (D50, same sample, consecutive runs) |
| Power Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions (L×W×H) | 1000 × 330 × 320 mm |
| Weight | 39 kg |
| Laser Source | He-Ne gas laser, λ = 632.8 nm, linewidth < 0.002 nm, lifetime > 25,000 h |
| Detector Array | Non-uniform, cross-dimensional 3D扇-shaped matrix (patent-pending geometry), max detection angle: 90° |
| Dispersion System | Integrated 400 mL wet dispersion cell with 100 W ultrasonic probe, programmable sonication time, adjustable stirrer speed & circulation pump flow rate |
| Software | PADMAS v5.2 (Particle Diameter Measure & Analysis System), compliant with GLP audit trail requirements, supports FDA 21 CFR Part 11 optional electronic signature module |
| Brand | RISE |
|---|---|
| Origin | Beijing, China |
| Model | Rise-1020 |
| Instrument Type | Specific Surface Area and Pore Size Analyzer |
| Principle | Static Volumetric Method (Low-Temperature Nitrogen Physisorption) |
| Analysis Stations | 2 |
| Degassing Stations | 3 |
| Specific Surface Area Range | 0.0005 m²/g to no upper limit |
| Pore Size Range | 0.35–500 nm |
| Pressure Range | 0–133 kPa |
| P/P₀ Range | 1×10⁻⁶–0.998 |
| Vacuum Level | ≤1.0×10⁻⁴ Torr |
| Temperature Control | Liquid Nitrogen Bath (77 K), PT-100 Sensor (±0.1 °C) |
| Pressure Sensors | 4× Imported Absolute Transducers (0–133 kPa, ±0.1% FS) |
| AD Resolution | 22-bit |
| Theoretical Models | BET, Langmuir, BJH, t-plot, D-A, H-K, SF, MP, NLDFT, GCMC |
| Repeatability | R² ≥ 0.99 |
| Degassing Temp | Up to 400 °C |
| Sample Tube Material | Stainless Steel |
| Dewar | 2 L Metal Dewar (Cryogenic Stability) |
| Software | ISO 9277 / ISO 15901 / GB/T 19587 Compliant Data Acquisition & Reporting Suite |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China) |
| Model | RISE-2026 |
| Pricing | Upon Request |
| Measurement Range (Wet) | 0.05–800 µm |
| Measurement Range (Dry) | 0.1–800 µm |
| Accuracy Error | < ±1% (D50, NIST-traceable standard reference materials) |
| Repeatability | < ±1% (D50, same sample, repeated measurements) |
| Electrical Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions (L×W×H) | 950 × 330 × 300 mm |
| Weight | 50 kg |
| Laser Source | He–Ne gas laser, λ = 632.8 nm, lifetime >25,000 h |
| Maximum Detection Angle | 105° |
| Detector Array | Non-uniform cross-three-dimensional扇-shaped matrix (translated as “non-uniform crossed 3D sectoral matrix”) |
| Optical Design | Single-range convergent optical path, Fourier lens-free alignment |
| Standard Grading | 130 size classes default (0.02–2000 µm), fully customizable from Class 1 to 130 |
| Software | PADMAS v5.x (Particle Diameter Measure & Analysis System) |
| Data Export | CSV, Excel (.xlsx), PDF, PNG/JPEG images |
| Compliance | Designed per Q/01RZ01–2004 enterprise standard |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China) |
| Model | RISE-2028 |
| Pricing | Available Upon Request |
| Measurement Range (Wet) | 0.02–1200 µm |
| Measurement Range (Dry) | 0.1–1200 µm |
| Accuracy Error | < ±1% (D50, NIST-traceable standard reference materials) |
| Repeatability | < ±1% (D50, same sample, repeated measurements) |
| Power Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions (L×W×H) | 950 × 330 × 300 mm |
| Weight | 50 kg |
| Laser Source | He-Ne gas laser, λ = 632.8 nm, lifetime >25,000 h |
| Maximum Detection Angle | 135° |
| Detector Array | Non-uniform cross-three-dimensional扇-shaped matrix (translated as “non-uniform crossed 3D sectoral matrix”) |
| Default Size Classes | 130 channels (0.02–2000 µm), fully customizable from 1–130 channels |
| Data Output | Excel-compatible CSV, PDF, image (PNG/JPEG), printable reports with header/footer customization |
| Software | PADMAS v5.x (Particle Diameter Measure & Analysis System) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | RISE-2206 |
| Pricing | Upon Request |
| Measurement Range | 0.05–800 µm |
| Accuracy Error | < ±1% (D50, NIST-traceable standard reference materials) |
| Repeatability | < ±1% (D50, same sample, 3 consecutive runs) |
| Laser Source | He-Ne, 632.8 nm, >25,000 h lifetime |
| Detector Array | Non-uniform cross-3D扇-shaped matrix, max detection angle 105° |
| Power Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions (L×W×H) | 1000 × 330 × 320 mm |
| Weight | 39 kg |
| Dispersion System | Integrated 400 mL wet dispersion cell with 100 W ultrasonic probe, automatic degassing, circulation, rinsing and drainage |