Physical Property Testing Instruments
Filter
Showing 1531–1560 of 12274 results
| Brand | COANTEC |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | C50 |
| Price Range | USD 1,400 – 2,800 (FOB) |
| Brand | COANTEC |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | C60 |
| Price Range | USD 700 – 1,400 |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | 3D Inline |
| Measurement Principle | Advanced Thermooptical Spectroscopy (ATO) |
| Measurement Area | 25 cm × 19 cm (20 cm × 15 cm for white coatings) |
| Measurement Distance | 15 cm (non-contact) |
| Data Acquisition Time | 0.5 s |
| Result Display Time | ≤5 s |
| Thickness Repeatability (70–150 µm range) | <4 µm standard deviation |
| Minimum Interval Between Measurements | ≥5 s |
| Interface | SPS, PLC-compatible digital I/O |
| Compliance | Designed for ISO/IEC 17025-aligned QC environments, supports GLP/GMP data integrity requirements (audit trail, user access control, electronic signature readiness) |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | 3D |
| Measurement Principle | Pulsed Photothermal Infrared Thermography |
| Non-Contact Distance | ≥100 mm |
| Tolerance to Standoff Variation | ±10 mm |
| Maximum Tilt Angle Tolerance | ±45° |
| Surface Geometry Compatibility | Complex Curved & Freeform Surfaces (Including Edges, Recesses, and Contours) |
| Color Independence | Full Spectral Neutrality (Valid for All Pigmented Coatings, Including White, Metallic, and Pearlescent Finishes) |
| Spot Size | 1–10 mm Diameter |
| Thickness Range | 1–1000 µm (Dry Film) |
| Single-Measurement Duration | <300 ms |
| Conveyor-Compatible Dynamic Measurement | Yes |
| Data Output Interface | SPS, EtherNet/IP, OPC UA |
| Compliance | Designed for Integration into ISO/TS 16949 & IATF 16949 Compliant Automotive Paint Lines |
| Software Certification | Audit-Ready Data Logging per FDA 21 CFR Part 11 & GLP/GMP Traceability Requirements |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Coatmaster 3D |
| Measurement Principle | Thermal Spectral Profilometry (TSP) |
| Measurement Range | 1–2000 µm |
| Measurement Time | 0.5 s per frame |
| Measurement Distance | 10–120 cm (material-dependent) |
| Tilt Tolerance | ±45° (material-dependent) |
| Relative Standard Deviation | < 2% (on 60 µm uncured powder coating over aluminum substrate at 5 cm distance) |
| Max. Substrate Speed | 120 m/min |
| Color Independence | Full-spectrum — including white and highly reflective surfaces |
| Spatial Resolution | Adjustable via user-defined ROI |
| Data Export | Automated CSV/Excel-compatible structured logs |
| Interface | SPS, Ethernet/IP, OPC UA for PLC integration |
| Compliance | Designed for ISO 2178, ISO 2360, ASTM D7091 alignment |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Coatmaster Atline |
| Measurement Principle | ATO Photothermal Method |
| Substrate Compatibility | Rubber, Metal, CFRP, Plastic, Glass |
| Coating Compatibility | Lubricants, Polyurethane, Silicone, Liquid/Powder Coatings, Dacromet |
| Measurement Speed | ≤1 second per reading |
| Repeatability | <0.3 µm (on rubber substrates) |
| Accuracy vs. Reference | <±0.5 µm |
| Operating Distance & Angle | Tolerant (no strict alignment required) |
| Data Output | Real-time digital display, timestamped CSV export |
| Compliance | Designed for GLP/GMP environments |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | CoatChecker |
| Measurement Principle | Photothermal Infrared Thermography |
| Compliance | Designed for ISO 9001 and ASTM D7091-compliant quality control environments |
| Target Substrates | Concrete, bitumen, metal, wood, and polymer membranes |
| Typical Coating Types | Liquid-applied plastics (LAP), acrylic elastomeric coatings, polyurethane sealants, bituminous membranes, cementitious waterproofing slurries |
| Measurement Speed | <2 seconds per spot |
| Standoff Distance | 15–30 cm |
| Output | Real-time thickness map with statistical process control (SPC) export |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Coatmaster EX Inline |
| Type | Non-contact, Photothermal (ATO) Wet-Film & Dry-Film Thickness Gauge |
| Compliance | ATEX/IECEx Zone 1/21 Certified for Hazardous Areas |
| Measurement Principle | Pulsed Optical Heating + High-Speed Infrared Thermography + Dynamic Thermal Decay Analysis |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | FLEX, 3D |
| Technology | Advanced ATO Photothermal Method |
| Application | Real-time in-line wet & dry film thickness measurement for powder, liquid, and UV-curable coatings |
| Compliance | Designed for ISO/IEC 17025-aligned QA environments, supports GLP/GMP data integrity requirements (audit trail, user access control, electronic signature readiness) |
| Interface | SPS-compatible industrial integration, Ethernet/IP, OPC UA optional |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Coatmaster Flex |
| Measurement Principle | Advanced Thermooptical (ATO) Method |
| Wet Film Range | 1–400 µm |
| Dry/Powder Film Range | 1–1000 µm |
| Measurement Time | 0.25 s |
| Standoff Distance | 2–15 cm |
| Tilt Tolerance | ±70° |
| Repeatability | <1% RSD |
| Weight (excl. battery) | 1.3 kg |
| Dimensions | 374 mm × 91 mm × 203 mm |
| Substrate Compatibility | Metal, Plastic, Rubber, Wood, CFRP, Glass |
| Coating Types | Liquid Paints, Uncured/Cured Powder Coatings, Adhesives, E-Coats, Lubricants, Polymer Films, Thermal Sprayed Layers |
| Data Interface | Wi-Fi, Cloud API, ERP/MES Integration (OPC UA, RESTful) |
| Compliance | Designed for ISO 2808, ASTM D7091, and GLP/GMP-aligned data integrity workflows |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | FLEX |
| Measurement Principle | Advanced Photothermal (ATO) Method with DSP-Based Thermal Decay Analysis |
| Compliance | Designed for ISO 2808, ASTM D7091, and GLP/GMP-aligned process validation environments |
| Data Interface | Ethernet/RS-485, OPC UA & ERP/MES Integration Ready |
| Operating Mode | Real-time in-line or off-line measurement on wet or dry coatings |
| Sample State Compatibility | Uncured liquid coatings, powder coatings pre- and post-cure, thermoset/thermoplastic systems |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Flex |
| Measurement Principle | Advanced Thermal Wave (ATO) Technology |
| Compliance | Designed for ISO/IEC 17025-aligned QA environments, supports GLP/GMP data integrity requirements |
| Sample Throughput | Real-time inline or offline measurement on cured and uncured coatings |
| Material Independence | Validated for powder, liquid, and electrophoretic coatings on metallic and non-metallic substrates |
| Repeatability | ≤2.1% RSD (per independent field validation across 5 European coating facilities) |
| Geometry Tolerance | Measures on complex geometries — including cavities, recesses, threads, curved surfaces, and sharp edges — without physical contact or surface preparation |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | FLEX Offline |
| Measurement Principle | Thermal Effusivity-Based Non-Contact Analysis |
| Substrate Compatibility | Glass, Metal, CFRP, Rubber, Wood, Plastics |
| Coating Types | Liquid Paints, Powder Coatings, Water-Based Coatings, Dacromet, UV-Curable Coatings |
| Measurement Speed | ≤ 0.5 s per point |
| Safety | Xenon Flash Lamp (Non-Ionizing, No Radiation Hazard) |
| Compliance | CE, RoHS, ISO/IEC 17025 Traceable Calibration Support |
| Data Output | CSV, XML, OPC UA, Modbus TCP |
| Software | Coatmaster Studio v5.x (GLP-Compliant Audit Trail, User Access Levels, FDA 21 CFR Part 11 Optional) |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model Series | FLEX, INLINE, 3D |
| Measurement Principle | Active Thermographic Optical (ATO) |
| Compliance | Designed for ISO/IEC 17025-aligned QC environments |
| Software | Coatmaster Control Suite with audit trail, data export (CSV, XML), and real-time SPC integration |
| Output | Real-time thickness values (µm), temperature decay curves, statistical process reports |
| Interface | Ethernet/IP, OPC UA, analog 4–20 mA optional |
| Mounting | Flexible integration into conveyor lines, robotic arms, or fixed gantries |
| Sample State | Wet, uncured, powder, or partially sintered enamel coatings |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Coatmaster Inline, Coatmaster Flex |
| Measurement Principle | Thermal-Optical (Patented) |
| Application | Non-destructive, real-time thickness measurement of wet/dry/powder coatings on carbon fiber composites and other non-metallic substrates |
| Compliance | Designed for GLP/GMP environments |
| IP Rating | IP20 (Flex), IP65-rated enclosure options available for Inline |
| Measurement Distance Range | 2–15 cm (Flex), 10–120 cm (Inline) |
| Tilt Tolerance | ±45° (substrate-dependent) |
| Repeatability | <1% RSD (Flex), <2% RSD (Inline, Al substrate, 60 µm uncured powder) |
| Throughput | Up to 120 m/min (Inline) |
| Coating Types | All colors including white |
| Output | Real-time dry-film equivalent (DFE) thickness from wet or uncured layers |
| Data Access | Browser-based cloud dashboard + ERP integration |
| Measurement Speed | 0.3 s (Flex), 0.5 s (Inline) |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Inline |
| Type | Online, Non-Contact, Optical Thermographic Thickness Gauge |
| Measurement Principle | Pulsed Photothermal Radiometry (PPTR) with Infrared Thermal Decay Analysis |
| Compliance | Designed for ISO/IEC 17025-aligned QA workflows, supports GLP/GMP audit trails via optional software modules |
| Sample Surface Roughness Tolerance | Up to Ra 50 µm (typical industrial roughness) |
| Measurement Speed | ≤ 0.5 s per spot |
| Output Resolution | 0.1 µm (thickness increment), ±1–2% accuracy on rough substrates |
| Substrate Compatibility | Ferrous & non-ferrous metals, carbon fiber, glass, rubber, wood |
| Coating Compatibility | Thermal spray (Fe-, Ni-, WC-based), liquid paints, powder coatings, adhesives, lubricants, Dacromet, PTFE-based films |
| Safety | Xenon flash lamp (Class 1 LED-equivalent optical safety per IEC 62471) |
| Data Interface | Ethernet/IP, Modbus TCP, OPC UA (optional) |
| Software Platform | Coatmaster Studio v5.x (Windows-based, FDA 21 CFR Part 11 compliant configuration available) |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Inline Full |
| Measurement Principle | Advanced Photothermal (ATO) Method with DSP-Based Real-Time Analysis |
| Compliance | Designed for ISO/IEC 17025-aligned QC environments, compatible with GLP/GMP data integrity requirements |
| Output Interface | Ethernet/IP, OPC UA, analog 4–20 mA |
| Operating Speed Range | Up to 800 m/min |
| Spot Size | Adjustable (typically 3–10 mm Ø) |
| Environmental Rating | IP65 industrial enclosure |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Coatmaster Inline |
| Measurement Principle | Active Thermooptical (ATO) |
| Measurement Range (uncured powder) | 1–2000 µm |
| Measurement Time | 0.5 s |
| Working Distance | 10–120 cm (material-dependent) |
| Tilt Tolerance | ±45° (material-dependent) |
| Relative Standard Deviation | < 2% (at 5 cm distance on 60 µm uncured white powder coating over aluminum substrate) |
| Maximum Substrate Speed | 120 m/min |
| Color Independence | All colors, including white and light shades |
| Data Export | Fully automated ERP/MES integration |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Coatmaster Inline |
| Type | Non-contact, ATO-based Online Thickness Gauge |
| Application | Real-time dry-film thickness (DFT) measurement on coated metallic substrates (including Zn, Ni, Cr, Sn plating), composites, ceramics, glass, and elastomers |
| Compliance | Designed for GLP/GMP environments with audit-ready data logging capability |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Coatmaster Inline |
| Compliance | ISO 2808, ASTM D7091, ISO 2360 (eddy current & thermal principles adapted), CE, RoHS |
| Measurement Principle | Advanced Thermal Optics (ATO) with Digital Signal Processing (DSP) |
| Substrate Compatibility | Ferrous metals (steel, galvanized steel), aluminum alloys |
| Coating Types | Liquid paints (e-coat, primer, basecoat, clearcoat), powder coatings, UV-curable coatings |
| Operating Environment | Industrial paint shop (temperature: 15–40 °C |
| humidity | 30–80% RH non-condensing) |
| Measurement Speed | Up to 3 m/s conveyor speed |
| Spot Size | Ø3–5 mm (adjustable via optical configuration) |
| Repeatability | ≤ ±0.5 µm (on stable steel substrates with uniform coating) |
| Data Output | Real-time thickness values (wet & predicted dry film thickness), statistical summaries (X̄, R, Cpk), alarm triggers (configurable thresholds), CSV/Excel export |
| Software Interface | Coatmaster Control Suite v5.x with audit trail, user role management, and 21 CFR Part 11–compliant electronic signatures (optional module) |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Model | Coatmaster Inline Porcelain Enamel Thickness Gauge |
| Type | Non-contact, Real-time Online Thickness Measurement System for Powdered Enamel Coatings |
| Compliance | Designed for ISO/IEC 17025-aligned quality environments, supports GLP/GMP data integrity requirements (audit trail, user access control, electronic signature readiness) |
| Measurement Principle | Optical Interferometry with Multi-Point Spatial Calibration |
| Brand | Coatmaster |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Authorized Distributor |
| Category | Imported Instrument |
| Model | Coatmaster Photothermal IR Coating Thickness Gauge |
| Pricing | Available Upon Request |
| Brand | AIM Systems (Germany) |
|---|---|
| Origin | Germany |
| Model | CoatPro |
| Measurement Principle | Optical Interferometry & Spectral Reflectance Analysis |
| Measurement Type | Simultaneous Wet-Film and Dry-Film Thickness |
| Substrate Compatibility | Metallic, Polymeric, Glass, Rubber, Composite |
| Surface Geometry Support | Curved, Rough, Internal Walls, Complex Geometries |
| Environmental Rating | ATEX Zone 1 & Zone 2 Certified |
| Cooling Requirement | Passive Air-Cooled (No Water Cooling Required) |
| Data Output | Real-Time Streaming via EtherNet/IP, PROFINET, Modbus TCP |
| Reporting | Automated PDF/CSV Report Generation with Statistical Process Control (SPC) Metrics |
| Compliance | ISO 2808, ASTM D7091, EN ISO 19840, IEC 60079-0/-11, FDA 21 CFR Part 11 (Audit Trail Enabled) |
| Brand | CIMACH |
|---|---|
| Origin | Jilin, China |
| Model | COD Series |
| Gauge Lengths | 10 mm & 12 mm |
| Maximum Extension Range | 2 mm |
| Accuracy Class | Class 1 (±0.5% FS) |
| Radial Design | CBY1-J Type |
| Brand | COFOMEGRA |
|---|---|
| Origin | Italy |
| Model | CORROSIONBOX |
| Chamber Capacity | 450 L / 1000 L |
| Internal Dimensions (W×D×H) | 800×700×800 mm / 1100×800×1100 mm |
| External Dimensions (W×D×H) | 1320×720×1450 mm / 1640×820×1750 mm |
| Weight | 260 kg / 465 kg |
| Salt Solution Reservoir Capacity | 110 L / 260 L |
| Construction Material | 10 mm thick polypropylene (PP) |
| Chamber Insulation | Double-wall insulated |
| Temperature Range (Salt Fog Mode) | 35°C ± 2°C (standard) |
| Temperature Range (Condensation Mode) | 40°C ± 1°C |
| 雾化方� | �: Compressed air-driven saturated mist generation via central nozzle and diffusion tower |
| Heating System | Immersed heating elements with PID-controlled uniformity |
| Drainage | Integrated floor-level sump with gravity drainage |
| Compliance | Designed to meet ASTM B117, ISO 9227, JIS Z2201, DIN 50021 requirements |
| Brand | Cofomegra |
|---|---|
| Origin | Italy |
| Model | D100 |
| Chamber Volume | 300 L |
| Interior Material | Full Plastic Construction |
| Temperature Range | Up to 55 °C |
| Spray Method | Single Nozzle System |
| Salt Fog Deposition Rate | Compliant with ISO 9227 & ASTM B117 Baseline Requirements |
| Humidity Control | Saturated Atmosphere at Constant RH |
| Compliance | ASTM D1735, ASTM D2247, BS 3900/F9, DIN 50017, DIN 55958, DIN 55991, ISO 11503, ISO 6270-1, ISO 4541, ISO 3231, NFT 30-077 |
| Electrical Supply | 230 V, 50 Hz |
| Configuration | Standalone Unit with Manual Operation Interface |
| Brand | Cofomegra |
|---|---|
| Country of Origin | Italy |
| Model | SOLARBOX 3000e |
| Xenon Lamp Power | 3 kW |
| Irradiance Control Range | 300–1000 W/m² (300–800 nm) |
| Black Standard Temperature (BST) Range | 35–100 °C |
| Relative Humidity Control | Yes (RH series variant) |
| Water Spray System | Adjustable interval (1–999 min), demineralized water (≤2 μS/cm), 50 L reservoir |
| Internal Chamber Dimensions | 950 × 550 × 1600 mm (W×D×H) |
| Exposure Area | 420 × 200 mm |
| UV Filtering Options | Soda-lime glass (outdoor/indoor), IR-reflective coated variants |
| Sensor Compatibility | 295–400 nm broadband UV, 340 nm narrowband, 420 nm narrowband, illuminance, BST |
| Brand | Cofomegra |
|---|---|
| Origin | Italy |
| Model | SOLARBOX (1500e / 3000e) |
| Spray Mode | Continuous |
| Fog Collection Rate | 1–2 mL/80 cm²/h |
| Nozzle Pressure | 0.7 bar |
| De-fogging Method | Air-assisted雾 removal |
| Salt Fog Settling Rate | 1–2 mL/80 cm²/h |
| Temperature Range | Ambient to 100°C |
| Black Panel Temperature Range | 35–100°C |
| Water Injection Interval | 1–999 min |
| Water Temperature | 30–50°C |
| Chamber Volume | Up to 300 L (D100/D200) |
| Compliance | ASTM D1735, ASTM D2247, ISO 6270-1, ISO 4541, ISO 3231, DIN 50017, EN ISO 6988, VDA 621-421 |
| Brand | COFOMEGRA |
|---|---|
| Origin | Italy |
| Model | SOLARBOX Xe/R.H. |
| Chamber Volume | 40 L (SOLARBOX 1500e) / 75 L (SOLARBOX 3000e) |
| Temperature Range | 35–100 °C |
| Humidity Control | Optional Relative Humidity Monitoring |
| Irradiance Control | Continuous, Closed-Loop via Integrated Radiometer |
| UV Cut-off Filters | 280 nm, 300 nm, 310 nm, and IR-reducing filter |
| Sample Capacity | ≥120 pcs (15 × 30 mm) for 1500e |
| Programmable Cycles | Up to 15 multi-step programs |
| Interface | RS232-C for data logging and remote control |
| Compliance | ASTM G155, ISO 4892-2, ISO 11341, SAE J2527, DIN 75220, UNI EN 13523-13 |
| Brand | Cofomegra |
|---|---|
| Origin | Italy |
| Model | Cofomegra Series |
| Lamp Power | 4000 W |
| Operating Voltage | 380 V, 12 A |
| Max. Sample Thickness | 7 mm |
| Max. Working Area | 900 × 1100 mm |
| Dimensions (L×W×H) | 1301 × 1510 × 2110 mm |
| UV Lamp Type | Metal Halide |
| Vacuum System | Integrated |
| Optical Integrator | Yes |
| Diffuser | Yes |
| Light Monitoring & Control | Yes |
| LCD Display | Multilingual, Real-time Status & Fault Diagnostics |
| Sample Holders | 4 Adjustable Racks |
| Viewing Panel | Translucent Acrylic with Halo Reduction (>90% suppression) |