- All
- Favorite
- Popular
- Most rated
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Vickers Hardness Tester |
| Model | HMAS-UHT1700CM |
| Load Range | 0.1–30 kgf (standard), optional up to 150 kgf |
| Operating Temperature Range | 400–1600 °C (full-field uniformity) |
| Optical Working Temperature | ≤1600 °C (10× or 20× objective) |
| Temperature Control Accuracy | ±1 °C |
| Max. Dwell Time | 72 h |
| Force Resolution | 0.01% FS |
| Multi-Axis Control | Up to 9 axes |
| Sample Size Limit | Ø30 mm × 30 mm |
| Heating Element | U-shaped MoSi₂ (4 units) |
| Thermocouple | Type B |
| Furnace Cavity | 100 × 80 × 80 mm³ |
| Image Magnification | 1000× (10× objective), optional 2000× (20× objective) |
| Objective Resolution | 1.44 µm (10×), optional 1.19 µm (20×) |
| Rapid Sample Exchange | ≤50 s at 1600 °C |
| Cooling | Dual-mode (water + inert gas), ≤5 s cooldown to safe handling |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | JBS-500B |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy | 500 J (large hammer), 250 J (small hammer) |
| Impact Velocity | 5.4 m/s |
| Pendulum Lift Angle | 150° |
| Support Span | 40 mm |
| Anvil Radius | R1.0–R1.5 mm |
| Striking Edge Radius | R2.0–R2.5 mm |
| Distance from Pendulum Center to Impact Point | 800 mm |
| Standard Specimen Dimensions | 10 × 10 × 55 mm |
| Power Supply | 3-phase 4-wire, 50 Hz, 380 V |
| Angular Accuracy | ±0.1° |
| Mainframe Dimensions (L×W×H) | 2124 × 600 × 1340 mm |
| Digital Control Cabinet Dimensions (L×W×H) | 360 × 400 × 1200 mm |
| Net Weight | 450 kg |
| Environmental Requirements | Non-corrosive atmosphere, vibration-free installation site, absence of strong electromagnetic fields |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic (China) |
| Model | HBS-D3000M7 |
| Instrument Type | Brinell Hardness Tester |
| Measurement Range | 8–650 HBW |
| Test Force Levels | 62.5 kgf (612.5 N) to 3000 kgf (29,400 N) |
| Indentation Scales | HBW 2.5/62.5 to HBW 10/3000 |
| Hardness Conversion | HRC, HV, HK, HRA, HRD, HR15N–HR45N, HR15T–HR45T, HRB, HRF |
| Load Application | Fully Automatic (Loading–Dwell–Unloading) |
| Dwell Time | 0–60 s (1 s increments) |
| Optical Magnification | 20× Digital Eyepiece |
| Eyepiece Resolution | 0.5 µm |
| Specimen Max Height | 230 mm |
| Distance from Indenter Center to Chamber Wall | 155 mm |
| Data Storage | Up to 30 Test Records |
| Standard Conformance | GB/T 231.1, GB/T 231.2, JJG 150 |
| Power Supply | AC 220 V / 50 Hz |
| Dimensions (L×W×H) | 535 × 185 × 750 mm |
| Net Weight | 116.5 kg |
| Gross Weight | 142.0 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | JB-300C |
| Instrument Type | Pendulum Impact Tester |
| Nominal Impact Energy | 300 J / 150 J (achieved via adjustable counterweights) |
| Impact Velocity | 5.2 m/s |
| Pendulum Pre-Lift Angle | 150° |
| Specimen Support Span | 40 mm |
| Support Anvil Radius | R1.0–R1.5 mm |
| Striking Edge Radius | R2.0–R2.5 mm and R8 mm |
| Distance from Pendulum Pivot to Impact Point | 750 mm |
| Standard Specimen Dimensions | 10 × 10 × 55 mm |
| Power Supply | 3-phase, 4-wire, 50 Hz, 380 V, 180 W |
| Overall Dimensions | 2124 × 600 × 1340 mm |
| Angular Resolution | ±0.1° |
| Axial Positioning Accuracy | ±0.05 mm |
| Net Weight | 450 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Instrument Type | Automatic Microindentation Hardness Tester |
| Measurement Range | 0.001–6000 HV |
| Test Forces | 10, 25, 50, 100, 200, 300, 500, 1000 gf (0.098–9.807 N) |
| Standards Compliance | GB/T 4340, ASTM E384, ISO 6507-1 |
| Automation | Motorized Turret, Auto-Loading/Unloading, Encoder-Based XY Stage (25 × 25 mm), Digital Focus Simulation & 3D Indent Reconstruction |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | WES-600D |
| Instrument Type | Electro-Hydraulic Servo Testing Machine |
| Max Test Load | 600 kN |
| Max Tensile Jaw Spacing | 600 mm |
| Flat Specimen Clamping Thickness | 0–15 mm |
| Round Specimen Clamping Diameter | Φ13–Φ40 mm |
| Compression Test Height | 550 mm |
| Piston Stroke | 150 mm |
| Load Indication Accuracy | ±1% of full scale |
| Bend Support Roller Spacing | 450 mm |
| Column Spacing | 450 mm |
| Motor Power | 3 kW |
| Overall Dimensions (W×D×H) | 950 × 630 × 2265 mm |
| Weight | 2600 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Vickers Hardness Tester |
| Model | HMAS-HT700CM |
| Operating Temperature Range | Ambient to 600 °C |
| Load Range | 0.1–30 kgf (standard), up to 150 kgf (optional) |
| Optical System | 10× objective rated for continuous operation at 600 °C (20× optional) |
| Temperature Uniformity | ≤ ±5 °C across 100 × 80 × 80 mm furnace cavity |
| Temperature Control Accuracy | ±1 °C |
| Maximum Dwell Time | 72 h |
| Multi-Axis Motion Control | Up to 9 axes, positional resolution ≤ 0.1 µm |
| Image Magnification | 1000× (2000× optional) |
| Objective Resolution | 1.44 µm (1.19 µm with 20×) |
| Indenter Material | Cubic Boron Nitride (CBN) pyramid |
| Indenter Shank | Inconel alloy, 110 mm length |
| Sample Size Limit | Ø30 × 30 mm |
| Rapid Sample Exchange | ≤50 s within isothermal field |
| Force-Time Data Acquisition | Real-time, synchronized with thermal and positional feedback |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Vickers Hardness Tester |
| Model | HMAS-D10SMZ |
| Measurement Range | 0–3000 HV |
| Test Forces (6 Levels) | 0.3, 0.5, 1, 3, 5, 10 kgf |
| Standards Compliance | GB/T 4340 |
| Automatic Turret | Yes |
| Loading Mechanism | Gear-Driven Force Application |
| Z-Axis Drive | Precision Lead Screw |
| XY Manual Stage | 100 × 100 mm platform, 25 × 25 mm travel, 0.01 mm mechanical resolution |
| Objective Lenses | 10×, 20× (optional: 40×, 50×, 100×) |
| Total Optical Magnification | 100×, 200× (dual-scale measurement) |
| Digital Image Magnification (via CCD + PC) | ~400×–800× |
| Indentation Imaging | High-Resolution CCD + Real-Time Image Acquisition Processor |
| Software | YANRUN HMAS Hardness Analysis Suite (v5.x) with Auto-Indent Recognition, SPC, 3D Indent Modeling, Simulated Focus, 12-Color Backgrounds, ASTM/GB Hardness Conversion, PDF/Word/Excel Reporting, GLP-Compliant Audit Trail |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Instrument Type | Vickers Hardness Tester |
| Measurement Range | 0.001–6000 HV |
| Total Test Forces | 10, 25, 50, 100, 200, 300, 500, 1000 gf |
| Standards Compliance | GB/T 4340.2, JJG 151 |
| Objective Lenses | 10×, 40× |
| Total Optical Magnification | 100×, 400× (digital zoom up to ~1600×) |
| X-Y Motorized Stage | 50 mm × 50 mm travel, 185 mm × 140 mm platform, 50 kg load capacity |
| Maximum Specimen Height | 180 mm |
| Indenter-to-Column Distance | 130 mm |
| Dwell Time | 0–60 s (1 s increments) |
| Illumination | Adjustable LED brightness |
| Data Acquisition | Encoded digital measurement |
| Software Interface | Multilingual (English, Chinese, German, Spanish, Russian) |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | LAW-100 |
| Instrument Type | Hydraulic Tensile Testing Machine |
| Maximum Test Load | 100 kN |
| Load Measurement Range | 4–100% FS |
| Load Accuracy | ≤ ±1% FS |
| Piston Stroke | 500 mm |
| Piston Idle Speed | ≥ 100 mm/min |
| Loading Speed | 5–50 mm/min |
| Display Interface | PC-based GUI |
| Control System | Electro-hydraulic Servo Automatic Control |
| Actuator | 100 kN Hydraulic Cylinder |
| Load Cell | 100 kN Precision Load Sensor |
| Pump Station Components | Electro-hydraulic Servo Valve, Hydraulic Tubing, Cooling Unit, Low-Voltage Starter Cabinet, Industrial Control Computer (Advantech P4), A4 Thermal Printer |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | MC009-WAW-300C |
| Instrument Type | Electro-Hydraulic Servo Testing Machine |
| Load Capacity Range | 6–300 kN |
| Load Accuracy | ±1% or ±0.5% FS |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | JBW-750C |
| Instrument Type | Pendulum Impact Tester |
| Nominal Impact Energies | 750 J, 600 J, 450 J, 300 J, 150 J |
| Impact Velocity | 5.5 m/s |
| Pendulum Pre-Lift Angle | 150° |
| Distance from Pendulum Axis to Impact Point | 825 mm |
| Specimen Support Span | 40 mm |
| Anvil Radius (Clamp Corner) | R1–R1.5 mm |
| Striking Edge Radius | R2–R2.5 mm (standard: R2 mm |
| optional | R8 mm) |
| Striking Edge Angle | 30° |
| Striking Edge Thickness | 16 mm |
| Specimen Support Surface Tilt | 0° |
| Specimen Dimensions | 10 × 10 (or 7.5 or 5) × 55 mm |
| Overall Dimensions | 2450 × 1200 × 2455 mm |
| Net Weight | 2500 kg |
| Power Supply | 3-phase AC 380 V ±10%, 50 Hz, 5 A |
| Operating Temperature Range | 10–35 °C |
| Relative Humidity Limit | ≤85% RH |
| Installation Requirement | Mounted on ≥300 mm thick reinforced concrete foundation or ≥1500 kg rigid base |
| Leveling Tolerance | ≤0.2 mm/m on machine base reference surface |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | CSL-1 |
| Sample Dimensions Supported | 10×10×55 mm, 10×7.5×55 mm, 10×5×55 mm |
| Notch Types | V-notch (GB/T 229–2007, ISO 148-1:2016 compliant) and U-notch (2 mm root radius, GB/T 229–2007) |
| Notching Stroke | 350 mm |
| Feed Rate | 2.5 mm/min |
| Overall Dimensions (L×W×H) | 350×350×700 mm |
| Net Weight | 80 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | HV-5Z / HV-10Z / HV-30Z / HV-50Z |
| Hardness Tester Type | Vickers Hardness Tester |
| Measuring Range | 0.001–6000 HV |
| Test Forces (kgf) | HV-5Z: 0.2, 0.3, 0.5, 1, 3, 5 |
| HV-10Z | 0.3, 0.5, 1, 3, 5, 10 |
| HV-30Z | 1, 3, 5, 10, 20, 30 |
| HV-50Z | 1, 5, 10, 20, 30, 50 |
| Turret Control | Motorized Auto-Turret |
| Load Application | Fully Automatic Loading/Unloading/Holding |
| Hold Time | 0–99 s (1-s increments) |
| Optical System | Dual-Magnification Objective Lenses (10× observation / 20× measurement), 10× Eyepiece |
| Total Magnification | 100× (observation), 200× (measurement) |
| Minimum Detection Unit | 0.25 µm |
| Measurement Method | Manual indentation diagonal entry via calibrated eyepiece, auto-calculated HV value |
| Display | LCD with dual-scale readout (HV + selectable converted scales) |
| Compliance | GB/T 4340.2, JJG 151 |
| Max Specimen Height | 220 mm |
| Distance from Indenter to Column | 130 mm |
| Dimensions (H×W×D) | 680 × 216 × 565 mm |
| Power Supply | AC 220 V / 50 Hz |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | WEW-1000B |
| Instrument Category | Universal Testing Machine (UTM) – Hydraulic, Dual-Column, Floor-Mounted |
| Max Test Force | 1000 kN |
| Force Accuracy | ±1% or ±0.5% (per ISO 7500-1 Class 1) |
| Force Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Measurement Accuracy | 0.01 mm |
| Tensile Space | 700 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Grip Range | Φ13–Φ40 mm |
| Flat Specimen Grip Thickness | 0–15 mm |
| Flat Specimen Max Grip Width | 75 mm |
| Compression Platen Diameter | φ160 mm (optional 204×204 mm square platen) |
| Bend Support Span | Adjustable up to 450 mm |
| Bend Roller Width | 140 mm |
| Bend Roller Diameter | Φ40 mm |
| Max Bending Deflection | 150 mm |
| Max Crosshead Speed | 50 mm/min |
| Gripping Method | Hydraulic Auto-Grip System |
| Power Supply | Main Oil Pump Motor 1.1 kW + Crosshead Motor 0.75 kW |
| Host Dimensions (W×D×H) | 890×660×2250 mm |
| Control Console Dimensions (W×D×H) | 1000×700×1400 mm |
| Net Weight | 2700 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Electronic Universal Testing Machine |
| Model | MC009-WDS-20GL |
| Load Capacity | 0.08–20 kN |
| Load Accuracy | ±0.5% |
| Displacement Resolution | 0.0025 mm |
| Speed Range | 0.001–500 mm/min (infinitely variable) |
| Test Space (Tension/Compression) | 600 mm |
| Effective Width | 570 mm |
| Frame Dimensions (W×D×H) | 750 × 1000 × 2300 mm |
| Weight | 1100 kg |
| Power Supply | Single-phase 220 V ±10%, 50 Hz |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | HMAS-HT1500CM |
| Instrument Type | Vickers Hardness Tester |
| Temperature Range | 400–1400 °C |
| Max Load Capacity | 30 kgf (optional up to 150 kgf) |
| Objective Working Temp | ≤1400 °C (10× or 20×) |
| Load Control | Continuous variable loading with real-time force–time acquisition |
| Hold Time | Up to 72 h |
| Temperature Uniformity | ±5 °C across 100×80×80 mm furnace cavity |
| Thermal Stability | ±1 °C |
| Heating Rate | 1–40 °C/min |
| Optical Resolution | 1.44 µm (10×), optional 1.19 µm (20×) |
| XY Motion Precision | ≤±1 µm |
| Z-Axis Resolution | ≤0.1 µm |
| Sample Size Limit | Ø30×30 mm |
| Quick-Change Cycle | ≤50 s at 1400 °C |
| Cooling | Dual-mode (water + inert gas), <5 s cooldown to <55 °C |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | WEW-300B |
| Instrument Category | Universal Testing Machine (UTM) |
| Max. Test Load | 300 kN |
| Load Range | 12–300 kN |
| Load Accuracy | ±1% or ±0.5% |
| Load Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Measurement Accuracy | 0.01 mm |
| Tensile Space | 550 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Grip Diameter | Φ6–Φ26 mm |
| Flat Specimen Grip Thickness | 0–15 mm |
| Flat Specimen Max. Grip Width | 75 mm |
| Compression Platen Diameter | φ160 mm (optional 204×204 mm) |
| Bending Span (Two-Point) | 450 mm |
| Bending Roller Width | 120 mm |
| Bending Roller Diameter | Φ30 mm |
| Max. Bending Deflection | 150 mm |
| Max. Piston Speed | 50 mm/min |
| Clamping Method | Automatic Hydraulic Clamping |
| Round Specimen Jaw Sets | Φ6–Φ13 mm & Φ13–Φ26 mm |
| Flat Specimen Jaw Set | 0–15 mm |
| Compression Fixture | φ160 mm |
| Bending Fixture | Two-point support, max. span 450 mm |
| Oil Pump Motor Power | 1.1 kW |
| Crosshead Motor Power | 0.75 kW |
| Mainframe Dimensions (W×D×H) | 720×580×1950 mm |
| Control Cabinet Dimensions (W×D×H) | 1000×700×1400 mm |
| Weight | 2150 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | MC009-WDW-100 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Maximum Test Load | 100 kN |
| Force Range | 2–100% of full scale (optional 0.4–100%) |
| Accuracy Class | Class 1 (optional Class 0.5) |
| Displacement Resolution | ≥0.01 mm |
| Tensile Test Space | 700 mm |
| Compressive Test Space | 800 mm |
| Compression Width | 400 mm |
| Power Supply | 220 V AC |
| Operating Temperature | Room temperature to 35 °C |
| Frame Type | Portal (Dual-Column) |
| Standard Fixtures | Flat jaw (0–7 mm, 7–14 mm), Round jaw (φ4–9 mm, φ9–14 mm), Compression platens |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | HMAS-D1000SMZA |
| Instrument Type | Vickers Hardness Tester |
| Measurement Range | 0.001–6000 HV |
| Total Test Forces | 10, 25, 50, 100, 200, 300, 500, 1000 gf |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HRS-150F |
| Instrument Type | Rockwell Hardness Tester |
| Hardness Range | HRA: 20–88, HRB: 20–100, HRC: 20–70 |
| Total Test Forces | 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) |
| Preliminary Test Force | 98.07 N (10 kgf) |
| Indentation Depth Resolution | 0.1 HR |
| Maximum Specimen Height | 190 mm |
| Anvil-to-Indenter Distance | 160 mm |
| Test Force Dwell Time | 0–60 s (adjustable in 1 s increments) |
| Compliance | GB/T 230.2, JJG 112 |
| Power Supply | AC 220 V / 50 Hz |
| Dimensions (L×W×H) | 540 × 225 × 755 mm |
| Net Weight | 90.5 kg |
| Gross Weight | 110.5 kg |
| Display | 7-inch color TFT touchscreen |
| Data Output | Integrated thermal printer |
| Hardness Scale Conversion | Automatic conversion across 15 Rockwell scales (HRA, HRBW, HRC, HRD, HRE, HRF, HRG, HRH, HRK, HRL, HRM, HRP, HRR, HRS, HRV) and cross-scale equivalents (HBW, HV, HK, HR15N, HR30N, HR45N, HR15T, HR30T, HR45T) |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HV-C5/10/30/50VE10 |
| Instrument Type | Vickers Hardness Tester |
| Hardness Measurement Range | 8–3000 HV |
| Test Force Options | 0.2–50 kgf (six selectable force levels per capacity tier) |
| Objective Lenses | 10× (observation), 20× (measurement for 5/10 kgf) |
| Total Magnification | 100× (observation), 200× (measurement, 5/10 kgf) |
| Minimum Detectable Indentation Resolution | 0.16 µm (10×), 0.08 µm (20×) |
| Indentation Dwell Time | 0–60 s (1 s increments) |
| Max Specimen Height | 230 mm |
| Distance from Indenter Center to Chamber Wall | 130 mm |
| Power Supply | AC 220 V / 50 Hz |
| Dimensions (L×W×H) | 580 × 375 × 800 mm |
| Net Weight | 47.0 kg |
| Compliance | GB/T 4340, ISO 6507 |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | 300kN |
| Max Test Force | 300 kN |
| Force Measurement Range | 4–100% FS |
| Force Accuracy | ≤ ±1% |
| Stroke | 1,000 mm |
| Maximum Test Length (Gauge Length Extension) | 10 m |
| Piston Speed (No-Load) | ≥100 mm/min |
| Controlled Loading Speed | 0.5–80 mm/min |
| Control System | Electro-hydraulic servo with real-time PC-based closed-loop control |
| Display Interface | Industrial PC with LCD monitor and dedicated tensile testing software |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | WAW-1000D |
| Instrument Type | Electro-Hydraulic Servo Testing Machine |
| Load Capacity Range | 20 kN – 1000 kN |
| Load Measurement Accuracy | ±1% FS (or ±0.5% FS) |
| Displacement Resolution | 0.002 mm |
| Piston Maximum Speed | 80 mm/min |
| Max Tensile Test Space | 600 mm |
| Max Compressive Test Space | 550 mm |
| Flat Specimen Clamping Thickness | 0–15 mm (standard), optional extended range |
| Round Specimen Clamping Diameter | φ13–φ26 mm, φ26–φ40 mm, φ40–φ60 mm (optional) |
| Compression Platen Size | 200 × 200 mm |
| Bend Support Span | 500 mm |
| Support Width | 140 mm |
| Support Pin Diameter | 50 mm |
| Piston Stroke | 200 mm |
| Clamping Method | Hydraulic |
| Transducer | Oil-Pressure Load Cell |
| Signal Conditioning | PCI-Mounted Programmable Amplifier with Auto-Zero and Auto-Calibration |
Show next