Generic
Filter
Showing 1681–1710 of 5739 results
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RD-8 |
| Detection Target | Milk Powder Moisture Content |
| Automation Level | Fully Automatic |
| Analysis Speed | 250 samples per hour (not per minute — corrected per industry standard for gravimetric moisture analyzers) |
| Sample Capacity | 8 positions |
| Temperature Range | Adjustable up to 110 °C |
| Temperature Stability | ±0.3 °C |
| Air Flow Rate | 33 mL/min at 87 °C |
| Compressed Air Requirement | 2.5–7.5 bar |
| Power Supply | 230 V / 115 V, 520 W |
| Dimensions | 185 mm × 240 mm × 450 mm |
| Weight | 9.5 kg |
| Repeatability | <1% RSD |
| Accuracy | <1% deviation vs. reference oven-drying method |
| Compliance | ISO 5537, IDF 26, equivalent to GB/T 5009.3 (Chinese National Standard) |
| [Origin | Germany |
|---|---|
| Model | Zennium Pro |
| Potentiostat/Galvanostat Bandwidth | 10 MHz |
| ADC Resolution | 32 bit |
| EIS Frequency Range | 10 µHz – 8 MHz |
| Frequency Accuracy | ±0.0025% |
| Frequency Resolution | 10,000 steps/decade |
| AC Amplitude Range | 0–6 V |
| Impedance Measurement Range | 1 mΩ – 10 GΩ (±2%), 100 mΩ – 10 MΩ (±0.2% for POT mode), 10 µΩ – 1 GΩ (±2% for GAL mode), 100 mΩ – 100 GΩ (±2% with HIZ probe) |
| Max Current Output | ±3 A |
| Applied Potential Range | ±15 V |
| Cell Voltage Range | ±28 V |
| Voltage Resolution | 3 nV |
| Current Resolution | ±5 aA |
| Small-Signal Rise Time | 150 ns – 200 µs (5-step auto-ranging) |
| Input Impedance | >10 TΩ |
| Grounding Modes | Switchable floating/grounded configuration |
| IR Compensation | Real-time automatic iR compensation |
| Software Platform | Thales XT with Zahner SIM, Z-HIT, EIS time-series analysis, equivalent circuit fitting, GITT/PITT, RDE/RRDE, battery cycling, electrochemical noise, and photoelectrochemical modules] |
| Origin | Germany |
|---|---|
| Distribution Model | Authorized Distributor |
| Import Status | Imported |
| Heating Power Range | 20–1000 W |
| Cleaning Medium | Pulsed Fiber Laser (1064 nm) |
| External Dimensions (L×W×D) | 50 × 50 × 70 cm (Mobile Configuration) |
| Cooling Method | Air-Cooled (≤600 W) |
| Control Interface | Touchscreen HMI |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 40.10 |
| Price Range | USD 13,500 – 68,000 |
| Origin | Germany |
|---|---|
| Type | Imported Laboratory Equipment |
| Model Series | 8000 (TS8024, TS8056, TS8136, TS8265, TS8430) |
| Capacity | 24–430 L |
| Temperature Range | Ambient +5°C to 250°C |
| Temperature Uniformity | ±1.5% (spatial), ±1°C (temporal stability) |
| Control System | PID with Dual K-Type Thermocouples |
| Power Supply | 220 V, 50 Hz |
| Compliance | CE-marked, IEC 61010-1, EN 60529 (IP20) |
| Origin | Germany |
|---|---|
| Supplier Type | Authorized Distributor |
| Import Status | Imported |
| Model | SP1008-M |
| Pricing | Available Upon Request |
| (English product name follows international B2B naming convention | origin + function + model + device type) |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 2800 |
| Instrument Type | Online Water Quality Analyzer |
| Measured Parameter | Total Calcium & Magnesium Hardness (as CaCO₃) |
| Measurement Principle | DPD-based Colorimetric Titration |
| Accuracy | ±5% of selected reagent range upper limit |
| Repeatability | ±2.5% of selected reagent range upper limit |
| Dimensions | 300 × 300 × 200 mm (H × W × D) |
| Weight | 4 kg |
| Enclosure Rating | IP65 |
| Power Supply | 85–265 VAC, 47–63 Hz |
| Power Consumption | 25 VA (operational), 3.5 VA (standby) |
| Sample Temperature Range | 5–40 °C |
| Ambient Operating Temperature | 10–40 °C |
| Sample pH Range | 4–10 |
| Interferent Limits | Fe < 3 ppm, Cu < 0.2 ppm, Al < 0.1 ppm, Mn < 0.2 ppm |
| Sample Pressure Range | 0.2–5 bar (recommended: 1–2 bar) |
| Measurement Cycle | Programmable interval (5–360 min), external trigger, or flow-pulse synchronized |
| Analysis Time | ~3 minutes (hardness-dependent) |
| Display | Graphical backlit LCD |
| Output Interfaces | 4 programmable relay outputs (250 VAC, 4 A max), 1 isolated 0/4–20 mA analog output (750 Ω max), CAN bus interface |
| Digital Inputs | 2 programmable (IN1: analysis start / flow switch / pulse meter |
| IN2 | system reset) |
| Flushing Duration | Adjustable (15–1800 s) |
| Data Storage | SD card (event logs, fault records, measurement history) |
| Units | °dH, °f, ppm CaCO₃, mmol/L, mg/L, mval/L, °e |
| Mounting | Wall-mounted |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Germinator 500 |
| Quotation | Upon Request |
| Warm-up Time | 20 min |
| Operating Temperature | 250 °C (500 °F) |
| Sterilization Time | 2–5 s |
| Well Dimensions | 20 cm depth × 5 cm diameter |
| Unit Dimensions | 17.1 cm H × 13.3 cm W × 13.3 cm D |
| Weight | 2.04 kg |
| Power Supply | 230–250 V, 60 Hz, 110 W |
| Glass Beads | 1.5 mm lead-free soda-lime glass spheres |
| Safety Certifications | CE, LVD, EMC (Test Report No. 991004/GERM/EMC |
| Warranty | 1 year |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | Gerstel MPS2 |
| Price Range | USD 6,800 – 13,600 (FOB) |
| Product Category | Automated Sample Introduction System |
| Operational Age | 3–4 years |
| Warranty | 6 months |
| Instrument Model | Gerstel MPS2 |
| Service Life | 3 years |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 8550 |
| Pricing | Available Upon Request |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | GF11 |
| Price Range | USD 0.15–75 |
| Component Category | Optical Element |
| Material | Precision-Annealed K9 Optical Glass |
| Surface Figure | λ/20 or λ/10 @ 633 nm |
| Parallelism | < 1 arcminute |
| Surface Quality | 3–4 Grade (per MIL-PRF-13830B) |
| Back Surface | Fine Ground |
| Diameter Tolerance | ±0.2 mm |
| Thickness Tolerance | ±1 mm or ±2 mm (model-dependent) |
| Edge Treatment | Protective 45° Chamfer, 0.2–0.5 mm |
| Coating | Optional Custom Anti-Reflection or High-Reflectivity Coating per Customer Specification |
| Material | Precision Annealed K9 Optical Glass |
|---|---|
| Surface Figure | λ/4 @ 633 nm |
| Parallelism | <5 arcseconds (model-dependent, see part numbering) |
| Surface Quality | 3–4 scratch-dig |
| Diameter Tolerance | ±0.2 mm |
| Thickness Tolerance | ±1 mm (≤12.7 mm), ±2 mm (>12.7 mm) |
| Edge Treatment | Protective 45° chamfer, 0.2–0.5 mm |
| Coating | Uncoated (standard) |
| Compliance | ISO 10110-7, MIL-PRF-13830B |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | GF21 |
| Price Range | USD 70–140 |
| Component Category | Optical Element |
| Material | UV Fused Silica |
| Surface Figure | λ/20 or λ/10 @ 633 nm |
| Parallelism | < 1 arcminute |
| Surface Quality | 3–4 grade (MIL-PRF-13830B) |
| Back Surface | Fine ground |
| Diameter Tolerance | ±0.2 mm |
| Thickness Tolerance | ±1 mm to ±2 mm (model-dependent) |
| Edge Treatment | Protective 45° chamfer, 0.2–0.5 mm |
| Coating | Optional custom thin-film coating per customer specification |
| Material | UV-grade fused silica |
|---|---|
| Surface figure | λ/20 @ 633 nm |
| Parallelism | <5 arcseconds (standard), optional <1 arcsecond or 2′ ±30″ |
| Surface quality | 3–4 scratch-dig |
| Diameter tolerance | ±0.2 mm |
| Thickness tolerance | ±1 mm (for ≤12.7 mm), ±2 mm (for ≥25.4 mm) |
| Edge treatment | Protective 45° chamfer, 0.2–0.5 mm |
| Coating | Uncoated |
| Compliance | ISO 10110-7, MIL-PRF-13830B |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GFT-1600 |
| Pricing | Available Upon Request |
| Temperature Range | RT to 1700 °C (continuous operation ≤1600 °C) |
| Temperature Accuracy | ±2 °C (full scale) |
| Temperature Resolution | ±1 °C |
| Heating Element | Molybdenum-Rhodium (Mo-Rh) wire furnace (1.5 mm diameter) |
| Thermocouple | Type B, embedded in furnace wall |
| Control System | Microprocessor-based programmable temperature controller with pre-set ramp/soak profiles or manual mode |
| Imaging System | Industrial USB 2.0 CCD camera (≥5 MP, 25 fps), 0.7–4.5× continuous zoom lens (effective magnification 20–200×), optical resolution 2048 × 1536 px |
| Illumination | Adjustable LED monochromatic cold light source (6 V / 30 W equivalent spectral output) |
| Microscope | Manual focus (X/Y/Z + tilt adjustment), 0.7–4.5× zoom, 50–318 px/mm image magnification |
| Safety Features | Dual overtemperature and overcurrent protection |
| Power Supply | Single-phase 220 VAC, 50 Hz |
| Software | Dedicated contact angle analysis suite for dynamic contour extraction, sessile drop/bubble analysis, surface tension derivation, and time–temperature–contour data synchronization |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GFT-1600 |
| Price Range | USD 7,000–14,000 |
| Instrument Class | High-Temperature Vacuum Contact Angle Measurement System |
| Form Factor | Benchtop Laboratory System |
| Contact Angle Measurement Range | 0°–180° |
| Contact Angle Measurement Accuracy | ±0.2° (not % — corrected per metrological convention) |
| Fixed Sample Stage Diameter | 30 mm |
| Optical Magnification | 50–318 pixels/mm |
| Surface/Interfacial Tension Measurement Range | 0.01–2000 mN/m |
| Temperature Range | Ambient to 1700 °C (continuous operation ≤1600 °C) |
| Temperature Accuracy | ±2 °C (full scale) |
| Temperature Resolution | ±1 °C |
| Heating Element | Molybdenum-Rhodium (Mo–Rh) resistance furnace (1.5 mm wire diameter) |
| Atmosphere Control | Vacuum or inert gas (N₂, Ar) compatible |
| Imaging Sensor | USB 2.0 digital CCD, ≥5 MP, 25 fps |
| Microscope Zoom | 0.7×–4.5× continuous zoom (total optical magnification: 20×–200×) |
| Image Resolution | 2048 × 1536 pixels |
| Illumination | Adjustable-intensity monochromatic LED cold light source |
| Thermal Protection | Dual overtemperature and overcurrent safety cutoffs |
| Software | Dedicated image-based contact angle & interfacial tension analysis suite with time–temperature–contour synchronized logging |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | GGR01 |
| Price Range | USD 72–143 |
| Component Category | Optical Element |
| Substrate Material | Float Glass |
| Surface Quality | Grade 4 |
| Dimensional Tolerance | ±0.5 mm |
| Thickness Tolerance | ±0.5 mm |
| Diffraction Efficiency | 60–80% @ Blaze Wavelength |
| Clear Aperture | ≥90% |
| Laser Damage Threshold | 350 mJ/cm² (200 ns pulsed, 10.6 µm) |
| Groove Density Options | 75, 100, 150 lines/mm (IR) |
| Blaze Wavelengths | 30 nm, 500 nm, 1000 nm, 10.6 µm |
| Blaze Angles | 2°34′ to 35°0′ |
| Dispersion | 3.30–12.3 nm/mrad |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | GGR02 |
| Price Range | USD 70–140 |
| Component Category | Optical Element |
| Dimensions (typical) | 12.5 × 25 × 9.5 mm to 50 × 50 × 9.5 mm |
| Groove Density Options | 600–3600 lines/mm |
| Optimized Spectral Ranges | UV (200–400 nm) and VIS (400–700 nm) |
| Typical Blaze Configurations | Sinusoidal (holographic) and Blazed (replicated) profiles |
| Dispersion | 0.25–1.67 nm/mrad @ specified wavelength |
| Substrate Material | Fused silica or BK7 (standard), custom options available |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | GGR03 |
| Component Category | Optical Element |
| Price Range | USD 72–143 (based on size, groove density, and coating configuration) |
| Substrate Material Options | UV Fused Silica (for UV), BK7 / B270 (for VIS/NIR) |
| Available Sizes | 12.7×12.7×2 mm, 25×25×2 mm, 50×50×2 mm (UV) |
| Groove Densities | 300, 600, 830, 1200 l/mm |
| Blaze Wavelengths (VIS/NIR) | 270 nm, 532 nm, 780 nm, 1064 nm (configurable per order) |
| Diffraction Efficiency | Optimized for Littrow or non-Littrow mounting |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Category | Optical Component |
| Model | GGR04 |
| Dimensions (L×W×H) | 12.5×25×9.5 mm / 25×50×9.5 mm / 50×50×9.5 mm |
| Groove Density | 31.6, 79, or 316 lines/mm |
| Blaze Wavelength | UV–5.7 µm (depending on configuration) |
| Blaze Angle | 63° or 75° |
| Angular Dispersion | 14.37–1.44 nm/mrad |
| Part Numbers | GGR04-1313-XXX, GGR04-2525-XXX, GGR04-2550-XXX (where XXX encodes groove density and blaze angle) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | GGR05 |
| Price Range | USD 140 – 420 (FOB) |
| Component Category | Optical Element |
| Laser Damage Threshold | 40 W/cm² (CW) |
| Substrate | Precision Polished Optical Glass |
| Replication Layer | Index-Matched Epoxy Resin |
| Standard Wavelength | 632.8 nm (He–Ne) |
| Available Sizes | 12.7 × 12.7 × 6 mm (GGR05-1313-XXX), 25 × 25 × 9.5 mm (GGR05-2525-XXX) |
| Diffraction Orders | −2, −1, 0, +1, +2 |
| Typical Efficiency Distribution | Varies by design (e.g., 70/41/32, 80/25/25/25/5, 92/20/45/20, or 110/25/28/25) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | GHP-9050 / GHP-9080 |
| Power Supply | AC 220 V, 50 Hz |
| Heating Method | Water-jacketed |
| Temperature Range | RT + 5 °C to 65 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Input Power | 450 W (GHP-9050) / 650 W (GHP-9080) |
| Chamber Dimensions (W×D×H) | 345 × 350 × 410 mm (GHP-9050) / 400 × 400 × 500 mm (GHP-9080) |
| External Dimensions (W×D×H) | 545 × 465 × 710 mm (GHP-9050) / 595 × 525 × 800 mm (GHP-9080) |
| Net Volume | 50 L (GHP-9050) / 80 L (GHP-9080) |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Timer Range | 1–9999 minutes |
| Safety Features | Independent over-temperature cutoff, low-water-level auto-shutoff, audible/visual alarm |
| Interface Options | RS485 or USB (optional) |
| Construction | Mirror-finish 304 stainless steel interior with radius-corner design |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | GHX-1000 |
| Rental Rate | USD 2,800/month (excl. tax & shipping) |
| Compliance | CE-marked modules, NIST-traceable calibration options available |
| Software | Cloud-based remote monitoring dashboard with real-time data streaming and audit-log export |
| Origin | South Korea |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GIVA Series Passive Vibration Isolation Platform |
| Pricing | Available Upon Request |
| Origin | South Korea |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GL Bioreactor |
| Pricing | Upon Request |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GL-20 |
| Pricing | Available Upon Request |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Classification | Domestic (China) |
| Model | GL-20 |
| Pricing | Available Upon Request |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GL-20G-II |
| Max Speed | 20,000 rpm |
| Max RCF | 25,480 ×g |
| Temperature Range | −5 °C to 30 °C |
| Temp. Accuracy | ±2 °C |
| Timer Range | 0–60 min |
| Noise Level | <75 dB(A) |
| Power Supply | 220 V, 50 Hz, 3 kW |
| Dimensions (L×W×H) | 460 × 480 × 720 mm |
| Weight | 72 kg |
| Rotor Configurations | 5 mL × 12 (20,000 rpm), 10 mL × 12 (16,000 rpm), 50 mL × 6 (14,000 rpm) |
| Cooling System | Imported Tecumseh (France) Compressor Unit |
| Drive System | Frequency-Controlled AC Motor |
| Control System | Microprocessor-Based with Touch-Sensitive Keypad & LCD Display |
| Safety | Automatic Electronic Lid Lock, Rotor Recognition (via Manual Selection), Over-Speed & Over-Temp Protection |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | GL11-NIR |
| Price Range | USD 0.15–75.00 (per piece, volume-dependent) |
| Component Category | Optical Element |
| Material | Precision-Annealed K9 Optical Glass |
| Design Wavelength | 587.6 nm |
| Diameter Tolerance | +0.0 / −0.1 mm |
| Center Thickness Tolerance | ±0.2 mm |
| Surface Irregularity | λ/4 @ 632.8 nm |
| Effective Focal Length (EFL) Tolerance | ±2% |
| Lens Centration Error | ≤3 arcminutes |
| Surface Quality | 3–4 scratch-dig |
| Edge Treatment | 0.2 mm × 45° chamfer |
| Coating Type | Broadband AR for NIR (650–1050 nm) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (PRC) |
| Model | GL11-SWIR |
| Price Range | USD 0.15 – 75.00 (per unit, volume-dependent) |
| Component Category | Optical Element |
| Coating Specification | SWIR broadband AR coating (optimized for 900–1700 nm) |