Yacheng / PILOTECH
Filter
Showing 61–90 of 111 results
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YC-100 |
| Capacity | 100 L |
| Batch Feed Range | 5–20 kg |
| Heating Method | Thermal Oil Circulation (Jacketed, Pressure-Free) |
| Condenser Area | 3 m² (Tube-Type) |
| Vacuum Range | 0 to –0.08 MPa |
| Temperature Control Accuracy | ±2 °C |
| Heating Power | 27 kW (380 V) |
| Cooling Water Consumption | 3 t/h (< 0.3 MPa) |
| Construction Material | SUS304 Stainless Steel (Contact Parts) |
| Compliance | FDA-Compliant Surface Finish, GMP-Compatible Design, GLP-Ready Configuration |
| Optional Module | Ultrasonic Extraction (15–60 kHz, Probe-Type, Focused Energy) |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YC-100 |
| Pricing | Upon Request |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YC-1000 |
| Quotation | Upon Request |
| Sample Compatibility | Aqueous solutions only |
| Max Feed Rate | 1500 mL/h |
| Inlet Air Temperature Range (Spray Drying) | 105–200 °C |
| Fluidized Bed Inlet Air Temperature Range | 40–150 °C |
| Heating Power | 3 kW |
| Total Electrical Load | 5 kW (220 V / 50 Hz) |
| Drying Chamber Volume | 10 L |
| 雾化 Air Pressure | 1–3 bar |
| Peristaltic Pump Flow Range | 0–1500 mL/h |
| Construction Material | Full 316L stainless steel + borosilicate glass expansion chamber |
| Control System | PLC with color LCD touchscreen interface |
| PID Temperature Control | Real-time, closed-loop |
| Minimum Sample Requirement | 50 g per granulation batch |
| Footprint | 0.5 m² |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YC-1000 |
| Sample Type | Aqueous solutions only |
| Max. Spray Drying Throughput | 1500 mL/h |
| Max. Fluidized Bed Batch Capacity | 1000 g/batch |
| Inlet Air Temperature Range (Spray Drying) | 105–200 °C |
| Fluidized Bed Inlet Air Temperature Range | 40–150 °C |
| Peristaltic Pump Flow Rate | Adjustable up to 1500 mL/h |
| Atomizing Air Pressure | 1–3 bar |
| Drying Chamber Volume | 10 L (Borosilicate glass + stainless steel) |
| Heating Power | 3 kW |
| Total Electrical Load | 5 kW (220 V / 50 Hz) |
| PID Temperature Control | Real-time, closed-loop |
| Display | Color LCD touchscreen with monitoring of inlet temperature, fan frequency, fluid bed temperature, pump speed, and pulse-jet cleaning frequency |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | YC-10L |
| Pricing | Upon Request |
| Extractor Volume | 10 L (effective) |
| Condenser Area | 0.5 m² |
| Vacuum Range | 0 to −0.08 MPa |
| Temperature Control | PID, ±2 °C accuracy |
| Heating Method | Jacketed thermal oil circulation (pressureless) |
| Material of Construction | 316L stainless steel (wetted parts) |
| Cooling Water Consumption | 0.5 t/h at < 0.3 MPa pressure |
| Power Supply | 3-phase, 380 V, 50 Hz (customizable) |
| Optional | Integrated ultrasonic extraction module (15–60 kHz, titanium alloy transducer) |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yacheng Instrument Co., Ltd. |
| Model | YC-1800 |
| Heating Temperature Range | 110–150 °C |
| Max. Feed Rate | 1500 mL/h |
| Minimum Sample Volume | 50 mL |
| Temperature Control Accuracy | ±1 °C (PID) |
| Nozzle Orifice Options | 0.5, 0.7, 1.0, 1.5, 2.0 mm |
| Power Supply | 4 kW / 380 V |
| Construction | Full Stainless Steel (AISI 316L contact surfaces) |
| Atomization | Two-Fluid Pneumatic Nozzle |
| Touchscreen Interface | Color LCD with Real-Time Parameter Monitoring |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yacheng Instrument Co., Ltd. |
| Model | YC-1800 |
| Heating Temperature Range | 110–150 °C |
| Max. Feed Rate | 1500 mL/h |
| Minimum Sample Volume | 50 mL |
| Nozzle Orifice Options | 0.5, 0.7, 1.0, 1.5, 2.0 mm |
| Temperature Control Accuracy | ±1 °C (PID) |
| Power Supply | 4 kW / 380 V |
| Construction | Full Stainless Steel |
| Atomization | Dual-Fluid Nozzle with Auto-Cleaning Needle |
| Display | Color LCD Touchscreen (Chinese Interface) |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-1800 |
| Heating Temperature Range | 110–150 °C |
| Max. Feed Rate | 1800 mL/h |
| Min. Sample Volume | 50 mL |
| Temperature Control Accuracy | ±1 °C |
| Nozzle Orifice Options | 0.5 / 0.7 / 1.0 / 1.5 / 2.0 mm |
| Power Supply | 4 kW / 380 V |
| Construction | Full Stainless Steel (316L-grade contact surfaces) |
| Atomization | Two-Fluid Pneumatic Nozzle System |
| Touchscreen Interface | Color LCD with PID-Controlled Thermal Management |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-1800 |
| Heating Temperature Range | 110–150 °C |
| Max. Feed Rate | 1800 mL/h |
| Minimum Sample Volume | 50 mL |
| PID Temperature Control Accuracy | ±1 °C |
| Nozzle Orifice Options | 0.5, 0.7, 1.0, 1.5, 2.0 mm |
| Power Supply | 4 kW / 380 V |
| Construction | Full Stainless Steel |
| Atomization | Two-Fluid Pneumatic Nozzle |
| Noise Level | Compliant with ISO 7779 Laboratory Acoustic Standards |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | YC-2000 |
| Vacuum Range | −0.05 to −0.06 MPa |
| Max Feed Rate | 800 mL/h |
| Minimum Sample Volume | 50 mL (varies with solids content) |
| Heating Temperature Control | PID-controlled, ±1 °C accuracy |
| Nozzle Orifice Options | 0.5, 0.7, 1.0, 1.5, 2.0 mm (stainless steel, customizable) |
| Integrated Oil-Free Compressor | Yes |
| Power Supply | 6 kW / 380 V AC |
| Chamber Construction | Full 316L stainless steel |
| Operating Temp Range | 60–80 °C (under vacuum) |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | YC-2000 |
| Power Supply | 6 kW / 380 V AC |
| Maximum Feed Rate | 800 mL/h |
| Minimum Sample Volume | 50 mL (varies with solids content) |
| Heating Temperature Range | 60–80 °C |
| Vacuum Range | −0.05 to −0.06 MPa |
| Temperature Control Accuracy | ±1 °C (PID-controlled) |
| Nozzle Orifice Options | 0.5, 0.7, 1.0, 1.5, 2.0 mm (stainless steel, customizable) |
| Integrated Oil-Free Compressor | Yes |
| Atomization System | Dual-Fluid (compressed air + liquid feed) |
| Construction Material | Full 316L stainless steel |
| Touchscreen Interface | Color LCD, Chinese-language UI (no English firmware provided) |
| Cleaning Feature | Automatic needle-type nozzle cleaner (adjustable frequency) |
| Particle Flowability | High (normal size distribution) |
| Noise Level | <60 dB(A) — compliant with ISO 7779 and national laboratory acoustic standards |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-2000 |
| Heating Temperature Control Accuracy | ±1 °C |
| Vacuum Range | −0.05 to −0.06 MPa |
| Nominal Feed Rate | 800 mL/h |
| Minimum Sample Volume | 50 mL (varies with solids content) |
| Nozzle Orifice Options | 0.5, 0.7, 1.0, 1.5, 2.0 mm |
| Integrated Oil-Free Compressor | Yes |
| Construction Material | Full Stainless Steel (316L/304) |
| Power Supply | 6 kW / 380 V AC |
| Operating Temperature Range | 60–80 °C |
| Touchscreen Interface | Color LCD, Chinese-language UI |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | YC-2000 |
| Sample Type Compatibility | Aqueous solutions only |
| Maximum Feed Rate | 1500 mL/h |
| Temperature Range | 60–200 °C (operable down to 50 °C under vacuum) |
| Particle Size Distribution | 1–100 µm (normal distribution) |
| Vacuum Range | –0.05 to –0.06 MPa |
| Heating Control Accuracy | ±1 °C (PID-regulated) |
| Nozzle Orifice | 1.0 mm standard (0.5/0.8/1.5/2.0 mm optional) |
| Power Supply | 7 kW / 380 V AC |
| Construction Material | Full 316L stainless steel |
| Integrated Oil-Free Compressor | Yes |
| Cleaning Function | Automatic needle-type nozzle clearance system |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yes |
| Country of Origin | China |
| Model | YC-2000 |
| Sample Type | Aqueous solutions only |
| Max Feed Rate | 1500 mL/h |
| Temperature Range | 60–200 °C (operable down to 50 °C under vacuum) |
| Particle Size Distribution | 1–100 µm |
| Vacuum Range | –0.05 to –0.06 MPa |
| Heating Control Accuracy | ±1 °C |
| Nozzle Orifice | 1.0 mm standard (0.5/0.8/1.5/2.0 mm optional) |
| Power Supply | 7 kW / 380 V AC |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | YC-210 |
| Pricing | Upon Request |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-210 |
| Instrument Type | Automated Quantitative Concentrator |
| Key Feature | Continuous-feed wiped-film evaporation under vacuum |
| Typical Residence Time | <30 s |
| Construction Material | Borosilicate glass (custom-machined, corrosion-resistant) |
| Application Scope | Heat-sensitive, high-viscosity, and foaming liquids |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | YC-3000 |
| Instrument Type | Standard Shelf-Type Freeze Dryer |
| Application Scope | Laboratory Use |
| Batch Capacity | 1500 mL per cycle |
| Total Process Time | <6 hours (1500 mL) |
| Inlet Air Temperature | <−50 °C |
| Cold Trap Temperature | ≤−60 °C |
| Ultimate Vacuum Pressure | <20 Pa (empty chamber) |
| Vacuum Pump Power | 1.1 kW |
| 雾化压力 | 1–3 bar (adjustable) |
| Air Compressor Output | 32 L/min |
| Nozzle Type | Concentric Dual-Fluid Nozzle with Vertical Adjustment |
| Display | Color LCD Touchscreen (Inlet Temp, Fan Frequency, Peristaltic Pump Speed, Needle Clearance Frequency) |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Standard Shelf-Type Spray Freeze Dryer |
| Batch Capacity | 1.5 L per cycle |
| Total Processing Time | < 6 hours (1.5 L load) |
| Inlet Air Temperature | ≤ −50 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum Pressure | < 20 Pa (empty chamber) |
| Vacuum Pump Power | 1.1 kW |
| Spray Pressure Range | 1–3 bar (adjustable) |
| Compressed Air Flow Rate | 32 L/min |
| Nozzle Type | Adjustable coaxial two-fluid spray nozzle |
| Display | Full-color LCD touchscreen (inlet temp, fan frequency, peristaltic pump speed, anti-clogging needle frequency) |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Model | YC-310 |
| Pricing | Upon Request |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | YC-310 |
| Pricing | Upon Request |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | YC-3100 |
| Sample Type Compatibility | Aqueous Solutions Only |
| Maximum Throughput | 6–10 L/h (water-based) |
| Particle Size Range | 1–120 µm |
| [Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | YC-500 |
| Max Feed Rate | 500 mL/h |
| Inlet Temperature Range | Up to 200 °C |
| Particle Size Output | 1–25 µm |
| Solvent Compatibility | Aqueous and Organic (with optional YC-501 Nitrogen Recirculation System) |
| Nozzle Diameter | 1.0 mm standard (0.5/0.8/1.5/2.0 mm optional) |
| Construction | Full SUS304 Stainless Steel |
| Power Supply | 2 kW / 220 V] |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YC-500 |
| Sample Type Compatibility | Aqueous solutions (organic solvents supported with optional YC-501 nitrogen recirculation system) |
| Maximum Feed Rate | 500 mL/h |
| Inlet Air Temperature Range | Up to 200 °C |
| Outlet Air Temperature Range | As low as 80 °C (solvent-dependent) |
| Particle Size Range | 1–25 µm |
| Nozzle Diameter | Standard 1.0 mm (0.5/0.8/1.5/2.0 mm optional) |
| Construction Material | Full SUS304 stainless steel |
| Power Supply | 2 kW / 220 V |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-500 |
| Max Feed Rate | 500 mL/h |
| Temperature Range | Up to 200 °C (Inlet), Down to 80 °C (Outlet) |
| Particle Size Range | 1–25 µm |
| Solvent Compatibility | Aqueous solutions |
| Nozzle Diameter | 1.0 mm standard (0.5/0.8/1.5/2.0 mm optional) |
| Construction Material | Full SUS304 stainless steel |
| Power Supply | 2 kW / 220 V |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-500 |
| Sample Compatibility | Aqueous solutions (organic solvents with optional YC-501 nitrogen recirculation system) |
| Max Feed Rate | 500 mL/h |
| Inlet Air Temperature Range | Up to 200 °C |
| Outlet Air Temperature Range | As low as 80 °C (solvent-dependent) |
| Particle Size Distribution | 1–25 µm |
| Nozzle Orifice | 1.0 mm standard (0.5/0.8/1.5/2.0 mm optional) |
| Construction | Full SUS304 stainless steel |
| Power Supply | 2 kW / 220 V |
| Display | Color LCD touchscreen with real-time animation and parameter monitoring (inlet temp, fan frequency, peristaltic pump speed, needle cleaning frequency) |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic Laboratory Equipment |
| Model | YC-501 |
| Quotation | Upon Request |
| Sample Compatibility | Aqueous & Organic Solvent Solutions |
| Max Feed Rate | 500 mL/h |
| Inlet Air Temperature Range | Up to 200 °C |
| Particle Size Output | 1–25 µm |
| Control Interface | 7-inch Color Touchscreen with Real-time Process Animation |
| Atomization | Coaxial Two-Fluid Nozzle (Standard 1.0 mm |
| Construction Material | Full SUS304 Stainless Steel (Including Drying Chamber, Cyclone, and Collection Vessel with Observation Window) |
| Integrated N₂ Recirculation System | Yes (with Condenser, Oxygen Monitoring, and Heat Exchanger) |
| Power Supply | 2.5 kW / 220 V AC |
| Minimum Feed Volume | 10–20 mL (dependent on solids content) |
| Outlet Air Temperature Range | ≥40 °C (solvent-dependent) |
| Safety Compliance | Inert Atmosphere Operation (O₂ < 5% vol), Explosion-Proof Enclosure Design, Closed-Loop Solvent Recovery |
| [Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | YC-501 |
| Sample Compatibility | Aqueous & organic solvent-based solutions (e.g., ethanol, acetone, chloroform, ethyl acetate) |
| Max Feed Rate | 500 mL/h |
| Inlet Temperature Range | Ambient to 200 °C |
| Outlet Temperature Range | ≥40 °C (solvent-dependent) |
| Particle Size Distribution | 1–25 µm |
| 雾化方� | �: Two-fluid nozzle (coaxial, adjustable vertical position) |
| Nozzle Orifice | 1.0 mm standard (0.5/0.8/1.5/2.0 mm optional) |
| Construction Material | Full SUS304 stainless steel (including drying chamber, cyclone, collection vessel, and viewing port) |
| Control Interface | 7-inch color touchscreen with real-time animated process visualization |
| Key Parameters Displayed | Inlet temperature, needle purge frequency, peristaltic pump speed, O₂ concentration (optional sensor) |
| Integrated Systems | Built-in nitrogen recirculation loop with condenser-based solvent recovery |
| Power Supply | 2.5 kW total (220 V, 50/60 Hz)] |
| [Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | YC-501 |
| Sample Compatibility | Aqueous & organic solvent-based solutions |
| Max Feed Rate | 500 mL/h |
| Inlet Air Temperature Range | Up to 200 °C |
| Particle Size Output | 1–25 µm |
| Gas System | Integrated N₂ closed-loop circulation with condensate recovery |
| Control Interface | 7-inch color touchscreen PLC controller |
| Construction | Full SUS304 stainless steel (including drying chamber, cyclone, and collection vessel) |
| Nozzle Type | Coaxial two-fluid atomizer (standard 1.0 mm |
| Power Supply | 2.5 kW / 220 V] |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | YC-501 |
| Sample Compatibility | Aqueous and organic solvent-based solutions |
| Max Feed Rate | 500 mL/h |
| Inlet Air Temperature Range | Up to 200 °C |
| Particle Size Output | 1–25 µm |
| Control Interface | 7-inch color touchscreen with programmable microprocessor |
| Drying Atmosphere | Nitrogen-closed loop (O₂ monitoring & control) |
| Construction Material | Full SUS304 stainless steel |
| Nozzle Type | Concentric two-fluid atomizer (standard 1.0 mm |
| Power Requirement | 2.5 kW / 220 V |
| Compliance | Designed for GLP-compliant labs |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | YC-510 |
| Sample Type | Aqueous solutions only |
| Max Feed Rate | 500 mL/h |
| Inlet Air Temperature Range | 50–200 °C (vacuum-enabled low-temp mode: ≤55 °C) |
| Particle Size Distribution | 1–25 µm |
| Vacuum Level | −0.08 MPa |
| Temperature Control Accuracy | ±1 °C (PID-regulated) |
| Nozzle Orifice | Standard 1.0 mm (optional: 0.5/0.8/1.5/2.0 mm) |
| Minimum Sample Volume | 10–20 mL (dependent on solids content) |
| Final Moisture Content | <1% w/w |
| Construction | Full 316L stainless steel |
| Power Rating | 3.5 kW |
| Display | Color LCD touchscreen with Chinese UI (factory-default) |