Optical Laboratory Equipment
Filter
Showing 451–480 of 1780 results
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | GM-3 |
| Dimensions | W22 × D35 × H19 mm |
| Weight | 18 g |
| Anesthetic Gas Port OD | Ø4 mm |
| Material | Biocompatible, Non-Toxic Polymer |
| Intended Species | Rats (Rattus norvegicus) |
| Reusable | Yes |
| Regulatory Status | Research-Use-Only (RUO), Compliant with ISO 10993-5 Cytotoxicity Guidelines |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | GM11 |
| Price Range | USD 0.15–75.00 |
| Component Category | Optical Element |
| Material | Precision Annealed K9 Optical Glass |
| Surface Figure | λ/4 @ 633 nm |
| Parallelism | < 3 arcmin |
| Surface Quality | 3–4 Scratch-Dig |
| Back Surface | Fine Ground |
| Dimensional Tolerance | +0.0 / −0.1 mm |
| Thickness Tolerance | ±0.2 mm |
| Edge Treatment | Protective Chamfer 0.2–0.5 mm × 45° |
| Coating Options | Uncoated, Aluminum + SiO₂ Protection, UV-Enhanced Aluminum + SiO₂, Silver + SiO₂, Gold + SiO₂ |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | GM12 |
| Unit Price Range | USD 0.15–75.00 (varies by size, coating, and quantity) |
| Component Category | Optical Element |
| Substrate Material | Precision-Annealed K9 Optical Glass |
| Surface Figure | λ/10 @ 633 nm |
| Parallelism | < 3 arcmin |
| Surface Quality | 10-5 scratch-dig (ISO 10110-7) |
| Back Surface | Fine Ground |
| Dimensional Tolerance | +0.0 / −0.1 mm (diameter or side length) |
| Thickness Tolerance | ±0.2 mm |
| Edge Treatment | Protective 45° chamfer, 0.2–0.5 mm |
| Coating Options | Uncoated, Protected Aluminum (Al+SiO₂), UV-Enhanced Aluminum (UVAL), Protected Silver (Ag+SiO₂), Protected Gold (Au+SiO₂) |
| Diameter | 12.5 mm / 12.5 × 12.5 mm / 25.0 mm |
|---|---|
| Focal Length | –5.0 to –150.0 mm |
| Thickness | 3 mm / 6 mm |
| Radius of Curvature | –10.0 to –300.0 mm |
| Substrate Material | K9 Optical Glass |
| Coating | Standard Protected Aluminum (Ravg > 87% @ 400–700 nm) |
| Surface Quality | 60-40 Scratch-Dig |
| Clear Aperture | ≥90% of Diameter |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | GM14 |
| Price Range | USD 0.15–75.00 (per unit, depending on coating and configuration) |
| Component Category | Optical Element |
| Substrate Material | Precision Annealed K9 Optical Glass |
| Surface Irregularity | λ/1 @ 633 nm |
| Centration Error | < 3 arcminutes |
| Reflected Surface Scratch-Dig | 60–40 (ISO 10110-7) |
| Back Surface Finish | Fine Ground or Inspection Polish |
| Diameter/Width Tolerance | +0.0 / −0.1 mm |
| Thickness Tolerance | ±0.2 mm |
| Focal Length Tolerance | ±2% |
| Edge Treatment | Protective 45° Chamfer, 0.2–0.5 mm |
| Coating Options | Bare Substrate, Protected Aluminum (AL), UV-Enhanced Aluminum (UVAL), Protected Silver (AG), Protected Gold (AU) |
| Material | Precision Annealed K9 Optical Glass |
|---|---|
| Surface Figure | λ/10 @ 633 nm |
| Parallelism Error | < 1 arcminute |
| Surface Scratch-Dig | 10-5 (ISO 10110-7) |
| Back Surface Finish | Fine Ground |
| Minor Axis Tolerance | +0.0 / –0.2 mm |
| Thickness Tolerance | ±0.5 mm |
| Edge Treatment | Protective 45° Chamfer, 0.2–0.5 mm |
| Coating Options | Bare, Aluminum + SiO₂ Protection, Silver + SiO₂ Protection, Gold + SiO₂ Protection |
| Compliance | ISO 10110, MIL-PRF-13830B |
| Material | Precision-Annealed K9 Optical Glass |
|---|---|
| Dimensional Tolerance | ±0.1 mm |
| Surface Flatness | λ/4 @ 633 nm |
| Surface Quality | 3–4 Scratch-Dig |
| Angular Accuracy | ±30 arcseconds |
| Beam Deviation (Tower Error) | <10 arcminutes |
| Edge Bevel | ±0.5 mm |
| Coating Options | Protected Aluminum, UV-Enhanced Aluminum, Protected Silver, Protected Gold, Dielectric HR (D02: 400–800 nm), Dielectric HR (D03: 750–1250 nm) |
| Available Sizes | 5×5×5 mm to 30×30×30 mm |
| Material | Fused Silica |
|---|---|
| Surface Figure | λ/4 @ 633 nm |
| Parallelism | < 3 arcmin |
| Surface Quality | 10-5 (MIL-PRF-13830B) |
| Back Surface | Fine Ground |
| Dimensional Tolerance | +0.0 / –0.1 mm |
| Thickness Tolerance | ±0.2 mm |
| Edge | Protective 45° chamfer, 0.2–0.5 mm |
| Coating Options | Uncoated, Protected Aluminum, UV-Enhanced Aluminum, Protected Silver, Protected Gold |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GM22 |
| Component Category | Optical Element |
| Material | Fused Silica |
| Surface Figure | λ/10 @ 633 nm |
| Parallelism | < 3 arcmin |
| Surface Quality | 10-5 (MIL-PRF-13830B) |
| Back Surface | Fine Ground |
| Dimensional Tolerance | +0.0 / −0.1 mm |
| Thickness Tolerance | ±0.2 mm |
| Edge Treatment | Protective 45° chamfer, 0.2–0.5 mm |
| Coating Options | Uncoated, Protected Aluminum (AL), UV-Enhanced Aluminum (UVAL), Protected Silver (AG), Protected Gold (AU) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic (China) |
| Model | GM23 |
| Price Range | USD 0.15–75.00 (per unit) |
| Component Category | Optical Element |
| Substrate Material | Fused Silica |
| Coating Type | Dielectric High-Reflectivity (HR) |
| Available Configurations | 0° and 45° incidence |
| Wavelength Ranges | 244–257 nm, 300–308 nm, 351–364 nm, 458–528 nm, 266 nm, 355 nm, 532 nm, 1064 nm |
| Avg. Reflectivity | >99.5% (Rₐᵥg) |
| Laser Damage Threshold | >1 kW/cm² (CW, 10 ns pulse) |
| Diameter Options | 12.5 mm, 25.0 mm, 50.0 mm |
| Thickness Options | 6.0 mm, 10.0 mm |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Model | GM24 |
| Unit Price Range | USD 0.15–75.00 (varies by size/coating) |
| Component Category | Optical Element |
| Short Axis A (mm) | 12.50 / 25.00 / 50.00 |
| Long Axis B (mm) | 17.68 / 35.36 / 70.72 |
| Thickness (mm) | 6.0 / 6.0 / 12.5 |
| Coating Options | D02 (High-Reflectance Dielectric, 400–800 nm, 45° AOI), D03 (High-Reflectance Dielectric, 750–1250 nm, 45° AOI) |
| Substrate Material | Synthetic Fused Silica (SiO₂), OH⁻ < 1 ppm, λ/10 surface flatness, scratch-dig 10–5, UV-grade transmission |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic |
| Model | GME |
| Price Range | USD 0.15–75.00 (per unit) |
| Component Category | Optical Element |
| Substrate Material | Float Glass |
| Surface Figure | λ/4–λ/6 @ 25 mm², 633 nm |
| Parallelism | < 3 arcmin |
| Surface Quality | 5 (per MIL-PRF-13830B) |
| Back Surface Finish | Fine Ground or Inspection Polish |
| Dimensional Tolerance | +0.0 / −0.25 mm |
| Thickness Tolerance | ±0.25 mm |
| Edge Treatment | Protective 45° chamfer, 0.2–0.5 mm |
| Coating Options | Protected Aluminum, UV-Enhanced Protected Aluminum, Protected Silver, Protected Gold |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China) |
| Model | GMNF-UV |
| Price Range | USD 0.15–75.00 (varies by diameter and OD) |
| Component Category | Optical Element |
| Optical Density (OD) | 0.1–3.0 |
| Transmission (T) | 79%–0.1% |
| Design Wavelength | 300 nm |
| Available Diameters | Φ12.5 mm, Φ25 mm, Φ50 mm |
| Substrate Material | UV-Fused Silica |
| Coating Type | Metallic (Chromium-based) |
| Surface Quality | 40–20 scratch-dig |
| Flatness | λ/4 @ 633 nm |
| Parallelism | <3 arcmin |
| Damage Threshold | >0.5 J/cm² @ 300 nm, 10 ns pulse |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GMNF-VIS |
| Price Range | USD 1–700 |
| Component Category | Optical Element |
| Optical Density (OD) | 0.1–3.0 |
| Transmission (T) | 79%–0.1% |
| Design Wavelength | 550 nm |
| Available Diameters | Φ12.5 mm, Φ25 mm, 50×50 mm square |
| Substrate Material | Optical Glass (BK7 or equivalent) |
| Coating Type | Vacuum-deposited metallic neutral density film |
| Surface Quality | 60-40 scratch-dig |
| Parallelism | <1 arcmin |
| Clear Aperture | ≥90% of nominal dimension |
| Damage Threshold | >500 MW/cm² (for pulsed lasers, 10 ns @ 1064 nm), >5 W/cm² (CW, 532 nm) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Regional Origin | Domestic (China) |
| Model | GNIF |
| Component Category | Optical Element |
| Center Wavelength (CWL) | 400–1050 nm (±2 to ±7 nm tolerance) |
| Full Width at Half Maximum (FWHM) | 14–75 nm |
| Peak Transmission | >45% to >75% (wavelength-dependent) |
| Available Diameters | Φ12.7 mm & Φ25.4 mm |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model | GNIF |
| Component Category | Optical Element |
| Available Diameters | 12.7 mm & 25.4 mm |
| Center Wavelength Tolerance | ±0.2 to ±2.0 nm |
| FWHM Tolerance | ±0.5 to ±2.0 nm |
| Peak Transmission | 30–40% |
| Substrate Material | Optical-grade fused silica or BK7 (standard) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | GNIF |
| Component Category | Optical Element |
| Center Wavelength Range | 420–636 nm |
| FWHM | 10 nm |
| Minimum Peak Transmittance | 45–75% (varies by wavelength and grade) |
| Available Diameters | 12.7 mm (0.5") and 25.4 mm (1.0") |
| High-Transmission Variant Designation | "-H" suffix |
| Brand | ZOLIX |
|---|---|
| Model | Goniometer35-phi |
| Type | Motorized Precision Tilting Stage |
| Construction | Titanium & Beryllium Copper (Non-Magnetic) |
| Dimensions | 35 × 35 × 16 mm |
| Mass | 70 g |
| Angular Range | ±5° (10° total) |
| Angular Resolution (Closed-Loop) | 0.5 m° |
| Maximum Load | 500 g |
| Pivot Radius | 66 mm |
| Max. Thrust Force | 3 N |
| Drive Voltage | ≤200 V |
| Max. Speed @300 K | 1 °/s |
| Operating Temperature Range | 1.4 K – 400 K (with optional 30 mK and UHV variants) |
| Vacuum Compatibility | Standard: 2×10⁻⁷ mbar |
| UHV Option | 2×10⁻¹¹ mbar |
| Magnetic Field Tolerance | Up to 18 T |
| Sensor Type | Resistive Position Transducer |
| Sensor Range | 12° |
| Cable | Phosphor Bronze Twisted Pair, 20 cm |
| Connector Pins | Drive – 2 pins |
| Housing Material | Pure Ti body, BeCu flexures and electrodes |
| Insulator Materials | Glass-fiber-filled Polyetheretherketone (PEEK), Beryllium Copper contacts |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GP11 |
| Component Category | Optical Element |
| Material | K9 Grade Optically Annealed Crown Glass |
| Dimensional Tolerance | +0.0 / −0.2 mm |
| Surface Flatness | λ/4 @ 632.8 nm |
| Surface Quality | 3–4 Scratch-Dig |
| Angular Accuracy | ±3 arcminutes |
| Beam Deviation (Tower Error) | <10 arcminutes |
| Edge Chamfer | 0.25–0.5 mm × 45° |
| Coating Options | Uncoated, VIS AR (400–700 nm), NIR AR (700–1100 nm), Alumina-Protected Aluminum on Hypotenuse or Legs |
| Material | K9 precision-annealed optical glass |
|---|---|
| Dimensional tolerance | +0.0 / −0.1 mm |
| Surface figure | λ/10 @ 632.8 nm |
| Surface quality | 1–2 scratch-dig |
| Angular accuracy | ±15 arcseconds |
| Beam deviation (tower error) | <5 arcminutes |
| Edge bevel | <0.25 mm × 45° |
| Coating options | Uncoated, VIS/NIR anti-reflection on hypotenuse or legs, aluminum mirror coating on hypotenuse with AR on legs |
| Material | K9 precision-annealed optical glass |
|---|---|
| Dimensional tolerance | +0.0 / −0.1 mm |
| Surface flatness | λ/10 @ 632.8 nm |
| Surface quality | 1–2 scratch-dig |
| Angular accuracy | ±15 arcseconds |
| Beam deviation (tower error) | <5 arcminutes |
| Edge chamfer | <0.25 mm × 45° |
| Coating options | Broadband or laser-line AR coatings per model suffix (e.g., V532, V633, V785) |
| Available sizes | 5.0, 10.0, 12.5, 15.0, 20.0, 25.0 mm (equilateral legs A = B = C) |
| Material | K9 optical glass (precision annealed) |
|---|---|
| Dimensions tolerance | +0.0 / −0.2 mm |
| Surface figure | λ/10 @ 632.8 nm |
| Surface quality | 3–4 scratch-dig |
| Angular accuracy | ±3 arcmin |
| Twist error | <5 arcmin |
| Edge bevel | <0.25 mm × 45° |
| Coating | Optional VIS broadband AR (Ravg < 0.5% @ 400–700 nm) |
| Available sizes | GP14-005 (5 mm), GP14-010 (10 mm), GP14-015 (15 mm), GP14-020 (20 mm) |
| Material | K9 precision-annealed optical glass |
|---|---|
| Dimensions tolerance | +0.0 / −0.1 mm |
| Surface figure | λ/10 @ 632.8 nm |
| Surface quality | 3–4 scratch-dig |
| Roof angle accuracy | ±3 arcseconds |
| Other angular tolerances | ±3 arcminutes |
| Edge chamfer | < 0.25 mm × 45° |
| Coating | Uncoated |
| Clear aperture | Φ9 mm to Φ29 mm (model-dependent) |
| Material | K9 precision-annealed optical glass |
|---|---|
| Diameter tolerance | +0.0 / −0.1 mm |
| Height tolerance | ±0.2 mm |
| Surface flatness | λ/10 @ 632.8 nm |
| Surface quality | 3–4 scratch-dig |
| Edge chamfer | <0.25 mm × 45° |
| Beam deviation | ≤10 arcseconds (model-dependent) |
| Coating options | Uncoated |
| Component category | Optical element |
| Material | K9 optical glass (precision annealed) |
|---|---|
| Dimensional tolerance | +0.0 / −0.2 mm |
| Beam deviation angle | 90° ± 3′ (GP17-005-01) or 90° ± 30″ (other variants) |
| Surface flatness | λ/10 @ 632.8 nm |
| Surface quality | 3–4 scratch-dig |
| Edge chamfer | < 0.25 mm × 45° |
| Coating | Aluminum reflective coating with black paint protection on reflecting faces |
| Component category | Optical element |
| Material | UV-grade fused silica |
|---|---|
| Dimensions tolerance | +0.0 / –0.2 mm |
| Surface flatness | λ/4 @ 633 nm |
| Angular accuracy | ±3 arcmin |
| Beam deviation (prism tilt error) | <10 arcmin |
| Edge chamfer | 0.2–0.5 mm × 45° |
| Surface quality | 3–4 scratch-dig |
| Coating options | Uncoated, UV-enhanced AR (250–400 nm), or Al+dielectric protected front-surface mirror (on hypotenuse) |
| Material | UV-grade fused silica |
|---|---|
| Dimensions tolerance | +0.0 / −0.1 mm |
| Surface flatness | λ/10 @ 632.8 nm |
| Surface quality | 10–5 scratch-dig (MIL-PRF-13830B) |
| Angular accuracy | ±15 arcseconds |
| Beam deviation (tower error) | < 5 arcminutes |
| Edge deletion | 0.25 mm × 45° chamfer |
| Coating options | Uncoated, UV-enhanced AR (250–400 nm), or Al + protected dielectric on hypotenuse |
| Available sizes (A=B=C) | 5.0 mm, 6.3 mm, 10.0 mm, 12.5 mm, 15.0 mm |
| Material | UV-grade fused silica |
|---|---|
| Dimensions tolerance | +0.0 / −0.1 mm |
| Surface flatness | λ/10 @ 632.8 nm |
| Surface quality | 10–5 scratch-dig (MIL-PRF-13830B) |
| Angular accuracy | ±15 arcseconds |
| Beam deviation (tower error) | < 5 arcminutes |
| Edge chamfer | 0.25 mm × 45° |
| Coating options | V-coating @ 355 nm, 532 nm, or 1064 nm (R < 0.25% per surface) |
| Available sizes | 5.0 mm, 10.0 mm, 12.5 mm, and 15.0 mm (equilateral legs A = B = C) |
| Material | UV-grade fused silica |
|---|---|
| Diameter tolerance | +0.0 / −0.1 mm |
| Height tolerance | ±0.2 mm |
| Surface flatness | λ/10 @ 632.8 nm |
| Surface quality | 1–2 scratch-dig |
| Edge break | <0.25 mm × 45° |
| Coating | Uncoated |
| Beam deviation | <3″ (models GP26-012, GP26-025-1, GP26-038, GP26-050) or <10″ (models GP26-008, GP26-025-2) |
| Available diameters | 8.0, 12.7, 25.4, 38.1, 50.8 mm |
| Corresponding heights | 6.0, 10.16, 19.0, 28.5, 37.5 mm |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | GPBS11 |
| Price Range | USD 1–499 |
| Component Category | Optical Element |
| Diameter/Dimensions | Φ12.5 mm, Φ25.0 mm, 12.5×17.5 mm, 25.0×36.0 mm |
| Split Ratios | 20R/80T to 80R/20T |
| Spectral Ranges | VIS (400–700 nm), NIR (700–1100 nm), SWIR (1100–2500 nm) |