Optical Measurement Instruments
Filter
Showing 1351–1380 of 3895 results
| Brand | ELLITOP |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Model | ES01 |
| Spectral Range | 190–25000 nm |
| Spot Size | Manually adjustable from 1–5 mm |
| Angle of Incidence | (A) Motorized variable: 30°–90° |
| (M) Manual variable | 40°–90° |
| Measurement Speed | ≤0.05 s per spectrum (fastest) |
| Single Measurement Time | 1–2 s |
| Sample Compatibility | Supports 4″, 6″, 8″, and 12″ wafers (custom substrates available) |
| Spectral Resolution | ≤0.45 nm (190–1000 nm), ≤3.5 nm (1000–1700 nm), ≤7 nm (1700–2500 nm) |
| Thickness Accuracy | ≤0.4 nm (measured on 100 nm SiO₂ on Si reference standard) |
| Thickness Repeatability | ±0.005 nm |
| Refractive Index Repeatability | ±0.0002 |
| Direct Beam Accuracy | Ψ = 45° ±0.075°, Δ = 0° ±0.05° (10 s averaging, ≥95% of spectral range) |
| Brand | ELLITOP |
|---|---|
| Origin | Beijing, China |
| Model | ES01-PV |
| Spectral Range | 245–1000 nm (UV-Vis-NIR) |
| Spot Size | Manually adjustable, 1–4 mm diameter |
| Angle of Incidence | Manually adjustable, 40°–90° in 5° increments, repeatability ±0.02° |
| Single Measurement Time | 5–10 s for full Ψ/Δ spectrum acquisition |
| Brand | ELLITOP |
|---|---|
| Origin | Beijing, China |
| Model | ESH |
| Spectral Range | 190–2500 nm (customizable) |
| Spot Size | ≤200 µm (customizable, down to 1 µm) |
| Angle of Incidence | Motorized auto-adjustment from 30° to 90° |
| manual fine-tuning range | 40°–90° |
| Single-Measurement Time | 3–5 s (full spectrum) |
| Sample Compatibility | Supports 150 mm (6″), 200 mm (8″), and 300 mm (12″) wafers |
| Measurement Capability | Nanoscale film thickness (sub-Å resolution), complex refractive index (n, k), dielectric function (ε₁, ε₂), bulk optical constants |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Elrepho 070 |
| Pricing | Upon Request |
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | EMIRS50_AT06V_BR26M |
| Housing | TO-46 metal can |
| Emission Spectrum | 2–14 µm (blackbody-like) |
| Modulation Speed | kHz-range electrical modulation (chopper-free) |
| Emission Surface | Integrated reflective cavity (BR26M variant) |
| Window Options | Sapphire or Barium Fluoride (BaF₂) |
| Power Consumption | Low, typically <150 mW operating power |
| Lifetime | >50,000 hours MTTF |
| MEMS Architecture | Silicon-based micro-hotplate with dielectric emissive coating |
| Compliance | RoHS, REACH, ISO 9001-manufactured |
| Brand | Energetiq |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | EQ-77 |
| Core Technology | Laser-Driven Plasma Light Source (LDLS™) |
| Spectral Range | 170–2100 nm |
| Output Power | ~2 W |
| Spectral Radiance | ~40 mW/mm²·sr·nm |
| Numerical Aperture | 0.5 NA |
| Lifetime | >9000 hrs (to 10% radiant flux decay) |
| Cooling Method | Water-Cooled |
| Beam Configuration | Selectable Dual-Beam or Single-Beam (with rear-mounted reflector) |
| Lamp Housing Dimensions | 128 × 175 × 102 mm |
| Controller Dimensions | 152 × 250 × 132 mm |
| Lamp Housing Weight | 2.2 kg |
| Controller Weight | 2.9 kg |
| Brand | Eoptics |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SE-VF |
| Pricing | Upon Request |
| Brand | Hengjiu |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Buccaneer SHG |
| Quotation | Upon Request |
| Pulse Width (FWHM) | < 150–300 fs |
| Wavelength | 1560 ±10 nm |
| Average Output Power | > 100 mW |
| Peak Output Power | Up to 10 kW |
| Repetition Rate | 40–80 MHz |
| Spatial Mode | TEM₀₀ |
| Polarization | Linear |
| Output Coupling | FC/APC Fiber Port (~1 mW Monitoring Tap) |
| RF Sync Output | SMA |
| Mode-Locking Status Monitor | SMA |
| Footprint | Compact Benchtop Design |
| Operation | Single-Key Start-Up |
| Stability | Long-Term Power and Timing Drift < 0.5% RMS over 8 h |
| Brand | SYNOPTICS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Er:YAG |
| Wavelength Emission | 2.94 µm |
| Host Material | Y₃Al₅O₁₂ (YAG) |
| Er³⁺ Doping Concentration | 50 at.% (~7×10²⁰ cm⁻³) |
| Crystal Orientation | [111] ±5° |
| Wavefront Distortion | ≤λ/2 per inch @ 1 µm (double-pass interferometric measurement) |
| Diameter Tolerance | +0.000"/−0.002" |
| Length Tolerance | +0.040"/−0.000" |
| Surface Finish | 55 ±5 µin Ra |
| Edge Chamfer | 0.005" ±0.003" @ 45° ±5° |
| Surface Flatness | λ/10 @ 633 nm |
| Parallelism | ≤30 arcsec |
| Perpendicularity | ≤5 arcmin |
| Surface Quality | 10-5 (MIL-O-13830A) |
| AR Coating | R < 0.25% @ 2.94 µm |
| Coating Adhesion & Durability | Compliant with MIL-C-48497A |
| Pulsed Laser Damage Threshold | >10 J/cm² |
| Pump Band | 600–899 nm |
| Stimulated Emission Cross Section | 3×10⁻²⁰ cm² |
| Upper Laser Level | ⁴I₁₁/₂ → ⁴I₁₃/₂ |
| Origin | Canada |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | EOA-u |
| Price | USD 5,200 (approx.) |
| Core Components | Semiconductor Laser Pump Sources & Integrated EDFA Module |
| Brand | ET Enterprises |
|---|---|
| Origin | United Kingdom |
| Model | 9110v02 |
| Housing Material | Borosilicate Glass Window |
| Spectral Response Range | 280–630 nm |
| Typical Quantum Efficiency | 22–30% |
| Minimum Dark Current | 0.01 nA |
| Maximum Gain | 8 × 10⁷ |
| Rise Time | 1.5 ns |
| Cathode Type | Bialkali (S-20 derivative) |
| Effective Cathode Diameter | 25 mm |
| Operating Temperature Range | –30 °C to +50 °C |
| Base Configuration | 10-stage Linear Focused Dynode Structure |
| Vacuum Integrity | <1 × 10⁻⁶ Pa (long-term stable) |
| Compliance | RoHS 3, CE Marked for EMC Directive 2014/30/EU |
| Brand | EURO TECH |
|---|---|
| Model | ET1301 |
| Measurement Range | 0–100 µg/L (Chlorophyll a) |
| Detection Principle | Pulse-Amplitude Modulated (PAM) Fluorescence |
| Linearity | R² = 0.998 |
| Weight | 0.65 kg |
| Dimensions | 190 × 105 × 60 mm |
| Operating Temperature | 5–40 °C |
| Power Supply | 4 × AA batteries (5 V DC nominal) |
| Data Storage Capacity | 500 measurement sets |
| Environmental Rating | IPX4 (splash-resistant) |
| Sample Cell | 1 × 1 mm quartz cuvette (non-matched, low-sensitivity-to-cell-variability design) |
| Input Parameters | pH, temperature, turbidity (manual entry) |
| Output Interface | ASCII via USB |
| Brand | Eutech |
|---|---|
| Origin | USA |
| Model | TB 1000 |
| Form Factor | Benchtop/Laboratory |
| Measurement Range | 0–1000 NTU |
| Resolution | 0.01 NTU (0–9.99 NTU), 0.1 NTU (10.0–99.9 NTU), 1 NTU (100–1000 NTU) |
| Accuracy | ±2% of reading |
| Repeatability | ≤±1% of reading |
| Response Time | <6 seconds |
| Sample Volume | 30 mL |
| Operating Temperature | 0–40 °C |
| Sample Temperature | 0–50 °C |
| Light Source Options | Tungsten White Light (TB 1000W) or Infrared LED (TB 1000IR) |
| Calibration | 1–3-point automatic, with standard points at 0.02, 10.0, and 1000 NTU |
| Data Output | RS232C |
| Compliance | ISO 7027 (TB 1000IR), US EPA Method 180.1 (TB 1000W), GLP-compliant timestamping and audit trail |
| Power Supply | UL/CSA-certified 12 VDC regulated adapter |
| Housing Material | ABS plastic |
| Dimensions (H×W×D) | 25.4 × 23.7 × 12.1 cm |
| Weight | 1.55 kg (unit), 2.38 kg (packaged) |
| Origin | Singapore |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TB 1000 |
| Product Type | Portable |
| Measurement Range | 0.00–9.99 NTU |
| Resolution | 0.01 NTU (0–9.99 NTU) |
| Operating Temperature | 0–40 °C |
| Accuracy | ±2% of reading |
| Repeatability | ≤±1% of reading |
| Response Time | <6 s |
| Sample Volume | 30 mL |
| Light Source | Tungsten lamp (white light), compliant with US EPA Method 180.1 |
| Calibration | 1–3-point automatic calibration (standard points: 0.02, 10.0, 1000 NTU) |
| Calibration Accuracy | ±0.02 NTU at 0.02 NTU point |
| Data Output | RS232C interface |
| GLP Compliance | Date/time stamping, calibration expiry alerts, audit-ready data logging |
| Enclosure | ABS plastic housing |
| Power Supply | UL/CSA-certified 12 VDC regulated adapter |
| Dimensions (instrument) | 25.4 × 23.7 × 12.1 cm |
| Weight (instrument) | 1550 g |
| Packaging Dimensions | 35.5 × 31.5 × 25 cm |
| Gross Weight | 2380 g |
| Brand | EUTECH |
|---|---|
| Origin | USA |
| Model | TN 100 |
| Type | Portable Turbidimeter |
| Measurement Range | 0–1000 NTU |
| Resolution | 0.01 NTU (0–19.99 NTU), 0.1 NTU (20.0–99.9 NTU), 1 NTU (100–1000 NTU) |
| Accuracy | ±2% of reading ±1 digit (0–500 NTU) |
| Repeatability | ≤±1% of reading |
| Calibration Points | 4-point (0.02, 20.0, 100, 800 NTU) |
| Response Time | <6 seconds |
| Light Source | Infrared LED (850 nm) |
| Sample Volume | 10 mL |
| Operating Temperature | 0–50 °C |
| IP Rating | IP67 |
| Power Supply | 4 × 1.5 V AAA alkaline batteries (>1200 measurements per set) |
| Dimensions (Instrument) | 15.5 × 6.8 × 4.6 cm |
| Weight (Instrument) | 200 g |
| Enclosure Material | ABS plastic |
| Brand | Evolase (Distributed by Auniontech) |
|---|---|
| Wavelength | 1064 nm / 532 nm |
| Avg. Output Power | 3 W @ 1064 nm, 0.6 W @ 532 nm |
| Repetition Rate | 10 kHz – 1 MHz |
| Pulse Energy | >25 µJ @ 1064 nm, >8 µJ @ 532 nm |
| Pulse Width | 0.7–4 ns |
| Beam Delivery | 10/125 µm fiber with FC/APC connector or free-space collimated output |
| Input Voltage | 24 VDC |
| Control Interface | RS232 via D-Sub 9-pin connector |
| Dimensions | 130 × 80 × 80 mm |
| Weight | <1.2 kg |
| Operating Temperature | 15–35 °C |
| Cooling | Conductive + passive fin散热 (no forced air or water required) |
| Brand | Evolase |
|---|---|
| Model | EPFL-PS-1550 / EPFL-NS-1550 |
| Wavelength | 1550 ±1 nm |
| Pulse Width (FWHM) | 35 ps / 1–10 ns |
| Repetition Rate | 100 kHz–2 MHz |
| Avg. Output Power | 1 W / 3 W |
| Pulse Energy | 1 µJ (25 kW peak) / 250 µJ (25 kW peak) |
| Power Stability | <1% RMS |
| Beam Quality (M²) | <1.2 |
| Polarization | Linear or Random |
| Output Fiber | SMF-28, 10/125 µm |
| Trigger | External TTL |
| Operating Voltage | 5.5–12 VDC |
| Dimensions | 230 × 230 × 290 mm |
| Operating Temp. | −10 to +40 °C |
| Relative Humidity | 10–80% non-condensing |
| Ambient Air Class | ISO 9 or better |
| Brand | Evolase (Distributed by Auniontech) |
|---|---|
| Origin | Shanghai, China |
| Model | UKKO-PS (Picosecond), UKKO-NS (Nanosecond) |
| Wavelengths | 1064 nm / 532 nm / 355 nm (UKKO-PS) |
| Avg. Power | Up to 70 W @ 1064 nm (UKKO-PS), 10 W (UKKO-NS) |
| Pulse Width | ~50 ps (UKKO-PS), ns-range (UKKO-NS) |
| Repetition Rate | 10 Hz – 20 MHz (adjustable) |
| Pulse Energy | Up to 60 µJ (UKKO-PS) |
| Output | Free-space and fiber-coupled options |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |
| Brand | Qioptiq |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | iFLEX-iRIS-488 |
| Core Technology | Single Transverse/Longitudinal Mode Semiconductor Laser |
| Output Power | 25 mW |
| Beam Diameter (1/e²) | 0.7 mm |
| Beam Divergence | Diffraction-Limited |
| Beam Quality | TEM₀₀, M² < 1.1 |
| Power Stability (8 h) | < 0.5% RMS |
| Intensity Noise | < 0.05% RMS (20 Hz – 20 MHz) |
| Polarization Ratio | >200:1 (Vertical) |
| Polarization Axis Tolerance | ±2° |
| Beam Pointing Stability | <1 µrad/°C |
| Dimensions | 70 mm × 40 mm × 38 mm |
| Brand | Excelitas |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | SPCM-AQRH / SPCM-AQRH-XX-TR |
| Wavelength Range | 400–1060 nm |
| Peak Photon Detection Efficiency (PDE) | >70% @ 700 nm (standard) |
| Active Area Diameter | 180 µm |
| Timing Resolution | <250 ps (TR variant) |
| Maximum Count Rate | >35 Mcps |
| Output | TTL-compatible, 50 Ω terminated via BNC |
| Power Supply | +5 V DC only |
| Operating Temperature Stability | Engineered for low-drift performance in lab environments |
| Key | Wavelength Options: 157 nm, 193 nm, 222 nm, 248 nm, 308 nm, 351 nm |
|---|---|
| Pulse Energy | 0.3–360 mJ per pulse |
| Repetition Rate | 60–300 Hz |
| Pulse Width | 2.5–27 ns (FWHM) |
| Gas Lifetime | Up to 10⁷ pulses per gas fill (gas-dependent) |
| Thyratron Warranty | 2 years or 3×10⁸ shots |
| Brand | Fangyuan Instruments |
|---|---|
| Origin | Shenzhen, China |
| Manufacturer Type | Authorized Distributor |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Form Factor | Portable |
| Optical Geometry | d/8° Integrating Sphere |
| Illumination/Viewing Condition | 8°/d (8° illumination / diffuse viewing), with Specular Component Included (SCI) |
| Spectral Range | L*: 1–100 |
| Repeatability | ΔE*ab standard deviation ≤ 0.08 (measured 30 times on white calibration tile) |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | FASTLIGHT Pixel-Based Beam Steering System |
| Steering Frequency | Up to 200 kHz (pixel-switching rate) |
| Power Handling | Up to 2000 W CW at 1070 nm |
| Beam Spot Size | Down to 50 µm (single pixel) |
| Pixel Array | Configurable 1D/2D matrix, up to 1000 pixels |
| Maximum Jump Velocity | 200,000 m/s (over 100 mm array length) |
| Optical Compatibility | Compatible with commercial CW & pulsed lasers, f-θ lenses, galvanometers, polygon scanners |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | FG-5000 |
| Price Range | USD 28,000–42,000 |
| Instrument Type | Benchtop Spectrophotometric Color Measurement System |
| Optical Geometry | 0°/45° Integrating Sphere |
| Illuminant | High-Stability LED Array |
| Spectral Range | 350–700 nm |
| Spectral Resolution | 10 nm |
| Repeatability (ΔE*ab) | ≤0.03 |
| CIE Standard Observers | 2° & 10° |
| Color Spaces | CIE L*a*b*, L*C*h*, ΔE*ab, ΔE*00, CMC(l:c), DIN99d |
| Compliance | ISO 105-A02, ISO 105-A03, ISO 105-A04, ISO 105-B02, ISO 105-X12, ISO 11664-4, ASTM D2244, AATCC TM16, AATCC TM20, AATCC TM8, AATCC TM165, GB/T 3920, GB/T 8427, GB/T 4802.1 |
| Brand | FEMTOEASY |
|---|---|
| Origin | France |
| Model | BeamPro |
| Sensor Types | CMOS (UV–Vis–NIR), InGaAs (SWIR) |
| Pixel Sizes | 1.45–33.00 µm |
| Spectral Ranges | 190–1100 nm (UV-extended), 375–1100 nm, 400–1700 nm, 900–1700 nm |
| Max Resolution | 5472 × 3648 (20.0 MP) |
| Min Measurable Beam Diameter (FWHM) | ≤10 µm (CMOS), ≤25 µm (InGaAs) |
| Shutter Types | Rolling & Global |
| Interface | USB 3.1 (standard), GigE (TE-cooled SWIR models) |
| Bit Depth | 12/16-bit (HDR option available) |
| Trigger Support | Yes (hardware & software sync) |
| Vacuum Compatibility | Select models (upon request) |
| Brand | FEMTOEASY |
|---|---|
| Origin | France |
| Model Series | FROG-FC, FROG-FS, FROG-PS1, FROG-PS3 |
| Spectral Range | 480–2100 nm (FAST FROG), 500–2100 nm (MS-FROG) |
| Pulse Duration Coverage | 4 fs – 80 ps |
| Detection | CMOS, 12-bit, 3 Mpx, 72 dB dynamic range |
| Interface | USB 3.1 |
| Beam Height | 69–148 mm |
| Dimensions | 326 × 194 × 129 mm |
| Brand | FEMTOEASY |
|---|---|
| Origin | France |
| Model | Nano4th (1064 nm / 532 nm / 266 nm) |
| Output Wavelengths | 1064 nm, 532 nm, 266 nm |
| Average Power (at 80 MHz) | 2 W @ 1064 nm, 1 W @ 532 nm, 750 mW @ 266 nm, 170 mW @ 266 nm (4th harmonic) |
| Pulse Duration | <120 fs (fundamental & SHG), <65 fs (THG), <60 fs (estimated for 4th harmonic) |
| Repetition Rate | 80 MHz |
| Conversion Efficiency | >45% (SHG), >35% (THG), >8% (4th harmonic) |
| Polarization | Vertical (1064 nm), Horizontal (532 nm), Vertical (266 nm) |
| Laser Compatibility | 1030–1064 nm fundamental, nJ-level pulse energy, MHz-repetition-rate ultrafast oscillators |
| Brand | FEMTOEASY |
|---|---|
| Origin | France |
| Model Series | FC, FS, PS1, PS3, PS5, PS10, µ-ROC, MS-ROC, MS-ROC-LP, MS-ROC-SP, MS-ROC-SLP |
| Wavelength Range | 480–2200 nm |
| Pulse Duration Coverage | 4 fs – 80 ps |
| Input Repetition Rate | Single-shot to GHz |
| Detection | CMOS, 12-bit, 3 Mpx, 72 dB dynamic range |
| Interface | USB 3.1 (GigE optional) |
| Beam Height Adjustment | 30 mm (standard), up to 148 mm (MS-series) |
| Integrated ND Filter Wheel | Yes |
| Polarization Requirement | Linear (horizontal or vertical) |
| Trigger Support | External TTL sync up to 125 kHz (with Enhanced Detection option) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MERCURY |
| Price Range | USD $13,500 – $40,800 (FOB) |
| Core Configuration | Solid-State Mode-Locked Fiber Laser Platform |
| Key | Origin: USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FR-103 |
| Price Range | USD 6,800 – 13,600 |