Rubber & Plastic Industry Specialized Instruments
Filter
Showing 211–240 of 465 results
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TMJ-9729 |
| Light Irradiance at 340 nm | 0.5 ± 0.05 W/m² |
| Broadband Irradiance (300–800 nm) | 60 ± 6 W/m² |
| Lamp Type | 6500 W Water-Cooled Xenon Arc Lamp |
| Filter Options | Borosilicate (267–800 nm) or Soda-Lime (300–800 nm) |
| Chamber Interior | SUS#304 Stainless Steel, Matte Finish |
| Airflow Velocity in Test Chamber | 1.5 m/s |
| Sample Capacity | ≥76 Standard Specimens (38 Aluminum Test Racks × 2 Layers) |
| Black Panel Temperature Range | 0.0–120.0 °C |
| UV/VIS Radiometer | ELSEC UV/VIS Transducer (290–400 nm, 0–200 W/m²) |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | XTR20 / XTR25 |
| Extruder Type | Single-Screw Cast Film Extruder |
| Die Material | Special Alloy Steel |
| Chill Roll Configuration | Single, Dual, or Triple Roll |
| Web Width Range | 100–500 mm |
| Optional Features | Unwind Unit for Extrusion Coating, In-Line Gel Detection System |
| Supply Type | Imported Equipment |
| Distributor Status | Authorized General Distributor |
| Brand | Labtech Engineering |
|---|---|
| Origin | Imported (Non-China) |
| Model | LBM-125/250 |
| Drive System | Full Hydraulic |
| Control Interface | LCD Touchscreen (Auto/Manual Mode) |
| Safety Features | Interlocked Acrylic Viewing Door, Multi-Stage Alarm System |
| Compatible Resins | LDPE, HDPE, PP, PC, PS, PET |
| Optional Integration | Labtech Single-Screw Extruder (Φ20/25/30/45 mm) |
| Application Scope | Color Masterbatch Development, Rapid Formulation Screening, Pre-Production Bottle Prototyping |
| Brand | Labtech Engineering |
|---|---|
| Origin | Imported (Non-China) |
| Model | LCR |
| Screw Options | 12.5 mm, 20 mm, 25 mm, 30 mm, 45 mm |
| Max Film Width | 1100 mm |
| Min Film Width | 50 mm |
| Max Layers | 9 |
| Die Type | High-Performance T-shaped (Coat-Hanger) Cast Die |
| Winding | Pneumatic Shaft (Paperless) with Multiple Winding Configurations |
| Optional Units | Cast Roll Stack, Calender Roll Stack |
| Form Factor | Benchtop to Floor-Mounted Configurations Available |
| Brand | Labtech Engineering |
|---|---|
| Origin | Sweden |
| Model | LEP 20-6 |
| Screw Diameter | 20 mm |
| Target Tubing ID Range | 4–6 mm (customizable) |
| Vacuum Sizing & Cooling Tank | Integrated |
| Haul-off System | Belt-driven, variable-speed |
| Winder | Stepless-speed, tension-controlled |
| Optional | Laser-based diameter measurement system |
| Multi-layer Co-extrusion Capability | Yes |
| Compliance | Designed for ISO 13485-aligned R&D environments and ASTM D2136/D3835-compliant polymer processing validation |
| Brand | Labtech Engineering |
|---|---|
| Origin | Sweden |
| Model | LEP 45-50 |
| Screw Diameter | 45 mm |
| Pipe Diameter Range | 25–50 mm (customizable) |
| Configuration | Single-screw extruder with vacuum sizing tank, belt-type haul-off, automatic pipe cutter |
| Optional | Auto-stacking unit, laser diameter measurement system, multi-layer co-extrusion capability |
| Brand | Labtech Engineering |
|---|---|
| Origin | Imported |
| Model | LF-600 |
| Screw Options | 12.5 mm, 20 mm, 25 mm, 30 mm, 45 mm |
| Max Layflat Width | 1000 mm |
| Max Layers | 11 |
| Winding | Dual-station air-expanding shaft (coreless) |
| Tower Height | Adjustable |
| Cooling Ring | High-efficiency annular air ring |
| Die Type | High-performance spiral mandrel die |
| Form Factor | Benchtop to floor-standing configurations available |
| Brand | Labtech Engineering |
|---|---|
| Roll Diameter | 150 mm |
| Configuration | Horizontal Open Two-Roll Mill |
| Drive Type | Variable-Frequency AC Motor with Precision Speed Control |
| Roll Surface | Chrome-Plated Steel |
| Roll Gap Adjustment | Manual Micrometer with Digital Readout |
| Safety Compliance | CE Marked, EN ISO 13857 & EN 61800-5-1 Compliant |
| Construction | Heavy-Duty Cast Iron Frame with Reinforced Bearing Housings |
| Temperature Control Option | Optional Water-Cooled or Electrically Heated Rolls (±1 °C Stability) |
| Power Supply | 380–415 V, 3-Phase, 50/60 Hz |
| Dimensions (L×W×H) | 1850 × 920 × 1280 mm |
| Weight | Approx. 1,450 kg |
| Brand | Labtech Engineering |
|---|---|
| Origin | Imported (Non-Chinese) |
| Model Range | LTE12, LTE16, LTE20, LTE26, LTE36 |
| Screw Diameter | 12–36 mm |
| L/D Ratio | 32–60 |
| Barrel Design | Split-shell (clamshell), modular |
| Screw & Barrel Material | Nitrided high-grade tool steel |
| Control System | PC-based fully automated control |
| Optional Modules | Vacuum venting port, liquid dosing pump, side-feeding fiberglass inlet, Labtech side-cutting granulator |
| Cooling | Integrated internal recirculating cooling system |
| Safety | Multi-level interlock alarms, gravity-balanced hinge mechanism, replaceable barrel liners |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | C106H |
| Price | Upon Request |
| Test Principle | Differential Pressure (Manometric) Method |
| Standards Compliance | ISO 15105-1, ISO 2556, GB/T 1038-2000, ASTM D1434, JIS K7126-1, YBB 00082003 |
| Temperature Range | 15–50 °C (standard), 5–60 °C (optional) |
| Humidity Range | 0% RH (dry), 5–90% ±2% RH (optional) |
| Test Gases | O₂, N₂, CO₂, CH₄, H₂ (CH₄/H₂ configurable) |
| Test Area | 38.48 cm² per chamber |
| Sample Thickness Limit | ≤3 mm |
| Vacuum Resolution | 0.01 Pa |
| Vacuum Accuracy | ±0.2% of reading (1–100% sensor span) |
| Vacuum Level | ≤10 Pa |
| Pressure Control Range | 10–150 kPa (adjustable, stability ±0.2 kPa) |
| Gas Transmission Rate (GTR) Range | 0.01–50,000 cm³/m²·24h·0.1MPa |
| GTR Resolution | 0.001 cm³/m²·24h·0.1MPa |
| Temperature Stability | ±0.15 °C |
| Chamber Count | 6 independent test chambers |
| Sample Size | 11.2 cm × 11.2 cm |
| Power Supply | 120 VAC ±10%, 60 Hz or 220 VAC ±10%, 50 Hz |
| Net Weight | 100 kg |
| Dimensions | 600 mm × 490 mm × 660 mm |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | C206H |
| Test Principle | Isobaric Coulometric Sensor Method (ASTM D3985) |
| Standards Compliance | ASTM D3985, ASTM F1307, GB/T 19789, GB/T 31354, DIN 53380-3, JIS K7126-2-B, YBB 00082003-2015 |
| Test Range | 0.02–200 cc/(m²·day) @ 50 cm² (standard) |
| Resolution | 0.0001 cc/(m²·day) |
| Repeatability | ±0.02 cc/(m²·day) or ±1%, whichever is greater |
| Temperature Range | 15–50 °C (standard) |
| Temp Stability | ±0.15 °C |
| Humidity Range | 0%, 5–90% RH ±2% |
| Test Chambers | 6 independent chambers |
| Chamber Area | 50 cm² (standard) |
| optional MASK areas | 5 cm² or 1 cm² |
| Sample Size | 11.2 cm × 11.2 cm (4.4" × 4.4") |
| Max Sample Thickness | 3 mm (120 mil) |
| Gas Requirements | ≥99.999% N₂ (carrier), ≥99.5% O₂ (permeant side) |
| Interface | 1/8" metal tubing |
| Dimensions | 600 × 490 × 660 mm |
| Power | 120 VAC ±10%, 60 Hz OR 220 VAC ±10%, 50 Hz (user-selectable) |
| Weight | 100 kg (220 lbs) |
| Sensor | ppb-level coulometric O₂ sensor (3× service life vs. conventional) |
| Brand | Labthink |
|---|---|
| Model | C230H |
| Principle | Isobaric Coulometric Sensor Method (ASTM D3985 compliant) |
| Test Range | 0.01–200 cm³/(m²·day) |
| Resolution | 0.001 cm³/(m²·day) |
| Repeatability | ±0.01 cm³/(m²·day) or ±2% (whichever is greater) |
| Temperature Control | 10–55 °C (±0.2 °C) |
| Humidity Control | 0% RH, 5–90% RH (±1% RH), 100% RH |
| Test Chambers | 3 independent |
| Sample Area | 50 cm² (standard) |
| Max. Sample Size | 108 mm × 108 mm |
| Max. Thickness | ≤3 mm |
| Package Testing Capacity | up to 3 L (optional) |
| Carrier Gas | ≥99.999% N₂, ≥0.28 MPa (40.6 psi) |
| Interface | 1/8″ stainless steel tubing |
| Data Compliance | CFR 21 Part 11, GMP-ready, DataShield™ audit-trail enabled |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic |
| Model | C230H |
| Pricing | Upon Request |
| Test Principle | Coulometric Oxygen Sensor + Isobaric Method |
| Standards Compliance | ASTM D3985, ASTM F1307, ASTM F1927 (optional), GB/T 19789, GB/T 31354, DIN 53380-3, JIS K7126-2-B, YBB 00082003-2015 |
| Film OTR Range | 0.01–200 cm³/(m²·day) |
| Container OTR Range | 0.00005–1 cm³/(pkg·day) |
| Resolution | 0.001 cm³/(m²·day) |
| Repeatability | ±0.01 cm³/(m²·day) or ±2%, whichever is greater |
| Test Temperature | 10–55 °C (±0.2 °C) |
| RH Control | 0%, 5–90% (±1%), 100% (O₂ side) |
| Test Chambers | 3 independent chambers |
| Sample Size | 108 mm × 108 mm |
| Max Sample Thickness | ≤3 mm |
| Standard Test Area | 50 cm² |
| Carrier Gas | ≥99.999% high-purity N₂ (user-supplied) |
| Inlet Pressure | ≥0.28 MPa (40.6 psi) |
| Gas Interface | 1/8″ stainless steel tubing |
| Max Container Volume | 3 L (optional) |
| DataShield™ Data Integrity Module | Optional |
| GMP-Compliant Software & Audit Trail | Optional |
| 21 CFR Part 11 Compliance Support | Optional |
| Brand | Labthink |
|---|---|
| Model | C390H |
| Measurement Principle | Infrared Detection of Water Vapor |
| Standards Compliance | ASTM F1249, ISO 15106-2, GB/T 26253, JIS K7129, YBB00092003-2015 |
| Test Range | 0.005–40 g/(m²·day) (film), 0.0003–2.6 g/(100in²·day), 0.000025–0.2 g/(pkg·day) (containers) |
| Resolution | 0.0001 g/(m²·day) |
| Repeatability | ±0.005 g/(m²·day) or ±2% (whichever is greater) |
| Temperature Control | 10–55 °C (±0.2 °C) |
| Humidity Control | 5–90 % RH (±1 % RH), up to 100 % RH |
| Test Chambers | 3 independent, integrated cavities |
| Sample Area | 50 cm² (standard) |
| Max Container Volume | 3 L |
| Sample Dimensions | ≤108 mm × 108 mm × 3 mm |
| Carrier Gas | 99.999% pure N₂, inlet pressure ≥0.28 MPa (40.6 psi) |
| Gas Interface | 1/8″ stainless steel tubing |
| Data Management | DataShield™ audit-trail-enabled software |
| Regulatory Support | Optional 21 CFR Part 11 compliance, GMP-compliant computer system validation package |
| Brand | Labthink |
|---|---|
| Model | C631H |
| Origin | Shandong, China |
| Manufacturer | Labthink Instruments Co., Ltd. |
| Application | Rubber & Plastic Industry |
| Standards Compliance | GB/T 34848, ISO 14616:1997, DIN 53369:1976 |
| Force Sensor Range | 5 N (standard), optional 10 N / 30 N |
| Force Accuracy | ±0.5% of reading (10–100% FS), ±0.05% FS (0–10% FS) |
| Force Resolution | 0.001 N |
| Displacement Range | 0.1–95 mm |
| Displacement Accuracy | ±0.1 mm |
| Shrinkage Rate Range | 0.1–95% |
| Temperature Range | Ambient to 210 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Accuracy | ±0.5 °C (single-point calibration) |
| Test Stations | 1 station (2 specimens simultaneously) |
| Specimen Size | 110 mm × 15 mm |
| Dimensions | 480 × 400 × 630 mm (L×W×H) |
| Weight | 26 kg |
| Power Supply | 220 VAC ±10%, 50 Hz / 120 VAC ±10%, 60 Hz |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Labthink FT-F1 |
| Temperature Range (Hot Chamber) | Ambient to 150 °C (optional up to 280 °C) |
| Hot Chamber Temperature Stability | ±0.1 °C at 150 °C |
| Cold Chamber Temperature Range | 0–100 °C |
| Cold Chamber Temperature Stability | ±0.1 °C |
| Hot Chamber Dimensions (L×W×H) | 670 × 490 × 540 mm |
| Cold Chamber Dimensions (L×W×H) | 400 × 220 × 520 mm |
| Test Stations | 6 (simultaneous sample + blank testing) |
| Compliance | ASTM D5330, ISO 6452, DIN 75201, SAE J1756, GB/T 27630 |
| Brand | Labthink |
|---|---|
| Model | RSY-R2 |
| Application | Thermal shrinkage measurement of pharmaceutical PVC hard sheets, aluminum-plastic blister laminates, shrink films, and thermoplastic packaging substrates |
| Temperature Range | Ambient to 200 °C |
| Temperature Control Accuracy | ±0.3 °C |
| Specimen Size Capacity | ≤140 mm × 140 mm |
| Heating Medium | Liquid bath (oil or water, user-selectable) |
| Control System | Microprocessor-based PID temperature regulation with LCD menu interface |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 440 mm × 370 mm × 310 mm |
| Net Weight | 24 kg |
| Compliance | ASTM D2732, GB/T 13519–1992, YY/T 0698.3–2011 (for pharmaceutical packaging) |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic Instrument |
| Model | W3/062 |
| Pricing | Available Upon Request |
| Brand | Lishumei |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TY-7003H4 |
| Screw Diameter | 20 mm |
| Length-to-Diameter Ratio | 20:1 |
| Clamping Force | 150 kN (15 t) |
| Maximum Shot Volume | 28 cm³ |
| Overall Dimensions | 1766 × 600 × 1226 mm |
| Barrel Temperature Range | RT to 450 °C |
| Mold Temperature Control (Optional) | RT+10 °C to 200 °C, ±0.5 °C stability |
| Power Supply | 3-phase 5-wire AC 380 V ±10%, 50/60 Hz, 6.5 kW |
| Brand | Lishumei |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TY-7003YZ |
| Price Range | USD 2,800–5,600 (FOB Jiangsu) |
| Overall Dimensions | 600 × 450 × 1500 mm |
| Heating Power | 1.5 kW |
| Voltage | 220 V ±10%, 50 Hz |
| Single-Batch Feed Capacity | ≈20 g |
| Mold Temperature Range | 0–150 °C |
| Barrel Temperature Range | 0–300 °C |
| Rated Hydraulic Pressure | 0.6 MPa |
| Applicable Mold Types | ASTM D638/D790/D256/D1928 compliant test specimen molds (dumbbell tensile, flexural, Izod/Charpy impact, color plaques) |
| Brand | Lishumei |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TY-7008DP |
| Price Range | USD 24,000 – 36,000 (FOB China) |
| Screw Diameter | 25 mm |
| Overall Dimensions | 600 × 4800 mm |
| L/D Ratio | 32:1 |
| Drive Type | Servo Motor (Direct Drive) |
| Main Motor Power | 1.5 kW |
| Gearbox Reduction Ratio | 15:1 |
| Screw Speed Range | 1–150 rpm |
| Heating Zones | 4 |
| Total Heater Power | 5 kW |
| Temperature Range | Ambient to 380 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Pressure Measurement Range | 0.1–100 MPa |
| Compression Ratio | 2.5:1 |
| Cooling Method | KAKU Ball-Bearing Insert Fan Assembly |
| Brand | Lishumei |
|---|---|
| Model | TY-7008FPV |
| Screw Diameter | 20 mm |
| L/D Ratio | 1:28 |
| Max Output | 3–5 kg/h |
| Screw Speed | 1–95 rpm |
| Compression Ratio | 2.4:1 |
| Zone Temperatures | Up to 360 °C (4 heating zones + die) |
| Melt Pressure Range | Inlet 0–10 MPa, Outlet 0–35 MPa |
| Pressure Accuracy | ±0.1% FS |
| Melt Temperature Accuracy | ±0.5 °C |
| Melt Pump Displacement | 3 cm³/rev, Max Speed 60 rpm, Max Pressure 270 bar |
| Main Motor Power | 1.5 kW |
| Total Heating Power | 5 kW |
| Overall Dimensions | 1050 × 570 × 1390 mm (L×W×H) |
| Weight | ~300 kg |
| Filter Assembly | Aluminum-framed, multi-layer stainless steel woven mesh |
| Brand | Lishumei |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TY-7010 |
| Price Range | USD 2,800–5,600 (FOB) |
| Dimensions | 350 × 285 × 640 mm |
| Heating + Motor Power | ≤0.5 kW |
| Voltage | 220 V ±10%, 50 Hz |
| Single Batch Capacity | 20–30 g |
| Temperature Range | Ambient to 300 °C (customizable) |
| Key Features | Screw Diameter 20 mm |
|---|---|
| L/D Ratio 1 | 20 |
| Mold Dimensions Support | 360 × 90 × 72 mm (L×W×H) |
| Machine Footprint | 1700 × 500 × 950 mm |
| Brand | LLOYD |
|---|---|
| Origin | United Kingdom |
| Model | MFI10 |
| Compliance Standards | BS 2782-7:1994 Method 720A, ISO 1133-1:2011, ASTM D1238 Methods A & B, ASTM D3364, DIN 53735, NF T51-016, UNE 53098, UNI 5640–74 |
| Temperature Control Accuracy | ±0.2 °C |
| Load Range | 0.325–21.6 kg (standard weights supplied per ISO/ASTM), |
| Sample Diameter | 9.55 ±0.025 mm |
| Die Dimensions | 2.095 ±0.005 mm diameter × 8.00 ±0.025 mm length |
| Data Reproducibility | CV ≤ 1.5% (per ISO 1133 repeatability requirement) |
| Software | Nexygen v5.x with GLP-compliant audit trail and 21 CFR Part 11 optional modules |
| Brand | Metrohm |
|---|---|
| Origin | Switzerland |
| Manufacturer | Metrohm AG |
| Product Type | Imported Instrument |
| Model | 895 Professional |
| Pricing | Upon Request |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Model | Microex Blown |
| Type | Benchtop Single-Layer Blown Film Extrusion System |
| Screw Diameter | 20 mm |
| Configuration | Integrated Microextruder, Air Ring, Haul-Off, and Winder |
| Application Scope | QC Testing of Recycled Polymers, Color Masterbatches, Additive-Loaded Compounds, and Biopolymers |
| Compliance Context | Designed for R&D-scale process simulation per ISO 1133 (melt flow index correlation), ASTM D2657 (blown film processing guidelines), and internal GLP-compliant lab protocols |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Model | Microex Cast |
| Screw Diameter | 17.5 mm |
| Film Width | 100 mm (max) |
| Thickness Range | 10–1000 µm |
| Output Capacity | 1 kg/h (max) |
| Layers | Single-layer |
| Drive Power | 3 kW |
| Control Interface | 7-inch Touchscreen HMI |
| Connectivity | LAN + USB data export |
| Optional | In-line gel detection system |
| Compatible Materials | HDPE, LDPE, LLDPE, PP, PA, PMMA, TPU, EVOH, EVA, Biopolymers |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Model | MicroEx CP Twin |
| Screw Diameter | 12 mm |
| L/D Ratio | 40:1 |
| Motor Power | 3 kW |
| Throughput (PE reference) | up to 1 kg/h |
| Pellet Size | 1–3 mm |
| Temperature Zones | 4 independent zones |
| Drive System | Brushless DC motor, 2.1 N·m torque, direct-coupled |
| Feeding | Volumetric feeder with stainless steel hopper and feed throat cooling |
| Barrel Cooling | Softened water circulation through transverse bores in rectangular barrel modules |
| Barrel & Screw Material | Wear-resistant alloy steel |
| Die Assembly | Interchangeable bronze nozzles, precision-calibrated |
| Granulator | Pneumatically actuated rubber-coated traction roller + hardened steel cutter (18 mm width), adjustable stationary knife |
| Control System | 7" HMI touchscreen with PID temperature control, real-time current/pressure/temperature monitoring, alarm logging, USB data export, LAN-ready for remote diagnostics |
| Compliance | Designed for GLP-compliant lab-scale polymer compounding and granulation |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Model | Microex SP |
| Type | Laboratory-Scale Melt Spinning System with Integrated Twin-Screw Microextruder |
| Application | Thermoplastic Polymer Fiber Development (PP, PA, PET) |
| Configuration | Benchtop, Modular, Vacuum-Ready, Air-Cooled Die Assembly |
| Compliance | CE Marked, ISO 9001–Certified Manufacturing |