- All
- Favorite
- Popular
- Most rated
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Oxi7310 |
| Instrument Type | Benchtop (not portable — corrected per technical specification) |
| Measurement Principle | Electrochemical (Clark-type polarographic sensor) |
| Dissolved Oxygen Range | 0.00–19.99 mg/L |
| Accuracy | ±0.5% of reading |
| Data Storage | 5,000 automatic / 500 manual entries |
| Pressure Compensation | Automatic (integrated barometric sensor, 500–1100 mbar) |
| Salinity Compensation | Manual (0.0–70.0 g/kg) |
| Temperature Range | 0.0–50.0 °C |
| Temperature Accuracy | ±0.1 °C |
| Interface | Mini-USB |
| Display | Backlit LCD with graphical capability |
| Power | AC adapter, 4×AA alkaline batteries, or USB bus power |
| Battery Life | Up to 800 h (backlight off), 100 h (backlight on) |
| Compliance | GLP/AQA-compliant data logging with audit trail support |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Multi 9630 |
| Instrument Type | Portable/Laboratory Multiparameter Water Quality Analyzer |
| Detection Principle | Electrochemical (pH, ORP, Conductivity, DO) + Optical (Turbidity) |
| Measured Parameters | pH, ORP, Dissolved Oxygen (DO), Conductivity, Turbidity |
| Display | Backlit Graphic LCD |
| Data Storage | 10,000 automatic / 500 manual entries |
| Measurement Channels | 3 simultaneous IDS probe inputs |
| Connectivity | USB-B, USB-A (for printer/storage), optional wireless module |
| Compliance | QSC (Quality Sensor Control), CMC (Continuous Measurement Control), IP43 enclosure |
| Power | 4 × 1.5 V AA batteries or USB-B powered |
| Probe Interface | Digital IDS (Intelligent Digital Sensor) with auto-recognition and embedded calibration memory |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | CR 4200 |
| Digestion Method | Rapid Thermal Digestion |
| Heating Blocks | Dual independent 12-position blocks |
| Sample Capacity | 24 × 16 mm OD reaction tubes |
| Temperature Range | 25–170 °C |
| Time Range | 0–180 min |
| Temperature Accuracy | ±1 °C |
| Temperature Stability | ±0.5 K |
| Overtemperature Protection | 190 ±5 °C |
| Heating Rate | 25→100 °C in ≤5 min, 25→120 °C in ≤7 min, 25→148 °C in ≤10 min |
| Power Supply | 230 VAC/50 Hz or 115 VAC/60 Hz |
| Power Consumption | 560 W |
| Operating Temperature | +5 to +40 °C |
| Storage Temperature | –25 to +65 °C |
| Dimensions (W×D×H) | 292 × 245 × 180 mm |
| Weight | 3.6 kg |
| Communication Interface | RS-232 |
| Certified Compliance | GS, CE, cETLus |
| Optional Accessory | External temperature probe TFK CR (Art. No. 250100) |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Pro20 |
| Instrument Type | Laboratory Water Quality Analyzer |
| Measurement Principle | Electrochemical Methods |
| Measurable Parameters | pH, ORP, Conductivity, Dissolved Oxygen (DO), Turbidity, mV |
| Channel Configuration | Dual electrically isolated measurement channels |
| Display | 7-inch high-brightness color touchscreen with chemically strengthened sanitary glass |
| Sensor Interface | IDS (Intelligent Digital Sensors) compatible, supports optional wireless module |
| Compliance | Designed for GxP environments |
| Data Export Formats | PDF/A, JSON, CSV |
| Software Features | QSC (Quality Sensor Check), AutoRead, customizable calibration buffers & methods, LIMS integration support |
| Operating Environment | Suitable for fume hoods, biosafety cabinets, and cleanroom-grade labs |
| Glove-Compatible Touchscreen | Yes, resistant to ethanol and common disinfectants |
| ISE Compatibility | Planned future expansion (not yet available) |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | P 700IQ |
| Measurement Principle | Vanadomolybdate Photometric Colorimetry (PO₄–P) |
| Range 1 | 0.05–15.00 mg/L PO₄–P |
| Range 2 | 1–50 mg/L PO₄–P |
| Resolution | 0.05 mg/L (Range 1), 1 mg/L (Range 2) |
| Accuracy | ±2% or ±0.05 mg/L (Range 1), ±2% or ±1 mg/L (Range 2) |
| t₉₀ Response Time | <5 min |
| Minimum Measurement Interval | Adjustable to <5 min |
| Sample Temperature | 4–45 °C |
| pH Range | 5–9 |
| Operating Temperature | –20–40 °C |
| Storage Temperature | –20–50 °C |
| Reagent Consumption | 2500 mL per 8 months (Range 1), 2500 mL per 4 months (Range 2), 1000 mL cleaning solution per 4 months |
| Power Supply | 115/230 V AC |
| Dimensions | 678 × 780 × 395 mm |
| Weight | ~30 kg (excl. reagents) |
| Outputs | Analog (4–20 mA), IQ SENSOR NET 2020XT interface |
| Certifications | CE, cETLus |
| Enclosure Rating | IP65 (integrated cabinet) |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | FDO925 |
| Instrument Type | Portable |
| Measurement Principle | Fluorescence Quenching |
| Measurement Range | 0.00–20.00 mg/L |
| Response Time (T99) | <60 s |
| Temperature Range | 0–50.0 °C ± 0.2 °C |
| DO Accuracy | ±0.5% of reading |
| Saturation Range | 0–200.0 % |
| Partial Pressure Range | 0–200 hPa ± 0.5% of reading |
| Electrode Material | POM body with stainless steel tip |
| Dimensions | 140 mm ± 1 mm (L) × 15.3 mm ± 0.2 mm (Ø) |
| Cable Options | 1.5 m, 3 m, 6 m, 25 m (Kevlar-reinforced) |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Multi 3620 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Detection Principle | Electrochemical Sensing (pH, ORP, Conductivity, DO) & Nephelometric Turbidity Measurement |
| Measured Parameters | pH, ORP, Dissolved Oxygen (DO), Conductivity, Turbidity (NTU/FNU) |
| Display | Color Graphic LCD |
| Data Storage | Up to 10,000 datasets (manual + auto logging) |
| Measurement Channels | 2 simultaneous digital IDS probe inputs |
| Communication | USB-B, optional wireless module (Bluetooth® Class 1, up to 10 m range) |
| Protection Rating | IP67 |
| Power Supply | 4 × AA alkaline or 4 × NiMH rechargeable batteries (1.2 V), or USB bus power |
| Compliance | CE-marked, designed per IEC 61000-6-2/-4 for electromagnetic immunity in field environments |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | SensoLyt 700IQ |
| Part Number | 109170 |
| Sensor Type | Intelligent In-Line pH/ORP Electrode with Integrated Preamp & NTC Temperature Sensor |
| Output Signal | 4–20 mA / RS-485 (Modbus RTU) |
| Housing Material | PVDF or Titanium (depending on variant) |
| Pressure Rating | Up to 10 bar (SensoLyt SEA-HP), 6 bar standard |
| Operating Temperature | −5 to +60 °C (standard), up to +80 °C (SEA-HP) |
| IP Rating | IP68 |
| Compliance | EN 61326-1 (EMC), EN 61000-6-2/-6-4, ATEX/IECEx Zone 1 optional |
| Lightning Protection | Integrated transient voltage suppression circuit |
| Brand | Global Water |
|---|---|
| Origin | Germany (Manufactured under Global Water USA specification) |
| Model | FP111, FP211, FP311 |
| Measurement Principle | Electromagnetic pulse generation via turbine–propeller sensor with positive displacement hydrodynamic sampling |
| Velocity Range | 0.1–6.1 m/s |
| Accuracy | ±0.03 m/s |
| Display | Backlit LCD with anti-glare & UV-stabilized coating |
| Data Storage | 30 sets of min/max/average values |
| Operating Temperature | –20 °C to +70 °C |
| Storage Temperature | –30 °C to +80 °C |
| Probe Material | PVC housing, anodized aluminum shaft, stainless steel water bearings |
| Handle Length (extendable) | FP111: 1.1–1.8 m |
| FP211 | 1.7–4.6 m |
| FP311 | 0.76–1.7 m |
| Weight | FP111: 0.9 kg |
| FP211 | 1.4 kg |
| FP311 | 1.3 kg |
| Power | Sealed lithium battery, ~5-year typical service life, non-replaceable |
| Certifications | CE compliant |
| Optional Accessories | Rotatable probe head (±90°), alignment vanes for directional correction |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | NH500/TC |
| Measurement Range (NH₄⁺) | 0.00–1280 mg/L |
| Measurement Range (NH₄–N) | 0.03–1000 mg/L |
| Compatible Analyzers | TresCon+ OA110, TresCon UNO A110 |
| Configuration | Complete electrode assembly including sensor body, three ammonia-selective membranes, and internal electrolyte solution |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Multi 9430 |
| Instrument Type | Laboratory Water Quality Analyzer |
| Measurement Principle | Electrochemical (pH, ORP, Conductivity, Optical Dissolved Oxygen) |
| Measured Parameters | pH, ORP, Conductivity, Dissolved Oxygen (optical), Temperature |
| Sensor Interface | Digital IDS (Intelligent Digital Sensors) |
| Channels | 3 independent digital sensor inputs |
| Data Storage | 10,000 measurement sets |
| Compliance | GLP/AQA-ready, FDA 21 CFR Part 11–compatible data handling |
| Connectivity | USB-A (host), Mini-USB-B (device), optional external printer support |
| Display | Backlit color graphic LCD |
| Keyboard | Antimicrobial-coated membrane keypad |
| Power Supply | Universal AC adapter |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | CR 3200 1P22-1 |
| Digestion Method | Rapid Digestion |
| Heating Modules | Dual Block Heater |
| Batch Capacity | 24 × 16 mm tubes |
| Temperature Range | 25–170 °C |
| Time Range | 0–180 min |
| Power Supply | 230 VAC 50 Hz ±15% / 115 VAC 60 Hz ±15% |
| Power Consumption | 560 W |
| Safety Class | I (DIN VDE 0700 Part 1:11/90) |
| Certifications | CE, cETLus, GS |
| Dimensions (W×H×D) | 256 × 185 × 315 mm |
| Weight | 3.6 kg |
| Interface | RS232 (unidirectional), 2 banana sockets (for TFK CR, AK CR/P or CR/PC sensors) |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Multi 3510 2FD353 |
| Instrument Type | Portable/HANDHELD Water Quality Analyzer |
| Detection Principle | Electrochemical Method |
| Measured Parameters | Dissolved Oxygen, pH, ORP, Conductivity, Turbidity |
| Repeatability | <1% |
| Display | LCD with Graphical Interface |
| Data Storage | Up to 10,000 Sets (Manual & Time-Controlled) |
| Connectivity | Micro-USB-B, Optional Wireless Module |
| Protection Rating | IP67 |
| Power Supply | 4 × AA Alkaline or 4 × 1.2 V NiMH Rechargeable Batteries / USB Bus Power |
| Probe Interface | Digital IDS (Intelligent Digital Sensor) Technology |
| Auto-Sensor Recognition | Yes |
| Calibration Data Storage | Embedded in IDS Probes |
| Electrical Isolation | Yes (Signal Integrity Preservation) |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Pro40 |
| Instrument Type | Laboratory Water Quality Analyzer |
| Measurement Principle | Electrochemical Sensing (pH, ORP, Conductivity, Dissolved Oxygen) + Optical Turbidimetry |
| Measurable Parameters | pH, ORP, mV, Conductivity, Dissolved Oxygen (DO), Turbidity, ISE (upcoming) |
| Channels | 4 Electrically Isolated Input Channels |
| Display | 7-inch High-Brightness Capacitive Touchscreen with Sanitary Glass Overlay |
| Sensor Interface | IDS Digital Smart Sensor Protocol |
| Wireless Capability | Compatible with IDS Wireless Module (optional) |
| Compliance | Designed for GxP environments |
| Data Export Formats | PDF/A, JSON, CSV |
| Operating Modes | Standard Mode & GxP Mode (with configurable trial period) |
| Environmental Rating | IP65-rated enclosure (front panel) |
| Certifications | CE, RoHS, ISO/IEC 17025–supportive calibration traceability |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Multi 3320 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measurement Principle | Electrochemical Sensing |
| Measurable Parameters | pH, ORP, Dissolved Oxygen (DO), Conductivity, Temperature |
| Compliance | GLP-compliant data logging |
| Memory Capacity | 5000 GLP-formatted records |
| Display | Backlit graphical LCD |
| Input Channels | Dual analog inputs (DIN 8-pin) |
| Protection Rating | IP67 |
| Power Supply | 4 × 1.5 V AA alkaline batteries (up to 1000 h operation) |
| Dimensions | 180 × 80 × 55 mm (H × L × W) |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | CR2200 1P21- |
| Digestion Method | Rapid Digestion |
| Heating Module | Single Heating Block |
| Batch Capacity | 12 × 16 mm Tubes |
| Temperature Range | Ambient to 170 °C |
| Fixed Programs | 5 pre-set (100 °C/60 min |
| Temperature Stability | ±0.5 K |
| Control Accuracy | ±1 °C |
| Overtemperature Protection | 190 °C ±5 °C |
| Heating Time | 25 °C → 100 °C in 5 min |
| Power Supply | 230 V AC / 50 Hz or 115 V AC / 60 Hz |
| Power Consumption | 280 W |
| Dimensions (W×D×H) | 292 × 245 × 180 mm |
| Weight | 2.9 kg |
| Safety Certifications | GS, CE, cETLus |
| Operating Temperature | +5 °C to +40 °C |
| Storage Temperature | −25 °C to +65 °C |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | C3/25 14541 |
| Certification | DIN 38409-41, EPA 410.4 compliant |
| Packaging | 25 vials per kit |
| COD Range | 25–1500 mg/L |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Multi 3510 IDS |
| Instrument Type | Portable / Handheld Water Quality Analyzer |
| Detection Principle | Electrochemical (for DO, pH, ORP, conductivity) & Optical (for turbidity) |
| Measured Parameters | Dissolved Oxygen (DO), pH, ORP, Conductivity, Turbidity |
| Repeatability | <1% |
| Display | Graphical LCD |
| Data Storage | Up to 10,000 datasets (manual + auto) |
| Interface | Micro-USB-B |
| Protection Rating | IP67 |
| Power Supply | 4 × AA alkaline or 4 × 1.2 V NiMH rechargeable batteries (USB charging supported) |
| Probe Communication | Digital IDS (Intelligent Digital Sensor) interface with automatic recognition and embedded calibration memory |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | FDO 700IQ |
| Part Number | 201650 |
| Measurement Principle | Green-light-based fluorescence quenching |
| Range (25°C) | 0–20.00 mg/L O₂, 0.0–200.0% saturation |
| Resolution | 0.01 mg/L O₂, 0.1% saturation |
| Accuracy | ±0.05 mg/L (<1 mg/L), ±0.1 mg/L (≥1 mg/L) |
| Repeatability | ±0.05 mg/L |
| Response Time (t₉₀) | <150 s |
| Temperature Range | –5°C to +60°C (sensor), –5°C to +50°C (compensation) |
| Pressure Rating | 10 bar (including cable) |
| Enclosure Rating | IP68 |
| Materials | POM/PVC/silicone membrane head, stainless steel body |
| Power Consumption | 0.7 W |
| Compliance | CE, cETLus, EN 61326 Class B, FCC Class A |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | inoLab Oxi 7310 |
| Instrument Type | Portable |
| Measurement Principle | Electrochemical (Polarographic) |
| Dissolved Oxygen Range | 0.00–19.99 mg/L |
| Accuracy | ±0.5% of reading |
| Data Storage Capacity | 5,000 automatic / 500 manual entries |
| Pressure Compensation | Automatic (500–1100 mbar) |
| Salinity Compensation | Manual (0–70.0 g/kg) |
| Temperature Range | 0.0–50.0 °C |
| Temperature Accuracy | ±0.1 °C |
| Interface | Mini-USB |
| Display | Backlit LCD with graphical capability |
| Power Supply | 4 × 1.5 V alkaline batteries, USB bus power, or universal AC adapter |
| Battery Life | Up to 800 h (no backlight), 100 h (continuous backlight) |
| Compliance | GLP/AQA-compliant data logging |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Multi 3630 IDS |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Detection Principle | Electrochemical Sensing (pH, ORP, Conductivity, DO) & Optical Turbidity Measurement (Nephelometry) |
| Measured Parameters | pH, ORP, Dissolved Oxygen (DO), Conductivity, Turbidity |
| Display | Color LCD with Graphical Interface |
| Data Storage | Up to 10,000 datasets (manual & time-controlled logging) |
| Communication | USB-B port, optional wireless module (Bluetooth-compatible IDS interface) |
| Protection Rating | IP67 |
| Power Supply | 4 × AA alkaline / 4 × NiMH rechargeable / USB bus power |
| Measurement Channels | 3 independent digital IDS channels |
| Compliance | CE-marked, designed for GLP-compliant field and laboratory use |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Multi 9620 IDS |
| Instrument Type | Benchtop Laboratory Multi-Parameter Analyzer |
| Measurement Principle | Electrochemical (pH, ORP, Conductivity, DO) + Optical (Turbidity) |
| Parameters | pH, ORP, Dissolved Oxygen (DO), Oxygen Saturation (%), Partial Pressure of Oxygen (pO₂), Conductivity, Resistivity, Salinity, TDS, Turbidity |
| Display | Graphical LCD with Backlight |
| Data Storage | 500 Manual / 10,000 Automatic Records |
| Measurement Channels | 2 Simultaneous |
| Probe Interface | Digital IDS (Intelligent Digital Sensor) Protocol |
| Connectivity | Micro-USB-B, USB-A (for USB flash drive or thermal printer), Optional Wireless Module (via Bluetooth-enabled IDS probes) |
| Compliance | CE, RoHS, ISO/IEC 17025-compatible operation |
| Power Supply | 4 × AA batteries (1.5 V) or USB-B bus power |
| Protection Class | IP43 |
| QSC (Quality Sensor Control) & CMC (Calibration Management Center) | Yes |
| Software Export Format | CSV and Excel-compatible (.xlsx) via USB storage |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | Oxi 3310 |
| Measurement Principle | Electrochemical Clark-type Polarographic Sensor |
| DO Range | 0.00–19.99 mg/L (±0.5% of reading), up to 90 mg/L |
| Saturation Range | 0.0–199.9% (±0.5%), up to 600% |
| Partial Pressure Range | 0–199.9 hPa / 0–1250 hPa (±0.5%) |
| Temperature Range | −5.0–105.0 °C (±0.1 °C) |
| Data Storage | 5000 automatic + 200 manual entries |
| IP Rating | IP66/IP67 |
| Battery Life | Up to 1000 h (150 h with backlight) |
| Interface | Waterproof USB |
| Calibration | Automatic OxiCal dry-air or saturated air method with electrode status feedback |
| Temperature Compensation | ATC (Automatic Temperature Compensation) |
| Compliance | Designed for GLP-compliant field and lab use |
| Brand | WTW |
|---|---|
| Origin | Germany |
| Model | 14558 |
| Format | Pre-filled Reagent Tubes |
| Compliance | DIN EN ISO 11732, EPA Method 350.1, DIN 38405-16 |
| Measurement Range (NH₄⁺-N) | 0.5–16.0 mg/L |
| Detection Principle | Indophenol Blue Spectrophotometry |
| Compatible Instruments | photoLab® 6100/6600/7100/7600, NOVA 30/60, Prove®, Move 100, photoFlex®, photoLab S6/S12 |
Show next