- All
- Favorite
- Popular
- Most rated
| Brand | ZEEDO |
|---|---|
| Origin | Zhejiang, China |
| Model | HS-566 |
| Tissue Processing Stages | 12 |
| Reagent Stations | 9 (1.2 L each) |
| Paraffin Stations | 3 (1.0 L each) |
| Temperature Control Range | 45–85 °C (±3 °C) |
| Max. Timer per Station | 999 min |
| Delay Start Time | 999 min |
| Vacuum Level | ≤0.053 MPa |
| Basket Agitation Frequency | 3 cycles/min |
| Basket Dimensions | Φ95 × 80 mm (single-tier & multi-tier) |
| Net Weight | ~60 kg |
| External Dimensions | 670 × 550 × 680 mm |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 500 W |
| Operating Ambient | 5–40 °C, <85% RH (at 20 ± 5 °C) |
| Capacity | Up to 300 tissue cassettes per run |
| Brand | ZEEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | HS-2000 |
| Price | USD 9,200 (FOB) |
| Solvent Chambers | 9 |
| Paraffin Chambers | 3 |
| Chamber Capacity | 2,000 mL (SX) / 2,500 mL (SD) |
| Processing Time Range | 1 min – 99 h per step |
| Temperature Control Range | Ambient – 99 °C |
| Protective Chamber Position | #7 (for safeguard solution) |
| Maximum Continuous Operation Duration | 1 year (programmable) |
| Dwell Time per Chamber | 1 min – 99 h |
| Paraffin Bath Temperature | Ambient – 99 °C (direct-heating silicone film heater) |
| Dual Overheat Protection | Yes |
| Power Supply | AC 220 V, 50 Hz |
| Power Consumption | 600 W |
| Net Weight | 80 kg |
| Dimensions (W × D × H) | 1050 × 530 × 350 mm |
| Carbon Filtration System | Integrated activated carbon filter |
| Control System | Microprocessor-based with 8 programmable protocols |
| Positioning Accuracy | Optical sensor + stepper motor drive with rail-guided carriage |
| Auto-Home & Error Compensation | Yes |
| Chamber Drain Delay | 30 s dwell at lift-off to minimize cross-contamination and reagent dilution |
| Agitation Mode | Dynamic fluid exchange during immersion to enhance dehydration kinetics |
| Brand | ZEEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HS-366 |
| Price | USD 9,200 (FOB) |
| Tissue Processing Stages | 12 |
| Solvent Stations | 9 × 1.2 L glass cylinders |
| Paraffin Stations | 3 × 1.0 L heated wax baths |
| Temperature Control Range | 45–85 °C (±3 °C) |
| Stage Time Setting | 0–59 h 59 min per station |
| Delay Start | 0–59 h 59 min |
| Basket Agitation Frequency | 3 cycles/min |
| Basket Dimensions | Φ95 × 80 mm (single-tier) or 5-layer stackable |
| Net Weight | ~60 kg |
| External Dimensions | 660 × 550 × 680 mm |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 500 W |
| Operating Environment | +5 to +40 °C ambient temperature |
| Display Language | Switchable Chinese/English LCD interface |
| Pre-stored Protocols | 10 user-programmable methods |
| Minimum Time Resolution | 1 minute |
| Wax Bath Temperature Stability | ±0.5 °C under load |
| Interior Surface Coating | PTFE (Teflon®) anti-adhesive and corrosion-resistant finish |
| Safety Features | Power-failure alarm with auto-suspension to designated solvent station, mechanical obstruction detection, emergency stop, over-temperature cutoff |
Show next