Coating Machine
Filter
Showing 31–60 of 132 results
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-AFA-EC200 |
| Price | Upon Request |
| Input Voltage | AC 220 V, 50 Hz |
| Max. Power Consumption | ~3 kW |
| Substrate Width | ≤200 mm |
| Coating Width | ≤180 mm |
| Coating Speed | 200 mm/min (adjustable) |
| Coating Thickness Range | 20–200 µm (dry film basis) |
| Coating Accuracy | ±6 µm (±8 µm at edges) |
| Tension Control | Automatic unwind/rewind tension regulation |
| Rewind/Unwind Core Diameter | Max. Φ200 mm |
| Core Type | 3-inch mandrel with T-slot or air-expanding shaft |
| Edge Guiding Accuracy | ±0.5 mm |
| Drying Temperature Range | Up to 150 °C ±5 °C |
| Oven Length | 500 mm |
| Drying Method | Resistive heating with dual-zone forced-air convection (top & bottom) |
| Overall Dimensions | 1000 × 650 × 650 mm (L×W×H) |
| Operating Environment | Altitude <1000 m |
| Required Utilities | Grounded AC 220 V supply |
| Footprint Clearance | 800 × 600 × 700 mm workbench (≥200 kg load capacity) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-AFA-EC300 |
| Price | Upon Request |
| Input Voltage | AC 220 V, 50 Hz |
| Max Power Consumption | ~5 kW |
| Compressed Air Supply | 0.5–0.8 MPa |
| Substrate Width | up to 280 mm |
| Coating Width | up to 260 mm |
| Coating Speed | 100–600 mm/min |
| Coating Thickness Accuracy | ±3 µm (edge deviation ±5 µm) |
| Coating Roll Diameter | Ø100 mm |
| Roll Runout | ≤2 µm |
| Unwind/Reel Max Diameter | 250 mm |
| Web Tension Range | 5–40 N (adjustable) |
| Doctor Blade Positioning Resolution | ±1 µm (micrometer indicator) |
| Edge Guiding Accuracy | ±0.5 mm |
| Drying Temperature Range | up to 150 °C ±5 °C |
| Oven Length | 800 mm |
| Heating Method | Resistive heating with dual-zone forced-air convection |
| Overall Dimensions | 1530 × 950 × 1080 mm (L×W×H) |
| Net Weight | 1000 kg |
| Operating Altitude | ≤1000 m |
| Ambient Temp | 25 °C ±15 °C |
| Relative Humidity | 55 %RH ±10 %RH |
| Required Utilities | Grounded AC power only |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-AFA-EI300 |
| Power Supply | AC 220 V, 50 Hz |
| Max. Power Consumption | ~5 kW |
| Air Supply | 0.5–0.8 MPa compressed air |
| Substrate Width | ≤280 mm |
| Coating Width | ≤260 mm |
| Coating Speed | 100–600 mm/min |
| Coating Accuracy | ±3 µm (edge error ±5 µm) |
| Coating Roll Diameter | Ø100 mm |
| Roll Runout | ≤2 µm |
| Unwind/rewind Max. Roll Diameter | 250 mm |
| Tension Range | 5–40 N (adjustable) |
| Doctor Blade Positioning Resolution | ±1 µm (dial indicator) |
| Edge Guiding Accuracy | ±0.5 mm |
| Drying Temperature Range | up to 150 °C ±5 °C |
| Oven Length | 800 mm |
| Heating Method | Resistive heating with dual-side forced-air convection |
| Overall Dimensions | 1530 × 950 × 1080 mm |
| Net Weight | 1000 kg |
| Operating Altitude | ≤1000 m |
| Ambient Temp. | 25 °C ±15 °C |
| Relative Humidity | 55 %RH ±10 %RH |
| Required Utilities | Grounded AC power only |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | MSK-AFA-EI400 |
| Power Supply | 3-phase AC 380 V, 50 Hz |
| Rated Power | 30 kW |
| Compressed Air Requirement | 0.5–0.8 MPa |
| Effective Coating Width | 350 mm |
| Coating Roll Width | 400 mm |
| Max Mechanical Speed | 5 m/min |
| Coating Speed | 3 m/min |
| Dry Film Thickness Tolerance | ±2.5 µm (edge ±5 µm) |
| Single-Coating Length | 5000 mm |
| Edge Margin Range | 10–100 mm |
| Rewind Positioning Accuracy | ±0.5 mm |
| Max Drying Temperature | 150 ℃ ±3 ℃ |
| Oven Section Length | 1.5 m × 3 = 4.5 m |
| Drying Method | Forced-air convection (electric heating) |
| Tension Control Range | ≤60 N |
| Core Diameter | 3" air-expanding shaft |
| Adjustable Coating Thickness | 30–1000 µm |
| Coating Roll Diameter | Ø120 mm, steel |
| Roll Runout | ≤3 µm |
| Doctor Blade Positioning Resolution | ±1 µm (micrometer dial indicator) |
| Edge Guiding Accuracy | ±0.5 mm |
| Overall Dimensions | 6500 mm × 1200 mm × 1600 mm |
| Floor Space Requirement | 7500 mm × 1500 mm |
| Operating Environment | Altitude <1000 m, Ambient Temp. 25 ℃ ±15 ℃, RH 55% ±10% |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | MSK-AFA-I |
| Coating Width | 150 mm (adjustable via KTQ150 doctor blade) |
| Coating Thickness Range | 0–3500 µm (micrometer-adjustable gap) |
| Coating Length | 10–290 mm (programmable stroke) |
| Coating Speed | 10–100 mm/s (infinitely variable, digital display) |
| Vacuum Adsorption Area | 300 mm × 150 mm |
| Base Plate Dimensions | 360 mm × 200 mm |
| Overall Dimensions | 610 mm × 390 mm × 240 mm |
| Weight | 25 kg |
| Power Supply | DC 24 V / 3.75 A (via included AC/DC adapter: IN AC 100–240 V, 50/60 Hz |
| Max. Power Consumption | ≤50 W |
| Environmental Operating Range | 0–45 °C, 10–85 % RH (non-condensing) |
| Vacuum Requirement | External oil-free vacuum pump (e.g., AP-1400V, optional) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-AFA-II-VC |
| Price | Upon Request |
| Power Supply | AC 220 V, 50 Hz |
| Total Power Consumption | 50 W |
| Coating Speed | 10–100 mm/s |
| Coating Stroke | 10–530 mm |
| Vacuum Platen Dimensions | 600 × 300 mm (L × W) |
| Effective Vacuum Area | 600 × 250 mm (L × W) |
| Adjustable Doctor Blade Range | 0.01–5 mm (250 mm micro-adjustable blade included) |
| Film Thickness Accuracy | ±0.01 mm |
| Overall Dimensions | 850 × 430 × 223 mm (L × W × H) |
| Net Weight | 45 kg |
| Operating Altitude | ≤1000 m |
| Ambient Temperature | 25 °C ±15 °C |
| Relative Humidity | 55 %RH ±10 %RH |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | MSK-AFA-III |
| Power Supply | AC 220 V, 50 Hz |
| Total Power | 1100 W |
| Coating Speed | 10–100 mm/s (adjustable) |
| Coating Stroke | 10–250 mm (adjustable) |
| Vacuum Platen Dimensions | 360 × 200 mm |
| Effective Vacuum Area | 300 × 150 mm |
| Max Heating Temperature | 120 °C |
| Temperature Control Accuracy | ±2 °C |
| Adjustable Doctor Blade | 150 mm, micrometer-adjustable (0.01–5 mm range) |
| Film Thickness Repeatability | ±0.01 mm |
| Overall Dimensions (Closed) | 600 × 400 × 380 mm |
| Weight | 50 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | MSK-AFA-IIID-G |
| Pricing | Upon Request |
| Power Supply | AC 220 V, 50 Hz (dual-circuit), 10 A per circuit |
| Total Power | 2050 W |
| Coating Base Dimensions (L×W) | 360 mm × 200 mm |
| Vacuum Adsorption Area (L×W) | 300 mm × 150 mm |
| Coating Speed | 10–100 mm/s (infinitely variable) |
| Adjustable Coating Length | 0–300 mm |
| Adjustable Doctor Blade | KTQ150 type, 150 mm wide, thickness range 0–3500 µm |
| Heating Method | Independent top cover + bottom vacuum platen heating |
| Max. Heating Temperature | 200 °C (top and bottom, separately controlled) |
| Temperature Control Accuracy | ±2 °C |
| Operating Ambient | 0–45 °C, 10–85% RH (non-condensing) |
| Dimensions (closed lid) | 610 mm × 390 mm × 340 mm |
| Dimensions (open lid) | 800 mm × 390 mm × 780 mm |
| Net Weight | 60 kg |
| Vacuum Requirement | External oil-free vacuum pump (e.g., AP-1400V, optional) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | MSK-AFA-IV |
| Power Supply | AC 220 V, 50 Hz |
| Total Power Consumption | 48 W |
| Coating Speed Range | 0–1200 mm/min (adjustable via rotary knob with digital display) |
| Coating Accuracy | ±1 µm |
| Maximum Coating Area | 300 mm × 420 mm |
| Roller Dimensions | Ø12 mm × 400 mm |
| Adjustable Film Thickness Range | 12–200 µm (dependent on selected precision coating rod) |
| Optional Adjustable Thickness Doctor Blade | 5–200 µm (1 µm resolution) |
| Operating Environment | Altitude <1000 m |
| Footprint | 710 mm (L) × 420 mm (W) × 300 mm (H) |
| Net Weight | 20 kg |
| Electrical Requirement | Grounded AC 220 V, 50 Hz only |
| Mechanical Safety | Dual-end limit switches for automatic stop |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer | KJ GROUP |
| Model | MSK-AFA-IVDV |
| Power Supply | 220 V, 50 Hz |
| Standby Power | 48 W |
| Heating Power | 2000 W |
| Coating Uniformity | ±5% |
| Effective Coating Area | 300 × 450 mm (vacuum-secured substrate) |
| Wet Film Thickness Range | 5 µm – 5 mm (dependent on fluid rheology and substrate wettability) |
| Doctor Blade Material | Alloy Steel (optional heated blade: RT–180 °C) |
| Coating Speed | 1–10 m/min (digitally displayed) |
| Heating Plate Temperature Range | Ambient to 200 °C |
| Dimensions (L×W×H) | 680 × 480 × 380 mm |
| Weight | 38 kg |
| Optional Accessories | Precision Adjustable Film Applicators (5–200 µm, 1 µm resolution), Fixed-Thickness Metering Rollers (5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120, 150, 200 µm) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-AFA-L800 |
| Pricing | Available Upon Request |
| Power Supply | AC 110/220 V, 50/60 Hz |
| Total Power Consumption | 150 W |
| Coating Speed | 10–100 mm/s (adjustable) |
| Coating Stroke | 10–800 mm |
| Vacuum Platen Dimensions | 800 × 260 mm |
| Effective Vacuum Area | 740 × 218 mm |
| Micrometer-Adjustable Doctor Blade | 180 mm length, 0.01–5 mm gap range |
| Film Thickness Accuracy | ±0.01 mm |
| Footprint | 960 × 370 × 240 mm |
| Weight | 50 kg |
| Operating Environment | Altitude < 1000 m, Temperature 10–40 °C, Relative Humidity 45–65 % RH |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | MSK-NFES-3C |
| Power Supply | 220 V, 50 Hz, 1100 W |
| High-Voltage Output | 0–30 kV |
| Temperature Control Range | RT to 50 °C |
| Syringe Pump Flow Rate | 0.0001–1 mm/s |
| Max Syringe Diameter | Ø30 mm |
| Standard Syringe Volume | 20 mL |
| Plunger Stroke Range | 0.01–90 mm |
| Collector Drum Speed | 400–3800 rpm (100 rpm increments) |
| Oscillation Speed | 5–100 mm/s (5 mm/s increments) |
| Oscillation Range | 100–200 mm |
| Drum Dimensions | Ø80 × 200 mm |
| Optional Collector Platform | Manual X/Y (1–10 mm/s), Auto X/Y (1–20 mm/s / 1–10 mm/s), Max Sample Size: 180 × 180 mm, Layer Spacing: 0.1–100 mm |
| Overall Dimensions | 700 × 600 × 900 mm (L×W×H) |
| Total Mass | 75 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Manufacturer |
| Model | MSK-NFES-3C-DZ01 |
| Input Voltage | 220 V AC, 50 Hz |
| Positive High Voltage Output | +30 kV |
| Negative High Voltage Output | −30 kV |
| Heating Range | RT to 50 °C (Infrared Lamp, 1600 W) |
| Dehumidification Capacity | 420 W (Humidity Control Range: 10–60 %RH) |
| Total System Power | 5194 W (Conjugate Collector: 3352 W |
| Drum Collector | 1842 W) |
| Syringe Pump Feed Rate | 0.001–20 mm/min |
| Syringe Volume Compatibility | 10–50 mL (Standard: 20 mL) |
| Syringe Plunger Stroke Range | 0.01–90 mm |
| Drum Collector Speed | 500–3800 rpm (Increment: 100 rpm) |
| Drum Oscillation Speed | 5–100 mm/s (Increment: 5 mm/s) |
| Oscillation Amplitude | 100–200 mm |
| Drum Dimensions | Ø80 × 200 mm |
| Conjugate Collector Needle-to-Collector Distance | 20–60 cm |
| Conjugate Axis Rotation Speed | 500–3000 rpm |
| Rod Collector Speed | 1–500 rpm |
| Vertical Travel Range (Conjugate Stage) | 180 mm (Speed: 0.1–5 mm/s) |
| Overall Dimensions | 1100 × 1100 × 1200 mm |
| Net Weight | 100 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | China |
| Manufacturer Type | Authorized Distributor |
| Equipment Category | Imported Lab Equipment |
| Model | MSK-NFES-4 |
| Power Input | AC 208–240 V, 50 Hz |
| High-Voltage Output | 0–30 kV, max. 0.5 mA |
| Temperature Control Range | Ambient to 60 °C |
| Rotational Speed Range (Drum Collector) | 300–4000 rpm, stability ±1% |
| Collector Options | 6-diameter drum (Ø2–100 mm), fixed stainless steel plate (320 × 100 × 2 mm), programmable XY-stage (300 × 200 × 5 mm) |
| Syringe Capacity | 2.5–60 mL (glass only) |
| Enclosure Dimensions | 1200 × 800 × 1900 mm (W × D × H) |
| Total Weight | 590 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SP-04-LD |
| Pricing | Upon Request |
| Input Power | 208–240 V AC, 50/60 Hz |
| Stepper Motor Supply | 24 V DC |
| Ultrasonic Nebulizer | 40 kHz, 130 W |
| Reservoir Volumes | 50 mL & 250 mL |
| Flow Rate | 1–20 mL/s |
| Droplet Size | ~50 µm |
| X-Y Translation Range | 200 mm (X), 200 mm (Y) |
| Translation Speed | X-axis 10–800 mm/s, Y-axis 1–12 mm/s |
| Substrate Stage | 150 mm × 150 mm |
| Max Substrate Temperature | 500 °C |
| Temperature Control | Digital PID controller with 7-segment ramp-soak program |
| Dimensions (W×D×H) | 840 × 920 × 1400 mm |
| Operating Altitude | ≤1000 m |
| Ambient Temp. | 25 °C ±15 °C |
| Relative Humidity | 55 %RH ±10 %RH |
| Grounding | Mandatory |
| Ventilation | Required |
| Footprint | ≥1 m² |
| Compressed Air | Required for Y-axis actuation |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-TH-04FA |
| Price | Upon Request |
| Input Power | AC 208–240 V, Single Phase |
| Syringe Pump Flow Rate | 1–10 mL/min |
| Syringe Capacity | 50 mL or 250 mL |
| Substrate Heater Plate | 150 mm × 150 mm, Max 500 °C |
| XY Stage Travel | X: 100 mm, Y: 100 mm |
| XY Speed | X: 5–20 mm/s, Y: 2–12 mm/s |
| Nozzle | Compressed Air Atomizer |
| Integrated Air Compressor | Yes |
| Control Interface | RS232 (Heater), USB/Serial (Pump & Stage) |
| CE Certified | Yes |
| Software | Pre-installed on Included Laptop |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-USP-04C |
| Price | Upon Request |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power | 100 W |
| X/Y Travel Range | 1–200 mm |
| X-Axis Speed | 10–800 mm/s |
| Y-Axis Speed | 10–100 mm/s |
| Droplet Size | 10–20 µm |
| Flow Rate | 0.6 pL/min – 4 mL/min |
| Max Substrate Temperature | 500 °C |
| Heater Platform Dimensions | 350 mm × 220 mm |
| Z-Axis Adjustment Range | 0–60 mm |
| Syringe Capacity | 20 mL |
| Syringe Diameter Limit | ≤ Ø30 mm |
| Syringe Drive Speed | 0.1–45 mm/min (fine adjustment: 0.01–8 mm/min) |
| Syringe Stroke Range | 0.001–120 mm |
| Max Solid Content | ≤ 10 wt% |
| Max Viscosity | ≤ 100 cP |
| Nozzle-to-Substrate Distance | 1–100 mm |
| Footprint | ≥ 2 m² |
| Operating Altitude | ≤ 1000 m |
| Ambient Temp | 25 °C ± 15 °C |
| Relative Humidity | 55 %RH ± 10 %RH |
| Power Supply | AC 220 V, 50/60 Hz, Grounded |
| Pneumatic Requirement | Compressed Air or Gas Cylinder with Regulator |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-USP-04C |
| Power Supply | AC 220 V, 50/60 Hz |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power | 100 W |
| X/Y Travel Range | 1–200 mm |
| X-Axis Speed | 10–800 mm/s |
| Y-Axis Speed | 10–100 mm/s |
| Droplet Size | 10–20 µm |
| Flow Rate | 0.6 nL/min–4 mL/min |
| Max Substrate Temperature | 500 °C |
| Hotplate Dimensions | 350 mm × 220 mm |
| Z-Axis Adjustment Range | 0–60 mm |
| Syringe Capacity | 20 mL |
| Syringe Diameter Limit | ≤ Ø30 mm |
| Syringe Drive Speed | 0.1–45 mm/min (fine adjustment: 0.01–8 mm/min) |
| Syringe Stroke Range | 0.001–120 mm |
| Coating Gap (Nozzle-to-Substrate) | 1–100 mm |
| Max. Solid Content | ≤ 10 wt% |
| Max. Solution Viscosity | ≤ 100 cP |
| Footprint | 1550 mm × 750 mm × 750 mm (main unit) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-6P |
| Pricing | Upon Request |
| Certification | CE Certified |
| Power Supply | AC 220 V, 50 Hz, 100 W |
| Operating Environment | Altitude < 1000 m, Temperature 10–40 °C, Relative Humidity 45–65 % RH |
| Dimensions (W×D×H) | 260 × 340 × 420 mm |
| Weight | 15 kg |
| Sample Holder Dimensions | 75 × 25 × 2 mm |
| Immersion Length | 60 mm |
| Travel Stroke | 1–80 mm |
| Dip Speed (Auto) | 1–400 mm/min |
| Dip Speed (Manual) | 1–150 mm/min |
| Immersion/Drying Time Range | 1–999 s |
| Dip Cycles | 1–45 |
| Stirring | Independent on/off control per station, dual-speed (low/high) |
| Dip Vessel Capacity | 150 mL × 6 |
| Footprint Requirement | ≥ 500 × 800 mm, Load Capacity ≥ 50 kg |
| Grounding | Mandatory |
| Ventilation | Not required |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-HT |
| Heating Temperature Range | RT–1000 °C (furnace), RT–800 °C (standard operation with included dip rods) |
| Max. Pulling Speed | 200 mm/min |
| Min. Pulling Speed | 1 mm/min |
| Immersion & Drying Time Setting | 1–999 s |
| Effective Immersion Length | 60 mm |
| Sample Load Capacity | ≤1 kg |
| Furnace Tube Dimensions | Φ50 × 610 mm (ID: Φ45 mm) |
| 炉膛尺寸 | Φ80 × 330 mm |
| Temperature Control Accuracy | ±1 °C |
| Power Supply | AC 220 V, 50 Hz, 50 A |
| Total Power Consumption | 1.6 kW |
| Ambient Operating Conditions | Altitude <1000 m |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM01 |
| Price | Upon Request |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 50 W |
| Withdrawal Speed Range | 1–200 mm/min |
| Effective Immersion Length | 60 mm |
| Immersion & Drying Time Setting | 1–999 s |
| Programmable Coating Cycles | 1–20 |
| Sample Dimensions (Standard) | 75 mm × 25 mm × 2.5 mm |
| Unit Dimensions | 320 mm × 260 mm × 560 mm |
| Net Weight | 18 kg |
| Operating Altitude | ≤1000 m |
| Ambient Temperature Range | 25 °C ±15 °C |
| Relative Humidity | 55 %RH ±10 %RH |
| Motor Type | High-Precision Stepper Motor |
| Vibration Mitigation | Suspended Motor Mounting |
| Optional Accessories | Rapid-Release Sample Clamp, Additional Withdrawal Wires |
| Standard Accessories | Anti-Oscillation Guide Base, Sample Holder Set, Coating Beaker (1 pc), Withdrawal Wires (3 pcs) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM02 |
| Price | Upon Request |
| Touchscreen Interface | 7-inch Color TFT LCD |
| CE Certified | Yes |
| Control System | Industrial PLC |
| Drive Motor | High-Precision Stepper Motor with Suspended Mounting for Vibration Damping |
| Power Supply | AC 220 V, 50 Hz, Grounded |
| Rated Power | 50 W |
| Operating Environment | Altitude < 1000 m |
| Dimensions (W×D×H) | 320 × 260 × 560 mm |
| Net Weight | 17 kg |
| Sample Holder Dimensions | 75 × 25 × 2.5 mm |
| Immersion Length | 60 mm |
| Withdrawal Speed Range | 1–200 mm/min (adjustable in 0.1 mm/min increments) |
| Immersion/Drying Time Range | 1–999 s (programmable per cycle) |
| Number of Cycles | 1–20 (fully programmable sequence) |
| Standard Accessories | (1) Sample Clamp Set, (2) Coating Beaker (100 mL), (3) Three Stainless-Steel Withdrawal Wires |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM02-200 |
| Power Supply | AC 220 V, 50 Hz |
| Speed Range | 1–200 mm/min |
| Stroke | 270 mm |
| Max Sample Dimensions | 310 × 260 × 5 mm |
| Load Capacity | ≤5.5 kg |
| Immersion/Drying Time Setting | 1–999 s |
| Cycle Count | 1–20 cycles |
| Motor | Two-phase hybrid stepper motor with microstepping driver |
| Certifications | CE compliant |
| Footprint | 455 × 330 × 890 mm (L×W×H) |
| Working Table Requirement | ≥800 × 600 × 700 mm, ≥200 kg load capacity |
| Environmental Operating Range | Altitude <1000 m, Temperature 10–40 °C, Relative Humidity 45–65 % RH |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM02-8P |
| Power Supply | AC 220 V, 50 Hz |
| X-axis Speed Range | 500–5000 mm/min |
| Z-axis Speed Range | 1–200 mm/min |
| Effective Immersion Length | 65 mm |
| Sample Dimensions (per substrate) | 75 × 25 × 2.5 mm |
| Max Simultaneous Substrates | 5 |
| Substrate Positions per Batch | 8 |
| Immersion & Drying Time Range | 1–999 s |
| Cycle Count Range | 1–999 |
| Operating Ambient | ≤1000 m altitude, 10–40 °C, 45–65 %RH |
| Footprint | 900 × 520 × 540 mm |
| Weight | 20 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MMB01 |
| Pricing | Upon Request |
| Power Supply | AC 220 V, 50 Hz, 850 W |
| Lifting Speed Range | 1–200 mm/min |
| Temperature Control Range | RT + 5 °C to 100 °C |
| Temperature Stability | ±1.5 °C |
| Effective Immersion Length | 60 mm |
| Immersion & Drying Time Setting | 1–999 s |
| Programmable Dip Cycles | 1–20 |
| Sample Dimensions Supported | 75 mm × 25 mm × 2.5 mm |
| Footprint | 450 mm × 500 mm × 970 mm |
| Dry Box External Dimensions | 460 mm × 510 mm × 695 mm |
| Working Table Requirement | ≥800 mm × 600 mm × 700 mm, Load Capacity ≥200 kg |
| Environmental Operating Conditions | Altitude ≤1000 m, Ambient Temperature 25 °C ±15 °C, Relative Humidity 55 %RH ±10 %RH |
| Motor Type | High-Precision Stepper Motor with Suspended Mounting for Vibration Damping |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MMB02 |
| Pricing | Upon Request |
| Dip Speed | 1–200 mm/min |
| Temperature Range (Coating Chamber) | RT to 100 °C |
| Temperature Stability | ±1.5 °C |
| Effective Immersion Length | 60 mm |
| Immersion/Drying Time Setting | 1–999 s |
| Cycle Count | 1–20 cycles |
| Sample Dimensions | 75 mm × 25 mm × 2.5 mm |
| 恒温箱尺寸 | 460 mm × 510 mm × 695 mm |
| Overall Unit Dimensions | 450 mm × 500 mm × 970 mm |
| Power Supply | AC 220 V, 50 Hz, Grounded |
| Ambient Operating Conditions | Altitude ≤1000 m, Ambient Temp. 25 °C ±15 °C, RH 55% ±10% |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MMB02-200 |
| Price | Upon Request |
| Power Supply | 220 V, 50 Hz |
| Heating Power | 2.3 kW |
| Withdrawal Speed Range | 1–200 mm/min |
| Stroke Length | 250 mm |
| Temperature Range | 80–200 °C |
| Temperature Accuracy | ±1.5 °C |
| Fuse Rating | 15 A |
| Sample Dimensions | 407 mm × 229 mm × (1–10) mm |
| Maximum Load Capacity | ≤5 kg |
| Overall Dimensions | 636 mm × 680 mm × 1520 mm |
| Standard Accessories | 1 control unit, 1 immersion bath |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-NMB |
| Price | Upon Request |
| Power Supply | AC 220 V, 50 Hz, 850 W |
| Dip Speed Range | 1–500 nm/s |
| Effective Immersion Length | 60 mm |
| Immersion/Drying Time Setting | 1–999 s |
| Cycles per Run | 1–20 |
| Temperature Control Range (Chamber) | RT+5°C to 100°C |
| Temperature Stability | ±1.5°C |
| Sample Holder Dimensions | 75 × 25 × 2.5 mm |
| Chamber External Dimensions | 460 × 510 × 695 mm |
| Overall Instrument Dimensions | 450 × 500 × 970 mm |
| Weight Capacity of Workbench | ≥200 kg |
| Required Bench Footprint | 800 × 600 × 700 mm |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | PTL-OV5P |
| Power Supply | AC 220 V, 50 Hz, 3 A, 850 W |
| Pulling Speed Range | 1–200 mm/min |
| Temperature Control Range (Chamber) | RT+5°C to 100°C |
| Temperature Uniformity | ±1.5°C |
| Sample Dimensions | 75 mm × 25 mm × 2.5 mm |
| Immersion Length | 60 mm |
| Vial Capacity | Φ60 mm, 150 mL |
| Dwell Time per Station | 1–999 s |
| Coating Cycles per Station | 1–20 |
| Number of Stations | 5 |
| Chamber Dimensions | 460 mm × 510 mm × 695 mm |
| Overall Dimensions | 450 mm × 500 mm × 1060 mm |
| Weight | 45 kg |
| Compliance | CE-certified |
| Operating Environment | 5–40°C, ≤85% RH, altitude <1000 m, no strong vibration or corrosive gases |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-OV6P |
| Pricing | Upon Request |
| Certifications | CE Certified |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 800 W |
| Withdrawal Speed Range | 1–200 mm/min |
| Temperature Control Range (Chamber) | RT + 5 °C to 100 °C |
| Temperature Uniformity | ±1.5 °C |
| Sample Dimensions (Max) | 75 mm × 25 mm × 2.5 mm |
| Immersion Length | 60 mm |
| Immersion & Drying Time Setting Range | 1–999 s |
| Number of Coating Cycles | 1–20 |
| Sample Capacity | 6 positions |
| Vial Specifications | Φ60 mm, 150 mL |
| Chamber External Dimensions | 460 mm × 510 mm × 695 mm |
| System Dimensions | 450 mm × 500 mm × 1060 mm |
| Net Weight | 40 kg |
| Required Workbench | 800 mm × 600 mm × 700 mm, ≥200 kg load capacity |
| Operating Environment | Altitude <1000 m, Ambient Temp. 25 °C ±15 °C, RH 55 % ±10 % |
| Grounding | Mandatory |
| Compressed Air / Water / Ventilation | Not Required |