- All
- Favorite
- Popular
- Most rated
| Brand | Sartorius |
|---|---|
| Origin | Imported (Non-China) |
| Model | BPE (Single-Channel) / M-BPE (Multi-Channel) |
| Type | Motorized Electronic Pipette |
| Compliance | ISO 8655-1:2022, ISO 8655-6:2022, GLP/GMP-ready architecture |
| Power | Rechargeable Li-ion battery with docking station |
| Ergonomics | WRULDs-reducing design per ISO 10075-3 |
| Filtration | Integrated conical aerosol barrier filters (5 included per unit) |
| Calibration | User-calibratable via built-in calibration mode |
| Software Interface | Optional PC connectivity for audit trail (21 CFR Part 11 compliant firmware available) |
| Brand | Sartorius |
|---|---|
| Origin | Finland (Manufactured) |
| Model | eLine |
| Type | Motorized Single-Channel Electronic Pipette |
| Power | Rechargeable Lithium-Ion Battery |
| Display | Backlit LCD with Icon-Based Interface |
| Pipetting Modes | 11 Predefined (e.g., Standard, Reverse, Dilution, Dispense, Repeat, Mix, Variable Volume, Stepwise, Programmed Aspirate/Dispense, Calibration Mode, Error Log Review) |
| User Programs | Up to 6 Custom Protocols with Audit Trail |
| Tip Ejection | Motorized, One-Touch Electronic Eject |
| Charging Options | Dedicated eLine Charging Station (Docking Cradle) or Optional AC Adapter (Fast Charge Support) |
| Ergonomics | Ambidextrous Design with Adjustable Grip Angle and Low Actuation Force |
| Compliance | ISO 8655-2:2022 (Pipettes), ISO 13485:2016 (QMS), CE Marked for IVDD & MDR |
| Brand | Sartorius |
|---|---|
| Origin | Imported (Germany) |
| Model | Proline |
| Capacity Range | 0.01–50 mL |
| Sterilization | Autoclavable (121 °C, 20 min) |
| Chemical Resistance | High (PTFE, FEP, PEEK, borosilicate glass) |
| Dispensing Accuracy | ±0.5% (v/v) |
| Repeatability | ≤0.2% CV |
| Valve Type | Leak-proof safety valve with positive shut-off |
| Dispensing Head | 360° rotatable |
| Tube Options | Standard dispensing tip or optional extension tube |
| Cleaning | Fully disassemblable |
| Thread Adapters | Includes universal adapter set (GL32, GL38, GL45, GL50, GL55, GL60, GL70, GL80) |
| Brand | FSI (Flow Sciences, Inc.) |
|---|---|
| Origin | USA |
| Model | ETA-AAC |
| Airflow Velocity Range | 0.3–0.5 m/s (adjustable) |
| Sound Pressure Level | <60 dBA at 0.4 m/s |
| Filtration | Dual-stage HEPA (H14, EN 1822), BIBO lower filter |
| Filter Lifetime | ≥3 years under typical use |
| Inlet Configuration | Four-sided (top/bottom/left/right) aerodynamic arc-shaped baffles |
| Internal Flow Control | Rear laminar flow baffle + removable non-screw ceiling panel |
| Safety Compliance | OEB 3–5 validated per ISO 14644-1 Class 5 background |
| Alarm System | Thermal-anemometer-based face velocity monitor with audible/visual alert at <0.3 m/s |
| Accessories | Integrated waste bagging system, pass-through port interface, chemical-resistant phenolic resin work surface base |
| Brand | INNOTEG |
|---|---|
| Model | NT Manual Kit |
| Construction | Stainless Steel (dynamic trap needle), Borosilicate Glass + Stainless Steel Plunger (syringe), PTFE (manual sampling pump) |
| Adsorbent Options | Tenax TA, PDMS, DVB, Carbopack X, Carboxen 1000, Carboxen 1016 |
| Sampling Volume | 10 mL / 50 mL / 100 mL (selectable fixed volumes) |
| Trap Dimensions | 60 mm length, OD/ID = 700 µm / 400 µm |
| Reusability | ≥100 cycles after thermal conditioning |
| Detection Range | ppb–ppt level VOCs |
| Direct GC/GC–MS Compatibility | Yes, thermal desorption in standard split/splitless inlet, <60 s desorption time |
| Sealable Transport | Dual PTFE caps included |
| Custom Fillings | Available for fatty acids, alcohols, aldehydes, esters, ketones |
| Compliance | Designed for ASTM D6196, ISO 16017-1, USP <467>, and EPA TO-17 workflows |
| Brand | INNOTEG |
|---|---|
| Model | TB2101 |
| Origin | Guangdong, China |
| Instrument Type | Manual Sorbent Tube Spiking System |
| Tube Compatibility | 3.5" × 1/4" (89 mm × 6.35 mm) Standard Thermal Desorption Tubes |
| Syringe Mounting | Vertical Fixed-Position Needle Holder with Depth-Limited Penetration |
| Solvent & Standard Vial Positions | Integrated Liquid Standard Tray with Dedicated Solvent Bottle Holder |
| Purge Gas Flow Control | Adjustable Mass Flow Regulator (0–500 mL/min typical range) |
| Footprint | Compact Benchtop Design (W × D × H ≈ 280 × 220 × 180 mm) |
| Compliance | Designed for GLP-aligned laboratory workflows |
| Brand | Sartorius |
|---|---|
| Model | Midi Plus |
| Power | Rechargeable Li-ion battery (AC/DC compatible) |
| Weight | <120 g |
| Compatible Pipettes | 1–100 mL glass and plastic serological pipettes |
| Adapter Included | Proline 5 mL & 10 mL tip adapters |
| Control Method | Pressure-sensitive ergonomic button |
| Low-Battery Indicator | Yes |
| Stand Included | Yes |
| Optional Accessory | Wall-mounted holder |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | NT Needle Trap |
| Pricing | Upon Request |
| Connector | Luer-Lock |
| Length | 50–70 mm |
| Inner Diameter Options | 0.4 mm (23G), 0.4 mm / 0.72 mm (22G), 0.35 mm / 0.64 mm (23G) |
| Tip Geometry | Conical with side port, blunt tip, or custom-configurable |
| Packing Material | User-selectable solid-phase sorbents (e.g., Tenax TA, Carbopack X, Carboxen 1000) |
| Thermal Desorption Time | ≤30 s |
| Detection Range | Sub-ppb to ppt-level VOCs in gaseous matrices |
| Solvent-Free Operation | Yes |
| Storage Stability | Sealed with PTFE caps at both ends |
Show next