- All
- Favorite
- Popular
- Most rated
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1600 °C / 1750 °C / 1800 °C (configurable) |
| Chamber Volume | 16 L – 70 L |
| Heating Element | Dual-side MoSi₂ (optional rear-wall configuration) |
| Chamber Lining | High-purity alumina fiber insulation |
| External Casing | Polished stainless steel (AISI 304) |
| Door Mechanism | Parallel-guided safety door |
| Cooling | Optional forced-air cooling system |
| Exhaust | Top-mounted vent port with optional automatic exhaust lid |
| Atmosphere Options | Inert gas inlet (N₂, Ar), manual or programmable gas mixing module |
| Control System | Silent solid-state relay regulation with ±1 °C temperature stability (at setpoint) |
| Compliance | Designed per EN 61000-6-3 (EMC), EN 61000-6-2, and IEC 61010-1 for laboratory equipment safety |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | MoSi2 |
| Max Operating Temperature | 1700 °C / 1800 °C (short-term) |
| Tube Diameter Range | 38–75 mm |
| Heating Zone Length | 200–400 mm |
| Standard Tube Material | C799 ceramic |
| Insulation | Vacuum-formed high-purity alumina-silica fiber |
| Heating Element | Parallel-mounted MoSi₂ rods |
| Control | Solid-state semiconductor controller |
| Enclosure | Dual-wall housing with rear ventilation |
| Safety | EN 60519-2 compliant overtemperature limiter |
| Optional Configurations | Three-zone temperature control, vertical orientation with base stand, water-cooled flanges, gas-tight stainless steel flanges, manual/automated gas supply systems, internal water-cooling for rapid cooldown |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | KLS 07/11/M (1150 °C) / KLS 05/13/M (1300 °C) |
| Max Operating Temperature | 1150 °C or 1300 °C |
| Chamber Construction | High-purity ceramic muffle liner |
| Heating Configuration | Four-sided embedded heating elements |
| Insulation | Dual-wall steel housing with rear ventilation and low-surface-temperature design |
| Door Type | Top-lifting (KLS 07/11/M) or side-hinged (KLS 05/13/M) with ceramic fiber insulation |
| Control System | Silent solid-state relay temperature controller |
| Safety | EN 60519-2 compliant overtemperature limiter |
| Accessories | Stackable crucibles, ceramic/stainless steel collection trays (1300 °C / 1100 °C max), heat-resistant tongs (300 mm / 500 mm), gloves (600 °C / 900 °C) |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1500 °C, 1600 °C, 1750 °C, or 1800 °C |
| Chamber Uniformity | ±3 °C (at setpoint) |
| Construction | Dual-wall insulated cabinet with rear ventilation |
| Insulation | High-purity alumina fiber (low thermal conductivity, <0.12 W/m·K at 1000 °C) |
| Heating Elements | Dual-side mounted molybdenum disilicide (MoSi₂) rods |
| Control System | Solid-state relay (SSR) with PID algorithm |
| Temperature Accuracy | ±1 °C (typical, within operating range) |
| Safety Compliance | EN 60519-2 certified overtemperature protection |
| Optional Features | Motorized bottom door, inert gas inlet port, active cooling module, programmable exhaust damper |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1400 °C / 1500 °C / 1600 °C |
| Heating Element | Silicon Carbide (SiC) rods, laterally mounted |
| Chamber Lining | Ceramic fiber insulation |
| Enclosure | Dual-wall construction with rear ventilation |
| Door Type | Top-hinged lift door with reinforced fiber seal |
| Base Lining | High-temperature ceramic fiber board |
| Standard Accessories | Ceramic hearth plate |
| Temperature Control | Solid-state relay with PID algorithm |
| Exhaust Port | Integrated vent opening on top |
| Surface Temperature | <60 °C at ambient conditions |
| Compliance | Designed to meet EN 61000-6-3 (EMC), EN 61000-6-2, and general lab safety requirements per DIN VDE 0701-1 |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | TC-UF Series (1100 °C / 1200 °C variants) |
| Temperature Range | Up to 1100 °C or 1200 °C |
| Construction | Stainless steel exterior, high-purity ceramic fiber insulation |
| Heating Element | Embedded resistance wire in ceramic heating plates |
| Control System | Silent solid-state relay with PID temperature regulation |
| Safety | Dual-stage overtemperature protection per EN 60519-2 |
| Exhaust Options | Optional exhaust chimney with fan and catalytic converter |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Compact Tube Furnace |
| Max Operating Temperature | 1100 °C (single-zone) / 1300 °C (triple-zone) |
| Tube Diameter | 200 mm |
| Heating Zone Length | 500 mm (extendable) |
| Heating Element Control | Solid-state relays (1100 °C) or semiconductor controllers (1300 °C) |
| Temperature Uniformity | Optimized via vacuum-formed ceramic fiber insulation |
| Safety Compliance | Overtemperature protection per EN 60519-2 |
| Controller Location | Bottom-mounted for ergonomic access |
| Optional Configurations | Vertical orientation, custom tube materials (quartz, alumina, stainless steel), extended heating zones |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | T-Series |
| Max Operating Temperature | 1100 °C / 1200 °C / 1300 °C |
| Chamber Lining | Ceramic Fiber Insulation |
| Heating Configuration | Dual-Side & Top Radiant Heating (Ceramic Tube-Mounted Elements) |
| Control System | Silent Solid-State Relay with PID Regulation |
| Safety Compliance | EN 60519-2 Overtemperature Protection |
| Optional Features | Exhaust Chimney (with/without Fan & Catalyst), Inert Gas Inlet, Mobile Floor Stand, Forced-Air Circulation Kit |
| Chamber Uniformity | ±3 °C at Setpoint (typical, per ISO 8573-1 reference methodology) |
| External Surface Temperature | <55 °C at max operating temperature |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Forced-Air Drying Oven |
| Temperature Range | +10 °C above ambient to 250 °C (optional up to 300 °C) |
| Chamber Volume | 23–715 L |
| Air Circulation | Motor-driven forced convection with adjustable fan speed |
| Control System | Microprocessor-based controller with LCD display |
| Compliance | IQ/OQ documentation available |
| Optional Accessories | PT100 temperature probe, HEPA inlet filter, observation window with LED lighting (models ≥60 L), door lock (models ≥60 L), left-hinged door (except model 700), stainless steel exterior |
| Construction | Stainless steel chamber and housing |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Natural Convection Drying Oven |
| Temperature Range | +5 °C above ambient to 250 °C |
| Max Operating Temperature | 250 °C |
| Chamber Volume | 55–715 L |
| Control System | Microprocessor-based controller with LCD display |
| Compliance | IQ/OQ documentation available |
| Safety Features | Overtemperature protection, insulated double-wall construction, door lock mechanism |
| Optional Accessories | Observation window with LED lighting, PT100 temperature probe, software interface, ducting ports (Ø25/50/100 mm), left-hinged door (except model 700) |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | TCC-Series |
| Control Architecture | Microprocessor-Based PID with Optional Siemens S7 PLC Integration |
| Display | Graphical LCD Interface |
| Expandability | Modular I/O, Software Integration (TCC-View), Remote Monitoring Capability |
| Compliance | DIN ISO 9001 Process Control Requirements, Supports GLP/GMP Data Integrity Protocols (with Audit Trail Enabled Software Option) |
| Power Control | Solid-State Relays / SCR Phase-Angle Control / Multi-Zone DC-Driven Heating Management |
| Connectivity | RS485/Modbus RTU, Ethernet (Optional), USB Data Export |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Compact Muffle Furnace |
| Max Operating Temperature | 1000 °C |
| Chamber Lining | Ceramic Fiber Insulation |
| Heating Configuration | Quadrilateral (4-Side) Heating Elements |
| Control System | Silent Solid-State Relay |
| Door Orientation | Side-Opening |
| Exhaust Port | Rear Wall Mounted |
| Safety | EN 60519-2 Compliant Over-Temperature Cut-Off Limiter |
| Accessories Included | Exhaust Chimney, Thermal Safety Limiter |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Vertical-Lift Muffle Furnace |
| Max Operating Temperature | 1600 °C / 1750 °C / 1800 °C |
| Chamber Volume | 2 L (benchtop), 4 L (benchtop), up to 2000 L (industrial vertical) |
| Heating Element | MoSi₂ |
| Insulation | High-purity alumina fiber |
| Construction | Dual-wall stainless steel housing with rear ventilation |
| Lift Mechanism | Motorized base-lift or furnace-bottom lift configuration |
| Optional Features | Inert gas inlet, automatic exhaust flap, protective atmosphere port, reinforced load-bearing base |
| Compliance | Designed per IEC 61000-6-3, EN 60519-1, and applicable parts of ISO/IEC 17025 for laboratory thermal equipment |
| Brand | ThermConcept |
|---|---|
| Origin | Germany |
| Model | Flip-Open Tube Furnace |
| Max Operating Temperature | 1100 °C |
| Tube Diameter | Ø300 mm |
| Heating Zone Length | Up to 500 mm (extendable) |
| Control Architecture | Single-Zone or Triple-Zone PID |
| Cooling Method | Rapid air-cooling via hinged outer casing |
| Safety Compliance | EN 60519-2 overtemperature protection limiter |
| Mounting | Base-mounted vertical operation |
| Controller Location | Bottom-mounted for ergonomic access |
| Heating Element Control | Solid-state relay-driven |
| Temperature Uniformity | Optimized via axial zoning (triple-zone model) |
| Enclosure Design | Hinged front-opening shell for法兰 and tube insertion |
Show next