Optical Measurement Instruments
Filter
Showing 2791–2820 of 3895 results
| Brand | Ophir |
|---|---|
| Origin | Israel |
| Model | F100A-PF-DIF-18 |
| Power Range | 50 mW – 100 kW |
| Wavelength Range | 0.15–20 µm |
| Cooling | Forced-air & Water-cooled |
| Aperture | 18 mm |
| Damage Threshold | Up to 39 kW/cm² |
| Response Time | 1.5–2.5 s |
| Calibration | Multi-wavelength (NIST-traceable) |
| Compliance | ISO/IEC 17025 accredited calibration available |
| Output | Analog (BNC), Digital (via Ophir StarLab or Nova II interface) |
| Brand | OPHIR |
|---|---|
| Origin | Israel |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PD Series |
| Measurement Range (Typical) | 10 pW to 3 W |
| Sensor Type | Silicon/UV-enhanced/InGaAs Photodiode |
| Spectral Range | 190 nm – 1800 nm (model-dependent) |
| Interface | USB, RS-232, Analog Output |
| Software Compatibility | OPHIR StarLab, LabVIEW™ Drivers, MATLAB® Support |
| Compliance | ISO/IEC 17025 Accredited Calibration Available |
| Optional Accessories | Rotatable Mount, Neutral Density Filters, Fiber Adapters, SM1-Compatible Threaded Housing |
| Brand | OPHIR |
|---|---|
| Origin | USA |
| Model | PD-300 |
| Wavelength Range | 200–1800 nm |
| Minimum Detectable Power | 10 pW |
| Detector Type | Silicon Photodiode with CIE Correction & Optional Integrating Sphere |
| Background Noise Suppression | Patented Auto-Nulling Circuitry |
| Form Factor | Ultra-Thin, Compact Housing with Rotatable Mount and Fiber Adapter Option |
| Brand | Ophir |
|---|---|
| Origin | Israel |
| Model | PD10-pJ-C |
| Detector Type | Silicon Photodiode |
| Minimum Measurable Pulse Energy | 10 pJ |
| Maximum Repetition Rate | 20 kHz |
| Spectral Range | 190–1800 nm |
| Output Connector | SMA |
| Damage Threshold | >100 MW/cm² (for 10 ns pulses at 1064 nm) |
| Active Area | 10 mm Ø |
| Rise Time | <1 ns |
| Interface | Compatible with Ophir StarLite, Juno, Vega, and Nova II meters |
| Brand | Ophir |
|---|---|
| Origin | France |
| Sensor Type | Photodiode-based |
| Max Continuous Power | 3 W (with built-in attenuator) |
| Power Range | 10 pW – 3 W |
| Wavelength Range | 190–1100 nm |
| Linearity | ±0.5% (up to 2 mW), ±1% (with attenuator, up to 3 W) |
| Damage Threshold | 10 W/cm² (CW), 0.1 J/cm² (pulsed, 10 ns) |
| Output Signal | Analog voltage (1 V per 1 W typical) |
| Connector | BNC |
| Brand | Ophir |
|---|---|
| Origin | France |
| Type | Pyroelectric Energy Sensor |
| Max. Repetition Rate | 25 kHz |
| Pulse Width Range | 10 ns – 20 ms |
| Energy Range | 10 µJ – 50 J |
| Spectral Range | 0.19–20 µm (with appropriate absorber) |
| Calibration Uncertainty | ±3% (k=2) |
| Rise Time | ~1.5 ms (BF-type) |
| Damage Threshold | 1 J/cm² (1064 nm, 10 ns) |
| Interface | USB or RS-232 (via StarLab or Nova II meter) |
| Brand | Ophir |
|---|---|
| Origin | Israel |
| Model | Pyrocam III / Pyrocam IV |
| Wavelength Range | 13–355 nm & 1.06–3000 µm |
| Detector Type | Thermopile-based 2D array |
| Interface | USB 2.0 or GigE (model-dependent) |
| Active Area | Up to 12.5 × 12.5 mm² |
| Pixel Resolution | 128 × 128 (Pyrocam III), 320 × 320 (Pyrocam IV) |
| Damage Threshold | ≥500 MW/cm² (ns pulses), ≥10 kW/cm² (CW, with optional attenuators) |
| Compliance | CE, RoHS, ISO 17025 traceable calibration available |
| Brand | Ophir |
|---|---|
| Origin | Israel |
| Model | SP503U / SP620U |
| Interface Options | USB 2.0 / IEEE-1394 (FireWire) / Gigabit Ethernet |
| Mount | C-Mount |
| Sensor Type | Monochrome Silicon CCD |
| Active Area Options | 6.4 × 4.8 mm (SP503U), 11.3 × 8.5 mm (SP620U) |
| Pixel Pitch | 6.45 µm (SP503U), 7.4 µm (SP620U) |
| Resolution | 1000 × 750 (SP503U), 1536 × 1152 (SP620U) |
| Spectral Range | 190–1100 nm |
| Dynamic Range | >60 dB (typ.) |
| Cooling | Thermoelectric (TE) stabilization optional |
| Compliance | CE, RoHS, FDA 21 CFR Part 11 ready (via BeamGage software) |
| Brand | Ophir |
|---|---|
| Origin | France |
| Model | StarBright |
| Sensor Compatibility | Thermopile, BeamTrack, Pyroelectric (PE-C series), Photodiode |
| Display | 320×240 color TFT LCD |
| Measurement Modes | Digital bar graph, analog needle, real-time line plot (for laser tuning), pulse waveform, Pass/Fail, beam position, stability index, live statistics |
| Sampling Rate | Up to 5 kHz (with pyroelectric sensors) |
| Data Processing | Baseline normalization, density scaling, ratio functions, composite mathematical operations |
| Data Storage | USB flash drive support (unlimited capacity) |
| Interfaces | USB 2.0, RS-232 |
| Software | StarLab PC application, scriptable command files |
| Instrument Drivers | LabVIEW VIs, COM object API |
| Advanced Capabilities | Pulse power measurement (thermopile), exposure energy integration (photodiode) |
| Brand | Ophir |
|---|---|
| Origin | Israel |
| Product Series | Vega, Nova II, LaserStar, Nova, StarLite |
| Probe Compatibility | Thermopile, Photodiode, Pyroelectric, and Integrating Sphere Sensors |
| Measurement Range | 10 pW – 150 W (CW), 15 µJ – 300 J (pulsed) |
| Wavelength Coverage | 193 nm – 20 µm |
| Compliance | ISO/IEC 17025-accredited calibration, supports GLP/GMP data integrity requirements |
| Brand | Ophir |
|---|---|
| Origin | Israel |
| Model | Vega / Nova II |
| Display | 320 × 240 TFT (Vega) / LCD (Nova II) |
| Data Logging Rate (with Pyroelectric Sensors) | Up to 4,000 Hz |
| Internal Memory | 250,000 (Vega) / 54,000 (Nova II) readings |
| Interfaces | USB, RS232 |
| Analog Output | Yes |
| Software Compatibility | StarLab, StarCom, LabVIEW, COM Object, ActiveX |
| Probe Compatibility | Thermopile, BeamTrack, Pyroelectric, Photodiode, RP sensors |
| Brand | Ophir |
|---|---|
| Origin | Israel |
| Model | VEGA |
| Probe Compatibility | Thermopile, Pyroelectric, Photodiode, BeamTrack, RP Sensors |
| Display | 320×240 TFT Color LCD |
| Data Storage Capacity | 250,000 readings |
| Sampling Rate (with Pyroelectric Probes) | Up to 4,000 Hz |
| Interface | USB 2.0, RS232, Optional GPIB |
| Software Integration | StarLab, StarCom, LabVIEW, COM Object, ActiveX |
| Compliance | CE, RoHS, ISO/IEC 17025 traceable calibration support |
| Brand | Ophir |
|---|---|
| Origin | Israel |
| Model | XC-130 |
| Detector Material | Indium Gallium Arsenide (InGaAs) |
| Spectral Range | 900–1700 nm |
| Pixel Format | 640 × 512 |
| Pixel Pitch | 15 µm |
| Readout Noise | <100 e⁻ (rms) |
| Dark Current | <0.1 e⁻/pix/s @ −10 °C |
| Exposure Time | 1 µs to 10 s |
| Cooling | Thermoelectric (TEC), stabilized to −10 °C |
| Interface | Camera Link or GigE Vision |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | OPOTEK |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Opolette (HR) Series |
| Pump Wavelength Options | 1064 nm, 532 nm, 355 nm |
| Repetition Rate | Up to 100 Hz |
| Tuning Range (Signal + Idler) | ~650–2600 nm (with UV Extension: 210–410 nm) |
| Output Configuration | Coaxial signal and idler beams via polarization-based separation |
| Laser Head Dimensions | 305 × 178 × 93 mm |
| Control Interface | Fully automated software-controlled wavelength, energy, and repetition rate adjustment |
| Core Architecture | Monolithic, hermetically sealed pump + OPO module |
| Brand | OPOTEK |
|---|---|
| Origin | USA |
| Model | Opolette |
| Pump Wavelengths | 1064 nm, 532 nm, 355 nm |
| Repetition Rate | up to 100 Hz |
| Output Configuration | Co-axial signal + idler beams via polarization separation |
| Tuning Range (with UV option) | 210–410 nm (UV), ~410–2600 nm (IR) |
| Dimensions | 305 × 178 × 125 mm |
| Integration | Monolithic pump + OPO cavity in sealed, alignment-free housing |
| Control | Fully automated software interface for wavelength, energy, and repetition rate adjustment |
| Compliance | Designed for laboratory integration under ISO/IEC 17025-aligned optical measurement environments |
| Brand | OPOTEK |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Phocus Series |
| Core Technology | Solid-State Pumped OPO System |
| Max Pulse Energy | 120 mJ |
| Tuning Range | Visible to Mid-IR (e.g., 410–2400 nm, depending on configuration) |
| Pump Source | Integrated Q-Switched Nd:YAG Laser |
| Pulse Width | ~5–8 ns |
| Repetition Rate | 10–100 Hz (configurable) |
| Beam Quality | M² < 1.3 |
| Cooling | Air or Water (model-dependent) |
| Control Interface | USB/Ethernet with SDK for LabVIEW, Python, MATLAB |
| Brand | OPOTEK |
|---|---|
| Origin | USA |
| Model | Phocus |
| Output Energy | Up to 120 mJ |
| Wavelength Range | Near-Infrared (NIR) Tunable |
| Pump Architecture | Integrated Diode-Pumped Solid-State (DPSS) Pump + OPO Oscillator |
| Cavity Design | Patented Ring-OPO Configuration |
| Control Interface | Fully Automated Open-Source Software Platform |
| Compliance | CE, RoHS, FDA 21 CFR Part 11–Ready Software Architecture |
| Optional Accessories | Fiber-Coupled Output Module, Motorized Variable Attenuator, Mobile Integration Cart |
| Brand | OPOTEK |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Radiant |
| Core Architecture | Solid-State Pump Laser + Monolithically Integrated Optical Parametric Oscillator (OPO) |
| Pump Wavelength Options | 1064 nm, 532 nm, 355 nm |
| Tuning Range (with UV Extension) | 189–410 nm (UV), 410–2600 nm (Visible–IR) |
| Output Configuration | Polarization-Based Signal/Idler Separation via Single Collinear Beam Exit |
| Control Interface | Fully Automated Software-Controlled Wavelength, Pulse Energy, and Repetition Rate Adjustment |
| Primary Applications | Particle Image Velocimetry (PIV), Photoacoustic Imaging, Nonlinear Spectroscopy, Laser Mass Spectrometry, Fluorescence Lifetime Imaging (FLIM), Ultrafast Pump-Probe Studies |
| Brand | OPOTEK |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | VIBRANT (HE) Series |
| Core Architecture | Solid-State Pump Laser + Monolithic OPO Cavity + Integrated Control Electronics |
| Wavelength Range | 210–3450 nm (tunable, model-dependent) |
| Pulse Energy | Up to 75 mJ (IR), 47 mJ (visible), 35 mJ (UV-capable models) |
| Repetition Rate | 100 Hz |
| Pump Source | Diode-Pumped Solid-State (DPSS) Nd:YAG (355 nm or 532 nm) |
| Output Configuration | Free-space beam (fiber-coupling optional) |
| Control Interface | Fully automated software control with SDK for custom integration |
| Compliance | CE-marked |
| designed to meet IEC 60825-1 | 2014 Class 4 laser safety requirements |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MLCS |
| Price Range | USD 42,000 – 70,000 |
| Brand | Optec |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Custom |
| Price Range | USD 42,000 – 70,000 |
| Mounting Options | Vertical & Horizontal Adjustable Head Stand |
| Adjustment Axes | 2-Axis Precision Kinematic Mount |
| Support Fixture | V-Groove Alignment Slot |
| Angular Resolution | ≤1 arcsecond |
| Output | Real-Time Image + Numeric Readout |
| Software Features | Pass/Fail Thresholding, Exportable Measurement Reports |
| Compliance | Designed for ISO 10110-3 and ISO 11146 alignment verification workflows |
| Brand | Optec |
|---|---|
| Origin | USA |
| Model | NGN-3A |
| Wavelength | 530 nm (±40 nm bandwidth) |
| Scattering Angle Integration | 5°–175° |
| Measurement Range | 0–30,000 Mm⁻¹ (scattering coefficient), 0–10,000 µg/m³ (PM₂.₅ mass concentration) |
| Resolution | ±1 Mm⁻¹ or ±0.3 µg/m³ |
| Cutpoint | 2.5 µm at 7 L/min |
| Sample Flow Control | Adjustable pump, critical orifice, pressure transducer |
| Heating | Integrated sample heater (chamber temperature maintained ≥10°C above ambient) |
| Calibration | Automated clean-air calibration (user-scheduled), manual clean-air & span-gas (SUVA-134a) verification |
| Power | 13.8 VDC, 10 A |
| Operating Temperature | −20°C to +45°C |
| Relative Humidity | 0–100% RH |
| Data Interface | RS232 serial, analog outputs (0–5 V or 4–20 mA), local LCD with keypad |
| Compliance | Designed for IMPROVE network specifications, compatible with US NPS, EPA, and international visibility monitoring protocols |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | CIR-235 |
| Pricing | Available Upon Request |
| Brand | Optiphase |
|---|---|
| Origin | USA |
| Model | MFI/MZI |
| Wavelength Range | 1064–1550 nm |
| Drive Interface | Front-panel BNC for PZ1 Piezoelectric Fiber Stretcher |
| Application Focus | Laser Phase Noise Measurement, Frequency Noise Characterization, and Fiber-Optic Sensor Interrogation |
| Compliance Context | Designed for laboratory-grade metrology in alignment with ISO/IEC 17025 traceable optical measurement practices |
| Brand | Optiphase |
|---|---|
| Origin | USA |
| Model | MFI-10-50, MFI-13-50, MFI-15-50 |
| Operating Wavelength | 1064 nm, 1310 nm, 1550 nm |
| Insertion Loss | <1.5 dB |
| Optical Path Difference (OPD) Mismatch | 0 m (nominal), ±10 cm tolerance |
| Modulation Constant | 2.5 rad/V (1064 nm), 2.0 rad/V (1310 nm), 1.6 rad/V (1550 nm) |
| PZT Drive Interface | BNC |
| Max Optical Power Handling | 250 mW |
| Delay Fiber Length (standard) | 50 m (customizable from 0.5 m to 1000 m) |
| Fiber Type | HI-1060 (1064 nm), SMF-28e (1310/1550 nm) |
| Connector | FC/APC |
| Package Dimensions | 260 × 160 × 90 mm |
| Weight | ~2.7 kg |
| Brand | Optiphase |
|---|---|
| Origin | USA |
| Model | OPD-4000 |
| Resolution | 6 µrad |
| Output Format | 32-bit digital, ±2000 fringes range |
| Modulation Frequency | Adjustable |
| Output Options | Digital and analog with selectable high-pass filtering |
| Data Processing | Optional averaging |
| Control Mode | Servo control (selectable on/off) |
| Receiver Configuration | Polarization-diverse receiver (optional) |
| Integrated Photoreceiver | Yes |
| Interface | USB 2.0 |
| Software | PhaseView™ |
| Brand | Optiphase |
|---|---|
| Origin | USA |
| Model | PZ1 |
| Type | Piezoelectric Fiber-Strain-Based Phase Modulator |
| Core Technology | Multilayer Coiled SMF/PMF on PZT Actuator |
| Compliance | RoHS-compliant housing, GLP-ready calibration traceability |
| Optical Interface | SMF-28e or Panda PMF (1550 nm), 900 µm loose tube, FC/PC / FC/APC optional |
| Electrical Interface | 46 cm, 30 AWG floating coaxial leads |
| Operating Voltage | ±500 V |
| Frequency Range | DC–80 kHz & 120–160 kHz resonance bands |
| Modulation Efficiency | 1 rad/V @1300 nm, 0.2 rad/V @1550 nm |
| Insertion Loss | <0.5 dB (typ. 0.2 dB) |
| Polarization Extinction Ratio | ≥24 dB (bare fiber), ≥22 dB (with connector) |
| Package Dimensions | 51 × 51 × 21.5 mm |
| Weight | 162 g |
| Operating Temperature | 0–70 °C |
| Brand | Optiphase |
|---|---|
| Origin | USA |
| Model | PZ1 / PZ2 |
| Operating Wavelength | 1260–1625 nm (SMF-28), 1550 nm (PM fiber) |
| Modulation Coefficient | 1 rad/V @ 1300 nm (PZ1), 27 rad/V @ 1300 nm (PZ2) |
| Frequency Range | DC–80 kHz & 120–160 kHz |
| Optical Loss | ≤0.5 dB (typ. 0.2 dB) |
| Extinction Ratio | ≥24 dB (bare fiber), ≥22 dB (with connector) |
| Max Drive Voltage | ±500 V (PZ1), ±400 V (PZ2) |
| Fiber Length | 12.3 m (PZ1), 40 m (PZ2) |
| Dimensions | 2.0″ × 2.0″ × 0.85″ (PZ1) |
| Weight | 162 g (PZ1), 454 g (PZ2 enclosed) |
| Connector Options | Bare fiber, FC/PC, FC/APC |
| Brand | Optogama |
|---|---|
| Origin | Lithuania |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 532L-21B |
| Output Wavelength | 532 nm (frequency-doubled diode-pumped solid-state) |
| Operation Mode | Continuous Wave (CW) |
| Spectral Linewidth | <0.1 nm (narrow-linewidth variant) |
| Output Power | Up to 21 mW |
| Beam Diameter (1/e²) | ~0.8 mm |
| Beam Divergence (full angle) | <1.5 mrad |
| Polarization Extinction Ratio | >100:1 |
| Power Stability (rms, 8 h) | <1.5% |
| Warm-up Time | <5 min |
| Operating Temperature Range | 15–35 °C |
| Interface | USB 2.0 and TTL analog/digital modulation input |
| Dimensions (L×W×H) | 120 × 70 × 45 mm |
| Weight | 320 g |