Optical Measurement Instruments
Filter
Showing 2821–2850 of 3895 results
| Brand | Optogama |
|---|---|
| Origin | Lithuania |
| Manufacturer Type | OEM Manufacturer (Not Distributor) |
| Product Category | Imported Scientific Laser System |
| Model | Erbium Series |
| Output Wavelengths | 1522 nm, 1531 nm, 1550 nm, or 1602 nm |
| Output Power | Up to 500 mW CW |
| Beam Mode | TEM₀₀ (Diffraction-Limited) |
| Spectral Linewidth | FWHM < 1 nm |
| Power Stability | ±2% over 8 hours |
| Cooling | Air-Cooled |
| Gain Medium | Erbium-Doped Crystal |
| Pump Source | Diode-Pumped |
| Compliance | IEC 60825-1:2014 Class 1M / Class 3R (wavelength-dependent) |
| Brand | Optogama |
|---|---|
| Origin | Lithuania |
| Manufacturer Type | OEM Laser Systems Developer |
| Product Category | Imported |
| Model | Kaukas 4 |
| Core Technology | Diode-Pumped Solid-State (DPSS) Q-Switched Laser |
| Wavelength | 1540 nm |
| Pulse Energy | Up to 3 mJ per pulse |
| Repetition Rate | Up to 5 Hz |
| Pulse Duration | <10 ns (FWHM) |
| Beam Quality (M²) | <1.3 |
| Output Polarization | Linear, >100:1 |
| Cooling | Air-cooled |
| Dimensions (L×W×H) | 220 × 120 × 85 mm |
| Weight | <2.5 kg |
| Compliance | EN 60825-1:2014 Class 1M (Eye-Safe under specified conditions) |
| Wavelength | 1535 nm |
|---|---|
| Pulse Energy | 1 mJ |
| Pulse Duration | ~12 ns |
| Repetition Rate | 1–5 Hz |
| Beam Quality (M²) | ≤2.5 |
| Beam Divergence | ≤6 mrad |
| Q-Switching | Passively Q-switched |
| Pump Requirements | 2 V, 100 A, <5 ms |
| Output Type | Solid-state Nd:YAG-based OPO laser |
| Brand | Optogama |
|---|---|
| Origin | Lithuania |
| Manufacturer Type | OEM Laser System Developer |
| Product Category | Imported Solid-State Laser Source |
| Model | Kaukas ME-LP |
| Pulse Energy | Up to 1 mJ |
| Repetition Rate | Up to 10 Hz |
| Wavelength | 1540 nm |
| Pulse Width | Nanosecond (ns) |
| Pump Current Requirement | ≤20 A |
| Output Configuration | Free-space, TEM₀₀ |
| Cooling | Air-cooled |
| Compliance | IEC 60825-1:2014 Class 1M / Class 3R (with aperture limitation) |
| Brand | Optogama |
|---|---|
| Origin | Lithuania |
| Manufacturer Type | OEM Laser System Supplier |
| Product Category | Imported Instrument |
| Model | Kaukas-HR |
| Output Wavelength | 1540 nm |
| Pulse Energy | up to 50 µJ/pulse |
| Repetition Rate | up to 1 kHz |
| Pulse Width | <10 ns (FWHM) |
| Beam Quality (M²) | <1.3 |
| Operating Temperature Range | 15–35 °C |
| Cooling | Air-cooled |
| Dimensions (L×W×H) | 120 × 80 × 60 mm |
| Weight | <0.8 kg |
| Compliance | EN 60825-1:2014 (Class 1M / Class 4 depending on configuration), IEC 60825-1, ANSI Z136.1-2022 |
| Brand | Optogama |
|---|---|
| Origin | Lithuania |
| Manufacturer Type | OEM Laser Systems Provider |
| Product Type | Solid-State Passively Q-Switched DPSS Laser |
| Model | Waveguard |
| Wavelength Options | 1064 nm (fundamental), + optional harmonic modules at 532 nm, 355 nm, and 266 nm |
| Pulse Width | <1 ns (sub-nanosecond) |
| Peak Power | Up to tens of kW |
| Cavity Length | ~few mm |
| Operating Mode | Single Longitudinal Mode (SLM) |
| Triggering | Internal/External TTL-compatible |
| Control Interface | USB and RS232 |
| Form Factor | Compact OEM-ready platform |
| Compliance | CE-marked, RoHS-compliant, designed for integration into ISO/IEC 17025-compliant optical test benches |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | 247 |
| Optical Interface | FC Connector |
| Reference Bragg Wavelength (Single-Channel) | 1540 nm |
| Sensing Wavelength | 1550 nm |
| Dual-Channel Bragg Wavelengths | 1310 nm & 1550 nm |
| Grating Spacing (Dual-Channel) | 250 µm |
| Refractive Index Range | 1.00–1.45 |
| Sensing Region | Etched Waveguide Cavity for Liquid/Gas Immersion |
| Brand | Optrel |
|---|---|
| Origin | Germany |
| Model | Multiskop |
| Type | Imported Instrument |
| Configuration | Ellipsometry + SPR + Waveguide Mode Analysis + Reflectometry + Brewster Angle Microscopy + SPR Microscopy + Imaging Ellipsometry + Contact Angle Analysis |
| Measurement Speed | Sub-millisecond time resolution (SPR mode) |
| Thickness Resolution | 0.1 nm (ellipsometry) |
| Lateral Resolution | 2 µm (imaging ellipsometry) |
| Vertical Resolution | 0.1 nm (imaging ellipsometry) |
| Typical Field of View (BAM) | 20–200 µm |
| Reflectivity Detection Limit | 10⁻⁶ (BAM) |
| Software Modules | Angle-resolved reflectance scan, Kinetic angle tracking, Reflectance time-series monitoring, Advanced data processing suite |
| Brand | AtumLaser |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Erbius-SF-1550-X |
| Output Power Options | 1 W, 5 W, 10 W |
| Center Wavelength | 1550 nm (tunable within 1535–1580 nm) |
| Linewidth (FWHM) | < 1 kHz |
| Beam Quality (M²) | ≤ 1.05 |
| Power Stability | < ±1% RMS over 8 hours |
| Relative Intensity Noise (RIN) | < −120 dB/Hz @ 1 MHz peak |
| Polarization | Linear (optional) or Random |
| Piezo Tuning Bandwidth | Up to 10 kHz |
| Thermal Tuning Range | 500 pm |
| Operating Temperature | 15–35 °C |
| Cooling | Conductive + optional air cooling |
| Compliance | RoHS, CE, FDA 21 CFR Part 11 (software-controlled variants), ISO 9001-manufactured subsystems |
| Brand | Optronic Laboratories |
|---|---|
| Origin | USA |
| Model | OL-3m |
| Sphere Diameter | 3 meters (customizable from 0.5 m to 3 m) |
| Coating Options | PTFE (for small spheres), Optolon 2 (standard for mid-to-large spheres), Avian-D (domestic housing + imported coating variant) |
| Mounting | Motorized lid actuation available for spheres ≥2 m |
| Compliance | Designed to meet ASTM E1337, CIE S 025/E:2015, and ISO/CIE 19476:2014 requirements for photometric calibration and luminous flux measurement |
| Brand | Optronic Laboratories |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | OL750 / OL756 |
| Price Range | USD 110,000 – 138,000 |
| Brand | Optronic Laboratories |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | OL750D |
| Price Range | USD 110,000 – 135,000 |
| Grating Spectral Range | 200 nm – 30 µm |
| Wavelength Accuracy | ±0.05% |
| Wavelength Repeatability | ±0.01% |
| Reciprocal Linear Dispersion | 2 nm/mm |
| Bandwidth (FWHM) | 0.25–10 nm |
| Stray Light Level | ≤1×10⁻⁸ |
| Grating Size | 68 mm × 68 mm |
| Focal Length | 254 mm (f/4) |
| Chopper Frequency Range | 10–500 Hz |
| Control Interface | RS-422 |
| Nonlinearity Error | <0.1% |
| Silicon Detector (Spectral Range | 200–1100 nm |
| Lead Sulfide (PbS) Detector (Spectral Range | 1000–3200 nm |
| Brand | Optronic Laboratories |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Optolon 2A / Avian-D / Avian-B |
| Price Range | USD $0–7,000 (varies by coating type, surface area, and application support) |
| Brand | Orbeco-Hellige |
|---|---|
| Origin | USA |
| Model | 705-VA2 |
| Compliance | ASTM D1544, AOCS Td 1a |
| Sample Path Length | 10 mm |
| Light Source | Calibrated Tungsten-Halogen Lamp with Daylight-Mimicking Filter |
| Illumination Standard | Simulated North Sky Daylight (CIE Standard Illuminant C, ~6774 K) |
| Configuration | Portable Visual Comparator System with Dual Standard Color Disks (620C-45 & 620C-46), Two Cuvettes, Illuminator, Carrying Case, and Instruction Manual |
| Brand | Orbeco-Hellige |
|---|---|
| Origin | USA |
| Model | 705-VA2 |
| Compliance | ASTM D-1544, AOCS Td 1a |
| Color Scale Range | Gardner No. 1–18 (via dual calibrated discs No.602C-43 and No.602C-44) |
| Sample Vessels | Two cylindrical quartz tubes (Part No. 605-VT) |
| Illumination | Daylight-simulating light source (Part No. 600-DA) |
| Optical System | Precision-aligned prismatic magnifier for side-by-side visual comparison |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INST Laser Instrument |
| Price | Upon Request |
| Core Components | Semiconductor-based Fiber Laser Module |
| Brand | Orbits Lightwave |
|---|---|
| Origin | USA |
| Model | ETH |
| Output Power | >350 mW (oscillator), up to 50 W (with amplifier) |
| Linewidth | <1 Hz (Lorentzian), <200 Hz (over 1 ms) |
| Frequency Stability | <0.25 MHz/°C |
| OSNR | >80 dB |
| SMSR | >75 dB |
| RIN | <-175 dBc/Hz (shot-noise-limited) |
| Brand | Orbits Lightwave |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | ETH-30-1550.12-5-TT20-PZ10B |
| Core Technology | All-Fiber Virtual-Ring SlowLight™ Oscillator |
| Output Power (Oscillator) | >350 mW |
| Amplified Output Power | Up to 50 W |
| Lorentzian Linewidth | <1 Hz |
| 1-ms Linewidth | <200 Hz |
| Frequency Stability | <0.25 MHz/°C |
| Optical Signal-to-Noise Ratio | >80 dB |
| Side-Mode Suppression Ratio | >75 dB |
| Relative Intensity Noise | <−175 dBc/Hz |
| Wavelength | 1550.12 nm |
| Tuning Range (PZT) | ±5 GHz |
| Polarization Extinction Ratio | >25 dB |
| Operating Temperature Range | 15–35 °C |
| Power Supply | ±15 V DC, <2 A |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INST High Power |
| Core Components | Semiconductor-based seed laser + integrated/fiber-coupled optical amplification modules |
| Output Power Range | 0.3–50 W (oscillator-only to externally amplified configurations) |
| Wavelength Options | 1530–1565 nm & 1047–1080 nm |
| Linewidth | <1 Hz (Lorentzian), <1 kHz (1 ms measurement) |
| Frequency Stability | <1 MHz/°C |
| RIN | –165 to –175 dBc/Hz @ 100 MHz |
| OSNR | >90 dBc (0.05 nm RBW) |
| SMSR | >75 dBc (3 MHz RBW) |
| Polarization Extinction Ratio | >23 dB |
| Beam Quality | M² < 1.05 |
| Power Stability | ±0.1% RMS |
| Absolute Wavelength Accuracy | ±0.02–±0.05 nm |
| Operating Temperature | 10–55 °C |
| Power Consumption | 30–50 W |
| Form Factor | 2U 19″ rack-mountable chassis |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HVA-1 |
| Core Component | Semiconductor Laser System Integration Platform |
| Input Voltage Range | 0–5 V |
| Output Voltage Range | –30 to +180 V |
| Small-Signal Bandwidth | 1 kHz |
| Noise Spectral Density | ≤2 nV/√Hz (30 Hz – 10 kHz), ≤100 nV/√Hz (>10 kHz) |
| 1/f Voltage Noise | ≤20 nV/√Hz @ 20 Hz |
| AC Input | 90–264 VAC, 47–63 Hz |
| Power Connector | IEC 320-C14 |
| Dimensions | 3.25 × 6.25 × 7 in (82.6 × 158.8 × 177.8 mm) |
| Weight | 3 lbs (1.36 kg) |
| Operating Temperature | 0–40 °C |
| Operating Humidity | 20–90 % RH (non-condensing) |
| Brand | Orbits Lightwave |
|---|---|
| Origin | USA |
| Model | OL-ETH |
| Core Technology | Semiconductor-based All-Fiber Virtual Ring Cavity Laser |
| Output Power | Up to 350 mW (oscillator-only), scalable to 500 mW |
| Linewidth | <1 Hz (Lorentzian, white-noise-limited) |
| OSNR | >90 dBc (50 pm RBW, at 180 mW) |
| SMSR | >75 dBc (3 MHz RBW) |
| RIN | −175 dBc/Hz @ 100 MHz (at 100 mW) |
| Frequency Stability | <0.25 MHz/°C |
| Polarization Extinction Ratio | >23 dB |
| Wavelength Options | 1530–1565 nm & 1047–1080 nm |
| Tuning | PZT (1–60 GHz), Thermal (0–160 GHz) |
| Absolute Wavelength Accuracy | ±0.02 nm |
| Beam Quality | M² < 1.05 |
| Power Stability | ±0.1% RMS |
| Operating Temperature | 10–55 °C |
| Power Consumption | 5–30 W |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AQ3010 |
| Product Type | Portable |
| Measurement Range | 0.01–19.99 NTU, 20.0–99.9 NTU, 100–1000 NTU |
| Resolution | 0.01 NTU (0.01–19.99), 0.1 NTU (20.0–99.9), 1 NTU (100–1000) |
| Operating Temperature | 0–50 °C (RH 0–90% at 30 °C) |
| Accuracy | ±2% of reading (0–500 NTU) |
| Light Source | Infrared LED compliant with ISO 7027 |
| Power Supply | 4×AAA alkaline batteries (≥3000 measurements) or 4×AAA lithium batteries (≥12,000 measurements) |
| IP Rating | IP67 |
| Auto-ranging | Yes (0–1000 NTU) |
| Calibration Standards | EPA-compliant polymer standards at 0.2, 20, 100, and 800 NTU |
| Sample Cell | 25 mm diameter vials |
| Auto-power-off | After 20 minutes idle |
| Battery Self-test | With diagnostic fault codes |
| Brand | Orion |
|---|---|
| Origin | USA |
| Model | AQ3010 |
| Product Type | Portable |
| Measurement Range | 0.01–1000 NTU |
| Resolution | 0.01 NTU (0.01–19.99 NTU), 0.1 NTU (20.0–99.9 NTU), 1 NTU (100–1000 NTU) |
| Accuracy | ±2% of reading (0–500 NTU), ±3% of reading (501–1000 NTU), ±1 digit |
| Operating Temperature | 0–50 °C |
| Response Time | <6 s |
| Sample Volume | 10 mL |
| Calibration Standards | 0.02, 20.0, 100, and 800 NTU |
| Light Source | ISO 7027-compliant infrared LED |
| Sample Cell | 25 mm diameter vial with alphanumeric ID |
| Power Supply | 4 × AAA alkaline batteries (≥3000 measurements) or 4 × AAA lithium batteries (≥12,000 measurements) |
| Auto-power-off | After 20 min idle |
| Ingress Protection | IP67 |
| Certifications | CE, TÜV, CSA-US (3-in-1), FCC Part 15 |
| Self-diagnostic Function | Yes, with error code display |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AQ4500 |
| Price | Upon Request |
| Instrument Type | Portable |
| Measurement Ranges | EPA 180.1: 0–4000 NTU |
| GLI Method 2 | 0–40 NTU |
| ISO 7027 | 0–150 FNU |
| EBC | 0–24.5 EBC |
| ISO ABSB | 40–4000 FAU |
| IR-Ratio Mode | 0–4000 NTU |
| ASBC | 0–236 ASBC |
| Resolution | 0.001 NTU / 0.01 NTU / 0.1 NTU (auto-ranging) |
| Operating Temperature | −40.0 to +60.0 °C (non-condensing) |
| Accuracy | ±1% of reading |
| Light Source | Dual-wavelength LED (white + infrared) |
| Battery Life | 2500 h (alkaline) / 100,000 h (lithium) |
| Data Storage | 100 measurements |
| Interface | RS232 with 25-pin to 9-pin adapter |
| Calibration Standards | 0, 1, 10, 100, and 1000 NTU |
| Sample Cell | 24 mm diameter cuvette |
| Display | Custom LCD with dual-function touch keys |
| Environmental Compliance | Meets EPA 180.1, ISO 7027, ASBC Beer Methods, EBC Brewing Standards, and ISO 7027 (ABSB) |
| Brand | Otsuka Electronics |
|---|---|
| Origin | Japan |
| Model | RETS-100nx |
| Measurement Range (Retardation) | 0–60,000 nm |
| Wavelength Range | 400–800 nm (optional extensions available) |
| Retardation Repeatability (n=30) | ≤0.08 nm (quartz waveplate, ~600 nm) |
| Cell Gap Range | 0–600 µm (An=0.1) |
| Cell Gap Repeatability (n=30) | ≤0.005 µm (at ~3 µm gap, An=0.1) |
| Axis Detection Repeatability (n=30) | ≤0.08° |
| Spot Diameter | φ2 mm (standard) |
| Light Source | 100 W halogen lamp |
| Detector | Proprietary high-speed multichannel spectrometer (≈500 wavelength channels) |
| Standard Stage | 100×100 mm fixed platform |
| Optional Accessories | Motorized XY stage, tilt-rotary stage for Rth and 3D birefringence analysis, axis-angle compensation module |
| Brand | Oxxius |
|---|---|
| Origin | France |
| Model | L4Cc-Series |
| Wavelength Options | 450 nm, 785 nm, 808 nm, 915 nm, 980 nm, 1064 nm |
| Output Power Range | Up to 500 mW (model-dependent) |
| Beam Mode | TEM₀₀ (Single Transverse Mode) |
| Modulation | TTL & Analog (up to 500 kHz) |
| Compliance | CDRH Class 3B / IEC 60825-1 |
| Interface | USB 2.0 + RS-232 |
| Control | Embedded Smart Chip with Real-Time Diagnostics |
| Form Factor | Compact OEM Module or Benchtop Plug-and-Play Unit |
| Software Support | Oxxius Lasea™ v3.x (Windows/macOS/Linux) |
| Regulatory | CE, RoHS, FDA 21 CFR Part 11 Ready (Audit Trail & Electronic Signature Optional) |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LBX-405C |
| Output Wavelength | 405 nm ± 5 nm |
| Output Power Options | 100 / 120 / 300 mW (single transverse mode, TEM₀₀) |
| Beam Diameter (1/e²) | 0.9 mm (TEM₀₀) or 1.2 × 2.8 mm (multi-mode), measured at 50 mm from aperture |
| Beam Divergence (1/e², full angle, far field) | 0.6 mrad (TEM₀₀) |
| Beam Quality | M² < 1.25 (TEM₀₀) |
| Power Stability | ±0.5% peak-to-peak over 8 h and ±3 °C |
| Optical Noise | <0.5% RMS (10 Hz – 2 MHz) |
| Polarization Ratio | >100:1 (vertical, ±3°) |
| Pointing Stability | <5 µrad/°C |
| TTL Modulation Bandwidth | 20 MHz |
| Analog Modulation Bandwidth | 4 MHz |
| Operating Temperature | 10–50 °C |
| Control Interfaces | USB, RS-232, analog voltage input |
| Laser Head Dimensions | 100 × 40 × 40 mm |
| Weight | 300 g |
| Power Supply | 200 V AC |
| Optional Fiber Coupling | Polarization-maintaining, single-mode, or multimode fiber with SMA905 / FC/APC / FC/PC connectors |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LBX-488 |
| Wavelength | 488 nm ±2/−5 nm |
| Output Power Options | 50 / 100 / 150 / 200 mW (adjustable) |
| Beam Diameter | 1.2 mm (1/e², at 50 mm from aperture) |
| Beam Divergence | 0.6 mrad (1/e², full angle, far field) |
| Beam Quality | TEM₀₀, M² < 1.25 |
| Power Stability | ±0.5% p-p (over 8 h, ±3 °C) |
| Optical Noise | <0.5% rms (10 Hz – 2 MHz) |
| Polarization Ratio | >100:1 (vertical ±3°) |
| Pointing Stability | <5 µrad/°C |
| TTL Modulation Bandwidth | 20 MHz |
| Analog Modulation Bandwidth | 4 MHz |
| Operating Temperature | 10–50 °C |
| Operation Modes | APC, ACC, MAC |
| Interface Options | USB, RS232, Analog |
| Laser Head Dimensions | 100 × 40 × 40 mm |
| Weight | 300 g |
| Power Supply | 200 V AC |
| Optional Fiber Coupling | Polarization-Maintaining (PM), Single-Mode (SM), or Multi-Mode (MM) fiber |
| connectors | SMA905, FC/APC, FC/PC |
| Brand | Oxxius |
|---|---|
| Origin | France |
| Laser Type | Diode-Based Continuous-Wave (CW) |
| Wavelengths | 375 nm, 405 nm, 488 nm, 638 nm |
| Output | Free-Space Multimode Elliptical Beam |
| Optional Fiber Coupling | Removable Multimode Fiber Pigtail |
| Packaging | Compact OEM-Ready Laser Head with Integrated Driver (Standard 32 mm × 115 mm Cylindrical Form Factor) |
| Control Interface | Analog Modulation (0–5 V), TTL Modulation, USB 2.0, RS-232 |
| Compliance | FDA 21 CFR Part 1040.10/1040.11 (Class 3B/4), CE, RoHS, IEC 60825-1 |
| Smart Features | Embedded EEPROM for calibration data, real-time operational logging, remote diagnostics, firmware-upgradable controller |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | LBX Series (CW Semiconductor & Solid-State Lasers for Low-Power Detection) |
| Output Configuration | Free-Space or Fiber-Coupled Options Available |
| Modulation | TTL up to 150 MHz, Analog up to 3 MHz |
| Wavelength Options | 375, 405, 445, 488, 638, 642, 660, 785, 830 nm |
| Control Interface | USB + RS232 |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 3B/4 (wavelength- and power-dependent) |