Other Common Laboratory Equipment
Filter
Showing 901–930 of 1891 results
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | OTF-1200X-VHP4 |
| Input Voltage | AC 220 V, 50/60 Hz |
| Max. Heating Power | 2.2 kW |
| Max. Operating Temperature | 1100 °C |
| Temperature Uniformity | ±1 °C |
| Heating Zone Length | 300 mm |
| Quartz Tube Dimensions | OD 100 mm × ID 95 mm × L 1200 mm |
| Hydraulic System | Adjustable piston cylinder (Ø25 mm), 15 mm stroke, max. load 20 T, max. applied pressure 6 T (10 MPa on gauge) |
| Vacuum Performance | 10⁻² torr (mechanical pump), 10⁻⁵ torr (turbo-molecular pump) |
| Overall Dimensions | 1050 mm × 750 mm × 1750 mm |
| Net Weight | 365 kg |
| Optional Accessories | Rotary vane vacuum pump, recirculating chiller, high-temperature pressure-resistant dies |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | OTF-1500X |
| Voltage | AC 220 V, 50/60 Hz |
| Power Input | 6 kW |
| Tube Material | High-Purity Alumina (Al₂O₃) |
| Standard Tube Dimensions | Ø60 mm OD × Ø53 mm ID × 1000 mm L |
| Optional Tube | Ø80 mm OD × Ø73 mm ID × 1000 mm L |
| Heating Elements | 16 × SiC rods (1500 °C rated), Φ14 mm × 350 mm |
| Thermocouple Type | S-type (Platinum/Rhodium) |
| Heating Zone Length | 390 mm |
| Effective Uniform Temperature Zone | 150 mm (±1 °C) |
| Max Operating Temperature | 1500 °C |
| Continuous Service Temperature | 1400 °C |
| Recommended Ramp Rate | 10 °C/min |
| Temperature Control | PID with 30-segment programmable ramp-soak profile |
| Control Accuracy | ±1 °C |
| Safety Features | Door-interlocked power cutoff, overheat protection, thermocouple break detection |
| Vacuum Performance | 10⁻² torr (with rotary vane pump), 10⁻⁵ torr (with turbomolecular pumping system) |
| Communication Interface | RS485 (PC software optional) |
| Certifications | CE, UL/MET/CSA (for all >24 V components), TÜV/CAS certification available upon customer-requested third-party testing |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | OTF-1500X-III |
| Pricing | Upon Request |
| Power Supply | AC 220 V, 50/60 Hz, 6.6 kW |
| Max Temperature | 1500 °C |
| Continuous Operating Temp | 1400 °C |
| Heating Zones | 3 (200 mm each) |
| Uniform Zone Length | 350 mm |
| Tube Dimensions | Ø80 mm OD × Ø71 mm ID × 1200 mm L |
| Heating Element | Silicon Carbide Rods |
| Insulation | High-Purity Alumina Fiber + Imported Al₂O₃ Reflective Coating |
| Control Precision | ±1 °C |
| Vacuum Level | 10⁻³ torr (mechanical pump), 10⁻⁵ torr (turbo-molecular pump) |
| Cooling | Dual-layer shell with forced-air cooling |
| Surface Temp | <60 °C |
| Certification | CE |
| Weight | 110 kg |
| Footprint | 860 × 280 × 680 mm |
| Recommended Ramp Rate | 5 °C/min |
| Thermocouples | Three S-type |
| Standard Accessories | 1× mullite tube, 3× S-type thermocouples |
| Optional | PC-based control software |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | PC-50L |
| Internal Volume | 50 L |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Stability | ≤ ±0.5 °C |
| Ramp Rate (25 °C → +150 °C) | ≤ 50 min |
| Ramp Rate (25 °C → −40 °C) | ≤ 40 min |
| Ramp Rate (25 °C → −70 °C) | ≤ 70 min |
| Chamber Dimensions (W×D×H) | 400 × 400 × 400 mm (304 Stainless Steel Interior) |
| External Dimensions (W×D×H) | 600 × 800 × 1200 mm |
| Weight | ~150 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 2 kW |
| Compressor | Original Imported Tecumseh (France) High-Efficiency Hermetic Compressor |
| Refrigerant | Environmentally Compliant HFC Blend |
| Control System | PLC-Based Touchscreen HMI with USB Data Export |
| Programmable Profiles | Up to 10 Segments |
| Observation Port | Dual φ50 mm Feedthrough Ports with Cryogenic Insulation |
| Door Configuration | Top-Hinged Opening Design |
| Brand | KJ GROUP (Shenyang Kejing) |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PCE-6S |
| Quotation | Available Upon Request |
| Chamber Material | Fused Quartz |
| Rotation Mechanism | Motorized Horizontal Bottle Rotation |
| RF Excitation | Capacitive Coupling |
| Vacuum System | Integrated Mechanical Pump |
| Compliance | CE-marked per IEC 61000-6-3/6-4 |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PG150-PC |
| Price | Upon Request |
| Measurement Principle | Fizeau Interferometry |
| Effective Aperture | 150 mm |
| Light Source | Semiconductor Laser, 635 nm |
| Magnification | Fixed |
| Display Interface | PC Software or Dedicated Monitor |
| Reference Flat Accuracy | PV ≤ λ/20 |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Dimensions (W × D × H) | 40 cm × 40 cm × 90 cm |
| Weight | 75 kg |
| Reference Flat Material | Fused Silica (Corning 7980) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | PM200 |
| Pricing | Available Upon Request |
| Sample Diameter | φ3 mm |
| Foil Thickness Range | 50–120 µm |
| Rated Punch Cycles | ≥20,000 |
| Punch Clearance | 1.5 mm |
| Dimensions | 100 × 100 × 120 mm |
| Weight | 1 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pouch Cell Laboratory Research System |
| Pricing | Available Upon Request |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-6P |
| Pricing | Upon Request |
| Certification | CE Certified |
| Power Supply | AC 220 V, 50 Hz, 100 W |
| Operating Environment | Altitude < 1000 m, Temperature 10–40 °C, Relative Humidity 45–65 % RH |
| Dimensions (W×D×H) | 260 × 340 × 420 mm |
| Weight | 15 kg |
| Sample Holder Dimensions | 75 × 25 × 2 mm |
| Immersion Length | 60 mm |
| Travel Stroke | 1–80 mm |
| Dip Speed (Auto) | 1–400 mm/min |
| Dip Speed (Manual) | 1–150 mm/min |
| Immersion/Drying Time Range | 1–999 s |
| Dip Cycles | 1–45 |
| Stirring | Independent on/off control per station, dual-speed (low/high) |
| Dip Vessel Capacity | 150 mL × 6 |
| Footprint Requirement | ≥ 500 × 800 mm, Load Capacity ≥ 50 kg |
| Grounding | Mandatory |
| Ventilation | Not required |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-6PB |
| Certification | CE-compliant |
| Power Supply | AC 220 V, 50 Hz, 1200 W |
| Dimensions (W×D×H) | 260 × 340 × 420 mm |
| Weight | 15 kg |
| Sample Holder Dimensions | 75 × 25 × 2 mm |
| Effective Immersion Length | 60 mm |
| Load Cup Capacity | 150 mL (6 units) |
| Heating Range | RT–100 °C (independently controllable per station) |
| Dip Speed | 1–400 mm/min (auto), 1–150 mm/min (manual) |
| Withdrawal Cycles | 1–45 |
| Immersion/Drying Time | 1–999 s |
| Stroke Adjustment | 1–80 mm |
| Stirring Speed | 1–5 rpm (per station, individually switchable) |
| Ambient Operating Conditions | Altitude ≤1000 m, Temperature 10–40 °C, Humidity 45–65 %RH |
| Footprint Requirement | ≥500 × 800 mm, Load Capacity ≥50 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-AADC |
| Quotation | Upon Request |
| Drive Motor | Servo motor |
| Drive Mechanism | Precision lead screw |
| Immersion Time | 0–99 s/min/hour (user-selectable) |
| Cycle Count | 1–999 |
| Input Power | 208–240 VAC, 50/60 Hz |
| Power Consumption | ≤800 W |
| Max. Withdrawal Stroke | 75 mm |
| Control Interface | LED touchscreen with 5 programmable coating profiles |
| Communication | RS232 port on control panel |
| Optional Software | Windows 8–compatible PC-based control software |
| Dimensions (W×D×H) | 570 × 300 × 475 mm |
| Net Weight | 23 kg |
| Standard Accessories | Sample holders (4), 150 mL glass beakers (4) |
| Certification | CE compliant |
| Warranty | 12 months parts & labor, lifetime technical support |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-HT |
| Heating Temperature Range | RT–1000 °C (furnace), RT–800 °C (standard operation with included dip rods) |
| Max. Pulling Speed | 200 mm/min |
| Min. Pulling Speed | 1 mm/min |
| Immersion & Drying Time Setting | 1–999 s |
| Effective Immersion Length | 60 mm |
| Sample Load Capacity | ≤1 kg |
| Furnace Tube Dimensions | Φ50 × 610 mm (ID: Φ45 mm) |
| 炉膛尺寸 | Φ80 × 330 mm |
| Temperature Control Accuracy | ±1 °C |
| Power Supply | AC 220 V, 50 Hz, 50 A |
| Total Power Consumption | 1.6 kW |
| Ambient Operating Conditions | Altitude <1000 m |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM01 |
| Price | Upon Request |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 50 W |
| Withdrawal Speed Range | 1–200 mm/min |
| Effective Immersion Length | 60 mm |
| Immersion & Drying Time Setting | 1–999 s |
| Programmable Coating Cycles | 1–20 |
| Sample Dimensions (Standard) | 75 mm × 25 mm × 2.5 mm |
| Unit Dimensions | 320 mm × 260 mm × 560 mm |
| Net Weight | 18 kg |
| Operating Altitude | ≤1000 m |
| Ambient Temperature Range | 25 °C ±15 °C |
| Relative Humidity | 55 %RH ±10 %RH |
| Motor Type | High-Precision Stepper Motor |
| Vibration Mitigation | Suspended Motor Mounting |
| Optional Accessories | Rapid-Release Sample Clamp, Additional Withdrawal Wires |
| Standard Accessories | Anti-Oscillation Guide Base, Sample Holder Set, Coating Beaker (1 pc), Withdrawal Wires (3 pcs) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM02 |
| Price | Upon Request |
| Touchscreen Interface | 7-inch Color TFT LCD |
| CE Certified | Yes |
| Control System | Industrial PLC |
| Drive Motor | High-Precision Stepper Motor with Suspended Mounting for Vibration Damping |
| Power Supply | AC 220 V, 50 Hz, Grounded |
| Rated Power | 50 W |
| Operating Environment | Altitude < 1000 m |
| Dimensions (W×D×H) | 320 × 260 × 560 mm |
| Net Weight | 17 kg |
| Sample Holder Dimensions | 75 × 25 × 2.5 mm |
| Immersion Length | 60 mm |
| Withdrawal Speed Range | 1–200 mm/min (adjustable in 0.1 mm/min increments) |
| Immersion/Drying Time Range | 1–999 s (programmable per cycle) |
| Number of Cycles | 1–20 (fully programmable sequence) |
| Standard Accessories | (1) Sample Clamp Set, (2) Coating Beaker (100 mL), (3) Three Stainless-Steel Withdrawal Wires |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM02-200 |
| Power Supply | AC 220 V, 50 Hz |
| Speed Range | 1–200 mm/min |
| Stroke | 270 mm |
| Max Sample Dimensions | 310 × 260 × 5 mm |
| Load Capacity | ≤5.5 kg |
| Immersion/Drying Time Setting | 1–999 s |
| Cycle Count | 1–20 cycles |
| Motor | Two-phase hybrid stepper motor with microstepping driver |
| Certifications | CE compliant |
| Footprint | 455 × 330 × 890 mm (L×W×H) |
| Working Table Requirement | ≥800 × 600 × 700 mm, ≥200 kg load capacity |
| Environmental Operating Range | Altitude <1000 m, Temperature 10–40 °C, Relative Humidity 45–65 % RH |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM02-500 |
| Power Supply | AC 220 V (50 Hz) / 110 V (60 Hz) |
| Lifting Speed Range | 1–500 mm/min (integer steps) |
| Maximum Load Capacity | ≤100 g |
| Substrate Dimensions (L×W×T) | 75 × 25 × 2.5 mm |
| Effective Immersion Length | 60 mm |
| Immersion & Drying Time Setting Range | 1–999 s |
| Operating Environment | Altitude <1000 m, Temperature 10–40 °C, Relative Humidity 45–65 % RH |
| Footprint Requirement | 800 × 600 × 700 mm, Load Capacity ≥200 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MM02-8P |
| Power Supply | AC 220 V, 50 Hz |
| X-axis Speed Range | 500–5000 mm/min |
| Z-axis Speed Range | 1–200 mm/min |
| Effective Immersion Length | 65 mm |
| Sample Dimensions (per substrate) | 75 × 25 × 2.5 mm |
| Max Simultaneous Substrates | 5 |
| Substrate Positions per Batch | 8 |
| Immersion & Drying Time Range | 1–999 s |
| Cycle Count Range | 1–999 |
| Operating Ambient | ≤1000 m altitude, 10–40 °C, 45–65 %RH |
| Footprint | 900 × 520 × 540 mm |
| Weight | 20 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MMB01 |
| Pricing | Upon Request |
| Power Supply | AC 220 V, 50 Hz, 850 W |
| Lifting Speed Range | 1–200 mm/min |
| Temperature Control Range | RT + 5 °C to 100 °C |
| Temperature Stability | ±1.5 °C |
| Effective Immersion Length | 60 mm |
| Immersion & Drying Time Setting | 1–999 s |
| Programmable Dip Cycles | 1–20 |
| Sample Dimensions Supported | 75 mm × 25 mm × 2.5 mm |
| Footprint | 450 mm × 500 mm × 970 mm |
| Dry Box External Dimensions | 460 mm × 510 mm × 695 mm |
| Working Table Requirement | ≥800 mm × 600 mm × 700 mm, Load Capacity ≥200 kg |
| Environmental Operating Conditions | Altitude ≤1000 m, Ambient Temperature 25 °C ±15 °C, Relative Humidity 55 %RH ±10 %RH |
| Motor Type | High-Precision Stepper Motor with Suspended Mounting for Vibration Damping |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MMB02 |
| Pricing | Upon Request |
| Dip Speed | 1–200 mm/min |
| Temperature Range (Coating Chamber) | RT to 100 °C |
| Temperature Stability | ±1.5 °C |
| Effective Immersion Length | 60 mm |
| Immersion/Drying Time Setting | 1–999 s |
| Cycle Count | 1–20 cycles |
| Sample Dimensions | 75 mm × 25 mm × 2.5 mm |
| 恒温箱尺寸 | 460 mm × 510 mm × 695 mm |
| Overall Unit Dimensions | 450 mm × 500 mm × 970 mm |
| Power Supply | AC 220 V, 50 Hz, Grounded |
| Ambient Operating Conditions | Altitude ≤1000 m, Ambient Temp. 25 °C ±15 °C, RH 55% ±10% |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-MMB02-200 |
| Price | Upon Request |
| Power Supply | 220 V, 50 Hz |
| Heating Power | 2.3 kW |
| Withdrawal Speed Range | 1–200 mm/min |
| Stroke Length | 250 mm |
| Temperature Range | 80–200 °C |
| Temperature Accuracy | ±1.5 °C |
| Fuse Rating | 15 A |
| Sample Dimensions | 407 mm × 229 mm × (1–10) mm |
| Maximum Load Capacity | ≤5 kg |
| Overall Dimensions | 636 mm × 680 mm × 1520 mm |
| Standard Accessories | 1 control unit, 1 immersion bath |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-NMB |
| Price | Upon Request |
| Power Supply | AC 220 V, 50 Hz, 850 W |
| Dip Speed Range | 1–500 nm/s |
| Effective Immersion Length | 60 mm |
| Immersion/Drying Time Setting | 1–999 s |
| Cycles per Run | 1–20 |
| Temperature Control Range (Chamber) | RT+5°C to 100°C |
| Temperature Stability | ±1.5°C |
| Sample Holder Dimensions | 75 × 25 × 2.5 mm |
| Chamber External Dimensions | 460 × 510 × 695 mm |
| Overall Instrument Dimensions | 450 × 500 × 970 mm |
| Weight Capacity of Workbench | ≥200 kg |
| Required Bench Footprint | 800 × 600 × 700 mm |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | PTL-OV5P |
| Power Supply | AC 220 V, 50 Hz, 3 A, 850 W |
| Pulling Speed Range | 1–200 mm/min |
| Temperature Control Range (Chamber) | RT+5°C to 100°C |
| Temperature Uniformity | ±1.5°C |
| Sample Dimensions | 75 mm × 25 mm × 2.5 mm |
| Immersion Length | 60 mm |
| Vial Capacity | Φ60 mm, 150 mL |
| Dwell Time per Station | 1–999 s |
| Coating Cycles per Station | 1–20 |
| Number of Stations | 5 |
| Chamber Dimensions | 460 mm × 510 mm × 695 mm |
| Overall Dimensions | 450 mm × 500 mm × 1060 mm |
| Weight | 45 kg |
| Compliance | CE-certified |
| Operating Environment | 5–40°C, ≤85% RH, altitude <1000 m, no strong vibration or corrosive gases |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-OV6P |
| Pricing | Upon Request |
| Certifications | CE Certified |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 800 W |
| Withdrawal Speed Range | 1–200 mm/min |
| Temperature Control Range (Chamber) | RT + 5 °C to 100 °C |
| Temperature Uniformity | ±1.5 °C |
| Sample Dimensions (Max) | 75 mm × 25 mm × 2.5 mm |
| Immersion Length | 60 mm |
| Immersion & Drying Time Setting Range | 1–999 s |
| Number of Coating Cycles | 1–20 |
| Sample Capacity | 6 positions |
| Vial Specifications | Φ60 mm, 150 mL |
| Chamber External Dimensions | 460 mm × 510 mm × 695 mm |
| System Dimensions | 450 mm × 500 mm × 1060 mm |
| Net Weight | 40 kg |
| Required Workbench | 800 mm × 600 mm × 700 mm, ≥200 kg load capacity |
| Operating Environment | Altitude <1000 m, Ambient Temp. 25 °C ±15 °C, RH 55 % ±10 % |
| Grounding | Mandatory |
| Compressed Air / Water / Ventilation | Not Required |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-UMB |
| Price | Upon Request |
| Certifications | CE compliant |
| Power Supply | AC 220 V, 50 Hz, grounded |
| Operating Environment | Altitude < 1000 m |
| Dimensions (W×D×H) | 460 mm × 510 mm × 970 mm |
| Effective Immersion Length | 60 mm |
| Substrate Dimensions Supported | 75 mm × 25 mm × 2.5 mm |
| Withdrawal Speed Range | 1–500 µm/s |
| Temperature Control Range (Chamber) | RT + 5 to 100 °C |
| Temperature Uniformity | ±1.5 °C |
| Immersion/Drying Time Setting | 1–999 s |
| Cycle Count | 1–20 cycles |
| Control Interface | Color TFT touchscreen with PLC-based logic |
| Drive Mechanism | High-resolution stepper motor with suspended motor mount for vibration isolation |
| Standard Accessories | 1× substrate holder set, 1× liquid reservoir cup, 3× withdrawal wires |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | PTL-UMB01 |
| Pricing | Upon Request |
| Power Supply | AC 220 V, 50 Hz |
| Max. Sample Size | 200 × 150 × 5 mm |
| Travel Range | 220 mm |
| Dip Speed Range | 1–8000 µm/s (Resolution: 1 µm) |
| Temperature Control | RT–50 °C |
| Immersion/Drying Time | 1–999 s |
| Cycles | 1–20 |
| Load Capacity | ≤1000 g |
| Dimensions (W×D×H) | 480 × 480 × 880 mm |
| Weight | 60 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | QS-Series Microwave Atmosphere Experimental Furnace |
| Pricing | Upon Request |
| Voltage | 220±10 V, 50 Hz, Three-Phase |
| Rated Power | 4 kW (QS1512) / 6 kW (QS1516) |
| Microwave Output Power | 0.01–1.40 kW (Continuously Adjustable) |
| Microwave Frequency | 2.45 GHz |
| Max Operating Temperature | ≤1200 °C (QS1512) / ≤1600 °C (QS1516) |
| Heating Chamber Dimensions | 140×140×70 mm (QS1512) / 110×110×70 mm (QS1516) |
| Temperature Measurement | Type S or K Thermocouple |
| Temp Range & Accuracy | 0–1300 °C ±0.1% RDG (QS1512) / 0–1600 °C ±0.1% RDG (QS1516) |
| Static Ultimate Vacuum | ≤100 Pa |
| Atmosphere Control | Dual-channel gas inlet with rapid pre-vacuum capability |
| Control System | Mitsubishi PLC + Schneider HMI touchscreen |
| Programmable Stages | 40-segment ramp-soak profiles with data logging, export (CSV), real-time curve display, and dynamic screen-saver mode |
| Microwave Leakage | <0.05 mW/cm² |
| Safety Interlocks | Door-closed sensing switch, overtemperature protection, overcurrent protection, magnetron thermal cutoff |
| Cooling | External recirculating chiller (2 m³/h flow rate, 1.6 kW cooling capacity) |
| Overall Dimensions | 1150×850×800 mm (L×W×H) |
| Brand | KJ GROUP |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | RC-Ti-100 |
| Pricing | Upon Request |
| Material | 99.95% Pure Titanium (Grade 2) |
| Outer Diameter | 55 mm |
| Inner Diameter | 45 mm |
| Height | 75 mm |
| Internal Volume | 100 mL |
| Operating Temperature Range | Ambient to 400 °C |
| Maximum Working Pressure | 4 MPa |
| Valve | 1/4″ Stainless Steel Needle Valve |
| Optional Accessories | 1/4″ Dual-Ferrule External Thread Fitting |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | RF-100-LD |
| Input Voltage | AC 110–240 V, 50/60 Hz |
| Output Power Range | 5–100 W (adjustable), stability ±1% |
| RF Frequency | 13.56 MHz, stability ±0.005% |
| Matching Method | Manual impedance matching |
| Cooling | Air-cooled |
| Noise Level | <50 dB(A) |
| Dimensions | 390 × 260 × 105 mm |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | RF-300I-LD |
| Input Voltage | AC 110–240 V, 50/60 Hz |
| Output Power Range | 5–300 W (adjustable, ±1% stability) |
| RF Frequency | 13.56 MHz (±0.005% stability) |
| Matching Method | Automatic impedance matching via air-variable capacitor |
| Cooling | Forced-air cooling |
| Noise Level | <50 dB(A) |
| Dimensions | 480 × 400 × 140 mm |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | RH50-32 |
| Pricing | Upon Request |
| Air Supply | 0.6–0.8 MPa |
| Dimensions (Main Unit) | 720 mm (W) × 700 mm (D) × 550 mm (H) |
| Control Box Dimensions | 480 mm (W) × 460 mm (D) × 220 mm (H) |
| Weight | 100 kg |
| Power Supply | 220 V AC, 50/60 Hz, Single-Phase |