Petroleum Specialized Analytical Instruments
Filter
Showing 211–240 of 1348 results
| Origin | Israel |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | EyeCGas™ |
| Pricing | Upon Request |
| Origin | Norway |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | F-100 |
| Pricing | Upon Request |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 000-001-305 |
| Test Method Compliance | ASTM D2670, D2625, D3233, D5620 |
| Load Range | 200–3000 lbf (±2% FS) |
| Rotational Speed | 290 ± 10 rpm |
| Torque Measurement | 0–100 in-lb (±2% FS) |
| Wear Resolution | 0.001 inch (0.025 mm) per 14.4 ratchet clicks |
| Operating Temperature | Ambient to 100 °C |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 001-001-331 |
| Test Type | Friction and Wear |
| Load Capacity (Standard) | 805 lbf |
| Load Capacity (Optional) | 1300 lbf |
| Speed Range | Programmable RPM Control |
| Temperature Range (Standard Chamber) | Ambient to 200 °C |
| Temperature Range (Pressurized Chamber, Optional) | Ambient to 250 °C |
| Sub-ambient Testing | Available with External Chiller |
| Friction Force Measurement Range (Standard) | 0–250 lbf |
| Friction Force Measurement Range (Optional Low-Load Sensor) | 0–25 lbf |
| Compliant Standards | ASTM D2714, D2981, D3704, D2509, D2782, G77 |
| Test Geometries | Block-on-Ring, Conforming Block-on-Ring, Timken Canted Cylinder, Chip-on-Ring, Ball-on-Ring |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 006‐001‐330 |
| Testing Type | Friction and Wear |
| Compliance | ASTM D3702, D2266, D4172, D5183, G99 |
| Speed Range | 30–3600 rpm (standard), 0.01–10,000 rpm (with optional gear reducer) |
| Load Range | 1–160 lbf (2:1 lever), 20–800 lbf (10:1 lever) |
| Temperature Range | Ambient to 150°C (standard), 30–200°C (with optional heating/cooling modules) |
| Control | Computer-controlled servo motor, pneumatic auto-loading (programmable), real-time torque & displacement monitoring |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 016-001-002 |
| Test Method Compliance | ASTM D3336, SH/T 0428 |
| Maximum Rotational Speed | 20,000 rpm (light-load condition) |
| Axial Load Capacity | 15 lbs (mechanically applied) |
| Heating Chamber Max Temperature | 371 °C |
| Torque Measurement | Digital display with high/low torque shutdown threshold |
| Drive Motor | Dual 1 HP, single-phase AC motors with thermal protection |
| Timing Control | Digital on/off elapsed-time counter |
| Standard Shaft | CRC-type shaft |
| Application Focus | Grease-lubricated ball bearing life evaluation under accelerated thermal–mechanical stress |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 081-001-005 |
| Test Principle | Oscillating Ball-on-Cylinder Tribometry |
| Applied Load | 2450 N (550 lbf) |
| Test Duration | 22 h |
| Oscillation Frequency | 30.0 Hz (1800 cpm) |
| Compliance Standards | ASTM D4170, SH/T 0716 |
| Optional Feature | Load Uniformity Adjustment System |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 089-001-001 |
| Testing Mode | Wear, Extreme Pressure (EP), and KRL Rolling Fatigue |
| Speed Range | 1–2500 rpm |
| Load Range | 1–1000 kg (standard) |
| optional low-load system | 0–150 ±0.2 kg |
| Compliance | ASTM D2266, D4172, D5183, D2596, D2783 |
| Safety | Interlocked pneumatic loading enclosure |
| Control | Touchscreen interface with programmable cycle counter and elapsed time timer |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 450-001-002 |
| Heating Tube Temperature Range | 300–450 °C |
| Temperature Control Accuracy | ±2 °C |
| Flow Rate Range | 0.55–10.0 mL/min |
| Pressure Range | 0–200 psi |
| Test Duration | 2.5–500 hours |
| Sample Reservoir Temperature | 100–210 °C |
| Sample Volume | 100 mL–1 L |
| Compliance | SAE ARP 5996B, SAE AS5780 |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | FAL400 |
| Compliance | ASTM D3241, IP 323, GB/T 9169 |
| Heating Tube Certification | ASTM D3241 Table 2 Note c, IP 323 Table A.1 |
| Automation | Fully automated air purge (1.5 L/min), pre-test pump priming (60 s), flow verification at start/end |
| Pump System | Dual HPLC-grade precision pumps, pulse-free flow delivery |
| Control System | Embedded microprocessor (non-Windows), corrosion-resistant color touchscreen |
| Safety | Interlocked safety shield with real-time alarm |
| Filtration | Integrated activated carbon fume scrubber |
| Optional Accessory | FAL430 Deposit Rating Ellipsometer (ellipsometric thickness & 3D topography measurement) |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 002‐001‐003 |
| Testing Principle | Timken EP Test (ASTM D2509, ASTM D2782, SH/T 0203) |
| Maximum Applied Load | 92,300 psi (on 0.022 in. wide Timken test block) |
| Rotational Speed | 800 rpm ± 5 rpm (adjustable up to 850 rpm) |
| Test Duration | 10 min ± 15 s |
| Temperature Control Range | Ambient to 120 °C (digital PID controller with fluid circulation system) |
| Oil Reservoir Capacity | 3 L (heated, pumped, valve-controlled |
| Grease Auto-Feeder Rate | 45 ± 9 g/min |
| Drive Motor | 2 HP, unidirectional, with RPM display |
| Load Application | Static load via 10:1 lever arm |
| Sample Types | Liquid lubricants and greases |
| Compliance | ASTM D2509, ASTM D2782, SH/T 0203 |
| Brand | FuLand / csfriend |
|---|---|
| Origin | Hunan, China |
| Model | Compliant with GB/T 5096 |
| Temperature Range | Ambient to 150 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Heating Power | 1200 W |
| Display | LCD (English/Chinese) |
| Test Stations | 6 |
| Diagnostic Function | Built-in Self-Diagnosis & Auto-Tuning Capability |
| Oxygen Bomb Storage Compartment | Integrated |
| Brand | CSFriend |
|---|---|
| Origin | Hunan, China |
| Model | FDR-2601 |
| Temperature Control | 60 ± 1 °C |
| Measurement Principle | Potentiometric Titration |
| pH Range | 0.00–14.00 pH |
| mV Range | −1800.0 to +1800.0 mV |
| Temperature Range | −5.0 to 105.0 °C |
| pH Resolution | 0.01 pH |
| mV Resolution | 0.1 mV |
| Temperature Resolution | 0.1 °C |
| pH Accuracy | ±0.01 pH ± 1 digit |
| mV Accuracy | ±0.03 % FS |
| Temperature Accuracy | ±0.3 °C ± 1 digit |
| Burette Capacity Tolerance | ±0.025 mL (10 mL), ±0.035 mL (20 mL) |
| Burette Resolution | 1/10000 (10 mL), 2/10000 (20 mL) |
| Titration Repeatability | 0.2 % |
| Endpoint Detection Sensitivity | ±2 mV |
| Drift Stability | (±0.3 mV ± 1 digit) / 3 h |
| Power Supply | AC 220 ± 22 V, 50 ± 1 Hz |
| Dimensions (W×D×H) | 340 × 400 × 400 mm |
| Weight | 10 kg |
| Brand | CSFriend / Fuland |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | FDR-2801 |
| Vacuum Degree | 80 kPa |
| Filtration Method | Vacuum-assisted suction |
| Power Consumption | 500 W |
| Power Supply | AC 220 V / 50 Hz |
| Timer | Digital display with audible alarm |
| Noise Level | Low-noise vacuum pump |
| Construction | Stainless steel chassis with ceramic-coated control panel |
| Clamping Mechanism | Precision die-stamped metal clamps |
| Glassware Set | ASTM-compliant standard filtration glassware |
| Configuration | Single-station benchtop filtration system |
| Brand | FDR (csfriend) |
|---|---|
| Origin | Hunan, China |
| Model | FDR-4781 |
| Compliance | EN 14112 |
| Temperature Range | Ambient to 150 °C (±0.1 °C) |
| Air Flow Control | Imported Low-Noise Pump |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Brand | CSFriend |
|---|---|
| Origin | Hunan, China |
| Model | FDT-0292 |
| Test Method | Closed-Cup (Pensky-Martens) |
| Operation Mode | Fully Automatic |
| Compliant Standards | GB/T 261, ASTM D93, ISO 2719 |
| Repeatability | ±1 °C |
| Ignition Methods | Electric Spark & Gas Flame |
| Temperature Range | 10–45 °C (ambient operating) |
| Measurement Range | Room Temperature to 300 °C |
| Resolution | 0.1 °C |
| Heating Rate | 5–6 °C/min (Method A), 1–1.5 °C/min (Method B) |
| Stirring Speed | 90–120 r/min (Method A), 250±10 r/min (Method B) |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Max. Power Consumption | 500 W |
| Relative Humidity Limit | <85% RH |
| Safety Features | Over-Temperature Protection, Self-Diagnostic System, Pressure-Limited Platinum Wire Heating Control |
| Brand | CSFriend |
|---|---|
| Origin | Hunan, China |
| Model | FDT-0304 |
| Temperature Range | Ambient to –70 °C (customizable) |
| Compliant Standard | GB/T 510 |
| Cooling System | Imported Refrigeration Compressor |
| Control Accuracy | ±0.5 °C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Max Power Consumption | ≤1000 W |
| Operating Environment | ≤30 °C, RH ≤85% |
| Display | LCD with Bilingual (Chinese/English) Interface |
| Timing & Alert | Automated Timing and Audible/Visual Alerts |
| Temperature Calibration | Built-in Offset Correction and Calibration Functionality |
| Brand | FuLand / csfriend |
|---|---|
| Measurement Range | 2–100 mN/m (for insulating oils) |
| Sensitivity | 0.1 mN/m |
| Repeatability | ±0.3% |
| Accuracy | ±0.1 mN/m |
| Resolution | 0.1 mN/m |
| Power Consumption | 20 VA |
| Operating Temperature | 10–30 °C (typical at 25 °C) |
| Relative Humidity | 20–75 %RH |
| Supply Voltage | AC 220 V ±5%, 50 Hz |
| Net Weight | 15 kg |
| Microcontroller Architecture | High-Capacity Embedded MCU |
| Display | Full-Color LCD Touchscreen Interface |
| Data Handling | Auto-calibration via multi-point linear regression (mg = f(Δ-result)), real-time clock, non-volatile memory backup, auto-lift mechanism, integrated thermal printer |
| Brand | Ayalytical |
|---|---|
| Model | FeDDI |
| Origin | USA |
| Type | Automated Image-Based Corrosion Quantification Instrument |
| Compliance | ASTM D665, GB/T 11143, NACE TM-0172 |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | FYH-M |
| Pricing | Available Upon Request |
| Brand | Kittiwake |
|---|---|
| Origin | United Kingdom |
| Model | FG-K30258-KW |
| Measurement Range | 0–2500 ppm |
| Sample Vessel | Standard 5 mL Test Tube |
| Analysis Time | <3 seconds |
| Portability | Field- and Lab-Deployable |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | FieldLab 58C |
| Product Type | Portable Instrument |
| Detection Modules | XRF Elemental Analysis |
| Test Time per Sample | <10 minutes |
| Sample Volume Required | 12 mL |
| Compliance | ASTM D6595, D7690, D7883, D445 |
| Interface | Touchscreen with Embedded Diagnostic Software |
| Power | Rechargeable Battery |
| Enclosure | Ruggedized Transport Case Integrating All Four Modules |
| Brand | FlameTech (csfriend) |
|---|---|
| Origin | Hunan, China |
| Model | FDT-0101 |
| Test Method | Cleveland Open-Cup (COC) |
| Temperature Range | –6 °C to 400 °C |
| Compliance Standard | GB/T 3536 |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Heating Power | 0–600 W, continuously adjustable |
| Ignition Source | Liquefied petroleum gas (LPG) or natural gas |
| Flame Tip Orifice Diameter | 0.6–0.8 mm |
| Thermometer Range & Accuracy | –6 °C to 400 °C, graduation 2 °C, compliant with GB/T 514 |
| Sweep Mechanism | Motor-driven automatic test flame sweep |
| Enclosure Material | Stainless steel work surface and furnace housing |
| Max. Power Consumption | ≤650 W |
| Operating Ambient | –10 °C to 50 °C, RH ≤85% |
| Safety Features | Integrated flame-extinguishing lid for fire point determination |
| Construction | Benchtop, explosion-resistant quartz-tube heating furnace |
| Brand | FlanD / csfriend |
|---|---|
| Origin | Hunan, China |
| Model | FDH-1502 |
| Applicable Standards | GB/T 9171, ASTM D4684, SH/T 0562 |
| Temperature Range | –50 °C to +80 °C |
| Sample Capacity | 9-position test block |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Cooling System | Imported compressor-based refrigeration unit |
| Detection Method | Optical encoder-based rotor speed measurement |
| Control Interface | Touchscreen with bilingual (English/Chinese) OS |
| Software | FLD proprietary BPT analysis software with real-time timing, auto-diagnosis, and single-point calibration capability |
| Optional Feature | Integrated nitrogen purge port |
| Design | Integrated monolithic chassis |
| Brand | FlanD / csfriend |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FDH-2801 |
| Pricing | Upon Request |
| Standard Compliance | ISO 9950, JB/T 7951, SH/T 0220 |
| Temperature Range | 0–900 °C |
| Sampling Rate | 260 Hz |
| Probe Material | Inconel 600 (Ni–Cr–Fe alloy) |
| Probe Dimensions | Ø12.5 mm × 60 mm |
| Data Output | Dual-curve display (cooling curve + cooling rate curve), 5-group comparative analysis |
| Interface | USB, RS-232, LIMS-compatible |
| Control System | Integrated FlanD Automatic Control Module |
| Software Environment | Windows XP and later (32-bit) |
| Data Management | Folder-based archival with auto-timestamped files (date/time embedded in metadata) |
| Correction | User-configurable probe correction coefficient (based on peak cooling rate or full-curve fitting) |
| Reporting | A4/B5 formatted printouts including cooling parameters (e.g., time to 700 °C, 300 °C |
| Brand | Fland |
|---|---|
| Origin | Hunan, China |
| Model | FDR-0271 |
| Analysis Method | ASTM D323 (Reid Method) |
| Pressure Range | 0–200 kPa (0–29 psi) |
| Temperature Control | 37.8 ± 0.1 °C |
| Sample Capacity | 3 bomb units |
| Power Consumption | 1.5 kW |
| Compliance | ASTM D323, IP 121, GB/T 8017, ISO 3016 |
| Brand | Fland (csfriend) |
|---|---|
| Model | FDR-0571 |
| Standard Compliance | GB/T 8019 |
| Temperature Range | Ambient to 200 °C |
| Temperature Resolution | 0.01 °C |
| Display | 7-inch Touchscreen (Chinese/English Optional) |
| Weighing Precision | 0.0001 g (Integrated METTLER Toledo Analytical Balance) |
| Power Supply | 220 V, 50 Hz |
| Data Export Interface | Optional RS232/USB for LIMS Integration |
| Brand | Fland (csfriend) |
|---|---|
| Origin | Hunan, China |
| Model | FDR-0871 |
| Temperature Range | 0–400 °C |
| Temperature Accuracy | ±0.1 °C |
| Cold Bath Range | −10 to 80 °C |
| Distillation Rate | 4–5 mL/min |
| Volume Measurement Range | 1–100 mL |
| Volume Resolution | 0.1 mL |
| Heating Power | 2 kW |
| Refrigeration Power | 1 kW |
| Refrigeration Control Accuracy | ±1 °C |
| Steam Temperature Sensor Range | 0–400 °C |
| Furnace Temperature Sensor Range | 0–500 °C |
| Refrigeration Sensor Range | 0–100 °C |
| Brand | Fland (csfriend) |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | FDR-4291 |
| Pricing | Available Upon Request |
| Measurement Principle | Dual-channel NDIR (Non-Dispersive Infrared) Spectroscopy |
| Gas Components Measured | CH₄ (0–100% vol), CnHm (0–10% vol) |
| Resolution | 0.01% for both CH₄ and CnHm |
| Accuracy | ±1% FS for both channels |
| Zero Calibration | Automatic via integrated sampling pump |
| Display | 320 × 240 graphical LCD |
| Output Interface | RS232 digital serial port |
| Brand | Fland / csfriend |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | FDS-0411 |
| Power Consumption | 1000 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Temperature Control | Digital PID Controller with Auto-Tuning |
| Gas Flow Regulation | Adjustable Needle Valve with Precision Flowmeter |
| Heating Method | Immersed Electric Heating Element |
| Compliant Standards | ASTM D2420, SH/T 0125 |