Polishing and Grinding Machine
Filter
Showing 61–90 of 178 results
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | UNIPOL-2001 |
| Dimensions (L×W×D) | 820 × 1180 × 945 mm |
| Number of Grinding/Polishing Stations | 3 |
| Platen Diameter | φ508 mm (20 in) |
| Platen Speed | 10–90 rpm |
| Carrier Block Diameter | φ160 mm (6 in) |
| Carrier Block Thickness | 36 mm |
| Arm Oscillation Frequency | 5.5–13.5 cycles/min (15–30 adjustable steps) |
| Motor | 1.5 kW Variable-Frequency Drive (220 V) |
| Total Power Consumption | 1.7 kW (220 V) |
| Weight | 450 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | UNIPOL-300 |
| Dimensions (L×W×D) | 400 mm × 200 mm × 230 mm |
| Grinding Plate Count | 1 |
| Grinding Plate Diameter | 70 mm |
| Rotational Speed | 0–160 rpm |
| Sample Holder Diameter | 30 mm |
| Maximum Sample Diameter | 30 mm |
| Maximum Sample Thickness | 2 mm |
| Pressure Range (adjustable) | 0.55–1.05 kg (5.4–10.3 N) |
| Oscillation Frequency of Sample Holder | 0–280 cycles/min |
| Motor | DC 24 V, 10 W, 50 rpm nominal |
| Power Input | DC 24 V, 2.5 A |
| Total Power Consumption | 25 W |
| Operating Temperature | 0–45 °C |
| Relative Humidity | 10–85 % RH (non-condensing at 25 °C) |
| Weight | 11 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | UNIPOL-800M |
| Dimensions (L×W×D) | 580 mm × 420 mm × 630 mm |
| Number of Grinding/Polishing Plates | 1 |
| Plate Diameter | 203 mm |
| Lower Plate Speed | 0–400 rpm |
| Upper Carrier Plate Speed | 1–60 rpm |
| Carrier Plate Diameter (Standard) | Ø110 mm |
| Gravity Carrier Plate Diameter | Ø80 mm |
| Sample Holder Capacity | Ø25 mm & Ø30 mm |
| Timer Range | 0–300 h |
| Operating Environment | ≤1000 m altitude, 10–40 °C ambient, 45–65 %RH |
| Power Supply | AC 220 V, 50 Hz |
| Water Interface | Inlet & Drain Required |
| Ventilation | Mandatory |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | UNIPOL-802 |
| Dimensions (L×W×D) | 580 mm × 420 mm × 350 mm |
| Number of Platters | 1 |
| Platter Diameter | Ø203 mm |
| Speed Range | 0–250 rpm |
| Spindle Runout | ≤0.008 mm / 180 mm |
| Workstation Count | 2 |
| Carrier Arm Oscillation Frequency | 0–9 cycles/min |
| Carrier Disk Diameter | Ø80 mm |
| Power Supply | AC 220 V, 50 Hz |
| Power Consumption | 275 W |
| Operating Temperature | 10–40 °C |
| Relative Humidity | 45–65 % RH |
| Weight | 68 kg |
| Timer Range | 0–300 h |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | UNIPOL-810 |
| Dimensions (L×W×D) | 500 mm × 440 mm × 550 mm |
| Number of Grinding/Polishing Plates | 1 |
| Plate Diameter | Ø203 mm |
| Rotational Speed Range | 20–600 rpm (infinitely variable, digital display) |
| Power Supply | AC 110/220 V, 50/60 Hz |
| Total Power Consumption | 175 W |
| Net Weight | ≈35 kg |
| Operating Temperature | 0–45 °C |
| Relative Humidity | 10–85 % RH (non-condensing at 25 °C) |
| Sample Holder Type | Peach-shaped aperture carrier plate (Ø80 mm, 3×Ø26 mm apertures) and flat carrier plate (Ø80 mm) |
| Drip Reservoir Capacity | 1 L |
| Motor | DC 110 V, 165 W |
| Cooling | Tap water inlet/outlet ports provided |
| Mounting Requirement | Stable bench with ≥100 kg load capacity and proper grounding |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | UNIPOL-820 |
| Dimensions (L×W×D) | 720 mm × 530 mm × 350 mm |
| Number of Grinding/Polishing Plates | 2 |
| Plate Diameter | Ø203 mm |
| Speed Range | 50–600 rpm |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | UNIPOL-830 |
| Dimensions (L×W×D) | 580 mm × 420 mm × 350 mm |
| Number of Platen Stations | 1 |
| Platen Diameter | Ø203 mm |
| Speed Range | 50–600 rpm |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer | LECO Corporation |
| Type | Imported Equipment |
| Model | PX500 |
| Dimensions (L×W×D) | 635 mm × 533 mm × 711 mm |
| Number of Platen Stations | 1 |
| Platen Diameter Options | 10 in, 12 in, 250 mm, 300 mm |
| Speed Range | 0–600 rpm (adjustable in 25-rpm increments) |
| Fluid Dispensing | Programmable 5-channel reagent metering system for polishing slurries and abrasives |
| Control Interface | Capacitive touchscreen with icon-based navigation |
| Safety | Dedicated emergency stop button located directly below display |
| Base Design | Helical bowl-shaped base with integrated self-cleaning mechanism |
| Sample Holder Motion | Programmable slow-rotation mode for safe mounting/dismounting of mounted specimens |
| Brand | LEI-TECH |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LK-M-1 Pro+ |
| Number of Grinding/Polishing Plates | 1 |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 0.75 kW |
| Plate Diameter | φ203 mm |
| Rotational Speed Range | 0–1400 rpm (infinitely variable via knob) |
| Preset Speeds | 150 / 300 / 700 / 1400 rpm |
| Rotation Direction | Reversible (clockwise or counterclockwise) |
| Sample Force Measurement Range | 0–60 N |
| Dimensions (W×D×H) | 400 × 622 × 295 mm |
| Net Weight | 22 kg |
| Brand | LEI-TECH |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LK-MP200 |
| Grinding Plate Count | 1 |
| Plate Diameter | 203 mm |
| Speed Range | 0–1400 rpm (infinitely variable via knob) |
| Preset Speeds | 150, 300, 600, 1000 rpm |
| Rotation Direction | Reversible (CW/CCW) |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 0.75 kW |
| Dimensions (W×D×H) | 594 × 795 × 310 mm |
| Net Weight | 40 kg |
| Cooling | Integrated water-cooling system |
| Brand | LEI-TECH |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LK-MP200E |
| Number of Grinding/Polishing Plates | 2 |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 0.75 kW |
| Platen Diameter | 203 mm |
| Speed Range | 0–1400 rpm (infinitely variable via knob) |
| Preset Speeds | 150, 300, 600, 1000 rpm |
| Rotation Direction | Reversible (CW/CCW selectable) |
| Dimensions (W×D×H) | 758 × 785 × 310 mm |
| Net Weight | 40 kg |
| Cooling System | Integrated water-cooling circuit |
| Brand | JinJunPai |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | microcut |
| Pricing | Upon Request |
| Brand | WEIYEE |
|---|---|
| Origin | Guangdong, China |
| Model | MP-1DCH |
| Grinding Disc Diameter | 200 mm (8") |
| Number of Grinding Discs | 1 |
| Speed Range (Disc) | 50–1500 rpm, infinitely variable |
| Rotation Direction | Forward/Reverse selectable |
| Polishing Head Speed | 20–120 rpm, infinitely variable |
| Sample Capacity | Up to 4 specimens simultaneously |
| Power Supply | AC 220 V |
| Housing Material | Reinforced plastic-steel composite |
| Brand | WEIYEE |
|---|---|
| Origin | Guangdong, China |
| Model | MP-1DSH |
| Disc Diameter | 200 mm (8") |
| Number of Grinding/Polishing Discs | 1 |
| Speed Range (Disc) | 50–1500 rpm, infinitely variable |
| Rotation Direction | Forward/Reverse selectable |
| Head Speed (Sample Holder) | 20–120 rpm, infinitely variable |
| Power Supply | 220 V AC |
| Housing Material | Reinforced Plastic-Steel Composite |
| Brand | WEIYEE |
|---|---|
| Origin | Guangdong, China |
| Model | MP-1ZS |
| Platen Diameter | 250 mm (10") |
| Number of Platens | 1 |
| Speed Range (Platen) | 50–1500 rpm (infinitely variable) + 6 preset speeds (250/500/750/1000/1250/1500 rpm) |
| Speed Range (Head) | 20–120 rpm (infinitely variable) |
| Rotation | Bidirectional (forward/reverse) |
| Pressure Control | Pneumatic single-point loading with adjustable pressure |
| Display | 9" high-resolution touchscreen interface |
| Sample Capacity | Up to 8 specimens simultaneously |
| Drive Motor | Panasonic servo motor with electric vertical lift |
| Startup Profile | Programmable soft-start curve |
| Housing Material | 304 stainless steel |
| Liquid Dispensing | Dual-channel integrated reagent dispensing bottles |
| Power Supply | 220 V AC |
| Brand | WEIYEE |
|---|---|
| Origin | Guangdong, China |
| Model | MP-2DCH |
| Disk Diameter | 200 mm (8") |
| Number of Disks | 2 |
| Speed Range (Disk) | 50–1500 rpm, infinitely variable |
| Rotation Direction | Forward/Reverse selectable |
| Polishing Head Speed | 20–120 rpm, infinitely variable |
| Power Supply | 220 V AC |
| Sample Capacity | Up to 4 specimens simultaneously |
| Pressure Control | Adjustable mechanical load system |
| Housing Material | Reinforced plastic-steel composite |
| Brand | Narishige |
|---|---|
| Model | MF-900 |
| Origin | Japan |
| Power Input | AC 100–240 V (±5%), 50/60 Hz |
| Power Consumption | ~35 W |
| Microscope Magnification | 50× / 100× (10× eyepiece, 5× & 10× objectives) |
| Capillary Diameter | Ø1 mm |
| Manipulator Travel Range (Heater) | X/Y/Z ±14 mm |
| Manipulator Travel Range (Pipette) | X ±12 mm, Z ±28 mm |
| Microscope Stage Travel | X ≈7 mm, Y 30 mm, Z ≈8 mm |
| Accessories | Foot switch, dedicated pipette holder, Allen wrench, spare heater, spare lamp, silicone rubber gasket |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MTK-AC |
| Dimensions (L×W×D) | 10 mm × 10 mm × 4 mm |
| Weight | Approx. 3 g |
| Compatible Injection Holders | ø4 mm (e.g., HI-7, HI-9) |
| Mounting | Magnetic or mechanical clamp |
| Material | Stainless steel |
| Quantity per package | 2 pcs |
| Brand | PRESI |
|---|---|
| Origin | France |
| Model | MECATECH 250 SPC |
| Dimensions (L×W×D) | 665 × 510 × 810 mm |
| Number of Platen Stations | 1 |
| Platen Diameter | 200–250 mm |
| Rotational Speed Range | 20–700 rpm |
| Motor Power | 750 W |
| Control Interface | 7-inch LCD touchscreen |
| Integrated Peristaltic Pump | Yes, 200 mL dispenser |
| Connectivity | USB + optional Ethernet module |
| Safety Compliance | CE, EN 61000-6-2/6-4, EN ISO 12100 |
| Brand | PRESI |
|---|---|
| Origin | France |
| Model | MECATECH 250 SPI |
| Dimensions (L×W×D) | 665 × 510 × 810 mm |
| Number of Platen Stations | 1 |
| Platen Diameter | 250 mm |
| Rotational Speed Range | 20–700 rpm |
| Motor Power | 750 W |
| Control Interface | 7-inch LCD touchscreen |
| Fluid Delivery | Integrated peristaltic pump with 200 mL dispenser |
| Connectivity | USB + optional Ethernet module |
| Safety Compliance | CE, EN 61000-6-2/6-4, EN ISO 12100 |
| Brand | PRESI |
|---|---|
| Origin | France |
| Model | MECATECH 300 SPC |
| Dimensions (L×W×D) | 665 × 510 × 810 mm |
| Platen Count | 1 |
| Platen Diameter | 250–300 mm |
| Rotational Speed Range | 20–700 rpm |
| Motor Power | 1500 W |
| Control Interface | 7-inch LCD touchscreen |
| Sample Capacity | 6–8 specimens per cycle |
| Fluid Delivery | Integrated peristaltic pump (200 mL dispenser) with programmable dosing |
| Connectivity | USB + optional Ethernet module |
| Safety Compliance | CE, EN 61000-6-2/6-4, EN ISO 12100 |
| Brand | PRESI |
|---|---|
| Origin | France |
| Model | MINITECH 250 DP1 |
| Disc Quantity | 2 |
| Disc Diameter | Ø200 mm or Ø250 mm |
| Speed Range | 20–700 rpm |
| Motor Power | 750 W |
| Dimensions (L×W×D) | 920 × 735 × 330 mm |
| Control Interface | 7-inch color LCD touchscreen |
| Rotation Direction | Clockwise or counterclockwise |
| Timing Mode | Forward or reverse countdown |
| Load Monitoring | Real-time manual pressure feedback display |
| Safety Features | Dual emergency stop buttons, splash guard, inclined base with elevated spindle housing |
| Accessories | Removable polymer support bowl, disc drying function |
| Brand | PRESI |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Equipment |
| Model | MINITECH 250 DP2 |
| Dimensions (L×W×D) | 920 × 735 × 330 mm |
| Number of Grinding/Polishing Plates | 2 |
| Plate Diameter Options | Ø200 mm or Ø250 mm |
| Speed Range | 20–700 rpm |
| Motor Power | 2 × 750 W |
| Drive Configuration | Independent Dual-Motor |
| Rotation Direction | Clockwise or Counterclockwise |
| Timing Mode | Forward or Reverse Countdown |
| Display Interface | 7-inch Color LCD Touchscreen |
| Load Monitoring | Real-time Manual Force Feedback Display |
| Safety Features | Dual Emergency Stop Buttons, Splash Guard Ring, Tilted Base for Drainage, Elevated Spindle Housing |
| Accessories | Removable Polymer Sample Bowl, Plate Drying Function |
| Brand | PRESI |
|---|---|
| Origin | France |
| Model | MINITECH 250 SP1 |
| Disc Diameter | Ø200 mm or Ø250 mm |
| Speed Range | 20–700 rpm |
| Motor Power | 750 W |
| Dimensions (L×W×D) | 510 × 810 × 330 mm |
| Disc Quantity | 1 |
| Rotation Direction | Clockwise or Counterclockwise |
| Timing Mode | Forward/Reverse Countdown |
| Display | 7-inch color LCD touchscreen |
| Pressure Feedback | Real-time manual load indication |
| Safety | Dual emergency stop buttons, IP-rated enclosure, splash guard, tilted base with drainage |
| Brand | PRESI |
|---|---|
| Origin | France |
| Model | MINITECH 300 DP1 |
| Disc Quantity | 2 |
| Disc Diameter | 250–300 mm |
| Speed Range | 20–700 rpm |
| Dimensions (L×W×D) | 330 × 620 × 875 mm |
| Motor Power | 900 W |
| Display | 7-inch color LCD touchscreen |
| Compliance | CE, EN 61000-6-2/-6-4, EN ISO 12100 |
| Brand | PRESI |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MINITECH 300 DP2 |
| Dimensions (L×W×D) | 1100 × 810 × 330 mm |
| Number of Grinding/Polishing Plates | 2 |
| Plate Diameter | Ø 250 mm or Ø 300 mm |
| Speed Range | 20–700 rpm |
| Motor Power | 900 W × 2 |
| Display | 7-inch color LCD touchscreen |
| Real-time load feedback | Yes |
| Safety | Dual emergency stop buttons, IP-rated enclosure design, splash guard integrated |
| Base | Tilted drainage base with elevated spindle bearing housing |
| Sample Holder Bowl | Removable polymer bowl with corrosion resistance |
| Spin-dry function | Yes |
| Brand | PRESI |
|---|---|
| Origin | France |
| Model | MINITECH 300 SP1 |
| Motor Power | 900 W |
| Disc Diameter Options | Ø250 mm or Ø300 mm |
| Speed Range | 20–700 rpm |
| Dimensions (L×W×D) | 620 × 875 × 330 mm |
| Number of Grinding/Polishing Discs | 1 |
| Display | 7-inch color LCD touchscreen |
| Real-time load feedback | Yes |
| Safety | Dual emergency stop buttons |
| Base design | Tilted chassis with splash ring and elevated spindle bearing housing |
| Sample holder bowl | Removable polymer bowl, corrosion-resistant and cleanable |
| Spin-dry function | Yes |
| Software | Password-protected parameter management with user-level access control |
| Brand | PRESI |
|---|---|
| Origin | France |
| Model | VIBROTECH 300 |
| Power | 519 W |
| Bowl Diameter | 305 mm |
| Sample Capacity | 21 pcs per cycle |
| Speed Range | 80–110 rpm |
| Dimensions (L×W×D) | 715 × 554 × 676 mm |
| Display | 7-inch LCD touchscreen with password protection |
| Noise Level | Low operational noise |
| Vibration Damping | Integrated isolation system |
| USB Interface | For process import/export |
| Compliance | CE, RoHS |
| Weight | Approx. 78 kg |
| Brand | QATM |
|---|---|
| Origin | Germany |
| Model | QETCH 1000 |
| Dimensions (L×W×D) | 330 × 220 × 400 mm |
| Weight | ~7 kg |
| Power Supply | 2 kVA |
| Max. Output Voltage | 90 V DC |
| Max. Current | 14 A |
| Polishing Time Range | 1 s – 25 min |
| Etching Time Range | 1 s – 5 min |
| Electrolyte Volume | 1 L (sealed, exchangeable cell) |
| Control Interface | Touchscreen with QATM proprietary software |
| Programmable Methods | Up to 200 user-defined protocols with password protection |
| Real-time Display | Simultaneous current & voltage monitoring |
| Compliance | Designed for fume hood integration |
| Cleaning | Automated water-based rinse cycle |
| Brand | QATM |
|---|---|
| Origin | Germany |
| Model | QETCH 100M |
| Dimensions (L×W×D) | 380 × 355 × 180 mm |
| Max. Power | 160 W |
| Max. Voltage | 90 V DC |
| Max. Current | 2 A |
| Electrolyte Capacity | 1 L |
| Weight | ~8.5 kg (without electrolyte) |
| Operating Mode | Microprocessor-Controlled Automatic Cycle |
| Display | Color LED + LCD (showing real-time voltage, current, elapsed time) |
| Polishing Area | Ø ~9 mm |
| Power Source | Rechargeable Lithium-Ion Battery |