Water Quality Analysis
Filter
Showing 1411–1440 of 3714 results
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-70 |
| Instrument Type | Portable / Handheld Water Quality Analyzer |
| Measurable Parameters | pH, mV (ORP), Ion Concentration, Conductivity, Resistivity, Salinity, Total Dissolved Solids (TDS), Dissolved Oxygen (DO) |
| Display | Backlit LCD with Capacitive Touchscreen |
| Protection Rating | IP67 (Instrument and Electrodes) |
| Data Storage | 1,000 measurement records |
| Power Supply | AAA alkaline batteries, Ni-MH rechargeable batteries, or AC adapter |
| Calibration Support | Auto-calibration prompts, 5-point pH calibration, NIST/USA standard compatibility, automatic temperature compensation (pH, conductivity, DO), pressure & salinity compensation (DO) |
| Compliance | JIS Z 8401 (pH), JIS K 0101 (conductivity), ISO 7888 (conductivity), ASTM D1125 (conductivity), USP <645> (water resistivity for pharmaceutical use) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-71 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measurable Parameters | pH, mV (ORP), Ion Concentration, Conductivity, Resistivity, Salinity, TDS, Dissolved Oxygen (DO), Saturation DO, Oxygen Concentration |
| Display | Backlit Monochrome LCD |
| Protection Rating | IP67 |
| Data Storage | 1000 records |
| Power | 2 × AAA alkaline or Ni-MH batteries (≈1000 h battery life) |
| Dimensions | 67 × 28 × 170 mm (W × D × H) |
| Weight | ~270 g (without batteries) |
| Compliance | Supports GLP/GMP data integrity requirements |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-71 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measurable Parameters | pH, mV (ORP), Conductivity, Resistivity, Salinity, TDS, Dissolved Oxygen (DO), Ion Concentration |
| Display | Backlit LCD with Capacitive Touchscreen |
| Protection Rating | IP67 (Instrument & Electrodes) |
| Data Storage | 1,000 measurements |
| Power Supply | AAA Alkaline/Ni-MH Batteries or AC Adapter |
| Calibration | Auto-calibration support |
| Compliance | JIS Z 8401 (pH), JIS K 0101 (Conductivity), ISO 5667-3, ASTM D1293, ASTM D5391, USP <645>, FDA 21 CFR Part 11 (with optional software module) |
| Connectivity | USB interface for PC connection and printer output |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-71 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measured Parameters | pH, mV (ORP), Ion Concentration, Conductivity, Resistivity, Salinity, Total Dissolved Solids (TDS) |
| IP Rating | IP67 |
| Display | Backlit LCD with Capacitive Touchscreen |
| Data Storage | 1,000 measurement records |
| Power Supply | AAA alkaline batteries, Ni-MH rechargeable batteries, or AC adapter |
| Compliance | JIS Z 8401 (pH), JIS K 0101 (conductivity), NIST-traceable calibration support |
| Calibration | Auto-calibration assist, 5-point pH calibration, automatic range switching & temperature compensation for conductivity, salinity/TDS/resistivity auto-conversion |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-71 |
| Instrument Type | Portable pH Meter |
| pH Range | 0–14 |
| Temperature Range | 0–100 °C |
| IP Rating | IP67 |
| Housing Material | Impact-Resistant Polycarbonate |
| Battery Life | Approx. 1000 hours |
| Data Storage | 1000 measurements |
| Compliance | GLP/GMP-ready (data traceability supported in compatible models |
| Electrode Mounting | Adjustable single-hand electrode holder with 360° rotation |
| Display | Backlit LCD (D-71 model: non-backlit) |
| Cleaning Compatibility | Alcohol, weak acids/bases, oils (chemically inert surface) |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | D-71 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measured Parameter | pH |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-72 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measurable Parameters | pH, ORP (Redox), Conductivity |
| Display | Dual-parameter LCD with backlight |
| Enclosure Rating | IP67 |
| Data Storage | 1,000 measurements |
| Power | ~1000 hours battery life (alkaline) |
| Electrode Mount | Rotatable, single-hand adjustable stand |
| Housing Material | Impact-resistant polycarbonate |
| Compliance | GLP/GMP-compliant data output (with optional printer and software) |
| Connectivity | PC interface via optional USB cable (software available via registered user download) |
| Cleaning Compatibility | Wipeable with ethanol, weak acids/bases, and oils |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-73 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measurable Parameters | pH, mV (ORP), Temperature, Conductivity, Resistivity, Salinity, TDS, Dissolved Oxygen (DO), Ion Concentration |
| Display | Backlit Monochrome LCD |
| Data Storage | 1000 Records |
| Protection Rating | IP67 |
| Power Supply | 2× AAA Alkaline/Ni-MH Batteries or AC Adapter |
| Operating Environment | 0–45 °C, RH 0–80% (non-condensing) |
| Compliance | GLP/GMP-ready, ASTM D1293 (pH), ASTM D5391 (Conductivity), ISO 5814 (DO), USP <643> (TDS), NIST/USA Buffer Recognition |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-73 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measurable Parameters | pH, ORP, Ion Concentration (e.g., Na⁺, K⁺, Ca²⁺, F⁻, Cl⁻), Conductivity (as optional module or via compatible electrodes) |
| Display | Dual-parameter LCD with backlight |
| Data Storage | 1,000 measurement records |
| Environmental Rating | IP67 |
| Power Supply | Approx. 1,000 hours battery life (alkaline batteries) |
| Housing Material | Impact-resistant polycarbonate |
| Compliance | GLP/GMP-compliant data logging and printer output (with optional accessories) |
| Connectivity | PC interface via dedicated USB cable (software available via registered user download) |
| Electrode Mounting | Adjustable rotating electrode stand (desktop use), integrated electrode hook (portable storage) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-74 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measurable Parameters | pH, mV (ORP), Conductivity, Resistivity, Salinity, Total Dissolved Solids (TDS), Temperature |
| Protection Rating | IP67 |
| Display | Backlit Monochrome LCD |
| Data Storage | 1,000 measurements with timestamp, ID, and channel metadata |
| Calibration | Auto-buffer recognition (5-point pH), NIST/USA standard support, automatic temperature compensation (ATC), auto-ranging conductivity |
| Compliance | Designed for GLP/GMP environments with audit-ready data logging (time-stamped, user-ID enabled), meets requirements for ISO 5667-3, ASTM D1293, ASTM D5391, and USP <645> for conductivity validation |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-74 |
| Type | Handheld Water Quality Analyzer |
| Measurable Parameters | pH, ORP, Conductivity |
| Display | Dual-parameter LCD with backlight |
| Enclosure Rating | IP67 |
| Data Storage | 1,000 measurements |
| Power Life | Approx. 1,000 hours |
| Material | Polycarbonate housing |
| Compliance | GLP/GMP-ready data export (via optional USB cable and free software) |
| Connectivity | PC interface supported (D-74 included) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-75 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measured Parameters | pH, Dissolved Oxygen (DO) |
| IP Rating | IP67 |
| Display | Backlit Monochrome LCD |
| Data Storage | 1000 Records |
| Power | 2×AAA Alkaline/Ni-MH Batteries or AC Adapter |
| Operating Temperature | 0–45 °C |
| Relative Humidity | 0–80 % RH (non-condensing) |
| Compliance | GLP/GMP Data Integrity Support, ASTM D888, ISO 5814, ISO 7888, USP <643>, EN 27888 |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | D-75 |
| Instrument Type | Portable/HANDHELD Water Quality Analyzer |
| Measurable Parameters | pH, ORP, Dissolved Oxygen (DO), Conductivity |
| Enclosure Rating | IP67 |
| Display | Backlit LCD (simultaneous dual-parameter display) |
| Data Storage | 1000 measurement records |
| Power Life | Approx. 1000 hours (alkaline batteries) |
| Compliance | GLP/GMP-compliant data output (with optional printer) |
| Connectivity | PC interface via optional USB cable (software available via registered user download) |
| Housing Material | Impact-resistant polycarbonate (2× impact resistance vs. ABS) |
| Cleaning Compatibility | Alcohol-, weak acid/base-, and oil-resistant surface |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model(s) | D71, D72, D73, D74, D75 |
| Instrument Type | Portable / Handheld Water Quality Analyzer |
| Housing Material | Impact-Resistant Polycarbonate |
| IP Rating | IP67 |
| Display | Backlit LCD (D72–D75 only) |
| Data Storage | 1,000 measurements internal memory |
| Connectivity | USB PC interface (D72–D75) |
| Power | ~1000 hours continuous operation (typical) |
| Electrode Mount | Adjustable rotating electrode stand (desktop & handheld use) |
| Dual-Parameter Display | Simultaneous readout of two parameters (D73/D74/D75 only) |
| Cleaning Compatibility | Alcohol-, weak acid/base-, and oil-resistant surface |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | B-700 |
| Instrument Type | Laboratory & Field-Portable Water Quality Analyzer |
| Measurable Parameters | pH, Electrical Conductivity (EC), Na⁺, K⁺, NO₃⁻, Ca²⁺, Salinity (NaCl) |
| Measurement Principle | Glass Electrode (pH), Dual-Electrode AC Conductometry (EC), Ion-Selective Electrode (ISE) |
| Minimum Sample Volume | 0.05–0.3 mL |
| Accuracy | ±0.1 pH |
| IP Rating | IP67 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | <85% RH (non-condensing) |
| Power | Two CR2032 batteries |
| Dimensions | 164 × 29 × 20 mm (L×W×H) |
| Weight | ~50 g (instrument only) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | B-712 |
| Measurement Principle | Glass Electrode Method |
| Sample Volume | ≥0.05 mL (with sampling film B) |
| pH Range | 2.0–12.0 |
| Calibration | One-point or Two-point (user-selectable) |
| Accuracy | ±0.1 pH (after calibration, repeatability in standard buffer) |
| Temperature Compensation | Automatic (ATC) |
| Auto-Hold | Yes |
| Ingress Protection | IP67 (1 m submersion for 30 min |
| Operating Environment | 5–40 °C, ≤85% RH (non-condensing) |
| Power | Two CR2032 batteries |
| Dimensions (L×W×H) | 164 × 29 × 20 mm (excl. protrusions) |
| Weight | ~50 g (instrument only, excl. batteries) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | Ca-11 |
| Instrument Type | Portable Ion Meter |
| Measurement Range | 4–9900 ppm (mg/L) Ca²⁺ |
| Detection Limit | ±1 ppm (0–99 ppm), ±10 ppm (100–990 ppm), ±100 ppm (1000–9900 ppm) |
| Response Time | ≤5 s |
| Accuracy | ±20% of reading |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤85% RH (non-condensing) |
| IP Rating | IP67 |
| Sensor Replaceable | Yes (approx. 1500 measurements per sensor) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | Ca-11C |
| Measurement Principle | Ion-Selective Electrode (ISE) |
| Sample Volume | ≥0.3 mL |
| Measurement Range | 0.1–5.0 mmol/L |
| Resolution | 0.1 mmol/L |
| Accuracy | ±20% of reading |
| Calibration Points | 2-point (1.25 mmol/L and 2.50 mmol/L) |
| Display | Backlit monochrome LCD |
| Operating Temperature | 5–40.0 °C |
| Operating Humidity | ≤85% RH (non-condensing) |
| Power Supply | Two CR2032 batteries |
| Housing Material | ABS epoxy resin |
| Dimensions | 164 × 29 × 20 mm (excluding protrusions) |
| Weight | Approx. 55 g (including sensor and batteries) |
| IP Rating | IP67 |
| Key Functions | Auto-standard recognition, auto-hold/auto-stabilize measurement, auto-power-off (30 min), low-battery indicator, replaceable calcium ISE sensor |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | F-11 |
| Instrument Type | Portable |
| Measurement Range | 0.1 to 990 ppm (mg/L) |
| Accuracy | ±2% of actual value |
| Temperature Range | 0.0 to 50.0 °C |
| Minimum Sample Volume | 0.3 mL (0.01 mL with Sampling Sheet B) |
| Resolution | 0.1 ppm (0.1–9.9 ppm), 1 ppm (10–99 ppm), 10 ppm (100–990 ppm) |
| Calibration Points | 2 (auto-recognized 1 ppm and 10 ppm standards) |
| IP Rating | IP67 |
| Temperature Compensation | Yes |
| Auto-Hold / Auto-Stability Mode | Yes |
| Power Management | Auto-off after 30 min |
| Display | Monochrome backlit LCD |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | ORP-11 |
| Type | Portable ORP/Eh Meter |
| Measurement Range | −1000 to +1000 mV |
| Resolution | 1 mV |
| Accuracy | ±2 mV |
| Minimum Sample Volume | 0.3 mL (0.05 mL with sampling sheet) |
| Temperature Range | 0.0–50.0 °C |
| Temp. Resolution | 0.1 °C |
| IP Rating | IP67 |
| Display | Backlit monochrome digital LCD |
| Power | Two CR2032 batteries (~400 h operation without backlight) |
| Dimensions | 164 × 29 × 20 mm |
| Weight | ~55 g (incl. sensor & batteries) |
| Compliance | CE-marked, RoHS-compliant, designed for GLP-supporting workflows |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | LO-300 |
| Detection Principle | Laser Circular Area Scanning Reflectometry |
| Detection Range | 0.3–4.0 m (up to 6.0 m on still water) |
| Oil Types Detected | Floating hydrocarbon films (gasoline, kerosene, diesel, heavy oil, insulating oil, lubricating oil) |
| Output Signals | 4–20 mA analog (reflected light intensity), 2 dry contact relays (oil film alarm, system fault) |
| Display | Color touchscreen showing oil coverage (%), received light level (4–20 mA), threshold setting, and status indicators |
| Power Supply | AC 100 V ±10%, 50/60 Hz, ≤100 VA |
| Enclosure Rating | IP66 |
| Operating Temperature | −10 to +50 °C |
| Dimensions | Ø185 × 547 mm (H) |
| Weight | ~11 kg |
| Optional Features | Integrated HD surveillance camera with pre-/post-alarm MP4 video recording (3 fps, 6 MB/event), automatic LED illumination for nighttime operation, LAN remote monitoring capability |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | LO-300 |
| Detection Principle | Laser Circular Area Scanning Reflectometry |
| Detection Range | 0.3–4.0 m (up to 6.0 m on still water) |
| Oil Detection Target | Floating/Adherent hydrocarbon films (gasoline, kerosene, diesel, heavy fuel oil, insulating oil, lubricating oil) |
| Output | 4–20 mA analog signal (reflected light intensity), 2 dry contact alarms (oil film presence, system fault) |
| Display | Color touchscreen showing oil coverage (%), threshold level, real-time received light level, status indicators |
| Power Supply | AC 100 V ±10%, 50/60 Hz, ≤100 VA |
| Enclosure Rating | IP66 |
| Operating Temperature | −10 to +50 °C |
| Dimensions | Ø185 × 547 mm (H) |
| Weight | ~11 kg |
| Optional | Surveillance camera module (MP4 video recording at 1 or 3 fps |
| Compliance | CE-marked |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | LO-300 |
| Detection Principle | Laser Circular Area Scanning Reflectometry |
| Detection Range | 0.3–4.0 m (up to 6.0 m on still water) |
| Protection Rating | IP66 |
| Power Supply | AC 100 V ±10%, 50/60 Hz, ≤100 VA |
| Operating Temperature | −10 to +50 °C |
| Dimensions | Ø185 × 547 mm (H) |
| Weight | ~11 kg |
| Output | 4–20 mA analog (reflected light intensity), 2 dry contact alarms (oil film presence, system fault) |
| Display | Color touchscreen showing oil coverage (%), threshold level, real-time signal level, and status indicators |
| Optional Video Recording | MP4 format, up to 3 fps, 6 MB per event (pre- and post-alarm), LED-illuminated night operation, LAN-enabled remote monitoring |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | LO-300 |
| Instrument Type | Online |
| Measurement Principle | Laser Circular Area Scanning Reflectometry |
| Measurement Range | 0–200 mg/L |
| Detection Limit | < 200 mg/L |
| Accuracy | ±1 mg/L |
| Resolution | 0.01 mg/L |
| Measurement Frequency | 0.5/min |
| IP Rating | IP66 |
| Operating Temperature | −10 to +50 °C |
| Detection Distance | 0.3–4.0 m (up to 6.0 m on still water) |
| Power Supply | AC 100 V ±10%, 50/60 Hz, ≤100 VA |
| Dimensions | Ø185 × 547 mm (H) |
| Weight | ~11 kg |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | LO-300 |
| Instrument Type | Online |
| Detection Principle | Laser Circular Area Scanning Reflectometry |
| Detection Range | 0.3–4.0 m (up to 6.0 m on still water) |
| Oil Detection Target | Floating/Adherent hydrocarbon films (gasoline, kerosene, diesel, heavy fuel oil, insulating oil, lubricating oil) |
| Output | 4–20 mA analog signal (reflected light intensity), 2 dry contact alarms (oil film presence, system level anomaly) |
| Display | Touchscreen interface showing oil coverage (%), threshold setting, real-time received light level, status indicators |
| Power Supply | AC 100 V ±10%, 50/60 Hz, ≤100 VA |
| Enclosure Rating | IP66 |
| Operating Temperature | −10 to +50 °C |
| Dimensions | Ø185 × 547 mm (H) |
| Weight | ~11 kg |
| Optional | Surveillance camera module (MP4 video recording at 1 or 3 fps |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | LO-300 |
| Detection Principle | Laser Circular Area Scanning Reflectometry |
| Detection Range | 0.3–4.0 m (up to 6.0 m on still water) |
| Oil Detection Target | Floating/Adherent hydrocarbon films (gasoline, kerosene, diesel, heavy fuel oil, insulating oil, lubricating oil) |
| Output | 4–20 mA analog signal (reflected light intensity), 2 dry contact alarms (oil film alarm, system fault) |
| Display | Touchscreen GUI showing oil coverage (%), threshold level, real-time received light intensity, status indicators |
| Power Supply | AC 100 V ±10%, 50/60 Hz, ≤100 VA |
| Enclosure Rating | IP66 |
| Operating Temperature | −10 to +50 °C |
| Dimensions | Ø185 × 547 mm (H) |
| Weight | ~11 kg |
| Optional | Surveillance camera module (MP4 video recording at 1 or 3 fps, pre-/post-alarm buffer, LED illumination for night operation, timestamp overlay) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | LO-300 |
| Detection Principle | Laser Circular Area Scanning Reflectometry |
| Detection Range | 0.3–4.0 m (up to 6.0 m on still water) |
| Oil Film Area Threshold Setting | 0–100% |
| Alarm Output | 2 relay contacts + 4–20 mA analog output |
| Environmental Rating | IP66 |
| Operating Temperature | −10 to +50 °C |
| Power Supply | AC 100 V ±10%, 50/60 Hz, ≤100 VA |
| Dimensions | Ø185 × 547 mm (H) |
| Weight | ~11 kg |
| Optional Video Recording | MP4, 1 or 3 fps, 6 MB per event, pre-/post-alarm capture |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | LO-300 |
| Detection Principle | Laser Circular Area Scanning Reflectometry |
| Detection Range | 0.3–4.0 m (up to 6.0 m on still water) |
| Oil Detection Target | Floating/Adherent hydrocarbon films (gasoline, kerosene, diesel, heavy fuel oil, insulating oil, lubricating oil) |
| Output Signals | 4–20 mA analog output (reflected light intensity), 2 dry contact outputs (oil film alarm, system fault) |
| Display | Color touchscreen showing oil coverage (%), threshold level, real-time received light intensity, status indicators |
| Power Supply | AC 100 V ±10%, 50/60 Hz, ≤100 VA |
| Enclosure Rating | IP66 |
| Operating Temperature | –10 to +50 °C |
| Dimensions | Ø185 × 547 mm (H) |
| Weight | ~11 kg |
| Optional | Surveillance camera module (MP4 video recording at 1 or 3 fps |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | LO-300 |
| Detection Principle | Laser-based Reflective Scanning |
| Detection Range | 0.3–4.0 m (up to 6.0 m on still water) |
| Oil Detection Method | Non-contact surface oil film reflectance measurement |
| IP Rating | IP66 |
| Power Supply | AC 100 V ±10%, 50/60 Hz, ≤100 VA |
| Operating Temperature | −10 to +50 °C |
| Enclosure Dimensions | Ø185 × 547 mm (H) |
| Weight | ~11 kg |
| Output Signals | 4–20 mA analog output (reflected light intensity), 2 dry contact outputs (oil alarm & unit tilt fault) |
| Display | Color touchscreen showing oil coverage (%), received signal level (4–20 mA), threshold setting, and status indicators |
| Optional Video Recording | MP4 format, up to 3 fps, 6 MB per clip, pre-/post-alarm capture, LED-assisted night imaging, LAN-enabled remote monitoring |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | LO-300 |
| Instrument Type | Online |
| Detection Principle | Laser Circular Area Scanning Reflectometry |
| Detection Range | 0.3–4.0 m (up to 6.0 m on still water) |
| Oil Detection Target | Floating/Adherent hydrocarbon films (gasoline, kerosene, diesel, heavy fuel oil, insulating oil, lubricating oil) |
| Output | 4–20 mA analog signal (reflected light intensity), 2 dry contact outputs (oil film alarm, system fault) |
| Display | Color touchscreen showing oil coverage (%), threshold level, real-time received light intensity, status indicators |
| Power Supply | AC 100 V ±10%, 50/60 Hz, ≤100 VA |
| Enclosure Rating | IP66 |
| Operating Temperature | –10 to +50 °C |
| Dimensions | Ø185 × 547 mm (H) |
| Weight | ~11 kg |
| Optional | Surveillance camera module (MP4 video recording at 1 or 3 fps |
| Compliance | Class 2 laser (≤1 mW semiconductor laser) |