Inframet
Filter
Showing 31–60 of 75 results
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | LS-DAL |
| Spectral Range | 400–1100 nm |
| Luminance Range (DN version) | 10 μcd/m² – 10 kcd/m² |
| Dynamic Range | 10⁹ |
| Output Angle | ≤15° (Lambertian) |
| Operating Temperature | +5°C to +35°C |
| Dimensions | 380 × 260 × 250 mm |
| Weight | 12 kg |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | LS-LAM-100C |
| Aperture | 100 mm |
| Spectral Range | 400–2000 nm |
| Correlated Color Temperature | 2856 K (visible–NIR) |
| Luminance Uniformity | ≥98% |
| Luminance Range | 1 mcd/m² to 10 kcd/m² |
| Illuminance Simulation Range (for 100% reflectance target) | 3 mlx to 30 klx |
| Total Dynamic Range | 10⁷ |
| Luminance Adjustment Resolution | ≤10 mcd/m² |
| Temporal Stability | <1% (over 8 h) |
| Operating Temperature | +5°C to +35°C |
| Storage Temperature | −5°C to +55°C |
| Relative Humidity | <90% RH (non-condensing) |
| Dimensions | 430 × 490 × 290 mm |
| Weight | 15 kg |
| Power Supply | 110/220 VAC, 50 Hz |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | LS-LAM-40M |
| Spectral Range | 350–2200 nm |
| Aperture | 40 mm (expandable to 100 mm with C100 collimator tube) |
| Color Temperature | 2856 K ± 100 K (measured over 400–1000 nm) |
| Luminance Range | 1 mcd/m² to 800 cd/m² |
| Luminance Resolution | 0.1 mcd/m² (low-range) |
| Stability | < 1% (over 30 min, ambient-controlled) |
| Filter Options | 3-position manual spectral filter wheel (VIS-only / NIR+SWIR / SWIR-only) |
| Dimensions | 370 × 490 × 290 mm |
| Weight | 12 kg |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | LS-SAL |
| Spectral Range | 400–2200 nm |
| Primary Modes | Halogen (2856 K, unfiltered), White LED (>5000 K), Hybrid Halogen+LED, 1550 nm Narrowband (±15 nm), SWIR Bandpass (900–2200 nm) |
| Luminance Range (Halogen mode) | 10 μcd/m² – 1000 cd/m² |
| Radiance Range (1550 nm mode) | 0.1 mW·sr⁻¹·m⁻² – 1 W·sr⁻¹·m⁻² |
| Radiance Range (SWIR mode) | 2 mW·sr⁻¹·m⁻² – 20 W·sr⁻¹·m² |
| Stability | <1% (all modes) |
| Warm-up/Stabilization Time | <90 s (halogen), <30 s (LED), <100 s (hybrid) |
| Aperture Diameter | 40 mm |
| Brightness Resolution | 10 μcd/m² (low-luminance), 0.01 cd/m² (LED), 0.05 mW·sr⁻¹·m⁻² (1550 nm), 1 mW·sr⁻¹·m⁻² (SWIR) |
| Attenuation | Mechanical optical attenuator (continuous, calibrated) |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | LTE |
| Wavelength Support | 910 nm, 1060 nm, 1540 nm, 1550 nm, 1570 nm |
| Target Angular Size Adjustment Steps | 0.25, 0.5, 0.75, 1.0, 1.5, 2.0, 4.0 mrad |
| Optical Aperture | Two 70 mm incomplete circular channels |
| Detector Type | Calibrated ultrafast InGaAs photodiode |
| Interface | USB 2.0 |
| Operating Temperature | +5 °C to +35 °C |
| Storage Temperature | −5 °C to +50 °C |
| Relative Humidity | Up to 95% (non-condensing) |
| Dimensions (H × L × W) | 350 mm × 1500 mm × 445 mm (main module + platform) |
| Weight | ~59 kg (main module + platform + 10 kg auxiliary modules + PC) |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | LTF |
| Price Range | USD 105,000 – 132,000 |
| Spectral Range | 700–1700 nm |
| Calibration Wavelengths | 910 nm, 1060 nm, 1540/1550/1570 nm |
| Simulated Target Quantity | 1 (expandable to 3) |
| Simulated Target Distance | ~1200 m |
| Attenuation Range | ≥40 dB |
| Attenuation Control | Motorized, computer-driven |
| Maximum Target Divergence | 4 mrad |
| Minimum Target Divergence | 0.25 mrad |
| Target Divergence Step Resolution | 5 discrete values |
| Target Divergence Control | Computer-controlled |
| Optical Axis Misalignment Verification | Supported |
| Maximum Transmit Aperture | 50 mm (upgradeable) |
| Maximum Receive Aperture | 50 mm (upgradeable) |
| Dual-Channel Architecture | Standard (supports coaxial LRF testing as optional configuration) |
| Required Optical Overlap | Precise collimation alignment between LTF and DUT optical axes |
| Operating Temperature | 5°C to 40°C |
| Storage Temperature | −5°C to 60°C |
| Relative Humidity | Up to 95% RH (non-condensing) |
| Power Supply | AC 110–230 V, 50/60 Hz |
| Dimensions (Main Unit) | 1360 × 320 × 280 mm |
| Weight | 44 kg |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | MAB |
| Spectral Coverage | 10 GHz – 3 THz (configurable bands A–Ka) |
| Emissivity | ≥0.96–0.99 (band-dependent) |
| Aperture Size | 150 mm × 150 mm to 1000 mm × 1000 mm |
| Temperature Range | −30°C to +300°C (model-dependent: LT, ST, EX, HT, EHT) |
| Temperature Resolution | 1 mK |
| Temperature Uniformity | <0.1×(T−T<sub>amb</sub>) or 0.5°C |
| Stability | ±5 mK @ ΔT = 10°C |
| Total Temperature Uncertainty | +100 mK (at T = 25°C, ambient = 25°C) |
| Heating/Cooling Rate | 0.40°C/s / 0.20°C/s (band A, 25°C) |
| Settling Time | <120 s (band A) |
| Control Interface | RS-232/USB 2.0 (standard), RS-485 (optional) |
| Power Supply | 230 VAC |
| Max. Power Consumption | 300 W – 12 kW |
| Operating Temp. | 5°C – 40°C |
| Storage Temp. | −10°C – +60°C |
| Humidity | 5–95% RH (non-condensing) |
| Weight | 18 kg – 170 kg |
| Dimensions | 200×200×300 mm – 1250×1400×400 mm |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | MIM |
| Type | Non-computerized, manually operated modular optical test system for thermal/visible sensor alignment and performance verification |
| Optical Configuration | Off-axis reflective collimator (CDT series) + uncalibrated dual-color blackbody (DNCB) + manual target slider (TP2) + adjustable NIR/thermal contrast source |
| Spectral Range | 0.4–15 µm |
| Target Types | Metallic & glass USAF 1951 (1.00–57 lp/mm), coaxial alignment pinhole (0.5 mm standard) |
| Collimator Aperture | 110–300 mm |
| Focal Length | 300–1000 mm |
| Spatial Resolution | ≥100 lp/mrad |
| Mirror Surface Accuracy | λ/6 P-V @ 630 nm (HR grade) |
| Emissivity | ≥0.95 |
| Blackbody ΔT Range | ±10 °C vs ambient |
| Brightness Range | ≤500 cd/m² |
| Power Supply | 110/220 VAC, 50/60 Hz |
| Operating Temperature | +5 °C to +35 °C |
| Weight | 7–90 kg (system-dependent) |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | MIRAD |
| Radiation Range | 0.7 µm – 30 µm |
| Blackbody Temp. Range | 50 °C – 550 °C |
| Uniformity | < ±2% over Ø30 mm |
| Irradiance at Wafer Plane | ≥8 mW/cm² (broadband) |
| Working Distance (TP3 to Sensor) | 28 mm (customizable) |
| VAB Attenuation Range | 0–100% (0.1% resolution) |
| Control Interface | USB, PC-hosted software |
| Ambient Operating Conditions | +5 °C to +35 °C, ≤75% RH |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | MRW-8 |
| Target Wheel Aperture Count | 8 |
| Positioning Uncertainty (Standard) | < 0.15 mm |
| Positioning Uncertainty (Custom High-Precision Version) | 0.05 mm |
| Emissivity of Coated Surface | ≥ 0.97 |
| Interface Compatibility | CDT Collimator, TCB Blackbody, DCB Multispectral Blackbody, DAL/SAL Radiation Sources |
| Control Options | PC-based software via external controller (BBB/B variants), manual electronic control (C variant) |
| Aperture Geometry Options | Circular (standard), square (7+1 configuration in A variant) |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | MS |
| Aperture Options | 100–600 mm (selectable) |
| Spectral Coverage | VIS, NIR, SWIR, MWIR, LWIR |
| Measurement Capabilities | MRTD, MTF, SiTF, NETD, FPN, Non-Uniformity, FOV, Distortion, Magnification, Response Function, 3D Noise, Bad Pixels, PVF, SNR, TOD, NEFD, MDTD, NER, NEP, ATF, NEI, D* |
| Alignment Functions | Co-boresighting of thermal imagers, VIS/NIR/SWIR cameras, and laser systems (rangefinders, designators, illuminators) |
| Imaging Interface Options | Analog (PAL/NTSC), Camera Link, GigE Vision, LVDS, USB 2.0 |
| Compliance | Designed for ASTM E1213, ISO 12233, ISO 18844, MIL-STD-3009, and GLP/GMP-aligned test workflows |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | MTB |
| Temperature Range | Ambient +5°C to 550°C |
| Aperture Options | 50×50 mm to 300×300 mm |
| Emissivity | 0.96 ± 0.01 |
| Temperature Resolution | 0.01°C |
| Temperature Uncertainty | 0.07°C or 0.002×(T−25)°C |
| Spatial Uniformity | ≤0.002×(T−25)°C (MTB-2D) to ≤0.01×(T−25)°C (MTB-12D) |
| Stabilization Time | <10 min to <25 min (model-dependent) |
| Control Interface | RS-232 / USB 2.0 |
| Power Supply | 115–230 VAC, 50/60 Hz (single-phase) up to 400–6200 W (model-dependent) |
| Operating Temperature | +5°C to +45°C |
| Storage Temperature | −10°C to +60°C |
| Weight | 12 kg to 67 kg |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | MULTIC |
| Aperture Compatibility | Up to 400 mm or 500 mm |
| Spectral Range | Visible to Far-IR |
| Core Radiation Sources | VASIP14D Broadband Multispectral Source & TCB4D Blackbody |
| Optical Configuration | Off-axis Newtonian Collimator |
| Target Mounting | Interchangeable Standard Targets at Focal Plane |
| Calibration Status | Factory-calibrated Projection System |
| Compliance | Designed for ISO 12233, ASTM E1552, MIL-STD-1472D, and GLP/GMP-aligned test workflows |
| Software | Dedicated control & analysis suite with audit-trail logging (21 CFR Part 11 ready) |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | NIGHTMET |
| Application Domain | Image Intensifier Resolution & MTF Characterization Training & Validation |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | NIMAX |
| Light Source Options | 2850 K halogen & 660 nm LED |
| Luminance Range | 2×10⁻⁵ to 200 lx |
| Luminance Resolution | 10 µlx (low-light range) |
| Collimator Apertures | 35 mm and 120 mm |
| Collimator Resolution | >30 lp/mrad (35 mm), >60 lp/mrad (120 mm) |
| Brightness Meter Range | 0.01–100 cd/m² |
| Operating Temperature | 5–40 °C |
| Dimensions | 1771 × 1429 × 553 mm |
| Weight | 130 kg |
| Power Supply | 110–230 VAC, 50/60 Hz |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | NMAG |
| Field of View (FOV) | up to 50° (monocular), up to 10° (binocular/scope) |
| Photometric Light Source | 2856 K halogen lamp |
| Monochromatic Light Source | 660 nm LED |
| Illuminance Range | 2×10⁻⁵ lx – 200 lx (LED mode) |
| Luminance Measurement Range (ILM3C) | 10 µcd/m² – 1000 cd/m² |
| Camera Resolution | NVC3: 1280×958 px |
| NDC3 | 2748×2748 px |
| MTF Measurement Range | 0–2.5 lp/mrad (scaled by magnification for scopes) |
| Center Resolution Range | 0.25–7.2 lp/mrad |
| Relative Uncertainty | 2%–15% depending on parameter |
| Calibration Interval | 2 years |
| On-site Re-calibration | CALNOK kit supported |
| Compliance | PN-EN ISO/IEC 17025 test report generation |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | NVS |
| Optical Aperture Capacity | Up to 120 mm (optional 150 mm) |
| Light Sources | Dual-source — 2850 K halogen lamp & 660 nm monochromatic LED |
| LED Illuminance Range | 0.1 mlx – 200 lx |
| Resolution | 0.01 mlx (low-light range) |
| Adjustment Type | Continuous mechanical manual control |
| Illuminance Stability | ±2% of set value |
| Collimator Options | CNV12100 (120 mm / 1000 mm), CNV950 (90 mm / 500 mm), CNV421 (35 mm / 210 mm), optional CNV15120 (150 mm / 1200 mm), CNV1260 (120 mm / 600 mm) |
| Collimator Resolution | ≥100 lp/mrad (CNV12100), ≥60 lp/mrad (CNV950), ≥30 lp/mrad (CNV421) |
| Target Set | USAF 1951 resolution chart (100% contrast), three FOV targets, distortion target, five dark-spot targets, three crosshair targets, five MRC targets with graded contrast levels |
| Luminance Meter Range | 0.01–1000 cd/m² |
| Display | Integrated digital screen |
| Power Supply | 230 VAC, 50/60 Hz |
| Operating Temperature | 5°C – 40°C |
| Lamp Lifetime | >10,000 hours |
| Dimensions (incl. collimator) | 1380 × 690 × 360 mm |
| Gross Weight | 47 kg |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | OPO |
| Key Parameters | Resolution (0–2.5×M lp/mrad), MTF (on-axis & off-axis), Magnification, Distortion (<20%), FOV (up to 30°), Vignetting (relative uncertainty ≤3%), Exit Pupil Distance (0–10 mrad, ±0.1 mrad), Exit Pupil Diameter, Diopter Range (±X mrad), Parallax Measurement Capability |
| Compliance | Designed for ISO 10110-5, MIL-STD-1472G, and NATO AEP-97 optical test protocols |
| Software | TOPO v3.x with GLP-compliant audit trail, FDA 21 CFR Part 11–ready configuration options |
| Imaging | Dual-camera architecture (IM-PO & IM-TR) synchronized with TG-OP target generator and CPO-series collimators |
| Mechanical | MP-A/MP-B/MP-C precision motorized platforms with sub-arcminute repeatability |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | ORI |
| Wavelength Coverage | VIS, NIR, SWIR, MWIR, LWIR |
| F/# Support | ≥0.7 |
| 焦距测量范围 | 7–1500 mm |
| Lens Diameter Range | 7–300 mm |
| MTF Spatial Frequency Range (VIS) | 0–400 lp/mm |
| MTF Uncertainty | ±0.02 (MTF > 0.2) |
| Compliance | ISO 10110-5, ISO 9039, ASTM E3087, MIL-STD-1472G |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | SIM |
| Optical Tube Type | Off-axis reflective collimator |
| Aperture | 60–250 mm (model-dependent) |
| Focal Length | 600–2500 mm |
| Spectral Range | 0.4–15 µm |
| Spatial Resolution | ≥30 mrad (CDT660SR & CDT11100SR), ≥50 mrad (larger models) |
| Mirror Surface Accuracy | λ/3 @ 630 nm |
| Coating | Protected aluminum |
| FOV | 2.7° |
| Blackbody Type | NSB40, non-stabilized |
| Radiating Area | 40 × 40 mm |
| Emissivity | ≥0.96 |
| ΔT Range | ≥−10 °C to +10 °C |
| Target Types | Crosshair (7–14 mm line width) & USAF 1951 (1.00–14.30 lp/mm) |
| Power Supply | 110/220 VAC, 50/60 Hz |
| Operating Temperature | 10–35 °C |
| Weight | 7–60 kg (system-dependent) |
| Dimensions | 610×140×210 mm to 2610×350×400 mm |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | SIMAT |
| Spectral Range | 1–5.5 µm (expandable to UV, visible, and extended IR) |
| Field of View | Up to 120° via precision rotary stage (standard FOV: 7° circular or 5° × 5°) |
| Target Simulation | Two independent dynamic targets with adjustable angular size, position, intensity, and spectral radiance |
| Background Simulation | Variable-temperature semi-transparent blackbody |
| Control Interface | Fully computerized (trajectory, speed, radiometric parameters, timing synchronization) |
| Optical Architecture | Dual off-axis reflective collimators + beam combiner |
| Angular Size Adjustment | Motorized aperture + reflective mirror positioning |
| Radiance Control | Blackbody temperature tuning + neutral density filters |
| Compliance | Designed for laboratory-based IR sensor characterization per MIL-STD-3009, ISO 12233 Annex E, and NATO AEP-44 test protocols |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | SIMTERM |
| Price Range | USD 27,000 – 41,000 (based on EUR/USD exchange and typical import markup) |
| Application Domain | Infrared System Simulation, Thermographic Training & IR Sensor Design Support |
| Compliance Context | Supports ISO 18434-1 (condition monitoring), ASTM E1934 (infrared inspection standards), and GLP-aligned training documentation workflows |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | SIT |
| Spectral Range | 400–2200 nm |
| Temperature Operating Range | +5 °C to +35 °C |
| Storage Temperature Range | −5 °C to +55 °C |
| Relative Humidity | ≤90% RH (non-condensing) |
| Weight | 58 kg |
| Dimensions | 173 × 43 × 28 cm |
| Core Modules | SITO Tunable Calibration Source + IPS Image Processing System |
| Measured Parameters | Relative Spectral Responsivity, Radiometric Responsivity, Noise-Equivalent Irradiance (NEI), Specific Detectivity (D*), Spatial Noise |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SPOT |
| Price Range | USD 68,000 – 109,000 (based on exchange rate and configuration) |
| Sensor Type | Cooled MWIR FPAs |
| Spectral Range | 1.0–5.5 µm |
| Spot Power | ≥4 mW |
| Spot Diameter (FWHM) | <6 µm |
| Pixel Size Compatibility | ≥8 µm (optional down to <8 µm) |
| FPA Format Support | SXGA (1280 × 1024) |
| Responsivity | >0.1 A/W |
| XY Scan Range | ≥10 × 10 mm |
| Coarse Scan Resolution | 2.5 µm |
| Fine Scan Resolution | 0.5 µm |
| Focus Travel | 18 mm |
| Focus Resolution | 0.5 µm |
| Environmental Operating Temp | +5 °C to +35 °C |
| Storage Temp | −5 °C to +55 °C |
| Max Operating Humidity | 85% RH (non-condensing) |
| Interface | USB 2.0/3.0, PC-controlled |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | ST |
| Light Source | Dual-mode (Halogen 400–2200 nm & 1060 nm LED) |
| Collimator Type | Reflective, Off-axis |
| Aperture | 40 mm (off-axis), 100–200 mm (primary) |
| Blackbody Temperature Range | 50–600 °C |
| Target Wheel | 8-position, motorized, RS-232/USB 2.0 controlled |
| Spatial Resolution | ≥160 lp/mrad |
| Halogen Luminance Range | 0.02–3000 cd/m² |
| LED Dynamic Range | 10⁴:1 |
| Spectral Coverage | 0.4–15 µm |
| Target Temperature Stability | ±0.05 °C |
| Temperature Settling Time | <30 min |
| Target Mounting Diameter | 54 mm |
| Mirror Coatings | Aluminum (parabolic), Gold (flat) |
| Power Supply | 115–230 VAC, 50/60 Hz |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | TAIM |
| Application | Optical performance evaluation of thermal weapon sights and thermal imager clamps |
| Core Modules | DT120 test platform (image projection & analysis), Picatinny rail fixture, dual HEC high-resolution infrared cameras, AHEC adapter ring, YNAS10 angular adjustment stage, DPM diopter meter, AT720 optical bench |
| Max Tested Device Aperture | ≤120 mm |
| Measurement Capabilities | MRTD (Minimum Resolvable Temperature Difference), diopter adjustment range & scale accuracy, eyepiece diopter calibration, focus-induced image shift (optional) |
| Compliance | Designed for ISO 12233-based spatial resolution protocols and ASTM E1213-22 for thermal imaging system characterization |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | TCB |
| Aperture Options | 50×50 mm to 500×500 mm |
| Temperature Range (Standard) | −20 °C to +80 °C |
| Extended Ranges | EX (−30 °C to +100 °C), UEX (−35 °C to +130 °C), HT (+180 °C max), LT (−40 °C min) |
| Emissivity | 0.98 ± 0.005 (HE option: 0.99 ± 0.005) |
| Spatial Uniformity | < 0.01 °C or 0.4%· |
| Temperature Stability | ±2 mK |
| Total Uncertainty | 0.03 °C |
| Resolution | 1 mK |
| Warm-up/Cool-down Rates | 0.15–10 °C/s (model-dependent) |
| Stabilization Time | <30 s to <80 s |
| Control Interface | USB 2.0 |
| Power Supply | 115–230 VAC, 50/60 Hz |
| Operating Ambient | +5 °C to +45 °C (non-condensing) |
| Dimensions & Weight | 160×230×180 mm / 7.5 kg (TCB-2D) to 430×630×880 mm / 165 kg (TCB-20D) |
| Compliance | Designed for ISO/IEC 17025-accredited calibration labs |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | TFEV |
| Type | Modular Blackbody-Based Calibration and Performance Verification System for Fever-Screening Thermal Cameras |
| Compliance | IEC 60601-2-59 (Ed. 2.0, 2017) |
| Primary Function | Quantitative verification of thermal sensitivity, spatial resolution (MRTD), minimum resolvable temperature difference, target size response, and measurement repeatability of infrared fever-screening systems |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | THP |
| Blackbody Emission Area | 200 mm to 1000 × 1000 mm |
| Spectral Range | 0.03–30 THz (0.01–10 mm) |
| Blackbody Temperature Range | +5 °C to +95 °C |
| Target Plate Dimensions | 250 × 250 mm to 1200 × 1200 mm |
| Target Set | 8-bar MRTD targets, 1 knife-edge MTF target, 1 square uniformity/noise target |
| Bar Widths | 2–50 mm |
| Target Emissivity | >0.95 |
| Image Acquisition Interfaces | Analog Video / CameraLink / GigE |
| Control Interface | USB 2.0 |
| Power Supply | 115–230 VAC, 50/60 Hz |
| Operating Temperature | +5 °C to +45 °C (non-condensing) |
| Storage Temperature | −10 °C to +60 °C |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | TM-1000 |
| Thermocouple Types | Type N (Metal-Sheathed), Type S (Ceramic-Sheathed) |
| Temperature Range (Type N) | 100 °C to 1010 °C (short-term up to 1050 °C) |
| Temperature Range (Type S) | 600 °C to 1510 °C (short-term up to 1550 °C) |
| Resolution | 0.01 °C (10 mK) |
| Measurement Uncertainty | ±0.6 °C (≤250 °C, Type N), ±1.2 °C (≤750 °C, Type N), ±1.5 °C (≤1000 °C, Type N) |
| Temperature Units | °C, K, °F |
| Power Supply | 5 V DC via USB |
| Max. Power Consumption | 1 W |
| Connector | USB-B |
| Interface Standard | USB 2.0 |
| Communication Protocol | SCPI-compliant |
| Operating Environment | 10 °C to 40 °C (non-condensing), Storage: −10 °C to 60 °C |
| Controller Dimensions | 110 × 55 × 38 mm |
| Probe Dimensions (N) | Ø3 mm × 400 mm |
| (S) | Ø6 mm × 400 mm |
| Cable Length | 1.5 m |
| Weight | 400 g per set |