- All
- Favorite
- Popular
- Most rated
| Brand | Yuelian / PW |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PW-RT300 |
| Application | Laboratory-scale continuous hot-melt adhesive coating and laminating |
| Coating Method | Heated comma doctor blade |
| X-axis (Coating Travel) | 300 mm (effective) |
| Coating Thickness Range | 0.1–5 mm (uniformity ±4%) |
| Coating Speed | 0.5–5 m/min (adjustable per adhesive drying kinetics) |
| Blade Actuation | Pneumatic auto-lift |
| Thickness Adjustment | Manual micrometer fine-tuning |
| Temperature Control | Thermocouple-sensed PID touchscreen controller (max. 200 °C) |
| Web Tension Control | Adjustable unwind tension (1–25 N) |
| Unwind Roll Capacity | Ø200 mm, max. 100 kg |
| Rewind Roll Diameter | Ø200 mm |
| Frame Construction | Electroplated steel frame + anodized aluminum structural modules + 304 stainless steel outer panels |
| Heating System | Calrod electric heating elements |
| Laminating Module | Integrated automatic lamination station |
| Core Type | 3-inch pneumatic expanding shaft (tapered mandrel) |
| Drive System | Inverter-controlled AC motor |
| Power Supply | 220 V AC, 50/60 Hz |
| Total Rated Power | 5 kW (nominal) |
| Compressed Air Requirement | 0.55–0.7 MPa |
| Brand | Yuelian / PW |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PW-C02 |
| Application | Laboratory-scale coating development and process simulation |
| Coating Method | Dual-mode — Doctor Blade & Wire Rod (independently operable) |
| Temperature Range | Ambient to 160 °C (PID-controlled constant-temperature heating) |
| Wet Film Thickness Range | 5 µm to 5 mm |
| Overall Dimensions (L×W×H) | 800 × 380 × 410 mm |
| Coating Speed | 1–5 m/min (digital display & adjustable) |
| Substrate Width Capacity | 300 mm |
| Maximum Coating Length | 10–450 mm (programmable) |
| Leveling System | Integrated mechanical leveling bar (pre-coating substrate flattening) |
| Vacuum Platform | Uniformly distributed vacuum suction (aluminum alloy + removable tempered glass surface) |
| Coating Uniformity | ±4% (dependent on substrate flatness and fluid rheology) |
| Wire Rod Specifications | Ø10 × 400 mm (standard), supplied with two adjustable counterweights |
| Blade Material | High-strength corrosion-resistant stainless steel (austenitic grade) |
| Power Supply | 110–220 V AC, 50/60 Hz |
| Power Consumption | 48 W (standby), 2000 W (max heating load) |
| Net Weight | 44 kg |
| Brand | PW (Yuelian) |
|---|---|
| Origin | Guangdong, China |
| Model | PW-TB320 |
| Coating Method | Wire-Bar (Standard ISO/GB Compliant, Optional Selection) |
| Coating Width | 300 × 420 mm |
| Travel Range (X-axis) | 300 × 420 mm |
| Coating Speed | Adjustable 1–5 m/min |
| Drive System | Infinitely Variable AC Motor |
| Control Interface | Dedicated Panel with Coating/Return/Stop/Speed Adjustment |
| Weighting System | Dual-Side Adjustable Counterweights |
| Wire-Bar Length | 400 mm |
| Power Supply | 110–220 V AC, 50/60 Hz |
| Rated Power | 120 W |
| Net Weight | 20 kg |
| Overall Dimensions | 710 × 420 × 285 mm (L×W×H) |
| Accuracy | Dependent on Wire-Bar Tolerance per ISO 2137 and GB/T 9278 |
| Brand | Yuelian/PW |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PW-C01 |
| Application | Laboratory-scale precision coating |
| Coating Method | Dual-mode — Doctor Blade & Wire Rod (independently operable) |
| X-axis Coating Travel | 300 × 450 mm |
| Temperature Range | Ambient to 160 °C (PID-controlled constant-temperature heating) |
| Wet Film Thickness Range | 5 µm – 5 mm |
| Overall Dimensions (L×W×H) | 660 × 470 × 390 mm |
| Coating Speed | 1–5 m/min (digital setpoint control) |
| Leveling Mechanism | Integrated aluminum alloy leveling bar |
| Substrate Platform | Removable anodized aluminum + tempered glass surface |
| Coating Uniformity | ±4% (dependent on substrate flatness and surface energy) |
| Wire Rod Specifications | Ø10 × 400 mm (standard), supplied with dual adjustable counterweights |
| Blade Material | High-hardness stainless steel alloy |
| Power Supply | 110–220 V AC, 50/60 Hz |
| Power Consumption | 48 W (standby), 2000 W (heating mode active) |
| Net Weight | 42 kg |
| Brand | Yuelian / PW |
|---|---|
| Origin | Guangdong, China |
| Model | PW-SY300 |
| Coating Methods | Adjustable Doctor Blade & Removable Wire Rod (Independent Operation) |
| Coating Speed | 1–5 m/min (digital setting) |
| Coating Length | 10–300 mm (digital setting) |
| Temperature Range | Ambient to 160 °C (PID-controlled, ±1 °C stability) |
| Substrate Flatness Preconditioning | Integrated Mechanical Leveling Bar |
| Coating Uniformity | ±4% (dependent on substrate flatness and surface energy) |
| Maximum Coating Area | 200 × 300 mm |
| Wet Film Thickness Range | 5 µm – 5 mm |
| Heating Power | 2000 W (main stage) |
| Standby Power | 48 W |
| Power Supply | 110–220 V AC, 50 Hz |
| Construction | Anodized Aluminum Frame & Stage |
| Blade Material | Alloy Stainless Steel (AISI 420 equivalent) |
| Wire Rod Specifications | Ø10 × 300 mm (standard), supplied with dual adjustable counterweights |
| Weight | 28 kg (net) |
| Dimensions (L×W×H) | 550 × 350 × 350 mm |
| Compliance | CE-marked electrical architecture |
| Brand | Yuelian (PW) |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PW-RT380 |
| Coating Width | 380 mm (effective) |
| Coating Methods | Wire-Bar & Doctor Blade |
| Adhesive Delivery | Manual |
| Coating Thickness Range | 0.01–1 mm (±3 µm accuracy) |
| Thickness Adjustment | Micrometer Dial |
| Rewinding Motor | Variable-Frequency Drive (VFD) |
| Tension Control | Adjustable |
| Line Speed | 0.5–3 m/min |
| Oven Length | 0.5–6 m (configurable) |
| Power Supply | 220 V AC |
| Total Power Consumption | 6 kW |
| Application Scope | R&D and QC coating trials for thin-film functional materials |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-AO-300 |
| Price Range | USD 2,800–7,000 |
| Instrument Type | Benchtop Forced-Convection Box Furnace |
| Max Operating Temperature | 200 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Max Power Rating | 7.5 kW |
| Ramp Rate to Max Temp | ≤45 min (from RT+20 °C) |
| Heating Method | Stainless Steel Sheathed Tubular Heaters |
| Internal Dimensions | 500 mm (W) × 1000 mm (H) × 600 mm (D) |
| External Dimensions | 850 mm (W) × 1535 mm (H) × 800 mm (D) |
| Insulation | 100 mm Thick 80 kg/m³ Rock Wool |
| Door Seal | Imported Japanese High-Tensile Silicone Rubber Gasket (−90 °C to +280 °C) |
| Atmosphere Control | Dual 10–100 L/min N₂ Mass Flow Meters with φ10 mm Quick-Connect Fittings |
| O₂ Monitoring | Integrated Paramagnetic Oxygen Analyzer (Real-Time Display, Alarm Threshold ≤1.0 % v/v) |
| Safety Systems | Independent Over-Temperature Cut-Off, Timer-Based Process Termination, SSR Solid-State Relay Control |
| Air Circulation | Axial-Flow High-Temp Motor with Multi-Blade Turbine Fan |
| Power Supply | 380 V AC, 3-Phase, 60 A Dedicated Circuit |
| Aging Power Output | 50 V DC Adjustable (0–60 A) via Built-in Aging PSU |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2201V |
| Chamber Volume Options | 27 L / 64 L / 125 L / 216 L |
| Internal Dimensions (W×D×H) | 30×30×30 cm / 40×40×40 cm / 50×50×50 cm / 60×60×60 cm |
| External Dimensions (W×D×H) | 60×47×80 cm / 70×57×90 cm / 70×70×90 cm / 90×77×110 cm |
| Temperature Range | Ambient to 200 °C (standard configuration) |
| Ultimate Vacuum | ≤11.6 kPa (−0.116 MPa gauge) |
| Chamber Material | SUS 304 stainless steel, 6.0 mm thick |
| Door | Dual-layer tempered glass with explosion-proof film |
| Sealing | High-compression silicone gasket |
| Power Supply | AC 220 V, 50 Hz |
| Timer Range | 0.1 s–999 h (adjustable resolution) |
| Casters | Four swivel casters with brakes |
| Compliance | Designed for UL 1642, UL 2054, and UN 38.3 altitude simulation testing |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TB100 |
| Price Range | USD 1,400 – 2,800 |
| Control System | 5-inch PLC Touchscreen HMI |
| Wet Film Thickness Range | 0.005–3 mm |
| Thickness Accuracy | ±0.0025 mm |
| Power Supply | 220 V AC, 50 Hz |
| Rated Power | 2000 W |
| Coating Speed | 0–10 m/min (digitally presettable) |
| Coating Length | Programmable (digital preset) |
| Maximum Coating Width | 300 × 450 mm |
| Heating Temperature Range | Ambient to 160 °C (PID-controlled constant temperature) |
| Coating Methods | Adjustable knife-over-plate and wire-wound rod modes |
| Doctor Blade Material | Tungsten carbide alloy (tool-grade, modular, tool-free quick-release design) |
| Net Weight | 55 kg |
Show next