- All
- Favorite
- Popular
- Most rated
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | C611B |
| Force Sensor Capacity | 3 × 9 kN |
| Force Accuracy | ±1% of reading (10–100% FS), ±0.1% FS (0–10% FS) |
| Force Resolution | 1 N |
| Deformation Resolution | 0.1 mm |
| Test Speed Range | 0–200 mm/min (adjustable in integer steps) |
| Speed Accuracy | ±2% of set value |
| Maximum Travel | 450 mm |
| Specimen Height Range | 0–600 mm |
| Test Chamber Dimensions | 600 mm (L) × 600 mm (W) × 610 mm (H) |
| Overall Dimensions | 650 mm (L) × 810 mm (W) × 1620 mm (H) |
| Weight | 180 kg |
| Power Supply | AC 220 V ±10%, 50 Hz OR AC 120 V ±10%, 60 Hz (user-selectable) |
| Brand | Labthink |
|---|---|
| Model | W3/062 |
| Principle | Gravimetric Cup Method (Weight Gain/Loss) |
| Test Range | 0.1–10,000 g/m²·24h (loss mode) |
| Sample Capacity | 1–6 specimens simultaneously |
| Temperature Control | 15–55 °C (±0.1 °C) |
| Humidity Control | 10–98 %RH (±1 %RH) |
| Test Area | 33 cm² |
| Specimen Thickness | ≤3 mm |
| Chamber Volume | 45 L |
| Power Supply | 220 VAC 50 Hz / 120 VAC 60 Hz |
| Net Weight | 80 kg |
| Compliance | ASTM E96, ASTM D1653, ISO 2528, GB/T 1037, GB/T 16928, TAPPI T464, DIN 53122-1, JIS Z0208, YBB00092003 |
| Brand | Labthink |
|---|---|
| Model | C390H |
| Measurement Principle | Infrared Detection of Water Vapor |
| Standards Compliance | ASTM F1249, ISO 15106-2, GB/T 26253, JIS K7129, YBB00092003-2015 |
| Test Range | 0.005–40 g/(m²·day) (film), 0.0003–2.6 g/(100in²·day), 0.000025–0.2 g/(pkg·day) (containers) |
| Resolution | 0.0001 g/(m²·day) |
| Repeatability | ±0.005 g/(m²·day) or ±2% (whichever is greater) |
| Temperature Control | 10–55 °C (±0.2 °C) |
| Humidity Control | 5–90 % RH (±1 % RH), up to 100 % RH |
| Test Chambers | 3 independent, integrated cavities |
| Sample Area | 50 cm² (standard) |
| Max Container Volume | 3 L |
| Sample Dimensions | ≤108 mm × 108 mm × 3 mm |
| Carrier Gas | 99.999% pure N₂, inlet pressure ≥0.28 MPa (40.6 psi) |
| Gas Interface | 1/8″ stainless steel tubing |
| Data Management | DataShield™ audit-trail-enabled software |
| Regulatory Support | Optional 21 CFR Part 11 compliance, GMP-compliant computer system validation package |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | C106H Gas Permeation Analyzer |
| Price Range | USD 14,000 – 98,000 |
| Test Principle | Differential Pressure Method (ISO 15105-1, ASTM D1434, GB/T 1038-2000) |
| Test Gases | O₂, N₂, CO₂ |
| Measurement Range | 0.01–50,000 cm³/m²·24h·0.1MPa |
| Resolution | 0.001 cm³/m²·24h·0.1MPa |
| Temperature Range | 15–50 °C (5–60 °C optional) |
| Temp. Stability | ±0.15 °C |
| Vacuum Capability | ≤10 Pa (Resolution: 0.01 Pa |
| Accuracy | ±0.2% of reading in 1–100% sensor span) |
| Test Area | 38.48 cm² |
| Sample Size | 11.2 cm × 11.2 cm |
| Max. Sample Thickness | 3 mm |
| Test Pressure Range | 10–150 kPa (adjustable |
| pressure stability | ±0.2 kPa) |
| Humidity Control | 0% RH or 5–90% ±2% RH (customizable) |
| Power Supply | 120 VAC ±10%, 60 Hz / 220 VAC ±10%, 50 Hz (selectable) |
| Dimensions | 600 × 490 × 660 mm |
| Weight | 100 kg |
| Key | Brand: Labthink |
|---|---|
| Model | MCJ-01A |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Compliance Standard | GB/T 7706 |
| Applied Load | 20 ± 0.2 N |
| Stroke Frequency | 43 cycles per minute (cpm) |
| Abrasion Area | 155 mm (L) × 50 mm (W) |
| Cycle Count Range | 0–999 |
| Specimen Size | 230 mm (L) × 50 mm (W) |
| Power Supply | 220 VAC, 50 Hz / 120 VAC, 60 Hz |
| Dimensions (L×W×H) | 260 × 230 × 360 mm |
| Net Weight | 22 kg |
| Brand | Labthink |
|---|---|
| Model | VAC-V2 |
| Measurement Principle | Differential Pressure (ASTM D1434, ISO 15105-1, GB/T 1038-2000) |
| Test Gases | N₂, O₂, CO₂, Air, He (customizable for flammable/explosive gases) |
| Test Range | 0.05–50,000 cm³/m²·24h·0.1MPa (expandable to ≥500,000 cm³/m²·24h·0.1MPa) |
| Independent Test Chambers | 3 |
| Temperature Control | 5–95 °C (±0.1 °C) |
| Humidity Control | 0%RH, 2–98.5%RH, 100%RH (optional humidity generator) |
| Vacuum Resolution | 0.1 Pa |
| Chamber Vacuum Level | <20 Pa |
| Sample Area | 38.48 cm² |
| Sample Diameter | Φ97 mm |
| Power Supply | 220VAC 50Hz / 120VAC 60Hz |
| Net Weight | 88 kg |
| Dimensions | 760 × 575 × 450 mm (L×W×H) |
| Brand | Labthink |
|---|---|
| Model | QYC-E |
| Material | ASTM F86-Compliant 316L Stainless Steel |
| Design Compliance | EN 13130-1:2004 Annex D, Figure D.6 (Migration Test Cell C) |
| Standard Conformance | GB 31604.1-2015, GB 5009.156-2016 |
| Contact Configuration | Single- or Double-Sided Exposure |
| Single-Side Exposure Area | 100 cm² (Ø112.8 mm) |
| Double-Side Exposure Area | 200 cm² |
| Chamber Volume | 200 mL |
| Operating Temperature Range | 5 °C to 180 °C |
| Dimensions (L×W×H) | 175 × 140 × 63 mm |
| Net Weight | 2.3 kg |
| Sealing System | High-Temperature Resistant, Chemically Inert Fluoroelastomer (FKM) Gasket |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer | Labthink Instruments Co., Ltd. |
| Model | MXD-01 |
| Load Range | 0–5 N |
| Accuracy Class | Class 1 |
| Travel Distance | 10 mm + 60 mm |
| Slider Mass Options | 200 g, 500 g (1000 g optional) |
| Test Speed | 100 mm/min |
| Temperature Range | 10–40 °C |
| Relative Humidity Range | 20–70 %RH |
| Power Supply | 220 VAC 50 Hz / 120 VAC 60 Hz |
| Dimensions (L×W×H) | 470 × 310 × 200 mm |
| Net Weight | 31 kg |
| Compliance | GB 10006, ISO 8295 |
| Brand | Labthink |
|---|---|
| Model | C306H |
| Measurement Principle | Infrared Absorption Spectroscopy (ASTM F1249 / ISO 15106-2) |
| Test Range | 0.02–40 g/(m²·day) @ 50 cm² |
| Resolution | 0.0001 g/(m²·day) |
| Repeatability | ±0.02 g/(m²·day) or ±2%, whichever is greater |
| Temperature Range | 15–50 °C (optional: 5–60 °C) |
| Temp. Stability | ±0.15 °C |
| RH Range | 5–90 %RH ±2% (at standard temp.) / 100 %RH |
| Test Area | 50 cm² (standard), optional 5 cm² or 1 cm² MASKs |
| Sample Size | 11.2 cm × 11.2 cm |
| Max. Thickness | 3 mm |
| Carrier Gas | ≥99.999% N₂, ≥280 kPa inlet pressure |
| Power Supply | 120 VAC ±10% 60 Hz or 220 VAC ±10% 50 Hz |
| Dimensions | 600 × 490 × 660 mm |
| Weight | 100 kg |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer | Labthink Instruments Co., Ltd. |
| Model | HST-H3 |
| Temperature Range | Ambient to 300 °C |
| Temperature Control Accuracy | ±0.2 °C |
| Sealing Time | 0.1–999.9 s |
| Sealing Pressure | 0.05–0.7 MPa |
| Sealing Surface Dimensions | 330 mm × 10 mm (customizable) |
| Heating Configuration | Independent dual-zone heating (top and bottom jaws) |
| Pneumatic Supply Requirement | 0.5–0.7 MPa (user-supplied air source, Ø6 mm polyurethane tubing) |
| Power Supply | 220 VAC 50 Hz / 120 VAC 60 Hz |
| Net Weight | 43 kg |
| Compliance Standards | QB/T 2358, ASTM F2029, YBB00122003 |
| Brand | Labthink |
|---|---|
| Model | C660B |
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Category | Domestic Instrument |
| Price Range | USD 1,400 – 4,200 |
| Vacuum Range | 0 to −90 kPa (0 to −13 psi) |
| Vacuum Accuracy | ±0.25% FS |
| Vacuum Resolution | 0.1 kPa / 0.01 psi |
| Vacuum Hold Time | 0–9999 min 59 sec |
| Standard Vacuum Chamber Dimensions | Φ270 mm × 210 mm (H) |
| Power Supply | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz |
| Net Weight | 6.5 kg (host), 9 kg (standard chamber) |
| Compliance Standards | GB/T 15171, ASTM D3078 |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | MXD-02 |
| Price Range | USD 1,400 – 8,500 |
| Load Range | 0–5 N |
| Accuracy Class | 0.5 |
| Travel Distance | 70 mm / 150 mm |
| Standard Sled Mass | 200 g (customizable sleds available) |
| Test Speeds | 100 mm/min, 150 mm/min (adjustable) |
| Environmental Requirements | 23 ± 2 °C, 20–70 %RH |
| Power Supply | 220 VAC 50 Hz / 120 VAC 60 Hz |
| Dimensions (L×W×H) | 630 × 360 × 230 mm |
| Net Weight | 33 kg |
| Compliance Standards | ISO 8295, GB 10006, ASTM D1894, TAPPI T816 |
| Brand | Labthink |
|---|---|
| Model | BMC-B1 |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Compliance | GB/T 15267–1994 |
| Application | Impact Resistance Testing of Rigid PVC Sheets for Food Packaging |
| Test Principle | Controlled-height steel ball drop onto clamped specimen under standardized conditions |
| Reporting Metric | Percent Breakage Rate (defined as complete separation into ≥2 fragments) |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | PARAM-BOMEI MED-01 |
| Pricing | Upon Request |
| Force Capacity | 250 N (Standard) |
| Optional | 50 N, 100 N, 500 N |
| Customizable | 750 N, 1000 N |
| Accuracy Class | Better than 0.5 |
| Test Speed (Extension/Retraction) | 10, 50, 100, 150, 200, 300 mm/min (Standard) |
| Sample Width | 30 mm (Standard Fixture) |
| Stroke | 600 mm |
| Dimensions (L×W×H) | 851 × 500 × 940 mm |
| Weight | 68 kg |
| Power Supply | 220 VAC 50 Hz / 120 VAC 60 Hz |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | C660B |
| Vacuum Range | 0 to –90 kPa (0 to –13 psi) |
| Vacuum Accuracy | ±0.25% FS |
| Vacuum Resolution | 0.1 kPa / 0.01 psi |
| Vacuum Hold Time | 0–9999 min 59 sec |
| Standard Vacuum Chamber Dimensions | Φ270 mm × 210 mm (H) |
| Power Supply | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz |
| Net Weight | 6.5 kg (host), 9 kg (standard chamber) |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer | Jinan Labthink Electromechanical Technology Co., Ltd. |
| Model | TQD-G1A |
| Pressure Drop Range | 0–1000 Pa |
| Pressure Resolution | 0.1 Pa |
| Pressure Accuracy | ±0.25% FS |
| Flow Rate Range | 0–30 L/min |
| Flow Resolution | 0.1 L/min |
| Flow Accuracy | ±2% FS |
| Test Area | 20 cm² (standard, customizable) |
| Sample Size | 5 cm × 5 cm |
| Max Sample Thickness | 1 mm |
| Gas Supply | Clean compressed air (user-supplied, ≥550 kPa, >120 L/min) |
| Power | 120 VAC ±10% / 60 Hz or 220 VAC ±10% / 50 Hz |
| Dimensions | 300 mm × 460 mm × 520 mm |
| Weight | 25 kg |
| Interface | RS232 (optional software integration) |
| Display | 7" industrial color touchscreen |
| Compliance | ISO 9237, ISO 4638, ISO 5636, GB/T 5453, GB/T 10655, GB/T 4689.22, GB/T 13764, ASTM D737, TAPPI T460, JIS P8117 |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic |
| Model | C230H |
| Pricing | Upon Request |
| Test Principle | Coulometric Oxygen Sensor + Isobaric Method |
| Standards Compliance | ASTM D3985, ASTM F1307, ASTM F1927 (optional), GB/T 19789, GB/T 31354, DIN 53380-3, JIS K7126-2-B, YBB 00082003-2015 |
| Film OTR Range | 0.01–200 cm³/(m²·day) |
| Container OTR Range | 0.00005–1 cm³/(pkg·day) |
| Resolution | 0.001 cm³/(m²·day) |
| Repeatability | ±0.01 cm³/(m²·day) or ±2%, whichever is greater |
| Test Temperature | 10–55 °C (±0.2 °C) |
| RH Control | 0%, 5–90% (±1%), 100% (O₂ side) |
| Test Chambers | 3 independent chambers |
| Sample Size | 108 mm × 108 mm |
| Max Sample Thickness | ≤3 mm |
| Standard Test Area | 50 cm² |
| Carrier Gas | ≥99.999% high-purity N₂ (user-supplied) |
| Inlet Pressure | ≥0.28 MPa (40.6 psi) |
| Gas Interface | 1/8″ stainless steel tubing |
| Max Container Volume | 3 L (optional) |
| DataShield™ Data Integrity Module | Optional |
| GMP-Compliant Software & Audit Trail | Optional |
| 21 CFR Part 11 Compliance Support | Optional |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | HST-H3 Dual-Head Independent Temperature-Controlled Heat Sealer |
| Price Range | USD 1,400 – 8,500 |
| Heat Seal Temperature Range | Ambient to 300 °C |
| Temperature Control Accuracy | ±0.2 °C |
| Seal Time Range | 0.1–999.9 s |
| Seal Pressure Range | 0.05–0.7 MPa |
| Seal Jaw Dimensions | 330 mm × 10 mm (customizable) |
| Heating Mode | Single or Dual Independent Heating |
| Pneumatic Supply Requirement | 0.5–0.7 MPa |
| Air Inlet Fitting | Φ6 mm Polyurethane Tubing |
| Overall Dimensions | 536 mm (L) × 335 mm (W) × 413 mm (H) |
| Power Supply | AC 220 V, 50 Hz |
| Net Weight | 43 kg |
| Compliance Standards | QB/T 2358, ASTM F2029, YBB00122003 |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Labthink FT-F1 |
| Temperature Range (Hot Chamber) | Ambient to 150 °C (optional up to 280 °C) |
| Hot Chamber Temperature Stability | ±0.1 °C at 150 °C |
| Cold Chamber Temperature Range | 0–100 °C |
| Cold Chamber Temperature Stability | ±0.1 °C |
| Hot Chamber Dimensions (L×W×H) | 670 × 490 × 540 mm |
| Cold Chamber Dimensions (L×W×H) | 400 × 220 × 520 mm |
| Test Stations | 6 (simultaneous sample + blank testing) |
| Compliance | ASTM D5330, ISO 6452, DIN 75201, SAE J1756, GB/T 27630 |
| Brand | Labthink |
|---|---|
| Model | GHS-03 |
| Origin | Shandong, China |
| Manufacturer | Labthink Instruments Co., Ltd. |
| Application | Heat seal parameter optimization for flexible packaging films and laminates |
| Heat Seal Temperature Range | 25–250 °C |
| Temperature Control Accuracy | ±0.2 °C |
| Temperature Gradient Across Five Stations | ≤20 °C |
| Heat Seal Pressure Range | 0.1–0.7 MPa |
| Heat Seal Time Range | 0.1–999.9 s |
| Sealing Surface Dimensions | 40 mm × 10 mm × 5 stations |
| Power Supply | AC 220 V, 50 Hz |
| Net Weight | 72 kg |
| Dimensions (L×W×H) | 576 × 430 × 510 mm |
| Compressed Air Requirement | 0.1–0.7 MPa via Ø8 mm polyurethane tubing (user-supplied) |
| Brand | Labthink |
|---|---|
| Model | MED-01 |
| Force Range | 250 N (standard) |
| optional | 50 N, 100 N, 500 N |
| customizable | 750 N, 1000 N |
| Accuracy | Better than Class 0.5 per ISO 376 |
| Test Speed (Approach/Return) | 10, 50, 100, 150, 200, 300 mm/min (standard) |
| Sample Width | 30 mm (standard fixture), 50 mm (optional) |
| Sample Holder | Manual clamping |
| Maximum Travel | 600 mm |
| Dimensions (L×W×H) | 851 × 500 × 940 mm |
| Power Supply | 220 VAC 50 Hz / 120 VAC 60 Hz |
| Net Weight | 68 kg |
| Compliance | GB 2637–2014, YBB 00332002–2015 |
| Brand | Labthink |
|---|---|
| Model | C230H |
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Price Range | USD 14,000 – 85,000 |
| Test Principle | Isobaric Method with Coulometric Oxygen Sensor |
| Standards Compliance | ASTM D3985, ASTM F1307, ASTM F1927 (optional), GB/T 19789, GB/T 31354, DIN 53380-3, JIS K7126-2-B, YBB 00082003-2015 |
| Test Range | 0.01–200 cm³/(m²·day) [film] |
| Resolution | 0.001 cm³/(m²·day) |
| Repeatability | ±0.01 cm³/(m²·day) or ±2%, whichever is greater |
| Temperature Control | 10–55 °C (±0.2 °C) |
| Humidity Control | 0–90% RH (±1% RH), 100% RH (optional) |
| Test Chambers | 3 independent chambers |
| Sample Area | 50 cm² (standard) |
| Max. Sample Size | 108 mm × 108 mm |
| Max. Thickness | ≤3 mm |
| Package Testing Capacity | up to 3 L |
| Carrier Gas | ≥99.999% high-purity N₂ |
| Inlet Pressure | ≥0.28 MPa (40.6 psi) |
| Gas Interface | 1/8″ stainless steel tubing |
| Optional Features | DataShield™ Data Integrity System, CFR 21 Part 11 Compliance Module, GMP Computer System Validation Support, Package Testing Mode |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | C360H |
| Testing Methods | Gravimetric Gain & Loss Modes |
| Maximum WVTR (Loss Mode) | 10,000/n g/(m²·day) (n = 1–12) |
| Maximum WVTR (Gain Mode) | 1,200 g/(m²·day) per station |
| Test Stations | 12 |
| Temperature Range | 20–55 °C ±0.2 °C |
| Humidity Range | 10–90 %RH ±1 %RH |
| Sample Diameter | Φ74 mm |
| Sample Thickness | ≤3 mm |
| Test Area | 33 cm² |
| Carrier Gas | Compressed Air (≥0.6 MPa) |
| Desiccant System | Core-free Long-life Dryer (20,000 h service life) |
| Humidification | Fog-free Integrated Humidifier |
| Data Management | DataShield™ Audit-Trail-Enabled Software |
| Regulatory Options | Optional 21 CFR Part 11 Compliance Package |
| GMP Computer System Validation Support | Optional |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer | Jinan Labthink Electromechanical Technology Co., Ltd. |
| Model | QYC-E |
| Material | ASTM F86-compliant 316 stainless steel (body, sealing bolts, base feet) |
| Contact Configuration | Single- or double-sided exposure |
| Single-Side Exposure Area | 100 cm² (Φ112.8 mm) |
| Double-Side Exposure Area | 200 cm² |
| Cell Volume | 200 mL |
| Operating Temperature Range | 5 °C to 180 °C |
| Dimensions (L×W×H) | 175 mm × 140 mm × 63 mm |
| Net Weight | 2.3 kg |
| Compliance | GB 5009.156–2016, GB 31604.1–2015, EN 13130-1:2004 Annex D, Figure D.6 (Migration Test Cell C) |
Show next