Other Industry Specialized Instruments
Filter
Showing 421–450 of 894 results
| Brand | JKRD |
|---|---|
| Origin | USA |
| Model | BGC-4500 |
| Detection Principle | Gas Chromatography with Thermal Conductivity Detection (TCD) |
| Sample Interface | Direct Pipeline Coupling |
| Analysis Cycle | <10 min |
| Quantitative Repeatability | RSD ≤ 1% |
| Temperature Control Accuracy | ±0.1°C |
| Operating Environment | 5–50°C, 10–85% RH |
| Power Supply | AC 220 V / DC 12 V / 24 V |
| Carrier Gas | High-Purity H₂ (≥99.995%), 0.3 MPa |
| Certified Standards Compliance | GB/T 13610–2020, GB/T 11062–2014, GB/T 12206–2006, ASTM D1945, ISO 6974–2, EN 16726 |
| Data Output Protocol | Modbus RTU |
| Software Features | Real-time Wobbe Index, Higher/Lower Heating Value (HHV/LHV), Density, Relative Density, Combustion Potential Calculation |
| Detector Sensitivity | TCD S ≥ 4500 mV·mL/mg (benzene), Noise ≤ 0.02 mV |
| Column | 3 mm ID Passivated Stainless Steel Capillary Column |
| Valve System | Imported VICI 10-Port Rotary Valve (≥5×10⁶ actuation cycles) |
| Sample Requirements | Dust-free, Water-free, Oil-free Gas Stream |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | ABT-85 |
| Temperature Range | −70 °C to +20 °C |
| Temperature Stability | ±0.05 °C to ±0.1 °C |
| Display | 5.7″ TFT Touchscreen (0.01 °C resolution) |
| Heating Power | 6 kW |
| Refrigeration Capacity | 2.5 kW @ 20 °C |
| Pump Flow Rate | 35–80 L/min |
| Pump Pressure | 0.48–3.2 bar |
| Compressor | Two-stage, air-cooled |
| Heat Exchanger | Integrated secondary circuit |
| Circulation Pump | Dual-stage, intelligent pressure control |
| Thermal Fluid | Thermal HL80 |
| Dimensions (W×D×H) | 61 × 108 × 125 cm |
| Sealing | Hydraulic seal compatible with glycol-based heat transfer fluids |
| Communication Interfaces | RS485, Ethernet, Modbus TCP, optional remote control unit |
| Brand | JULABO |
|---|---|
| Model | APT-50 |
| Origin | Germany |
| Temperature Range | –25 °C to +110 °C |
| Temperature Stability | ±0.05 °C to ±0.1 °C |
| Display | 5.7″ TFT Touchscreen, 0.01 °C Resolution |
| Heating Power | 6 kW |
| Cooling Power | 7.5 kW @ 20 °C |
| Pump Flow Rate | 35–76 L/min |
| Maximum Pump Pressure | 3.2 bar |
| Primary Circulation Pump | Integrated High-Performance Dynamic Pump |
| Heat Exchanger | Single-stage, Water-Cooled Compressor System |
| Fluid Compatibility | Glycol/Water Mixtures & Other Inert Heat Transfer Media |
| Dimensions (W×D×H) | 53 cm × 66.5 cm × 126 cm |
| Compliance | CE, RoHS, ISO 9001 Design Principles |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | DCD / DCD-45 / DCD-50 |
| Temperature Range | −35 °C to +95 °C |
| Flow Rate | 1–30 L/min |
| Temperature Stability | ±0.01 °C to ±0.1 °C |
| Display | 5.7″ TFT Touchscreen (0.01 °C resolution) |
| Heating Power | 5–6 kW |
| Cooling Power (at 20 °C) | 3.5–7.5 kW |
| Pump Flow | 35–76 L/min |
| Pump Pressure | 0.48–3.2 bar |
| Compressor Type | Single-stage, air-cooled or water-cooled |
| Heat Exchanger | Secondary circuit equipped on DCD-45/DCD-50 |
| Circulating Medium | Automotive-grade antifreeze |
| Dimensions (W×D×H) | 33×59×67 cm (DCD), 53×66.5×126 cm (DCD-45/DCD-50) |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | DD-1201F-BF |
| Temperature Range | −40 to +100 °C |
| Temperature Stability | ±0.01 °C |
| Heating Power | 2 kW |
| Cooling Capacity | 1250 W at 20 °C, 1100 W at −20 °C, 540 W at −40 °C |
| Circulation Pump Flow Rate | 8–27 L/min |
| Pump Pressure | 0.1–0.7 bar |
| Bath Opening × Depth (W×L/D) | 35 × 40 × 30 cm |
| Bath Volume | 45–56 L |
| Sample Capacity | 20 bottles |
| Measurement Positions | 20 |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | ECP-50 |
| Temperature Range | –35 °C to +90 °C |
| Flow Rate | 5–40 L/min |
| Temperature Stability | ±0.05 °C to ±0.1 °C |
| Display | 5.7″ TFT Touchscreen (0.01 °C resolution) |
| Heating Power | 6 kW |
| Refrigeration Capacity | 7.5 kW @ 20 °C |
| Pump Pressure | 0.48–3.2 bar |
| Circulation Medium | Antifreeze-compatible |
| Compressor Type | Single-stage, water-cooled |
| Dimensions (W×D×H) | 53 × 66.5 × 126 cm |
| Integrated Features | EHC segmented shock heat exchange, ACC dynamic refrigeration control, ICC intelligent temperature control, hydraulic sealing, rear-mounted fluid connections, front-panel operation, loop filter, multi-protocol communication interfaces |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | NEM / NEM-50 / NEM-92 |
| Temperature Range | −20 to +90 °C (NEM-50) / −40 to +150 °C (NEM-92) |
| Flow Rate | 9–26 L/min |
| Temperature Stability | ±0.05 to ±0.1 °C (NEM-50) / ±0.05 to ±0.2 °C (NEM-92) |
| Display | 5.7″ TFT touchscreen, 0.01 °C resolution |
| Heating Power | 6 kW (NEM-50) / 12 kW (NEM-92) |
| Cooling Power @20 °C | 7.5 kW (NEM-50) / 25 kW (NEM-92) |
| Pump Flow | 35–76 L/min (NEM-50) / 26–80 L/min (NEM-92) |
| Pump Pressure | 0.48–3.2 bar (NEM-50) / 0.5–3.0 bar (NEM-92) |
| Compressor | Single-stage water-cooled (NEM-50) / Two-stage water-cooled (NEM-92) |
| Heat Exchanger | Not equipped (NEM-50) / Equipped (NEM-92) |
| Secondary Circulation Pump | Not equipped (NEM-50) / Equipped (NEM-92) |
| Heat Transfer Fluid | Antifreeze (Thermal HL60) |
| Dimensions (W×D×H) | 53×66.5×126 cm (NEM-50) / 95×127×190 cm (NEM-92) |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | PMC-40 / PMC-85 |
| Temperature Range | −30 to +150 °C (PMC-40) / −50 to +180 °C (PMC-85) |
| Flow Rate | 5–12 L/min |
| Temperature Stability | ±0.01 to ±0.05 °C (PMC-40) / ±0.05 to ±0.1 °C (PMC-85) |
| Display | 5.7″ TFT touchscreen, 0.01 °C resolution |
| Heating Power | 2.7 kW (PMC-40) / 6 kW (PMC-85) |
| Refrigeration Capacity | 1.2 kW @ 20 °C (PMC-40) / 2.5 kW @ 20 °C (PMC-85) |
| Pump Flow Range | 16–40 L/min (PMC-40) / 35–80 L/min (PMC-85) |
| Pump Pressure | 0.3–1.7 bar (PMC-40) / 0.48–3.2 bar (PMC-85) |
| Compressor Type | Single-stage air-cooled (PMC-40) / Two-stage air-cooled (PMC-85) |
| Heat Transfer Fluid | Thermal HL60 |
| Dimensions (W×D×H) | 33×59×67 cm (PMC-40) / 61×108×125 cm (PMC-85) |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | TMS-50 / TMS-92 |
| Temperature Range | −20 to +90 °C (TMS-50), −40 to +150 °C (TMS-92) |
| Temp. Stability | ±0.05 to ±0.1 °C (TMS-50), ±0.05 to ±0.2 °C (TMS-92) |
| Display | 5.7″ TFT, 0.01 °C resolution |
| Heating Power | 6 kW (TMS-50), 12 kW (TMS-92) |
| Cooling Power @20 °C | 7.5 kW (TMS-50), 25 kW (TMS-92) |
| Flow Rate | 35–76 L/min (TMS-50), 26–80 L/min (TMS-92) |
| Pump Pressure | 0.48–3.2 bar (TMS-50), 0.5–3.0 bar (TMS-92) |
| Compressor | Single-stage water-cooled (TMS-50), Two-stage water-cooled (TMS-92) |
| Heat Transfer Fluid | Antifreeze (Thermal HL60) |
| Dimensions (W×D×H) | 53×66.5×126 cm (TMS-50), 95×127×190 cm (TMS-92) |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | WCS / WCS-45 / WCS-50 |
| Temperature Range | –35 °C to +90 °C |
| Flow Rate | 2–76 L/min |
| Temperature Stability | ±0.01 °C to ±0.1 °C |
| Display | 5.7″ TFT touchscreen (0.01 °C resolution) |
| Heating Power | 5–6 kW |
| Refrigeration Power (at 20 °C) | 3.5–7.5 kW |
| Pump Pressure | 0.48–3.2 bar |
| Compressor Type | Single-stage, air-cooled or water-cooled |
| Heat Exchanger | Integrated secondary circuit (WCS-45/WCS-50) |
| Circulating Medium | Antifreeze-compatible |
| Communication Interfaces | RS485, Ethernet, Modbus TCP, optional remote control unit |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AA-GWR250 |
| Pricing | Available Upon Request |
| Test Chamber Area | 8.0 cm² |
| Sample Volume | 10 mL |
| Pressure Range | 0–30 psi (0–2.07 bar) |
| Pressure Control Accuracy | ±1% of full scale |
| Input Air Supply | 80–100 psi (5.5–7.0 bar) |
| Power Supply | 220 V AC |
| Timer Range | 0.1–9990 s (LCD digital display) |
| Net Weight | 18 lbs (8.2 kg) |
| Dimensions (H × W × D) | 10 × 10 × 7 in (254 × 254 × 178 mm) |
| Brand | Kaufman & Robinson (KRi) |
|---|---|
| Origin | USA |
| Model | eH Series |
| Type | Ungridded End-Hall Ion Source |
| Operating Principle | Magnetron-sustained plasma discharge with axial magnetic field and radial electric field |
| Typical Ion Energy Range | 20–150 eV |
| Max. Beam Current | Up to 2.5 A (dependent on gas, pressure, and geometry) |
| Gas Compatibility | Ar, Xe, O₂, N₂, CF₄, and other process gases |
| Cooling | Water-cooled anode and cathode assembly |
| Mounting Flange | Conflat (CF) 63 or CF 100 standard |
| Compliance | Designed for integration into UHV and HV vacuum systems per ISO 3529-2, ASTM F1875, and SEMI S2/S8 safety guidelines |
| Brand | Kaufman |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RFICP |
| Pricing | Upon Request |
| Discharge Type | RF (Radio Frequency) |
| Anode Configuration | RF Electrode |
| Beam Current Range | 100–1500 mA |
| Ion Kinetic Energy | 100–1200 V |
| Grid Diameter | 4–30 cm |
| Beam Modes | Focused, Collimated, Divergent |
| Gas Compatibility | Ar, Kr, Xe, O₂, N₂, H₂, and other process gases |
| Operating Pressure | < 0.5 mTorr |
| Neutralizer | LFN-2000 |
| Length | 12.7–39 cm |
| Diameter | 13.5–59 cm |
| Flow Rate | 3–50 sccm |
| Brand | KEYENCE |
|---|---|
| Origin | Japan |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | MD-X1000/1500 Series |
| Peak Power | 200 kW |
| Average Output Power | 25 W |
| Laser Architecture | Hybrid YVO₄–Fiber Oscillator |
| Scanning Axes | X, Y, Z (simultaneous 3-axis galvanometric control) |
| Focus Adjustment | Motorized Z-axis with auto-focus via integrated camera |
| Integrated Vision | High-resolution monochrome CMOS camera with depth-sensing capability |
| QR Code Reading | Built-in ISO/IEC 15415-compliant decoder with grade-based print quality assessment |
| Compliance | CE, FDA 21 CFR Part 11 (audit trail & electronic signature ready), ISO 9001-aligned manufacturing |
| Brand | Kaufman & Robinson, Inc. (KRi) |
|---|---|
| Origin | USA |
| Model | EH200 |
| Type | End-Hall Ion Source |
| Application | Ion Beam Etching (IBE), Pre-deposition Substrate Cleaning, Ion-Assisted Deposition (IBAD), Ion Beam Sputtering (IBS), Direct Ion Plating (DIP) |
| Operating Gas | Argon (Ar), Oxygen (O₂), Nitrogen (N₂), or mixtures |
| Typical Beam Voltage | 50–1,200 V |
| Typical Beam Current | 0.1–4.0 A |
| Nominal Beam Power | Up to 3.5 kW |
| Ion Beam Diameter (at 10 cm) | ~80–120 mm |
| Cooling | Conduction-cooled (water-cooled optional) |
| Interface | CF-63 or CF-100 flange mount |
| Control | Analog 0–10 V / 4–20 mA or RS-232/RS-485 (with optional digital controller) |
| Compliance | CE-marked |
| Brand | KRI (Kaufman & Robinson, Inc.) |
|---|---|
| Origin | USA |
| Model | EH1020F |
| Type | End-Hall Ion Source (Ungridded Hall-Effect Ion Source) |
| Beam Current Range | 0.1–2.5 A (adjustable) |
| Operating Voltage | 50–150 V (DC) |
| Gas Compatibility | Ar, O₂, N₂, Xe, or mixed gases |
| Typical Anode Power | 50–300 W |
| Cooling | Conduction-cooled (water-cooling optional) |
| Flange Interface | CF-63 or CF-100 (customizable) |
| Lifetime | >10,000 hours (under nominal operating conditions) |
| Compliance | CE-marked, RoHS-compliant, compatible with UHV and HV vacuum systems (≤1×10⁻⁷ mbar base pressure) |
| Brand | KRI (Kaufman & Robinson, Inc.) |
|---|---|
| Origin | USA |
| Model | RFICP 140 |
| Anode RF Power | 1 kW @ 1.8 MHz |
| Max. Beam Current | >500 mA |
| Acceleration Voltage Range | 100–1200 V |
| Ion Energy Range | 100–1200 eV |
| Beam Aperture Diameter | 14 cm |
| Grid Material | Molybdenum or Graphite |
| Gas Compatibility | Ar, O₂, N₂, and other process gases |
| Gas Flow Rate | 5–40 sccm |
| Operating Pressure | < 0.5 mTorr |
| Neutralizer | LFN 2000 |
| Dimensions (H × D) | 25.1 cm × 24.6 cm |
| Flange | 12″ Conflat (CF) |
| Brand | KRI (Kaufman) |
|---|---|
| Origin | USA |
| Model | RFICP 200 HO |
| Discharge Type | RF Inductive |
| Filamentless Operation | Yes |
| RF Power Input | >1 kW |
| Ion Optics | OptiBeam™ Grid Assembly |
| Grid Configuration | Application-Specific, Self-Aligning |
| Neutralizer | Integrated (Optional) |
| Cooling | Water-Cooled |
| Beam Options | Collimated, Convergent, Divergent |
| Compliance | Designed for UHV-compatible vacuum systems (≤1×10⁻⁷ Torr operating base pressure) |
| Brand | KRI (Kaufman & Robinson, Inc.) |
|---|---|
| Origin | USA |
| Model | RFICP 220 |
| Anode RF Power | 2 kW @ 2 MHz |
| Max. Beam Current | >1000 mA |
| Beam Energy Range | 100–1200 eV |
| Operating Gases | Ar, O₂, N₂, and other process gases |
| Gas Flow Rate | 5–50 sccm |
| Chamber Pressure | <0.5 mTorr |
| Grid Diameter | 22 cm |
| Grid Material | Molybdenum |
| Beam Optics | OptiBeam™ self-aligning ion optics |
| Neutralizer | LFN 2000 or MHC 1000 |
| Dimensions (H × D) | 30 cm × 41 cm |
| Flange | 10" ConFlat (CF) |
| Brand | Kaufman & Robinson, Inc. (KRI) |
|---|---|
| Origin | USA |
| Model | RFICP 325 |
| Type | RF Inductively Coupled Plasma Ion Source |
| Grid Configuration | E22 Gridded |
| Beam Coverage | Up to 1650 mm substrate holder diameter |
| Application | Ion Beam Assisted Deposition (IBAD) and Pre-deposition Substrate Cleaning |
| Brand | KRI (Kaufman & Robinson, Inc.) |
|---|---|
| Origin | USA |
| Model | RFICP40 |
| Ion Beam Current | Up to 1.2 A (typical, scalable by aperture and gas flow) |
| Operating Gases | Ar, O₂, N₂, Xe, or mixtures |
| RF Frequency | 13.56 MHz |
| Nominal Beam Energy Range | 50–1500 eV (adjustable via extraction voltage) |
| Extraction Aperture Diameter | 40 mm |
| Vacuum Compatibility | ≤5×10⁻⁴ Torr (base pressure), ≥1×10⁻³ Torr (operational) |
| Cooling | Water-cooled anode and cathode assembly |
| Compliance | CE-marked, RoHS-compliant, compatible with ISO 9001-certified vacuum integration workflows |
| Brand | Labman |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AutoResist Pro |
| Pricing | Available Upon Request |
| Brand | Labman |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Basic Coating Dispensing System |
| Pricing | Upon Request |
| Brand | PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-1400 |
| Max. Compression Force | Not Specified |
| Production Rate | 140 tablets/min (variable speed) |
| Die Cavity Diameter Range | 3–20 mm (interchangeable tooling) |
| Construction | 304 stainless steel frame |
| Compliance | Designed to meet core GMP operational requirements for laboratory-scale solid dosage form development |
| Mobility | Integrated casters |
| Drive System | Built-in motorized drive |
| Optional Accessories | Hopper extension, custom-shaped punch sets |
| Control Mode | Fully automated, push-button + jog-reverse function |
| Brand | Labsphere |
|---|---|
| Model | CSTM-QES |
| Origin | Shanghai, China |
| Excitation Wavelengths | 308, 365, 405, 455, 535, 590, 740 nm |
| Integration Sphere Diameter | 6 inch (152 mm) |
| Internal Coating | Spectraflect® |
| Excitation Spot Size | ≤6 mm diameter at 7 mm working distance |
| Spectrometer | CDS2600 (350–1050 nm, 1 nm spectral resolution) |
| NIST-Traceable Calibration Standard | 2Pi-1-INT-050 |
| Sample Types | Thin films, powders, liquid solutions |
| Measurement Mode | DC (steady-state) |
| Software | Custom-developed PLQE analysis suite supporting direct and AM (Absorption-Modified) methods |
| Compliance | NIST-traceable radiometric calibration, ISO/IEC 17025-aligned measurement traceability framework |
| Brand | Labsphere |
|---|---|
| Model | HELIOS-A |
| Origin | USA |
| Light Source Technology | Electrodeless Plasma Lamp (Primary), Halogen & Xenon Options |
| Spectral Range | 250–2500 nm |
| Color Temperature Range | 3000 K–5300 K (Plasma), 3000 K–6500 K (Xenon), Customizable |
| UV Coverage | Yes (<380 nm) |
| Output Stability | <±0.5% over 1 hour (typical) |
| Dynamic Range | >150 dB (23-bit effective) |
| Calibration Traceability | NIST-traceable spectral irradiance |
| Trigger Mode | Continuous (Steady-State) |
| Compliance | ASTM E927-23, ISO 9022-11, IEC 60904-9 Ed. 3, MIL-STD-810H optical testing sections |
| Brand | Labsphere |
|---|---|
| Model | QES |
| Origin | USA |
| Type | Integrating Sphere-Based Monochromatic Light Source for Quantum Efficiency Testing |
| Measurement Mode | DC |
| Calibration Traceability | NIST-Traceable Spectral Irradiance and Radiance |
| Software Interface | SDK Available for Custom Test Sequence Development |
| Compliance Context | Designed to support ISO 15739, ISO 17850, and ASTM E2724-compliant QE characterization workflows |
| Key Applications | CMOS/CCD Image Sensor QE Mapping, Spectral Responsivity Validation, Pixel-Level Linearity Assessment, Module-Level Uniformity Analysis |
| Brand | Moon-BJ |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | UV-2000S |
| Price Range | USD 14,000 – 28,000 |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | MidiLab9000-E/P/T |
| Pricing | Available Upon Request |
| Brand | Labthink |
|---|---|
| Model | C610B |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Quotation | Upon Request |
| Sensor Capacity | 10 N (2 units standard: vertical lift + lateral clamping) |
| Force Accuracy | Class 0.5 |
| Display Resolution | 0.001 N |
| Test Speed Range | 1–600 mm/min (adjustable) |
| Speed Accuracy | ±0.5% of set value |
| Specimen Count per Test | 1 |
| Water Bath Temperature Control Range | Ambient to 40 °C |
| Friction Cycle Count | 1–99 cycles |
| Normal Clamping Force Range | 0–10 N (adjustable) |
| Vertical Stroke | 950 mm |
| Specimen Travel Distance | >150 mm |
| Clamping Method | Pneumatic (vertical), Electromechanical (lateral) |
| Air Supply Requirement | 0.5–0.7 MPa, Ø4 mm polyurethane tubing (user-supplied) |
| Dimensions (L×W×H) | 450 × 450 × 1410 mm |
| Weight | ~95 kg |
| Power Supply | 220 VAC ±10%, 50 Hz OR 120 VAC ±10%, 60 Hz (dual-voltage compatible) |