Physical Property Testing Instruments
Filter
Showing 1321–1350 of 12272 results
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | GJW-50E |
| Breakdown Voltage Range | 0–50 kV AC/DC |
| Input Voltage | AC 220 V ±10%, 50 Hz ±1% |
| Output Power | 1.2 kVA |
| Voltage Measurement Accuracy | ≤3% |
| Ramp Rate | 0.4–10 kV/s |
| Hold Time Range | 0–4 h (no-current condition) |
| Output Current | 60 mA |
| Dimensions (L×W×H) | 630×520×760 mm |
| Weight | 100 kg |
| Environmental Requirements | 23±2°C, RH 50% |
| Grounding Resistance | ≤4 Ω |
| Safety Interlocks | Six-level high-voltage cutoff (main power, keyed HV disconnect, autoreturn transformer switch, chamber door switch, input current limiter) |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | GJW-50E |
| Output Voltage | AC/DC 0–50 kV |
| Power Output | 3 kVA |
| Measurement Range | AC/DC 1–50 kV |
| Accuracy | ≤2% |
| Ramp Rate | 0.25–5 kV/s |
| Hold Time | 0–4 h |
| Leakage Current Setting | 1–30 mA |
| Dimensions (L×W×H) | 770×650×1050 mm |
| Weight | 100 kg |
| Input | AC 220 V ±10%, 50 Hz ±1% |
| Operating Environment | 15–30 °C, RH ≤85% |
| Grounding Depth Requirement | ≥1.5 m |
| Compliance | GB 1408.1–2006, GB 1408.2–2016, JJG 795–2016, ASTM D149, GB/T 1695–2005, GB/T 3333, GB 12913–2008 |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | GJW-50KV |
| Output Voltage | AC/DC 0–50 kV |
| Measurement Range | 5–50 kV |
| Voltage Accuracy | ≤4% |
| Rise Rate | 0.4–10 kV/s |
| Hold Time | 0–4 h (no-load) |
| Leakage Current Setting | 1–30 mA |
| Power Input | AC 220 V ±10%, 50 Hz ±1% |
| Rated Capacity | 3 kVA |
| Dimensions (L×W×H) | 630×520×760 mm |
| Weight | 100 kg |
| Operating Temperature | 15–30 °C |
| Relative Humidity | 0–85% RH |
| Grounding Depth Requirement | ≥1.5 m |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | GZRM-XII45 |
| Pricing | Available Upon Request |
| Lamp Power Options | 1800 W, 2500 W, 4500 W, 7500 W |
| Spectral Filtering Configurations | Borosilicate/Borosilicate, Borosilicate/Soda-Lime, Quartz/Borosilicate, Quartz/Quartz, Lithium-Quartz/Quartz, Quartz/Long-Pass (Ford FLTM B0-116-01), etc. |
| Irradiance Control Range | 0.21–2.05 W/m² @ 340 nm |
| Typical Test Standards Compliance | ISO 105-B02/B06, AATCC TM16, ASTM G155, SAE J2412/J2527, VDA 75202, Ford FLTM B0-116-01, GB/T 16422.2, IEC 60068-2-9 |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | JJ-20B |
| Impact Energy | 4 J (Charpy), 5.5 J (Izod) |
| Impact Velocity | 2.9 m/s (Charpy), 3.5 m/s (Izod) |
| Pendulum Torque (Impact Constant) | 2.1436 N·m, 1.0718 N·m, 0.5359 N·m (for simply supported beam configurations) |
| Load Cell Range | 4 J / 5.5 J |
| Maximum Pendulum Lift Angle | 150° |
| Sampling Rate | 1.2 µs |
| A/D Resolution | 1/65536 |
| Span Options (Charpy) | 40 mm, 60 mm, 62 mm, 70 mm, 95 mm |
| Specimen Dimensions (Charpy) | 4×6×50 mm, 4×10×80 mm, 10×15×120 mm, 13×13×120 mm |
| Specimen Dimensions (Izod) | 4×10×80 mm, (3.2–12.7)×12.7×63.5 mm |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | JJ-300 |
| Impact Energy Capacity | 300 J / 150 J |
| Standard Compliance | GB/T 229–2007, GB 3808 |
| Load Measurement Range | 20,000 N |
| Load Sampling Rate | 1.2 µs |
| Load Resolution | 1/4000 |
| Load Accuracy | ≤1% |
| Angular Displacement Resolution | 360°/10,000 |
| Impact Velocity | 5.0–5.5 m/s |
| Striking Edge Radius | R2–R2.5 mm, Included Angle: 30° ±1° |
| Anvil Span | 40 ±0.5 mm |
| Specimen Dimensions | 55 ±0.6 mm (L) × 10 ±0.1 mm (W) × 10 ±0.05 mm (thickness, unnotched) or 8 ±0.05 mm (remaining thickness, V-notch) |
| Low-Temperature Chamber Range | Ambient to –20 °C |
| Cooling Rate | 0.7–1.0 °C/min |
| Temperature Uniformity | ±2 °C |
| Data Acquisition | High-speed load + angular displacement dual-channel synchronized sampling |
| Software Platform | Proprietary impact analysis suite with curve visualization, energy integration, and comparative reporting |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | JJ-4 |
| Instrument Type | Pendulum Impact Tester |
| Impact Energies | 2 J, 4 J, 7.5 J, 11 J, 15 J, 22 J, 25 J, 50 J, 2.75 J, 5.5 J |
| Impact Velocities | 2.9 m/s, 3.5 m/s, 3.8 m/s |
| Pendulum Torques (Impact Constants) | 0.5359 N·m, 1.0718 N·m, 1.4737 N·m, 2.1436 N·m, 2.9474 N·m |
| Load Cell Range | 50 J |
| Maximum Pendulum Lift Angle | 150° |
| Sampling Rate | 10 µs |
| Resolution | 1/4096 (load), 1/65536 (angular position) |
| Load Accuracy | ≤1% |
| Hammer Nose Angle | 30° (Charpy), 75° (Izod) |
| Nose Radius | 2 mm (Charpy), 0.8 mm (Izod) |
| Support Radius | 1 mm |
| Support Front/Back Angles | 5° / 10° |
| Span Lengths | 40 mm, 60 mm, 62 mm, 70 mm, 95 mm |
| Specimen Dimensions (Charpy) | 80 × 10 × 4 mm, 50 × 6 × 4 mm, 120 × 15 × 10 mm |
| Specimen Dimensions (Izod) | 63.5 × 12.7 × 3.2 mm, 63.5 × 12.7 × 6.4 mm, 63.5 × 12.7 × 12.7 mm, 80 × 10 × 4 mm (standard) |
| Power Supply | AC 220 V, 50 Hz |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | JM-3 |
| Max Impact Energy | 3 J |
| Specimen Dimensions | 100 mm × 100 mm |
| Clamp Aperture Diameters | Φ89 mm, Φ60 mm |
| Punch Diameters | Φ25.4 mm, Φ12.7 mm |
| Pendulum Arm Radius | 300 mm |
| Pendulum Lift Angle | 90° |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | LDS Series |
| Max Load Capacity | 5 kN |
| Load Measurement Accuracy | ±1% |
| Speed Measurement Accuracy | ±1% |
| Force Resolution | 0.1 N |
| Test Speed Range | 10–500 mm/min |
| Display | LCD Interface |
| Control System | Microprocessor-Based with PWM Speed Regulation |
| Data Output | Integrated Thermal Microprinter |
| Compliance | Designed to support ASTM D638, ISO 527, GB/T 1040, and GB/T 228.1 test methods |
| Key | Brand: Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | LDS Series |
| Max Test Force | 5 kN |
| Load Cell Accuracy | ±0.5% |
| Load Accuracy | ±0.5% |
| Speed Accuracy | ±0.5% |
| Speed Range | 0.05–500 mm/min |
| Elongation Measurement Accuracy | ±0.5% |
| Large-Deformation Range | 0–1000 mm |
| Effective Crosshead Travel | 1160 mm |
| Effective Test Width | 420 mm |
| Jaw Spacing (Max) | 860 mm |
| Power Supply | AC 220 V, 2 kW |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model Series | LDS Series Universal Tensile Tester |
| Quotation | Available Upon Request |
| Max Test Load | 2 kN / 5 kN |
| Load Cell Accuracy | ±1% FS |
| Force Accuracy | ±1% FS |
| Speed Accuracy | ±1% |
| Speed Range | 5–500 mm/min |
| Effective Crosshead Travel | 600 mm |
| Force Units | N, kgf, gf |
| Control Mode | Dual-mode (Automatic + Manual) |
| Safety Protection | Overload, overcurrent, overvoltage, undervoltage, overtemperature, upper/lower limit position |
| Data Output | Excel/Word-compatible reports |
| Software | Dedicated tensile testing suite with real-time curve plotting, multi-curve overlay, region zoom, point-wise data extraction, and GLP-compliant audit trail |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | MLW-400A |
| Price | USD 13,800 (FOB China) |
| Temperature Range | Ambient to 400 °C |
| Heating Rate | 1–10 °C/min (adjustable) |
| Temperature Accuracy | ±0.1 °C |
| Pressure Range | 1–50 MPa (±0.5% FS) |
| Force Capacity | 5 kN |
| Pressure Resolution | 0.1 MPa |
| Piston Speed | 0.01–500 mm/min |
| Piston Diameter | φ12 mm (standard) |
| Die Geometry | Capillary dies: 1×5, 1×10, 1×20, 1×40 mm (L/D), tungsten carbide |
| Data Acquisition Rate | >100 Hz |
| Compliance | ISO 11443, HG/T 4300–2012 |
| Software Certification | China Copyright No. 2243448 |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | MLW-400B |
| Instrument Type | Capillary Rheometer |
| Temperature Range | Ambient to 400 °C ±1 °C |
| Heating Rate | 1–6 °C/min (adjustable) |
| Temperature Accuracy | ±0.5 °C (displayed), Resolution: 0.1 °C |
| Piston Diameter | Φ11.28 mm (−0.05 mm / −0.012 mm) |
| Piston Cross-Sectional Area | 1 cm² |
| Pressure Range | 1–50 MPa ±1% |
| Capillary Dies | Φ1 mm × 5 mm, Φ1 mm × 10 mm, Φ1 mm × 20 mm, Φ1 mm × 40 mm |
| Die Material | Tungsten Carbide |
| Power Supply | 220 V, 50 Hz, <400 W |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MLW-400D |
| Instrument Type | Capillary Rheometer |
| Sample Type | High-Viscosity Polymer Melts |
| Sample State | Solid (pre-melt) / Molten State During Test |
| Drive System | Servo Motor–Driven Piston |
| Minimum Piston Speed | 0.001 mm/min |
| Maximum Piston Speed | 500 mm/min |
| Maximum Applied Load | 10 kN |
| Load Resolution | 1 part in 100,000 |
| Pressure Range | 1–50 MPa ±1% |
| Temperature Range | Ambient to 400 °C ±1 °C |
| Heating Rate | 1–10 °C/min, Continuously Adjustable |
| Temperature Accuracy | ±0.5 °C (Display), 0.1 °C Resolution |
| Die Geometry | Ø1×5, Ø1×10, Ø1×20, Ø1×40 mm (L/D = 5, 10, 20, 40) |
| Die Material | Tungsten Carbide |
| Plunger Diameter | φ11.28 mm (−0.012/−0.05 mm tolerance) |
| Plunger Cross-Sectional Area | 1.00 cm² |
| Displacement Measurement Accuracy | ±0.5% |
| Deformation Measurement Accuracy | ±1% |
| Software Compliance | Audit Trail, Data Integrity, Exportable ASCII/CSV Reports |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | MLW-90 |
| Temperature Range | Ambient to 90 °C ±1 °C |
| Heating Rate | 0.5–6 °C/min (adjustable) |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | <±0.5 °C (computer-displayed) |
| Pressure Range | 1–50 MPa ±1% |
| Load Cell Capacity | 500 kg |
| Load Accuracy | ±1% |
| Load Resolution | 20,000 counts |
| Piston Area | 1 cm² |
| Sample Mass | 15 g |
| Sample Density | 1.34 g/cm³ |
| Die Dimensions (ID × L) | φ1.5 mm × 5/10/20/40 mm |
| Die Material | Tungsten Carbide |
| Piston Speed Range | 0.001–100 mm/min |
| Die Quantity | 12 sets included |
| Piston Options | Steel or copper with polyethylene sheathing |
| Heating Method | Water Bath |
| Safety Architecture | Explosion-proof enclosure + operator-isolated control station |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | NBW-500 |
| Motor Power | 0.5 kW |
| Temperature Range | −120 °C to 500 °C |
| Heating Rate | 2 ± 1 °C/min |
| Time Measurement Range | 0.01–9999.99 s |
| Torsional Amplitude Range | 30°–60° |
| Angular Displacement Detection | Optical Encoder-Based |
| Accuracy Class | Grade 1 |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | QYS-96B |
| Instrument Type | Ball Indentation Hardness Tester (not Rockwell) |
| Total Test Force | 961 N |
| Indentation Depth Range | 0.125–0.325 mm |
| Maximum Specimen Height | 30 mm |
| Steel Ball Indenter Diameters | Φ5 mm and Φ10 mm |
| Depth Resolution | 0.001 mm |
| Timing Range | 10–90 s (±0.5% accuracy) |
| Indication Accuracy | ±4% |
| Frame Deformation | ≤0.05 mm |
| Net Weight | 70 kg |
| Dimensions (W×D×H) | 420 × 240 × 640 mm |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | RSW-30K |
| Max Test Load | 30 kN |
| Crosshead Travel | 100 mm |
| Dimensions (L×W×H) | 600 × 450 × 1900 mm |
| Weight | 300 kg |
| Load Frame Type | Electromechanical |
| Compliance | GB/T 16491, GB/T 2611, GB/T 11546.1, GB/T 15048, GB/T 20672, GB/T 1040.1, GB/T 1041, GB/T 9341 |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | WSM-20kN |
| Maximum Test Force | 20 kN |
| Force Accuracy | ±0.5% of reading |
| Force Resolution | 1/300,000 FS |
| Test Speed Range | 0.05–500 mm/min (±0.5% speed accuracy) |
| Displacement Measurement Range | 0–1000 mm (resolution: 0.001 mm |
| accuracy | ±0.5%) |
| Crosshead Travel | 1200 mm |
| Effective Test Width | 400 mm |
| Load Frame Type | Dual-ball-screw, four-column rigid structure |
| Compliance Standards | GB/T 16491–2008, GB/T 2611–2007, ISO 527-1, ISO 604, ISO 178, ASTM D638, ASTM D695, ASTM D790 |
| Software | Windows-based test control & analysis suite with real-time curve plotting, multi-curve overlay, region zoom, data export to Excel/PDF/Word, and GLP-compliant audit trail |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | WZN-I |
| Cutting Width Max | 300 mm |
| Cutting Thickness Max | 15 mm |
| Planar Milling Length Max | 300 mm |
| Cutting Wheel Specification | 200 × 32 × 2 mm |
| Notching Tool Length | 50 mm |
| Dumbbell/Planar Tool Specification | 30 × 12 × 30 mm |
| Overall Dimensions | 1130 × 720 × 950 mm |
| Cutting Spindle Speed | 1400–2800 rpm |
| Notching Spindle Speed | 400 rpm |
| Dumbbell/Planar Spindle Speeds | 470 / 940 / 715 / 1430 rpm |
| Standard Configuration | Main Unit + Dumbbell Template Set |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | ZJL-200A |
| Max Temperature | 350 °C |
| Speed Range | 0.1–120 rpm |
| Torque Range | 0–300 N·m |
| Torque Accuracy | ±0.5% F.S. |
| Pressure Range | 0.1–100 MPa |
| Pressure Accuracy | ±0.5% F.S. |
| Temperature Control | 5-zone, ±1 °C |
| Temp Resolution | 0.1 °C |
| Motor | AC 380 V, 3.0 kW |
| Mixer Volume | 60 mL |
| Extruder Barrel | φ20 mm, L/D = 25:1, 4Cr13 steel |
| Capillary Dies | φ1.27 mm, L/D = 20/1, 30/1, 40/1, 38CrMoAl material |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | ZJL-200A |
| Motor Power | 3.0 kW |
| Speed Range | 0.1–150 rpm |
| Speed Control Accuracy | ±0.5% F.S. |
| Torque Measurement Range | 0–200 N·m |
| Torque Resolution | 0.1 N·m |
| Torque Accuracy | ±0.5% F.S. |
| Frequency Range | 10⁻³–628 rad/s |
| Melt Pressure Range | 0.1–100 MPa |
| Pressure Accuracy | ±0.5% F.S. |
| Temperature Control Range | Ambient to 300 °C (5-zone) |
| Temperature Accuracy | ±1.0 °C |
| Mixer Chamber Capacity | 60 mL |
| Screw L/D Ratio | 25:1 |
| Capillary Dies | Ø1.27 mm, L/D = 20:1, 30:1, 40:1 |
| Dimensions (Host + Mixer or Extruder) | 1600 × 450 × 1300 mm (L×W×H) |
| Supply Voltage | AC 380 V, 6 kW |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZKY-I |
| Pricing | Available Upon Request |
| Motor | 220 V AC, 100 W |
| Feed Resolution | 0.01 mm |
| Worktable Dimensions (L × W) | 140 × 145 mm |
| Tool Stroke | 24 mm |
| Notch Angle | 45° ± 1° |
| Notch Root Radius Options | r = 0.25 ± 0.05 mm or r = 1.0 ± 0.05 mm |
| Tool Length | 50 mm |
| Key | Max Test Load: 80 kN |
|---|---|
| Frequency Range | 0–5 Hz |
| Amplitude Range | 0–160 mm |
| Static Load Accuracy | ±0.5% |
| Frequency Accuracy | ±1% |
| Stroke Resolution | 0.1% ± 0.1 mm |
| Speed Range | 0.2–200 mm/min |
| Max Spring OD | 600 mm |
| Max Spring Height | 500 mm |
| Power Supply | AC 380 V, 100 kW |
| Waveform Options | Sine, Ramp, Square |
| Compliance | GB/T 13061 |
| Brand | Changji Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XRY-1C |
| Measurement Mode | Isoperibol (Constant-Temperature Jacket) |
| Instrument Type | Oxygen Bomb Calorimeter |
| Intelligence Level | Fully Automated with PC Control |
| Temperature Range | 5°C to 35°C |
| Temperature Detection Threshold | 0.001°C – 0.01°C |
| Temperature Resolution | 0.0001°C |
| Temperature Stability | ≤0.001°C per 30 min |
| Temperature Tracking Rate | ~0.01°C/s – 0.05°C/s |
| Single-Sample Test Duration | ~8 min (Standard Mode), ~3 min (Rapid Mode) |
| Bomb Pressure Rating | 20 MPa |
| Pressure Resolution | 0.001 MPa |
| Brand | Changji Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | WNE-1A |
| Temperature Range | 0–100 °C |
| Temperature Accuracy | ±0.2 °C |
| Standard Water Value | (51 ± 1) s |
| Effluent Volume | (200 ± 0.2) mL |
| Heating Power | 550 W (AC 220 V, 50 Hz) |
| Compliance | GB/T 266, GB/T 514, Q/YXYY11 |
| [Origin | Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | CHY-II-17/16 |
| Heating Capacity | 1650 °C / 1750 °C (selectable) |
| Max. Operating Temperature | 1600 °C / 1700 °C |
| Temperature Control Accuracy | ±2 °C during ramp |
| Heating Rate | 0–20 °C/min (programmable) |
| Programmable Ramp Segments | ≥30 |
| Deformation Measurement Range | 0–10 mm |
| Deformation Resolution | ≤0.03 mm |
| Specimen Dimensions | 50 ±0.5 mm height × 36 ±0.15 mm or 50 ±0.35 mm diameter |
| Uniform Temperature Zone Height | ≥75 mm (ΔT ≤20 °C) |
| Applied Load Options | 0.1 MPa, 0.2 MPa |
| Load Application Range | 100–1000 N (digital force display, 1 N resolution) |
| Power Rating | 3.5–6 kW |
| Compliance Standards | YB/T 370, GB/T 5989, ISO 1893:1989] |
| Brand | Charm Sciences |
|---|---|
| Origin | USA |
| Model | ROSA Portable Mycotoxin Detection Kit |
| Certification | USDA-GIPSA & FGIS Approved |
| Detection Targets | Aflatoxin, Deoxynivalenol (DON), Zearalenone (ZEN), T-2/HT-2 Toxins, Ochratoxin A (OTA), Fumonisins |
| Sample-to-Result Time | ≤5 min |
| Format | Lateral Flow Immunoassay (LFIA) |
| Regulatory Alignment | Compliant with AOAC Official Methods, ISO 17025–accredited workflows, USP <1033>, FDA 21 CFR Part 11 (when paired with ROSA Connect software) |
| Consumables Included | Pre-calibrated test cassettes, extraction buffers, centrifuge tubes, pipette tips, portable vortex mixer, digital balance (0.01 g resolution), mini-centrifuge (up to 10,000 rpm), sample grinders, and field-grade PPE kit |
| Brand | Chatillon |
|---|---|
| Origin | USA |
| Model | CS2-225, CS2-1100 |
| Instrument Type | Electromechanical Universal Testing System |
| Compliance | ISO 7500-1, ASTM E4, ASTM D638, ASTM D790, ASTM D1876, ISO 179, ISO 527 |
| Controller | Integrated Android-based Tablet (Dual-Function Touchscreen Interface) |
| Load Capacity Options | 225 N (CS2-225), 1100 N (CS2-1100) |
| Accuracy | ±0.5% of full scale (per ISO 7500-1 Class 1) |
| Resolution | 1/10,000 of full scale |
| Test Speed Range | 0.01–2000 mm/min (adjustable in 0.01 mm/min increments) |
| Data Output | CSV, PDF, XML via USB, Wi-Fi, or Bluetooth |
| Environmental Rating | IP54 (dust and splash resistant) |
| Brand | Chatillon |
|---|---|
| Origin | USA |
| Model | CS2-225 |
| Force Capacity | 225 N (50 lbf) |
| Display | Integrated 7" Android Tablet Controller |
| Output Interface | RS-232 |
| Compliance | ISO 7500-1, ASTM E4, ASTM D638, ASTM D882, ASTM F88, USP <1042> |
| Test Modes | Tensile, Compression, Peel, Bend, Shear, Multi-step, Cyclic, Height-based, Break-point (Percentage or Absolute), Dual-peak Capture |
| Data Export | Automatic CSV via RS-232 |
| Operating Environment | Production Floor & Laboratory |