Particle/Powder Analysis Instruments
Filter
Showing 751–780 of 969 results
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | AS300 Control |
| Operating Principle | Electromagnetic 3D throw motion |
| Max. Sample Load | 6 kg |
| Max. Sieve Stack Mass | 10 kg |
| Sieve Diameter Options | 100 / 150 / 200 / 203 / 305 / 315 mm |
| Measurement Range | 36 µm – 40 mm |
| Amplitude Adjustment | 0.2–>2 mm (digital) |
| Acceleration | 1.0–>10.0 g |
| Timing Range | 1–99 min (digital) |
| Intermittent Mode | 1–99 s |
| Max. Sieve Layers | 9 (standard) / 17 (with extension kit) |
| Programmable Methods | Up to 9 stored protocols |
| Motion Type | Rotational throw with momentum |
| Dry & Wet Sieving | Yes |
| Calibration & Verification Support | Yes |
| Interface | Parallel port |
| Dimensions (W×H×D) | 400 × 235 × 400 mm |
| Net Weight | ~35 kg |
| Compliance | CE-marked, designed per ISO 2591-1, ISO 9276-2, ASTM E11, USP <786> |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | AS400 Control |
| Screening Motion | Horizontal Circular (DIN 53 477) |
| Speed Range | 50–300 rpm (electronically controlled, continuously adjustable) |
| Display | Digital speed & time readout |
| Motor Power | 125 W |
| Max. Sample Load | 5 kg |
| Max. Sieve Stack Mass | 15 kg |
| Max. Number of Sieves | 17 |
| Sieve Diameter Compatibility | 100 mm / 150 mm / 200 mm / 203 mm (8") / 305 mm (12") / 400 mm |
| Sieve Stack Height | up to ~450 mm |
| Measurement Range | 45 µm – 63 mm |
| Acceleration at Sieve Base | 0.04–1.51 g |
| Time Setting Range | 1–99 min (digital) |
| Intermittent Drive Interval | 1–99 s |
| Programmable Methods | Up to 9 stored protocols |
| Calibration | Traceable, certifiable |
| Compliance | CE-marked, compliant with DIN 53 477, ISO 2591-1, ASTM E11 |
| Interface | Parallel port |
| Dimensions (W × H × D) | 540 × 260 × 507 mm |
| Net Weight | ~70 kg |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | AS450 Control |
| Principle | Electromagnetic 3D vibratory sieving |
| Measurement Range | 25 µm – 125 mm |
| Max. Sample Load | 25 kg |
| Max. Sieve Stack Levels | 13 (min. 3) |
| Amplitude Range | 0.2 – >2.2 mm |
| Acceleration | 1–7.1 g |
| Sieving Time | 1–99 min (digital display) |
| Intermittent Mode Interval | 10–99 s |
| Stored SOPs | 9 |
| Sieve Diameter Compatibility | 400 mm / 450 mm |
| Max. Sieve Tower Height | 963 mm |
| Net Weight | ~220 kg |
| Power Supply | Single-phase, CE-compliant |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | AS450 |
| Maximum Sample Load | 20 kg |
| Max. Sieve Stack Mass | 50 kg |
| Sieve Diameter Compatibility | 400 mm / 450 mm |
| Amplitude Range | 0–2.2 mm (digitally adjustable) |
| Oscillation Mode | Three-dimensional throw motion |
| Drive Type | Electromagnetic, intermittent |
| Programmable Methods | 9 stored parameter sets |
| Measurement Range | 20 µm to 125 mm |
| Max. Number of Sieves | 11 (standard) / 14 (with extension kit) |
| Sieve Stack Height | up to ~940 mm |
| Dimensions (W × H × D) | 714 × 435 × 629 mm |
| Net Weight | ~220 kg |
| Compliance | ISO 2591-1, ISO 9276-1, ASTM E11, USP <786> |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | DR100 |
| Feed Rate | 0–5 L/min (infinitely adjustable) |
| Feed Slot Width | 15 mm / 40 mm / 75 mm |
| Feed Slot Length | 210 mm |
| Hopper Capacity | 2.8 L (15/40 mm) / 3.5 L (75 mm) |
| Dimensions (W×H×D) | 260 × 420 × 280 mm |
| Weight | ~10 kg |
| Vibration Frequency | 50/60 Hz |
| Power Supply | 24 W per electromagnet |
| Max. Particle Size | <2 mm (15 mm slot) / <6 mm (40 mm slot) / <12 mm (75 mm slot) |
| Timer | Digital, 1–99 min or continuous operation |
| Compliance | CE certified |
| Maintenance | Maintenance-free design |
| Brand | RETSCH |
|---|---|
| Origin | Germany |
| Model | RD 100 |
| Measurement Principle | Real-time optical dust concentration monitoring via laser scattering |
| Sampling Rate | Up to 1000 measurements per second |
| Compliance | CIPAC MT 171 |
| Dust Index & Dust Area Calculation | Yes |
| Dust Curve Storage | Up to 10 comparative dust release profiles |
| Sample Containment | Sealed sample chamber |
| Interface | Integrated touchscreen display |
| Data Export | CSV/Excel-compatible output |
| User Interface | Standalone operation without external PC required |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | EasySieve |
| Compliance | DIN 66165, ASTM E11, ISO 3310-1, USP <786> |
| Data Export | ASCII, CSV, Excel-compatible |
| Integration | RETSCH “control” series sieve shakers, CAMSIZER®, CRYSTAL-SIZER®, LIMS via EasySieve® Comfort |
| Reporting | Automated DIN-compliant sieve analysis reports with Q₃(x), p₃(x), q₃(x), RRSB parameters, Sauter mean diameter (x₃₂), AFS fineness number, specific surface area (Sᵥ, Sₘ), splinter value, polydispersity index |
| Brand | RETSCH |
|---|---|
| Origin | Germany |
| Model | PT 100 |
| Sample Capacity | ≤ 5000 mL |
| Feed Particle Size | ≤ 10 mm |
| Number of Subsamples | 6 / 8 / 10 |
| Rotational Speed | 110 min⁻¹ |
| Division Time | Digital setting (1, 3, 5, 10–60 min or continuous) |
| Container Volumes | 30 mL / 100 mL / 250 mL / 500 mL |
| Power Supply | 100–240 V, 50/60 Hz |
| Dimensions (W × H × D) | 580 × 910 × 420 mm (including DR 100 feeder) |
| Net Weight | ~33.5 kg |
| Compliance | CE |
| Brand | RETSCH |
|---|---|
| Origin | Germany |
| Model | PT 200 |
| Sample Type | Dry, free-flowing powders and granular materials |
| Dividing Principle | Rotating tube with adjustable slit (DIN 51701 compliant) |
| Division Ratio Range | Continuously adjustable via slit width |
| Output Ports | Up to 3 independent collection outlets |
| Throughput Capacity | Suitable for bulk sample volumes (up to several kg per cycle) |
| Drive | Variable-speed motor-controlled rotation |
| Compliance | DIN 51701, ISO 14887 (sample division for particulate materials) |
| Modular Integration | Compatible with RETSCH DR 100 dust-free feeding unit |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | PT 300 |
| Rotational Speed Range | 18–53 rpm |
| Number of Sample Outlets | 4–10 |
| Feed Mechanism | Vibratory Hopper with Push-in Loading Tray |
| Viewing Window | Integrated Illuminated Observation Port |
| Construction | Modular Stainless Steel Architecture |
| Compliance | Designed in Accordance with ISO 14887 and ASTM D6938 for Representative Sampling of Bulk Granular and Powdered Materials |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | PT 600 |
| Rotational Speed Range | 18–53 rpm |
| Number of Subsamples per Cycle | 4–10 |
| Feed Mechanism | Vibratory Hopper with Push-in Loading Tray |
| Sample Port Configuration | Gravity-fed, Bottom-discharge Funnel System |
| Viewing Window | Integrated Illuminated Observation Port |
| Compliance | Designed in accordance with ISO 13320, ISO 14887, and ASTM D6938 for representative sampling of dry granular and powdered materials |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | PT100 |
| Sample Division Principle | Rotating Cone Divider (Rotary Splitter) |
| Dividing Ports | 6, 8 or 10 |
| Rotation Speed | 110 rpm (electronically regulated, load- and frequency-independent) |
| Maximum Feed Size | ≤10 mm |
| Batch Capacity | Up to 5000 mL |
| Container Options | 100 mL, 250 mL or 500 mL wide-neck or Duran® laboratory bottles |
| Timer Range | 1–60 min or continuous operation |
| Dimensions (W×H×D) | 580 × 910 × 420 mm (including optional DR 100 dosing unit) |
| Net Weight | ~33.5 kg |
| Compliance | CE-marked |
| Maintenance | Maintenance-free drive |
| Noise Level | Low-noise operation |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | PT200 |
| Sample Inlet Size | ≤ 10 mm |
| Rotation Speed | 50 rpm |
| Dividing Ports | 1–3 (configurable) |
| Split Ratio Range | 1:5 to 1:26 per port |
| Slit Width Adjustment | 0–159 mm (1-port), 0–110 mm (2-port), 0–53 mm (3-port) |
| Time Setting | Digital, 1–60 min or continuous |
| Container Capacity | 250 mL / 500 mL (collection), 30 L (waste) |
| Power Supply | 100–240 V, 50/60 Hz |
| Dimensions (W×H×D) | 520 × 1050 × 551 mm (base unit) |
| Weight | ~46 kg (incl. DR 100) |
| Compliance | CE, DIN 51701 |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | PT300 |
| Sample Division Principle | Rotational Gravity-Based Splitting |
| Dividing Modules | 6-, 8-, or 10-way (batch) / 1-way (with reject) |
| Feed Particle Size | ≤ 30 mm |
| Rotational Speed | 18–53 rpm |
| Feed Volume Options | 3,000 / 3,750 / 5,000 / 7,500 mL (module-dependent) |
| Reject Container Capacity | 40 L |
| Vibration Feeder | Digitally Adjustable |
| Power Supply | 240 V, 50 Hz, Single-Phase |
| Dimensions (W×H×D) | 1180 × 1510 × 750 mm |
| Net Weight | ~209 kg (incl. vibratory feeder) |
| Compliance | CE-marked, Designed for GLP-Compliant Sampling Environments |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | PT600 |
| Sample Capacity | 6,000–15,000 mL |
| Dividing Modules | 4 / 6 / 8 / 10-way (batch) or 1-way (with reject) |
| Rotational Speed | 18–53 rpm |
| Vibration Feeder | Digital control |
| Rejection Mode | Continuous single-stream discharge |
| Observation Window | Illuminated |
| Hopper Volume | 70 L |
| Dimensions (W×H×D) | 1180 × 1620 × 750 mm |
| Net Weight | ~230 kg |
| Power Supply | 240 V, 50 Hz, Single-phase |
| Compliance | CE-marked |
| Application Scope | Bulk granular & powdered materials in agriculture, geology, construction, pharma, food, metallurgy, environmental analysis |
| Brand | RETSCH |
|---|---|
| Origin | Germany |
| Model | RT 100 |
| Compliance | DIN 51701 |
| Sample Feed Type | Gravity-fed groove-based division |
| Adjustable Groove Width | Yes |
| Application Scope | Dry, free-flowing granular and powdered materials |
| Construction | Stainless steel body with wear-resistant grooved divider plate |
| Intended Use | Laboratory and field sampling for representative sub-sampling prior to particle size analysis, chemical assay, or quality control testing |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | RT 6.5–75 |
| Compliance | DIN 51701 |
| Sample Handling Principle | Manual Trough-Type Division |
| Portability | Benchtop & Field-Deployable |
| Intended Use | Representative Subsampling of Granular, Powdery, and Particulate Bulk Materials |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | RT |
| Division Ratio | 1:1 (2-way split) |
| Max. Feed Size (RT 75) | ~50 mm |
| Max. Batch Capacity (RT 75) | 16 L |
| Dimensions (W×H×D, RT 75) | 620 × 420 × 260 mm |
| Net Weight (RT 75) | ~12.5 kg |
| Compliance | DIN 51701-4 |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | RT100 |
| Sample Capacity | ≤ 30 L |
| Number of Subsamples | 2 |
| Adjustable Groove Width | 12–108 mm (in 12-mm increments) |
| Dimensions (W×H×D) | 72 × 70 × 46 cm |
| Net Weight | ~55 kg |
| Compliance | DIN 51701 |
| Power Requirement | None (manual operation) |
| Brand | RION |
|---|---|
| Origin | Japan |
| Model | KE40B |
| Measurement Principle | Laser Light Scattering (830 nm Diode Laser, Class 1 per IEC 60825-1) |
| Detection Range | 0.15–0.5 µm (factory-configured 4-channel: 0.15 / 0.2 / 0.3 / 0.5 µm |
| Detection Efficiency | 50 ± 10% at 0.15 µm |
| Sample Flow Rate | 10 mL/min |
| Maximum Particle Concentration | 1,200 particles/mL (±5% accuracy for 0.15 µm particles) |
| Sample Pressure Limit | ≤300 kPa (gauge) |
| Wetted Materials | Quartz, PFA |
| Calibration Standard | PSL spheres (1.6 µm nominal) |
| Display Interface | Integrated resistive touch screen |
| Data Output | Built-in thermal printer + SD memory card storage |
| Communication | Direct interface with KE-40B1 controller (no external PC required) |
| Power Supply | DC 12 V (supplied by KE-40B1) |
| Operating Environment | 15–30 °C, ≤85% RH (non-condensing) |
| Dimensions (H×W×D) | 160 × 300 × 251 mm (excl. protrusions) |
| Weight | ~7.5 kg |
| Origin | Shandong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | RISE 2202 |
| Pricing | Available Upon Request |
| Measurement Range | 0.1–600 µm |
| Accuracy Error | < ±1% (D50, NIST-traceable standard reference materials) |
| Repeatability | < ±1% (D50, same sample, consecutive runs) |
| Power Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions (L×W×H) | 1000 × 330 × 320 mm |
| Weight | 39 kg |
| Laser Source | He-Ne gas laser, λ = 632.8 nm, linewidth < 0.002 nm, lifetime > 25,000 h |
| Detector Array | Non-uniform, cross-dimensional 3D扇-shaped matrix (patent-pending geometry), max detection angle: 90° |
| Dispersion System | Integrated 400 mL wet dispersion cell with 100 W ultrasonic probe, programmable sonication time, adjustable stirrer speed & circulation pump flow rate |
| Software | PADMAS v5.2 (Particle Diameter Measure & Analysis System), compliant with GLP audit trail requirements, supports FDA 21 CFR Part 11 optional electronic signature module |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China) |
| Model | RISE-2026 |
| Pricing | Upon Request |
| Measurement Range (Wet) | 0.05–800 µm |
| Measurement Range (Dry) | 0.1–800 µm |
| Accuracy Error | < ±1% (D50, NIST-traceable standard reference materials) |
| Repeatability | < ±1% (D50, same sample, repeated measurements) |
| Electrical Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions (L×W×H) | 950 × 330 × 300 mm |
| Weight | 50 kg |
| Laser Source | He–Ne gas laser, λ = 632.8 nm, lifetime >25,000 h |
| Maximum Detection Angle | 105° |
| Detector Array | Non-uniform cross-three-dimensional扇-shaped matrix (translated as “non-uniform crossed 3D sectoral matrix”) |
| Optical Design | Single-range convergent optical path, Fourier lens-free alignment |
| Standard Grading | 130 size classes default (0.02–2000 µm), fully customizable from Class 1 to 130 |
| Software | PADMAS v5.x (Particle Diameter Measure & Analysis System) |
| Data Export | CSV, Excel (.xlsx), PDF, PNG/JPEG images |
| Compliance | Designed per Q/01RZ01–2004 enterprise standard |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China) |
| Model | RISE-2028 |
| Pricing | Available Upon Request |
| Measurement Range (Wet) | 0.02–1200 µm |
| Measurement Range (Dry) | 0.1–1200 µm |
| Accuracy Error | < ±1% (D50, NIST-traceable standard reference materials) |
| Repeatability | < ±1% (D50, same sample, repeated measurements) |
| Power Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions (L×W×H) | 950 × 330 × 300 mm |
| Weight | 50 kg |
| Laser Source | He-Ne gas laser, λ = 632.8 nm, lifetime >25,000 h |
| Maximum Detection Angle | 135° |
| Detector Array | Non-uniform cross-three-dimensional扇-shaped matrix (translated as “non-uniform crossed 3D sectoral matrix”) |
| Default Size Classes | 130 channels (0.02–2000 µm), fully customizable from 1–130 channels |
| Data Output | Excel-compatible CSV, PDF, image (PNG/JPEG), printable reports with header/footer customization |
| Software | PADMAS v5.x (Particle Diameter Measure & Analysis System) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | RISE-2206 |
| Pricing | Upon Request |
| Measurement Range | 0.05–800 µm |
| Accuracy Error | < ±1% (D50, NIST-traceable standard reference materials) |
| Repeatability | < ±1% (D50, same sample, 3 consecutive runs) |
| Laser Source | He-Ne, 632.8 nm, >25,000 h lifetime |
| Detector Array | Non-uniform cross-3D扇-shaped matrix, max detection angle 105° |
| Power Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions (L×W×H) | 1000 × 330 × 320 mm |
| Weight | 39 kg |
| Dispersion System | Integrated 400 mL wet dispersion cell with 100 W ultrasonic probe, automatic degassing, circulation, rinsing and drainage |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Rise-2002 |
| Pricing | Available Upon Request |
| Measurement Range | 0.1–600 µm |
| Accuracy Error | < ±1% (D50, Certified Reference Materials per GB/T 19077) |
| Repeatability | < ±1% (D50, Certified Reference Materials) |
| Electrical Supply | AC 220 ±10 V, 50 Hz, 200 W |
| Dimensions (L×W×H) | 1000 × 330 × 320 mm |
| Weight | 38 kg |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | Rise-2006 |
| Pricing | Available Upon Request |
| Measurement Range | 0.05–800 µm |
| Accuracy Error | < ±1% (D50, certified reference materials per GB/T 19077–2016) |
| Repeatability | < ±1% (D50, same standard) |
| Electrical Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions | 1000 × 330 × 320 mm |
| Weight | 38 kg |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Rise-2008 |
| Pricing | Available Upon Request |
| Measurement Range | 0.02–1200 µm |
| Accuracy Error | < ±1% (D50, NIST-traceable standard reference materials) |
| Repeatability | < ±1% (D50, same sample, consecutive runs) |
| Power Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions (L×W×H) | 1000 × 330 × 320 mm |
| Weight | 38 kg |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | Rise-2012 |
| Price Range | USD 0–14,500 |
| Dispersion Method | Dry dispersion only |
| Measurement Range | 0.1–600 µm |
| Repeatability | < ±1% (D50 of NIST-traceable standard reference material) |
| Measurement Time | ≤10 seconds per run |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | Rise-2016 |
| Price Range | USD 14,000–21,000 |
| Dispersion Method | Dry dispersion only |
| Measurement Range | 0.1–800 µm |
| Repeatability | < ±1% RSD (NIST-traceable standard reference material, D₅₀) |
| Measurement Time | ≤10 seconds per analysis |
| Laser Source | He-Ne, 632.8 nm, >25,000 h lifetime |
| Detector Array | Non-uniform, cross-dimensional 3D扇-shaped matrix, max detection angle 105° |
| Power Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions (L×W×H) | 950 × 330 × 300 mm |
| Weight | 40 kg |
| Measurement Range | 0.1–1200 µm |
|---|---|
| Accuracy Error | < ±1% (D50, NIST-traceable standard reference materials) |
| Repeatability | < ±1% (D50, same sample, repeated measurements) |
| Laser Source | He-Ne, 632.8 nm, >25,000 h lifetime |
| Power Supply | AC 220 V ±10%, 50 Hz, 200 W |
| Dimensions | 950 × 330 × 300 mm |
| Weight | 40 kg |
| Detector Array | Non-uniform, cross-aligned 3D扇-shaped matrix, max detection angle 135° |
| Optical Design | Single-range convergent beam Fourier optics, alignment-free |
| Software | PADMAS v5.x (Particle Diameter Measure & Analysis System) |