- All
- Favorite
- Popular
- Most rated
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | A11 |
| Motor Input Power | 160 W |
| Motor Output Power | 100 W |
| Max. Speed | 28,000 rpm |
| Max. Tip Speed | 53 m/s |
| Max. Sample Volume | 80 mL |
| Max. Feed Hardness | 6 Mohs |
| Max. Feed Size | 10 mm |
| Grinding Principle | Impact & Shear |
| Processing Mode | Batch |
| Grinding Head Material | Stainless Steel 1.4034 |
| Grinding Chamber Material | Stainless Steel 1.4571 + PTFE (glass-fiber reinforced) |
| Cooling Options | Dry Ice or Liquid Nitrogen |
| Dimensions (W × H × D) | 85 × 240 × 85 mm |
| Weight | 1.5 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| IP Rating | IP43 |
| Voltage | 220–240 V / 100–115 V |
| Frequency | 50/60 Hz |
| Duty Cycle | 1 min ON / 10 min OFF |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | M20 |
| Instrument Type | Laboratory Grinder |
| Sample Suitability | Hard and Brittle Materials (Dry Grinding Only) |
| Final Particle Size | < 0.01 mm |
| Motor Input/Output Power | 440 W / 225 W |
| No-Load Speed | 20,000 rpm |
| Tip Speed | 72 m/s |
| Grinding Chamber Volume | 250 mL |
| Chamber & Lid Material | Stainless Steel AISI 304 |
| Duty Cycle | 7 min ON / 10 min OFF |
| Max. Feed Particle Size | 6–7 mm |
| Dimensions (W×D×H) | 170 × 170 × 350 mm |
| Weight | 6.6 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection Rating | IP21 |
| Cooling | External Jacketed Chamber with Water Circulation Ports |
| Dual-Chamber Capability | Yes (Shared Motor Drive) |
| Safety | Integrated Current-Limiting Overload Protection |
| Brand | Waring |
|---|---|
| Origin | USA |
| Model Series | 800S / 8011S / 8010S / LB20ES / 7012S / 7012G / HGB500 / HGB550 / 24CB10C |
| Capacity Range | 1 L – 4 L |
| Max Speed | 22,000 rpm (800S, 8011S, 7012S, 7012G) to 23,000 rpm (HGB550) |
| Power Supply | 230 V, 50/60 Hz, Single-Phase AC |
| Motor Housing | Epoxy-Coated Steel or Stainless Steel Base |
| Vessel Material | Autoclavable Stainless Steel (standard) or Borosilicate Glass (7012G) |
| Lid Construction | Dual-Layer Polyethylene/Polystyrene |
| Certifications | UL Listed, NSF Certified |
| Drive Mechanism | Precision Metal Coupling with Rubber Sheathing (HGB550, 24CB10C) |
| Bearing System | High-Load Spherical Bearings (24CB10C) |
| Cord Length | 183 cm (HGB550) to 213 cm (24CB10C) |
| Weight Range | 3.8 kg (800S) to 17.24 kg (24CB10C) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF10 |
| Instrument Type | Grinder |
| Sample Applicability | Hard and brittle materials |
| Output Particle Size | < 0.01 mm |
| Motor Input/Output Power | 1000 / 500 W |
| Speed Range | 3000–6500 rpm |
| Tip Linear Velocity (MF10.1 Shear Rotor) | 22.5 m/s |
| Tip Linear Velocity (MF10.2 Impact Rotor) | 31.4 m/s |
| Wetted Materials | AISI 316L stainless steel |
| Duty Cycle | 120 min ON / 30 min OFF |
| Overload Protection | Yes |
| Weight | 9.7 kg |
| Dimensions (W×D×H) | 320 × 300 × 380 mm |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection Rating | IP22 |
| Brand | Waring |
|---|---|
| Origin | USA |
| Model | CB15E |
| Capacity | 4 L |
| Motor Power | 3.75 HP |
| Speed Range | 0–21,500 rpm (5-step: Off–Low–Medium–High–Pulse) |
| Construction | Stainless Steel Vessel & Blades, Epoxy-Coated Base, High-Performance Spherical Bearings |
| Compliance | UL, NSF, CE Certified |
| Noise Level | Industry-Leading Low-Noise Operation |
| Stability | Wide-Base Rubber Non-Slip Feet |
| Dimensions (H) | 56.5 cm |
| Net Weight | 17.24 kg |
| Electrical | 230 V, 50/60 Hz, Single-Phase AC, 7.5 A |
| Accessories Available | Temperature Controller (2610T4L), Foam Suppressor (2610F), Cooling Base (2610C4L), Dual-Handle Vessels (CAC70/CAC72), Heat-Resistant Polycarbonate Lid (017442), Stainless Steel Lid (501697), Carbide-Tipped Blade Assembly with Synthetic Rubber Seal (CBL10), 4L Adapter (AD1) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Tube Mill control |
| Instrument Type | Grinder |
| Sample Type | Soft to moderately hard (up to 5 Mohs) |
| Feed Size | ≤10 mm |
| Output Particle Size | ≥0.5 mm |
| Batch Volume | 40 mL |
| Speed Range | 5,000–25,000 rpm |
| Motor Output Power | 80 W |
| Input Power | 100 W |
| Max. Peripheral Speed | 65 m/s |
| Cooling Options | Dry ice compatible (grinding chamber), not liquid nitrogen |
| Dimensions (W×D×H) | 180 × 170 × 300 mm |
| Weight | 2.7 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Protection Rating | IP30 |
| Interface | USB (for remote control & data logging), no RS232 or analog output |
| Voltage/Frequency | 100–120 V / 220–240 V, 50/60 Hz |
Show next