HORIBA
Filter
Showing 601–630 of 676 results
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | U-50 Portable Series |
| Instrument Type | Portable / Handheld Water Quality Analyzer |
| Measured Parameters | pH, ORP, Conductivity, Dissolved Oxygen, Temperature, Salinity, TDS, Specific Gravity (Seawater), Turbidity (LED or Tungsten Lamp), Depth (pressure-based, up to 30 m) |
| Turbidity Standards | U-53 complies with US EPA Method 180.1 |
| Turbidity Resolution | 0.01 NTU (U-53/U-54 variants) |
| Operating Temperature Range | −10 °C to +55 °C |
| IP Rating | IP68 (electrode), IP67 (host unit with cable connected) |
| Battery Life | Up to 70 hours (alkaline AA × 4, backlight off) |
| Data Storage | 10,000 measurement sets |
| Communication | USB |
| Display | 320 × 240 monochrome LCD with backlight |
| Weight | ~1.76 lbs (host), ~3.97 lbs (electrode assembly) |
| Electrode Cable Length | Standard 2 m (optional 10 m or 30 m) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | U-50 Series |
| Instrument Type | Portable / Handheld Water Quality Analyzer |
| Measured Parameters | pH, ORP, Dissolved Oxygen (DO), Conductivity, Salinity, TDS, Specific Gravity (Seawater), Temperature, Turbidity (LED or Tungsten Lamp), Water Depth (on select models) |
| Turbidity Standards | US EPA Method (U-53), EN ISO 7027 (U-54) |
| Operating Temperature Range | −10 to 55 °C |
| Depth Measurement Range | up to 30 m (pressure-based, on U-52G/U-53/U-53G/U-54/U-54G) |
| Waterproof Rating | IP67 (host), IP68 (probe) |
| Display | 320 × 240 monochrome backlit LCD |
| Data Storage | 10,000 measurement sets |
| Power | Four AA alkaline batteries (≈70 h operation without backlight) |
| Communication | USB |
| Probe Cable Length | Standard 2 m (optional 10 m or 30 m) |
| Probe Material | PPS, SUS316L, SUS304, FKM, PEEK, Titanium, FEP membrane, POM |
| Weight | Host ≈ 800 g |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | U-50 Series |
| Instrument Type | Portable / Handheld Water Quality Analyzer |
| Measured Parameters | pH, ORP, Dissolved Oxygen (DO), Electrical Conductivity (EC), Salinity, TDS, Specific Gravity (Seawater), Temperature, Turbidity (NTU), Depth (m), GPS Positioning |
| Turbidity Standards | U-53 — US EPA Method 180.1 |
| Turbidity Resolution | 0.01 NTU |
| Operating Temperature Range | −10 to 55 °C |
| Depth Measurement Range | up to 30 m |
| IP Rating | IP67 (instrument), IP68 (probe) |
| Battery Life | up to 70 h (alkaline AA × 4, backlight off) |
| Data Storage | 10,000 measurement sets |
| Communication | USB |
| Display | 320 × 240 monochrome LCD with backlight |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | U-50 Series (U-51/U-52/U-52G/U-53/U-53G/U-54/U-54G) |
| Instrument Type | Portable/HANDHELD Water Quality Analyzer |
| Measured Parameters | pH, ORP, Dissolved Oxygen (DO), Conductivity, Salinity, TDS, Specific Gravity (Seawater), Temperature, Turbidity (LED or Tungsten Lamp), Depth (pressure-based, up to 30 m), GPS (U-52G/U-53G/U-54G models) |
| Turbidity Standards | U-53 complies with US EPA Method 180.1 |
| Turbidity Resolution | 0.01 NTU (0–10 NTU range) |
| DO Measurement Principle | Clark-type polarographic sensor with enhanced response time and simplified maintenance |
| pH Measurement Principle | Glass electrode method (two-point calibration, auto-temperature compensation) |
| Conductivity Measurement Principle | AC four-electrode method with automatic range switching and 25 °C temperature compensation |
| Depth Measurement Principle | Piezoresistive pressure transducer |
| IP Rating | IP68 (electrode), IP67 (host unit with cable connected) |
| Operating Temperature | –5 °C to 45 °C |
| Storage Temperature | –10 °C to 60 °C |
| Battery Life | Up to 70 hours (alkaline AA × 4, backlight off) |
| Data Storage | 10,000 measurement sets |
| Communication Interface | USB |
| Display | 320 × 240 monochrome LCD with backlight |
| Weight | Host ~800 g |
| Probe Cable Length | Standard 2 m (optional 10 m or 30 m) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | U-50 Series |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measured Parameters | pH, ORP, Conductivity, Dissolved Oxygen (DO), Temperature, Turbidity, Salinity, TDS, Specific Gravity (Seawater), Depth, GPS Positioning |
| Turbidity Standards | U-53 — US EPA Method 180.1 (LED forward scatter) |
| Turbidity Resolution | 0.01 NTU (0–10 NTU range) |
| DO Sensor Response Time | Improved polarographic response (<60 s to 90% step change) |
| Operating Temperature | −10 °C to +55 °C |
| Depth Measurement Range | Up to 30 m (pressure-based, optional on U-52G/U-53G/U-54G) |
| IP Rating | IP67 (instrument body), IP68 (probe assembly) |
| Data Storage | 10,000 measurement sets |
| Power | Four AA alkaline batteries (≈70 h operation, backlight off) |
| Communication | USB 2.0 |
| Display | 320 × 240 monochrome LCD with backlight |
| Weight | Probe ≈1.8 kg |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | U-50 Portable |
| Instrument Type | Multiparameter |
| Parameter Count | 11 |
| pH Range | 0–14 |
| pH Resolution & Accuracy | 0.01 pH |
| ORP Range | −2000 to +2000 mV |
| DO Range | 0–50.0 mg/L |
| DO Resolution | 0.01 mg/L |
| Conductivity Range | 0–10 S/m |
| Turbidity Methods | LED forward scatter (U-53), tungsten lamp 90° scatter (U-53G), LED 90° scatter (U-54) |
| Turbidity Resolution | 0.01 NTU (0–10 NTU range) |
| Depth Measurement | up to 30 m (pressure-based, optional on U-52G/U-53G/U-54G) |
| Temperature Range | −10 to 55 °C |
| IP Rating | IP67 (host), IP68 (probe) |
| Battery Life | up to 70 h (alkaline AA ×4, backlight off) |
| Data Storage | 10,000 sets |
| Communication | USB |
| Calibration | 2-point pH (pH 4.01/7.00/9.18 buffers), multi-point turbidity/conductivity |
| Brand | HORIBA |
|---|---|
| Origin | France |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Ultima Expert |
| Instrument Type | Sequential Scanning ICP-OES |
| Detection Limit | Not Specified |
| Precision (RSD) | ≤1% |
| Long-Term Stability (RSD) | ≤2% |
| Wavelength Range | 160–800 nm |
| Optical Resolution | ≤0.005 nm at 200 nm (Constant Resolution Across Full Range) |
| Brand | HORIBA |
|---|---|
| Origin | France |
| Model | Ultima Expert |
| Instrument Type | Sequential Scanning ICP-OES |
| Detection Limit | Not Specified |
| Repeatability | ≤1% RSD |
| Stability | ≤2% RSD |
| Wavelength Range | 160–800 nm |
| Optical Resolution | ≤0.005 nm (5 pm) |
| Detector | High-Density Diode (HDD) Array |
| Grating Options | 2400 g/mm holographic grating (≤5 pm @ 120–320 nm |
| Grating Size | 110 × 110 mm ion-etched holographic grating |
| Stray Light Level | <1 × 10⁻⁷ |
| Monochromator | Czerny-Turner with 1 m focal length |
| Plasma Observation | Vertical torch with side-on viewing geometry |
| Brand | HORIBA |
|---|---|
| Origin | France |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported Instrument |
| Model | UVISEL |
| Pricing | Available Upon Request |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Instrument Type | Online Gas Analyzer |
| Target Gases | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, C₂H₄, O₂ |
| Minimum Range | 1–5 ppm |
| Repeatability | ±0.5% of Full Scale |
| Resolution | 0.1 ppm |
| Response Time (T90) | ≤30 s |
| Zero Drift | ±2.0% of Full Scale per Week |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Measurement Principles | NDIR (Non-Dispersive Infrared), CLD (Chemiluminescence Detection), Paramagnetic, Electrochemical, Zirconia, Magnetic Pressure |
| Measured Gases | CO, CO₂, CH₄, NO, NO₂, NOₓ, N₂O, SO₂, O₂ |
| Warm-up Time | ≤20 min (NDIR modules) |
| Module Capacity | Up to 3 sensor modules per 19″ rack unit |
| Compliance | Designed for ISO 14001-aligned monitoring, EPA Method-compliant configurations available, supports GLP/GMP data integrity requirements |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Instrument Type | In-situ Continuous Emission Monitoring (CEM) System |
| Detection Principle | Non-Dispersive Infrared (NDIR), Chemiluminescence (CLA), Magnetic Pressure (MPA), Electrochemical (Galvanic), Zirconia Oxide |
| Target Gases | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, C₂H₄, O₂ |
| Minimum Detectable Range | 1–5 ppm |
| Repeatability | ±0.5% FS |
| Linearity | ±1.0% FS (≤10× span) |
| Zero Drift | ±2.0% FS/week (NDIR/CLA/MPA/ZrO₂) |
| Span Drift | ±2.0% FS/week (NDIR/CLA/MPA/ZrO₂) |
| Response Time | T₉₀ ≤ 30 s (single-component mode, from analyzer inlet) |
| Resolution | 0.1 ppm (for ppm-range gases) |
| Analog Outputs | DC 0–1 V (non-isolated), DC 4–20 mA (optional) |
| Digital Interface | RS-232C |
| Sample Flow Rate | 0.5 L/min (analyzer) |
| Operating Temperature | 0–40 °C |
| Relative Humidity | ≤90% RH (non-condensing) |
| Power Supply | AC 100–120 V or 200–240 V, 50/60 Hz |
| Power Consumption | ~200 VA (VA-3000) |
| Dimensions (VA-3000) | 430 mm W × 132 mm H × 550 mm D |
| Weight (VA-3000) | ~20 kg |
| Enclosure | 19-inch rack-mountable chassis |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000, VS-3000 |
| Instrument Type | Portable & Rack-Mountable |
| Detection Targets | CO, CO₂, N₂O, CH₄, SO₂, NOₓ, O₂ (MPA/Galvanic/Zirconia), H₂ (MPA) |
| Minimum Range | 1–20 ppm |
| Repeatability | ±0.5% F.S. |
| Resolution | 0.1 ppm |
| Response Time (T90) | ≤30 sec |
| Zero Drift | ±2.0% F.S./week (excluding galvanic cells) |
| Span Drift | ±2.0% F.S./week (excluding galvanic cells) |
| Linearity Error | ±1.0% F.S. |
| Sampling Flow Rate | 0.5 L/min (analyzer), 1.5–5.0 L/min (preconditioning unit) |
| Warm-up Time | ~20 min (NDIR, galvanic), ~40 min (zirconia), ~60 min (CLA, MPA) |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Power Consumption | 100–450 VA |
| Display | 320 × 240 pixel LCD (111.2 mm × 89.38 mm) |
| Enclosure | 19-inch rack-mount chassis |
| Dimensions (VA-3000) | 430 mm (W) × 132 mm (H) × 500 mm (D) |
| (VS-3000) | 430 mm (W) × 221 mm (H) × 550 mm (D) |
| Weight | ~14–20 kg |
| Operating Environment | 0–40 °C, ≤90% RH |
| Sample Gas Requirements | Particulates ≤0.1 mg/m³, Dew Point ≤60 °C, Pressure Variation ±980 Pa |
| Wetted Materials | SUS, PP, PVC, PVDF, PTFE, FKM, CR, Glass |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000, VS-3000 |
| Instrument Type | Portable / Rack-Mountable |
| Detection Targets | Multi-component (CO, CO₂, N₂O, CH₄, SO₂, NOₓ, O₂, H₂, H₂S, etc.) |
| Minimum Range | 1–20 ppm |
| Repeatability | ±0.5% F.S. |
| Resolution | 0.1 ppm |
| Response Time | T90 ≤ 30 s |
| Zero Drift | ±2.0% F.S./week (excluding galvanic cells) |
| Span Drift | ±2.0% F.S./week (excluding galvanic cells) |
| Linearity Error | ±1.0% F.S. |
| Sampling Flow Rate | 0.5 L/min (analyzer), 1.5–5.0 L/min (preconditioning unit) |
| Warm-up Time | ~20 min (NDIR, galvanic), ~40 min (zirconia), ~60 min (CLA, MPA) |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Power Consumption | 100–450 VA |
| Display | 320 × 240 pixel LCD (111.2 mm × 89.38 mm) |
| Enclosure | 19-inch rack-mount chassis |
| Dimensions (VA-3000) | 430 mm (W) × 132 mm (H) × 500 mm (D) |
| Dimensions (VS-3000) | 430 mm (W) × 221 mm (H) × 550 mm (D) |
| Weight | ~14–20 kg |
| Operating Environment | 0–40 °C, ≤90% RH |
| Sample Gas Conditions | Particulates ≤0.1 mg/m³, Dew Point ≤60 °C, Pressure Fluctuation ±980 Pa |
| Wetted Materials | SUS, PP, PVC, PVDF, PTFE, FKM, CR, Glass |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Measurement Principles | NDIR, CLA, MPA, Galvanic, Zirconia |
| Zero/Span Drift (NDIR) | ±2.0% F.S./week |
| Repeatability | ±0.5% F.S. |
| Linearity | ±1.0% F.S. |
| T90 Response Time | ≤30 s |
| Sample Flow Rate (VA-3000) | ~0.5 L/min |
| Sample Flow Rate (VS-3000) | 1.5–5.0 L/min |
| Gas Ranges | CO (0–200 ppm to 0–100 vol%), CO₂ (0–100 ppm to 0–100 vol%), N₂O (0–100 ppm to 0–5000 ppm), CH₄ (0–200 ppm to 0–100 vol%), SO₂ (0–200 ppm to 0–10 vol%), NOₓ (0–20 ppm to 0–5000 ppm, CLA), MPA (0–5 vol% to 0–100 vol%), Galvanic O₂ (0–5 vol% to 0–25 vol%), Zirconia O₂ (0–5 vol% to 0–25 vol%) |
| Range Switching | Up to 4 ranges (CLA up to 8) |
| Analog Outputs | 0–1 V DC, 4–20 mA DC |
| Digital Interface | RS-232C |
| Warm-up Time | ~20 min (NDIR/Galvanic), ~40 min (Zirconia), ~60 min (CLA/MPA) |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Power Consumption | 100–350 VA (VA-3000), 250–450 VA (VS-3000) |
| Display | LCD, 320 × 240 pixels |
| Enclosure | 19-inch rack-mount |
| Dimensions (VA-3000) | 430 × 132 × 500 mm (W×H×D) |
| Dimensions (VS-3000) | 430 × 221 × 550 mm (W×H×D) |
| Operating Environment | 0–40 °C, ≤90% RH |
| Weight | ~20 kg (VA-3000, 3-component configuration), 14–20 kg (VS-3000) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Repeatability | ±0.5% FS |
| Response Time (T90) | ≤30 s |
| Stability | ±2.0% FS/week |
| Detection Principles | NDIR, CLA, MPA, Electrochemical (Galvanic), Zirconia |
| Gas Compatibility | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, C₂H₄, O₂ |
| Max Integrated Sensor Modules | 3 |
| Analog Outputs | DC 0–1 V / 4–20 mA (optional) |
| Communication Interface | RS-232C |
| Operating Temperature | 0–40 °C |
| Power Supply | AC 100–120 V or 200–240 V, 50/60 Hz |
| Weight (VA-3000) | ~20 kg |
| Enclosure | 19-inch rack-mount chassis |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 (Analyzer Unit) / VS-3000 (Sampling System) |
| Detection Principles | NDIR, CLA, MPA, Electrochemical, Zirconia |
| Measurable Gases | CO, CO₂, NOₓ, SO₂, CH₄, C₂H₄, N₂O, O₂ |
| Accuracy | ±0.5% F.S. (repeatability), ±1.0% F.S. (linearity), ±2.0% F.S./week (drift) |
| Response Time | T90 ≤ 30 s (single component) |
| Analog Outputs | 0–1 V DC, 4–20 mA (optional) |
| Communication | RS-232C |
| Operating Temperature | 0–40 °C |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Dimensions (VA-3000) | 430 × 132 × 550 mm (W×H×D) |
| Weight (VA-3000) | ~20 kg |
| Compliance | Designed for ISO/IEC 17025-aligned operation, compatible with EPA Method TO-15 & ASTM D6348 preconditions |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000/VS-3000 |
| Repeatability | ±0.5% of Full Scale |
| Response Time | T90 ≤ 30 s |
| Stability | ±2.0% of Full Scale per Week |
| Detection Principles | NDIR, CLA, MPA, Electrochemical (Galvanic), Zirconia |
| Gas Compatibility | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, C₂H₄, O₂ |
| Max Internal Sensor Modules | 3 |
| Analog Outputs | DC 0–1 V / 4–20 mA (optional) |
| Communication Interface | RS-232C |
| Operating Temperature | 0–40 °C |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Weight (VA-3000) | ~20 kg |
| Enclosure | 19-inch rack-mountable chassis |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Instrument Type | Online Continuous Emission Monitor (CEM) |
| Detection Principle | NDIR, CLA, MPA, Electrochemical, Zirconia |
| Measurable Gases | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, C₂H₄, O₂ |
| Minimum Detectable Range | 1–5 ppm |
| Repeatability | ±0.5% of Full Scale (FS) |
| Resolution | 0.1 ppm |
| Response Time (T90) | ≤30 s |
| Zero Drift | ±2.0% FS/week |
| Warm-up Time | 20–60 min (varies by sensor type) |
| Analog Output | DC 0–1 V / 4–20 mA |
| Digital Interface | RS-232C |
| Sample Flow Rate | ~0.5 L/min |
| Operating Environment | 0–40°C, RH <90%, non-condensing |
| Power Supply | AC 100–240 V, 50/60 Hz |
| VA-3000 Dimensions | 430 × 132 × 550 mm (W×H×D) |
| Weight | ~20 kg |
| VS-3000 Sampling Unit Options | VS-3001 to VS-3004 (modular configurations) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 (Analyzer Unit) / VS-3000 (Sampling System) |
| Repeatability | ±0.5% of Full Scale |
| Response Time | T90 ≤ 30 s |
| Stability | ±2.0% of Full Scale per Week |
| Detection Principles | NDIR, CLA, MPA, Electrochemical (Galvanic), Zirconia |
| Gas Compatibility | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, O₂, C₂H₄ (optional), Cl₂ (optional) |
| Analog Outputs | DC 0–1 V / 4–20 mA (optional) |
| Digital Interface | RS-232C |
| Operating Temperature | 0–40 °C |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Analyzer Dimensions | 430 × 132 × 550 mm (W×H×D) |
| Weight | ~20 kg |
| Sampling Unit Dimensions (VS-3004) | 430 × 221 × 550 mm |
| Weight | ~20 kg |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Instrument Type | Online Gas Analyzer |
| Detection Principle | NDIR (CO, CO₂, CH₄, N₂O, SO₂), CLA (NOₓ), MPA (O₂), Electrochemical (O₂), Zirconia (O₂) |
| Minimum Detectable Range | 1–5 ppm |
| Repeatability | ±0.5% of Full Scale |
| Resolution | 0.1 ppm |
| Response Time (T90) | ≤30 s |
| Zero Drift | ±2.0% of Full Scale per week |
| Warm-up Time | 20–60 min depending on sensor type |
| Analog Output | DC 0–1 V or 4–20 mA (optional) |
| Communication Interface | RS-232C |
| Sample Flow Rate | ~0.5 L/min |
| Operating Temperature | 0–40 °C |
| Power Supply | AC 100–120 V or 200–240 V, 50/60 Hz |
| Weight (VA-3000) | ~20 kg |
| Enclosure | 19-inch rack-mount chassis (430 × 132 × 550 mm) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Instrument Type | Online Analyzer |
| Detection Principle | NDIR, CLA, MPA, Electrochemical (Galvanic), Zirconia |
| Measurable Gases | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, C₂H₄, O₂ |
| Minimum Range | 1–5 ppm |
| Repeatability | ±0.5% F.S. |
| Resolution | 0.1 ppm |
| Response Time | T₉₀ ≤ 30 s |
| Zero Drift | ±2.0% F.S./week |
| Warm-up Time | 20–60 min (depending on sensor type) |
| Analog Output | 0–1 V DC or 4–20 mA (optional) |
| Communication Interface | RS-232C |
| Sample Flow Rate | ~0.5 L/min |
| Operating Environment | 0–40 °C, ≤90% RH |
| Power Supply | AC 100–120 V or 200–240 V, 50/60 Hz |
| Dimensions (VA-3000) | 430 × 132 × 550 mm (W×H×D) |
| Weight (VA-3000) | ~20 kg |
| Enclosure | 19-inch rack-mountable chassis |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 (Analyzer Unit) / VS-3000 (Sampling System) |
| Instrument Type | Online Continuous Gas Analyzer |
| Target Gases | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, C₂H₄, O₂ |
| Detection Principle | NDIR (CO, CO₂, CH₄, N₂O, SO₂), CLA (NOₓ), MPA (O₂), Electrochemical (O₂), Zirconia (O₂) |
| Minimum Detectable Range | 1–5 ppm |
| Full-Scale Repeatability | ±0.5% FS |
| Linearity | ±1.0% FS (≤10× range), ±1.5% FS (>10× range) |
| Zero Drift | ±2.0% FS/week (NDIR/CLA/MPA/ZrO₂), ±1.0% FS/day (Electrochemical O₂) |
| Response Time | T₉₀ ≤ 30 s (single-component mode) |
| Resolution | 0.1 ppm (ppm-range gases) |
| Analog Outputs | DC 0–1 V / 4–20 mA (isolated optional) |
| Digital Interface | RS-232C |
| Sample Flow Rate | 0.5 L/min |
| Operating Temperature | 0–40 °C |
| Power Supply | AC 100–120 V or 200–240 V, 50/60 Hz |
| Dimensions (VA-3000) | 430 × 132 × 550 mm (W×H×D) |
| Weight (VA-3000) | ~20 kg |
| Compliance | Designed for ISO/IEC 17025-aligned operation |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Instrument Type | Online Gas Analyzer |
| Detection Principle | NDIR (CO, CO₂, CH₄, N₂O, SO₂), CLA (NOₓ), MPA (O₂), Electrochemical (O₂), Zirconia (O₂) |
| Repeatability | ±0.5% F.S. |
| Response Time (T90) | ≤30 s |
| Zero & Span Drift | ±2.0% F.S./week |
| Linearity | ±1.0% F.S. |
| Analog Output | 0–1 V DC / 4–20 mA DC |
| Communication Interface | RS-232C |
| Operating Temperature | 0–40 °C |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Weight (VA-3000) | ~20 kg |
| Enclosure | 19-inch rack-mount (430 × 132 × 550 mm) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Instrument Type | Online Gas Analyzer |
| Detection Principle | NDIR (CO, CO₂, CH₄, N₂O, SO₂), CLA (NOₓ), MPA / Electrochemical / Zirconia (O₂) |
| Measuring Range | 1–5 ppm (minimum span) to 100 vol% (max, gas-dependent) |
| Repeatability | ±0.5% FS |
| Resolution | 0.1 ppm |
| Response Time | T90 ≤ 30 s |
| Zero Drift | ±2.0% FS/week |
| Span Drift | ±2.0% FS/week |
| Warm-up Time | 20–60 min (sensor-dependent) |
| Analog Output | DC 0–1 V / 4–20 mA (optional) |
| Digital Interface | RS-232C |
| Sample Flow Rate | ~0.5 L/min |
| Operating Environment | 0–40 °C, RH < 90% |
| Power Supply | AC 100–120 V or 200–240 V, 50/60 Hz |
| Weight | ~20 kg (VA-3000), ~14–20 kg (VS-3001–VS-3004) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Instrument Type | Online Gas Analyzer |
| Detection Principle | Non-Dispersive Infrared (NDIR) and Chemiluminescence (CLA) |
| Target Gases | CO, CO₂, CH₄, NOₓ, SO₂, N₂O, O₂, C₂H₄ |
| Minimum Range | CH₄ 0–5 ppm |
| Repeatability | ±0.5% of Full Scale |
| Resolution | 0.01 ppm |
| Response Time | T₉₀ ≤ 30 s |
| Zero Drift | ±2.0% of Full Scale per week |
| Warm-up Time | ~20 min (NDIR), ~60 min (CLA/MPA) |
| Analog Output | 0–1 V DC or 4–20 mA (optional) |
| Communication Interface | RS-232C |
| Sample Flow Rate | 0.5 L/min |
| Operating Environment | 0–40 °C, RH ≤ 90% |
| Power Supply | AC 100–120 V or 200–240 V, 50/60 Hz |
| Dimensions (VA-3000) | 430 mm W × 132 mm H × 550 mm D |
| Weight (VA-3000) | ~20 kg |
| Enclosure | 19-inch rack-mountable chassis |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000/VS-3000 |
| Instrument Type | Online Gas Analyzer |
| Detection Principle | Non-Dispersive Infrared (NDIR) and Chemiluminescence (CLA) |
| Measurable Gases | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, C₂H₄, O₂ |
| Minimum Range | 1–5 ppm |
| Repeatability | ±0.5% F.S. |
| Linearity | ±1.0% F.S. (±1.5% F.S. beyond 10× range) |
| Zero Drift | ±2.0% F.S./week (±1.0% F.S./day for electrochemical O₂) |
| Span Drift | ±2.0% F.S./week |
| Response Time | T₉₀ ≤ 30 s (single-component mode) |
| Resolution | 0.1 ppm |
| Warm-up Time | 20–60 min (dependent on sensor type) |
| Analog Output | DC 0–1 V or 4–20 mA (optional) |
| Digital Interface | RS-232C |
| Sample Flow Rate | 0.5 L/min |
| Operating Environment | 0–40 °C, ≤90% RH |
| Power Supply | AC 100–120 V or 200–240 V, 50/60 Hz |
| Weight | ~20 kg (VA-3000), ~14–20 kg (VS-3001–VS-3004) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Instrument Type | Online Gas Analyzer |
| Detection Principle | Non-Dispersive Infrared (NDIR) and Chemiluminescence (CLA) |
| Target Gases | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, C₂H₄, O₂ |
| Minimum Detectable Range | 1–5 ppm |
| Repeatability | ±0.5% of Full Scale |
| Resolution | 0.1 ppm |
| Response Time (T90) | ≤30 s |
| Zero Drift | ±2.0% of Full Scale per week |
| Warm-up Time | ~20 min (NDIR), ~60 min (CLA/MPA) |
| Analog Output | DC 0–1 V or 4–20 mA (optional) |
| Communication Interface | RS-232C |
| Sample Flow Rate | ~0.5 L/min |
| Operating Environment | 0–40 °C, ≤90% RH |
| Power Supply | AC 100–120 V or 200–240 V, 50/60 Hz |
| Dimensions (VA-3000) | 430 mm (W) × 132 mm (H) × 550 mm (D) |
| Weight | ~20 kg |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 / VS-3000 |
| Instrument Type | Online Gas Analyzer |
| Detection Principle | Non-Dispersive Infrared (NDIR) and Chemiluminescence (CLA) |
| Measurable Gases | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, C₂H₄, O₂ |
| Minimum Detectable Range | 1–5 ppm |
| Repeatability | ±0.5% of Full Scale |
| Resolution | 0.1 ppm |
| Response Time (T90) | ≤30 s |
| Zero Drift | ±2.0 ppm per week (NDIR/CLA), ±1.0% per day (electrochemical O₂) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | VA-3000 (Analyzer Unit) / VS-3000 (Sampling System) |
| Instrument Type | Online Gas Analyzer |
| Target Gases | CO, CO₂, NOₓ, SO₂, CH₄, N₂O, C₂H₄, O₂ |
| Minimum Detection Range | 1–5 ppm |
| Repeatability | ±0.5% of Full Scale |
| Resolution | 0.1 ppm |
| Response Time (T90) | ≤30 s |
| Zero Drift | ±2.0% of Full Scale per week |