Testing Machine
Filter
Showing 1921–1950 of 3415 results
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QJBLC-73 |
| Drop Height Range | 300–2000 mm |
| Maximum Specimen Weight | 60 kg |
| Maximum Specimen Dimensions | 1000 × 800 × 800 mm |
| Drop Surface Dimensions | 1700 × 1200 × 3015 mm |
| Height Display Accuracy | ≤ ±2% of set value |
| Drop Angle Tolerance | ≤ ±5° |
| Motor Power | 0.5 HP |
| Power Supply | AC 380 V, 50 Hz, 10 A |
| Machine Weight | 435 kg |
| Compliance Standards | ISO 2248, JIS Z0202-87, GB/T 4857.5–1992 |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QJBLC-73 |
| Drop Height Range | 300–2000 mm |
| Max. Specimen Weight | 435 kg |
| Max. Specimen Dimensions | 1000 × 800 × 800 mm |
| Drop Surface Dimensions | 1000 × 800 × 800 mm |
| Height Display Accuracy | ≤ ±2% of set value |
| Drop Angle Tolerance | ≤ ±5° |
| Motor Power | 0.5 HP |
| Power Supply | AC 380 V, 50 Hz, 10 A |
| Overall Dimensions (L×W×H) | ≈ 1700 × 1200 × 3015 mm |
| Machine Weight | 435 kg |
| Compliance | ISO 2248, JIS Z 0202-87, GB/T 4857.5–1992 |
| Accuracy Class | Grade 1 or higher |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | QJDZT-1 |
| Pricing | Available Upon Request |
| Frequency Range | 0.5–600 Hz (±0.1% accuracy) |
| Vibration Axis | Vertical (Y-axis, up/down) |
| Control Modes | Standard Programmable Control (P-series, W-series, T-series) |
| Waveform Options | Sine wave (full-cycle or half-cycle selectable) |
| Output Channels | Dual independent vertical excitation channels — configurable for simultaneous, synchronized, or isolated operation |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QJGO-1 |
| Drop Height | 1000 mm |
| Maximum Specimen Weight | 120 kg |
| Maximum Specimen Dimensions | 500 mm × 1000 mm |
| Drop Surface Dimensions | 500 mm × 1000 mm |
| Rotational Speed | 5 rpm |
| Drop Frequency | 5–15 impacts/min |
| Power Supply | 220 V AC, 1500 W |
| Compliance | GB/T 2423.8, GB 2099–2008, IEC 60068-2-32, IEC 60884-1, EN 50075 |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QJGO-1 Dual-Drum |
| Drop Heights | 500 mm and 1000 mm (dual-position simultaneous operation) |
| Maximum Specimen Weight | up to smartphone-class devices (~250 g typical) |
| Specimen Compatibility | Small electronic consumer products (e.g., mobile phones, Bluetooth earphones, remote controls, power banks, chargers, calculators, CD players, electronic dictionaries) |
| Compliance Standards | GB/T 2423.8, GB 2099–2008, IEC 60068-2-32, IEC 60884-1, EN 50075 |
| Rotation Speed | 5 rpm (fixed-speed motor-driven drum) |
| Drop Frequency | 5–15 impacts per minute |
| Counting Range | 6-digit digital counter |
| Power Supply | 220 V AC, 1500 W total |
| Net Weight | 120 kg |
| Drive System | Gearmotor with speed-reduction gearbox (standard) |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QJLC-2 |
| Maximum Load Capacity | 500 kN |
| Test Range | 20–500 kN (Accuracy: ±1%) |
| Drop Height Adjustment Range | 0–10,000 mm (Resolution: 0.1 mm) |
| Standard Weights | 2, 3, 4, 5, 10, 20, 50, and 100 kg (AISI 1045 steel |
| Mass Tolerance | ±1%) |
| Accuracy Class | Class 1 (per ISO 7500-1) |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QJLC-3 |
| Maximum Load Capacity | 500 kN |
| Test Range | 20–500 kN (Accuracy: ±1%) |
| Drop Height Adjustment Range | 0–10,000 mm (Resolution: 0.1 mm) |
| Standard Weights | 2, 3, 4, 5, 10, 20, 50, and 100 kg (AISI 1045 steel |
| Mass Tolerance | ±1%) |
| Accuracy Class | Class 1 (per ISO 7500-1) |
| Control & Data Acquisition | Integrated QJLC17.7.Ttest Real-Time Impact Analysis Software |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QJLCD-30 |
| Drop Height Range | 400–1800 mm |
| Max. Specimen Weight | 700 g |
| Max. Specimen Dimensions | 350 × 350 × 50 mm |
| Drop Surface Dimensions | 350 × 350 × 50 mm |
| Drop Angle Options | 0°, 45°, 90° |
| Positioning Accuracy | ±0.5 mm |
| Vacuum Suction Cups | Six Ø16 mm units |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Rated Power | 400 W |
| Compressed Air Requirement | ≥0.6 MPa, clean and dry |
| Overall Dimensions | 800 × 900 × 2400 mm |
| Net Weight | 270 kg |
| Compliance | IEC 60068-2-32 |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | QJLCSW-86 |
| Price | USD 7,800 (FOB Shanghai) |
| Drop Height Range | 10–200 mm |
| Maximum Specimen Weight | 2 kg |
| Maximum Specimen Dimensions | 80 × 140 mm |
| Drop Surface Dimensions | W550 × H750 × D650 mm |
| Test Speed | 6–20 cycles/min |
| Control System | PLC + 7-inch HMI touchscreen |
| Power Supply | AC 220 V, 50/60 Hz |
| Pneumatic Source Requirement | ≥0.5 MPa |
| Machine Weight | ~40 kg |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QJNZ-1 |
| Max Torque | 0–10,000 N·m |
| Torque Measurement Range | 0–10,000 N·m |
| Torque Resolution | ±0.001° |
| Torsion Angle Range | 0–±100,000° (4-digit display) |
| Torsion Speed | 0.01–1,000 °/min (infinitely variable) |
| Angular Accuracy | ±0.5% of reading |
| Torque Accuracy | ±0.5% of reading |
| Angular Resolution | ±0.001° |
| Torsion Angle Precision | 0.009° |
| Speed Accuracy | ±0.2% of indicated value |
| Torque Resolution (full scale) | 1/350,000 (no range switching, constant resolution) |
| Maximum Distance Between Grips | 1500 mm |
| Specimen Clamping Diameter | Φ8–Φ40 mm (extendable) |
| Dimensions (L×W×H) | 2800 × 4700 × 1250 mm |
| Weight | 1500 kg |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QJNZ-3(6) |
| Sample Diameter Range | Ø0.1–Ø3 mm |
| Gauge Length | 0–300 mm |
| Pre-tension Force Range | 0.2–350 N |
| Rotational Speeds | 60, 90, 120, 180, 300 rpm |
| Counting Method & Capacity | Electronic digital display, max 9999 revolutions |
| Torsion Modes | Unidirectional, bidirectional (single-cycle programmable) |
| Motor Power & Voltage | 250 W, 380 V AC |
| Dimensions (L×W×H) | 1150 × 410 × 460 mm |
| Net Weight | ~200 kg |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | QJWQ-6(10) |
| Price | USD 9,200 (FOB Shanghai) |
| Wire Diameter Range | 0.3–3 mm (optional up to 6 mm) |
| Sheet Thickness Capacity | 3 mm |
| Bend Cycle Counter Range | 0–9999 |
| Bending Rate | 60 cycles/min |
| Bend Angle per Cycle | ±90° (total 180° reversal) |
| Specimen Length | 150–200 mm |
| Operating Ambient Temperature | 15–30 °C |
| Relative Humidity | ≤85 % RH |
| Dimensions (W×D×H) | 420 × 300 × 1320 mm |
| Net Weight | 350 kg |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QLLC-2 |
| Impact Energy | 500 kN |
| Impact Velocity | 10 m/s |
| Maximum Drop Height | 10,000 mm |
| Accuracy Class | Class 1 |
| Measuring Range | 20–500 kN |
| Full-Scale Accuracy | ±1% |
| Drop Height Resolution | 0.1 mm |
| Standard Weights | 2, 3, 4, 5, 10, 20, 50, and 100 kg (AISI 1045 steel) |
| Weight Tolerance | ±1% |
| Control & Data Acquisition System | Integrated QJLC17.7.Ttest software platform |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QT-10kN·m |
| Max Torque Capacity | 0–10,000 N·m |
| Torque Measurement Accuracy | ±0.5% FS |
| Torque Resolution | 1/350,000 (full-scale, no range switching) |
| Angular Displacement Range | 0 to ±100,000° |
| Angular Resolution | ±0.001° |
| Angular Accuracy | ±0.009° |
| Twist Speed Range | 0.01–1000 °/min (infinitely variable) |
| Speed Accuracy | ±0.2% of indicated value |
| Gauge Length | 1500 mm |
| Specimen Clamping Diameter | Φ8–Φ40 mm (expandable) |
| Overall Dimensions (L×W×H) | 2800 × 4700 × 1250 mm |
| Weight | 1500 kg |
| Compliance | GB/T 9370–1999, JJG 269–1981, GB/T 239–1999 |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | Qingji YL-2000 / YL-3000 |
| Max Load Capacity | 2000 kN / 3000 kN |
| Accuracy Class | Class I (per ISO 7500-1 & ASTM E4) |
| Force Range | 10–2000 kN / 10–3000 kN |
| Loading Rate | 1–15 mm/s (adjustable, closed-loop servo-controlled) |
| Internal Clearance (between platens) | 320 mm |
| Platen Dimensions | 320 × 320 mm or 400 × 400 mm |
| Motor Power | 0.75 kW / 1.1 kW / 2.2 kW |
| Net Weight | 1000 kg / 1500 kg |
| Overall Dimensions (W×D×H) | ~520×450×1350 mm or ~700×540×1800 mm |
| Control System | PC-based servo-hydraulic or electromechanical closed-loop control with real-time data acquisition |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | 212F |
| Instrument Type | Electronic |
| Maximum Test Load | 100 kN |
| Maximum Crosshead Travel | 500 mm |
| Machine Weight | 1450 kg |
| Load Measurement Accuracy | ±0.5% of reading (from 1% FS) |
| Load Control Stability | ±1% of reading |
| Compliant Standards | JJG 276–1988, GB/T 2039–1997, HB 5150–1996, HB 5151–1996 |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | BV212F |
| Maximum Test Load | 100 kN |
| Crosshead Stroke | 200 mm |
| Furnace Temperature Range | Ambient to 1200 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Uniform Temperature Zone Length | >150 mm |
| Furnace Chamber Diameter | φ50 mm |
| Furnace Length | 450 mm |
| Load Measurement Accuracy | ±0.5% of reading (from 1% FS) |
| Load Control Stability | ±1% of setpoint |
| Load Resolution | 0.1 N |
| Deformation Measurement | Imported rotary encoder |
| Deformation Range | Up to 25 mm |
| Deformation Accuracy | ±0.5% |
| Crosshead Speed | 0.01–180 mm/min |
| Power Requirement | 3 kW |
| Machine Weight | 850 kg |
| Compliance | JJG276-88, GB/T 2039-1997, HB 5150-1996, HB 5151-1996 |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | BV212F |
| Instrument Type | Electromechanical |
| Max Test Load | 100 kN |
| Crosshead Travel | 200 mm |
| Furnace Dimensions | Ø50 mm × 450 mm (L) |
| Weight | 850 kg |
| Temperature Range | Ambient to 1200 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Uniform Temperature Zone Length | >150 mm |
| Load Measurement Accuracy | ±0.5% of reading (from 1% FS) |
| Load Control Stability | ±1% of setpoint |
| Load Resolution | 0.1 N |
| Deformation Measurement | High-precision linear encoder |
| Deformation Range | Up to 25 mm |
| Deformation Accuracy | ±0.5% |
| Drive Speed Range | 0.01–180 mm/min |
| Power Requirement | 3 kW |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CY1 Series |
| Price Range | USD 210 – 630 (FOB Shanghai) |
| Capacity Options | 10 N to 500 kN (Standard Ranges: 10, 20, 25, 30, 50, 100, 200, 250, 500, 1000, 2000, 2500, 5000, 10 kN, 20 kN, 30 kN, 50 kN, 100 kN, 200 kN, 300 kN, 500 kN) |
| Brand | Qinji |
|---|---|
| Model | GCP-527 |
| Type | Tri-Station Static Hydrostatic Pressure Tester |
| Compliance | ISO 1167, GB/T 6111 |
| Pressure Range | 0–10 MPa |
| Pressure Resolution | 0.001 MPa |
| Pressure Control Accuracy | ±0.1% of setpoint |
| Temperature Control Range | Ambient to 95 °C |
| Temperature Uniformity | ±1 °C |
| Test Duration Range | 0 min to 9999 h 59 min |
| Time Resolution | 1 s |
| Power Supply (Pressure System) | AC 380 V, 1.5 kW per station |
| Power Supply (Heating System) | AC 380 V, 9 kW total |
| Station Count | 3 independent test stations |
| Sample Diameter | Customizable per user requirement |
| Data Output | Automated calculation and thermal printing |
| Brand | Qinji |
|---|---|
| Model | GO-1 |
| Origin | Shanghai, China |
| Type | Domestic Equipment |
| Drop Height | 500 mm / 1000 mm (dual-position) |
| Drop Frequency | 5–15 impacts/min |
| Drum Rotation Speed | 5 rpm |
| Rated Voltage | 220 V AC |
| Power Consumption | 1500 W |
| Net Weight | 120 kg |
| Compliance | GB/T 2423.8, GB 2099–2008, IEC 60068-2-32, IEC 60884-1, EN 50075 |
| Control | Manual push-button interface with 6-digit mechanical counter |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | 211B |
| Load Capacity | 0–40 kN |
| Load Accuracy | ±0.5% FS |
| Temperature Range | –7 °C to 350 °C (isothermal hold at 350 °C) |
| Heating Rate | ≥5 °C/min |
| Temperature Resolution | 0.1 °C |
| Crosshead Speed | 0.01–500 mm/min (±0.5% accuracy) |
| Effective Test Width | 420 mm |
| Effective Stroke | ~800 mm (extendable) |
| Displacement Measurement Accuracy | ±0.5% |
| Strain/Deformation Measurement Accuracy | ±0.5% |
| Safety Features | Electronic travel limit protection, emergency stop button |
| Machine Weight | 365 kg |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | LCD-30 |
| Drop Height Range | 400–1800 mm (±0.5 mm positioning accuracy) |
| Max. Specimen Weight | 700 g |
| Max. Specimen Dimensions | 350 × 350 × 50 mm |
| Drop Surface Dimensions | 350 × 350 × 50 mm |
| Drop Angles | 0°, 45°, 90° |
| Suction Cup | Six Ø16 mm vacuum cups |
| Compliance | IEC 60068-2-32 |
| Drive System | Servo motor + synchronous timing belt |
| Control System | Touchscreen HMI + PLC |
| Air Supply | ≥0.6 MPa clean compressed air |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Rated Power | 400 W |
| Overall Dimensions | 800 × 900 × 2400 mm |
| Net Weight | 270 kg |
| Drop Surface Material | Granite or concrete (customizable) |
| Surface Roughness | Ra 0.59 µm (granite), Ra 1.29 µm (concrete) |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | NZ |
| Max Torque | 5000 N·m |
| Torque Measurement Range | 50–5000 N·m |
| Torque Resolution | ±0.001° |
| Torsion Angle Range | 0 to ±100,000° |
| Motor Power | 3000 W |
| Torque Measurement Accuracy | ±0.5% FS |
| Torsion Angle Accuracy | ±0.5% FS |
| Angular Resolution | 0.001° |
| Torsion Speed Range | 0.01–1000 °/min (infinitely variable) |
| Effective Gauge Length | 1500 mm |
| Specimen Clamping Diameter | Φ8–Φ40 mm (expandable) |
| Overall Dimensions | 2800 × 4700 × 1250 mm |
| Weight | 1500 kg |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | QJ-2000 Series |
| Max Load Capacity | 2000 N |
| Force Sensor Accuracy | 0.01% FS |
| Test Accuracy | Class 0.5 |
| Repeatability | ≤0.5% |
| Displacement Accuracy | ≤0.2% |
| Strain Measurement Accuracy | ≤0.2% |
| Test Speed Range | 0.01–300 mm/min |
| Compliance | GB/T 6344–1996, GB/T 10807–2006, GB/T 20467–2006 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | QJ-210K Hard Foam Compression Testing Machine |
| Max Load Capacity | 2000 N |
| Force Sensor Accuracy | 0.01% FS |
| Measurement Accuracy | Class 0.5 |
| Repeatability | ≤0.5% |
| Displacement Accuracy | ≤0.2% |
| Strain Measurement Accuracy | ≤0.2% |
| Test Speed Range | 0.01–300 mm/min |
| Instrument Type | Electromechanical Universal Testing Machine |
| Compliant Standards | GB/T 6344–1996, GB/T 10807–2006, GB/T 20467–2006 |
| [Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | QJ-212 |
| Max Test Load | 500 kN |
| Load Accuracy Class | 0.5 |
| Test Stroke | 500 mm |
| Displacement Resolution | ±0.5% of reading |
| Effective Test Width | 520 mm |
| Effective Tensile Travel | 800 mm |
| Speed Range | 0.01–1000 mm/min (standard: 300 mm/min) |
| Speed Accuracy | ±0.5% of set value |
| Force Resolution | 500,000 counts full scale, no internal range switching |
| Control System | Panasonic full-digital AC servo controller |
| Load Cell | High-precision U.S.-sourced sensor |
| Software | Full-digital closed-loop control supporting constant stress, constant strain, and constant displacement modes |
| Safety Protection | Automatic overload cutoff at 110% FS, electronic limit switches, software-based fault diagnosis |
| Power | 2–5 kW |
| Dimensions (W×D×H) | 1000 × 680 × 2450 mm |
| Weight | ~1450 kg] |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | QJ-310 |
| Price Range | USD 3,500 – 4,900 |
| Load Capacity | 2500 N or 5000 N (selectable) |
| Load Cell Accuracy | 0.01% FS |
| Test Accuracy | ±0.5% |
| Speed Range | 0.001–300 mm/min (standard) |
| Effective Test Stroke | ≥200 mm |
| Power Supply | AC 220 V, 50/60 Hz |
| Dimensions (W×D×H) | 600 × 300 × 300 mm |
| Net Weight | ~40 kg |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | QJ-BV212F |
| Maximum Test Load | 300 kN |
| Host Weight | 850 kg |
| Temperature Range | Ambient to 1200 °C |
| Furnace Bore Diameter | φ50 mm |
| Furnace Length | 450 mm |
| Constant-Temperature Zone Length | >150 mm |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Load Measurement Accuracy | ±0.5% of reading (from 1% FS) |
| Load Control Stability | ±1% of reading |
| Load Adjustment Range | 0–100 kN (continuous, multi-range) |
| Load Resolution | 0.1 N |
| Crosshead Speed | 0.01–180 mm/min |
| Stroke | 200 mm |
| Strain Measurement | Imported rod-type encoder |
| Strain Range | 25 mm (multiple ranges available) |
| Strain Accuracy | ±0.5% |
| Power Supply | 3 kW |
| Compliance | JJG 276–1988, GB/T 2039–1997, HB 5150–1996, HB 5151–1996 |
| Brand | Qinji |
|---|---|
| Model | QJ-ICWQ |
| Origin | Shanghai, China |
| Maximum Torque | 10,000 N·mm |
| Torque Measurement Range | 0–10,000 N·mm |
| Torque Resolution | 1–9,999 cycles |
| Torsion Angle Range | ±15° (±1° accuracy) |
| Bending Speed | 29 rpm |
| Test Cycle Count | 1–9,999 |
| Actuator Stroke | ±50 mm |
| Force Accuracy | ±1% (2–100% FS) |
| Dynamic Force Ripple | ≤2% |
| Closed-loop Control Frequency | 10 kHz |
| Waveform Options | Sine, Triangle, Square, Trapezoidal, Sawtooth, Half-sine, Half-triangle, Random, and External Input |
| Frequency Range | 0.01–80 Hz |
| Power Supply | AC 220 V ±5%, 35 W |
| Dimensions (L×W×H) | 670 × 380 × 220 mm |
| Weight | 70 kg |