Industry-specific Instruments
Filter
Showing 4171–4200 of 6344 results
| Brand | RELION |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RELION VII CL |
| Pricing | Available Upon Request |
| Beam Voltage | 0–30 kV (continuously adjustable, typically operated ≤25 kV) |
| Beam Current | 0–1 mA (continuously adjustable, with overload protection) |
| Vacuum Chamber Material | Non-magnetic stainless steel (inert-gas welded) |
| Observation Windows | Standard 40 mm Ø leaded glass window (3 mm thick) + optional 20 mm concave macro window |
| Sample Stage Capacity | Accommodates up to three standard thin sections (50.8 mm × 76.2 mm) or two elongated wafers |
| Focusing Range | Spot focus (down to 0.1 mm), field focus, and defocused modes |
| Beam Deflection | Electromagnetic scanning via precision deflection magnets |
| Vacuum Performance | Dual-stage rotary vane pump with mist eliminator |
| Power Rating | ≥800 W |
| Microscope Compatibility | Designed for integration with optical microscopes (reflected/transmitted light), SEMs, and custom vacuum-compatible imaging platforms |
| Compliance | Engineered for GLP-aligned laboratory environments |
| Brand | Renhe |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | MOBILE FUEL LAB |
| Pricing | Upon Request |
| Brand | RenKe |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Model | RS-GZ-DC |
| Pricing | Upon Request |
| Accuracy | ±7% (at 25°C) |
| Illuminance Range | 0–65535 lux |
| Long-term Stability | ≤5%/year |
| Response Time | 1 s |
| Output Signal | Radio Frequency (RF) Wireless Transmission |
| Brand | VINCI |
|---|---|
| Origin | France |
| Model | FDS 700 |
| Operating Temperature Range | Up to 200 °C |
| Maximum Confining Pressure | 70 MPa |
| Maximum Pore Pressure | 50 MPa |
| Flow Rate Range | 0.1–6,000 mL/min |
| Core Sample Diameter | 25.4 mm (1 in) and 38.1 mm (1.5 in) |
| Core Length | Up to 100 mm |
| Data Acquisition | 16-bit resolution, 1 kHz sampling rate |
| Control Interface | Ethernet-connected PC with proprietary software |
| Brand | VINCI (France) |
|---|---|
| Origin | France |
| Model | RFP 1000 |
| Type | Reservoir Fluid Particle Precipitation Analyzer |
| Detection Principle | Near-Infrared Laser Scattering + Real-Time Visual Monitoring |
| Application Focus | Asphaltene and Wax Precipitation Onset Determination under Controlled Temperature & Pressure |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | B-Series High-Precision Tree Micro-Drill Resistograph |
| Pricing | Available Upon Request |
| Detection Depth | 300 / 400 / 1000 mm |
| Penetration Speed | 6–50 cm/min |
| Resolution | 0.04 mm |
| Data Storage Capacity | 256 kB (≈8 m) / 512 kB (≈18 m) / 1 MB (≈38 m) |
| Probe Lifetime | ~200 drillings |
| Data Output | Integrated thermal printer + USB/RS-232 PC download |
| Charger Input | 220 V / 110 V AC |
| Battery | 36 V NiCd rechargeable |
| Operating Temperature | 0–50 °C |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | E-Series Field-Portable Tree Diagnostic Drill Probe |
| Pricing | Available Upon Request |
| Penetration Depth | 300/400 mm |
| Penetration Speed | 10–45 cm/min |
| Spatial Resolution | 0.1 mm |
| Data Storage Capacity | 256 KB (~20 m), 512 KB (~40 m), or 1 MB (~90 m) |
| Probe Lifetime | 200–300 insertions in softwood, 50–100 in hardwood |
| Data Output | Real-time thermal strip printing + USB download to PC |
| Charger Input | 110 V / 220 V AC |
| Battery | 7.2 V, 1.7 Ah / 2.0 Ah NiCd |
| Operating Temperature | 0–50 °C |
| Brand | Rinntech |
|---|---|
| Country of Origin | Germany |
| Model | RESISTOGRAPH® |
| Probe Diameter | 1.5 mm |
| Max. Penetration Depth | 45 cm (standard, optional range: 30–100 cm) |
| Penetration Speed | up to 50 cm/min |
| Spatial Resolution | 0.1 mm or 0.01 mm (selectable) |
| Device Weight | 3 kg |
| Onboard Data Storage | up to 500 resistance profiles |
| Integrated Thermal Printer | 1:1 real-time output |
| Power Supply | 12 V rechargeable battery |
| Included Software | DECOM Analysis Suite (profile visualization, editing, quantitative analysis, CSV/Excel export) |
| Origin | Denmark |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SeaBat T20-P |
| Price | USD 100,000 (FOB Copenhagen) |
| Operating Frequency | 200–400 kHz |
| Beam Count | 512 |
| Max Swath Width | 140° (up to 165° in FlexMode) |
| Depth Range | 0.5–400 m (at 200 kHz) |
| Ping Rate | Up to 50 Hz |
| Vertical Beamwidth | 1.1° @ 400 kHz / 2.2° @ 200 kHz |
| Horizontal Beamwidth | 1.1° @ 400 kHz / 2.2° @ 200 kHz |
| Depth Resolution | 6 mm |
| Transducer Housing Material | Titanium Alloy |
| Submerged Weight | <8 kg (combined Tx/Rx) |
| Processor IP Rating | IP54 |
| Power Input | 24 VDC or 100–230 VAC, 50/60 Hz |
| Max Power Consumption | 300 W (peak) |
| Operating Temperature (Processor) | –2°C to +40°C |
| Operating Temperature (Transducer) | –2°C to +30°C |
| Cable Length (standard) | 10 m (25 m / 50 m optional) |
| Pressure Rating (Transducer) | 50 m |
| Origin | Denmark |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SeaBat T20-S |
| Price | USD 100 (FOB) |
| Operating Depth | Up to 6000 m |
| Housing Material | Titanium Alloy (6″ pressure housing) |
| Onboard Storage | 1 TB SSD |
| Beam Count | Up to 512 beams |
| Swath Width | Up to 165° |
| Frequency | 200–400 kHz |
| Vertical Beamwidth | 1.1°–2.2° (nominal) |
| Horizontal Beamwidth | 1.1°–2.2° (nominal) |
| Depth Range | 0.5–500 m |
| Ping Rate | Up to 50 Hz |
| Pulse Width | 30–10,000 µs (CW/FM modes) |
| Depth Resolution | 6 mm |
| Transducer Weight (air/water) | 5.0–5.4 kg / 3.4–4.2 kg |
| Portable Processor Dimensions | 131 × 424 × 379 mm |
| Portable Processor Weight | 14 kg |
| IP Rating | IP54 |
| Operating Temp (Processor) | −2°C to +40°C |
| Operating Temp (Transducer) | −2°C to +30°C |
| Power Input | 24 VDC or 100–230 VAC, 50/60 Hz |
| Power Consumption | 200 W (std), 300 W (peak) |
| Cable Length (standard) | 10 m (25 m / 50 m optional) |
| Brand | SETA |
|---|---|
| Origin | United Kingdom |
| Model | RPV-1 |
| Compliance | ASTM D789, ISO 307, ASTM D4603, ASTM D2857, ASTM D1795, SCAN CM15:99, TAPPI T230-om94, ASTM D1243, USP <911>, ISO 1628 |
| Timing resolution | 0.001 s |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | Micro-Z ULS |
| Detection Principle | Wavelength Dispersive X-ray Fluorescence (WDXRF) |
| Detection Limit | 0.2 ppm |
| Measurement Range | 0–5 wt% |
| Analysis Time | < 300 s |
| Excitation Source Power | 80 W |
| Vacuum Requirement | Yes (gas-free operation) |
| Power Supply | AC 200–240 V, 200 W |
| Operating Environment | 10–40 °C, RH < 80 % |
| Dimensions (W×D×H) | 45 × 41 × 43 cm |
| Weight | 40 kg |
| Compliance Standards | ASTM D2622, GB/T 11140, SH/T 0842 |
| Key | Brand: Rigaku |
|---|---|
| Origin | USA |
| Model | NEX QC |
| Detection Principle | Energy-Dispersive X-Ray Fluorescence (EDXRF) |
| Analyte | Total Sulfur |
| Detection Limit | 5 ppm |
| Measurement Range | 0–10 wt% |
| Sample Volume | 5 mL |
| Analysis Time | 1–999 s (default 300 s) |
| Calibration Method | Compton Scattering C/H Ratio Correction |
| Data Output | USB + Ethernet |
| Environmental Requirements | RH < 85% (no condensation), vibration-free, non-corrosive atmosphere |
| Compliance Standards | ASTM D4294, GB/T 17040 |
| Brand | Rigaku |
|---|---|
| Origin | USA |
| Model | NEX QC+ |
| Detection Principle | Energy-Dispersive X-ray Fluorescence (EDXRF) |
| Detection Limit | 2.3 ppm for S |
| Measurement Range | 0–10 wt% S |
| Accuracy (Relative Error) | ±0.0001 |
| Analysis Time | < 3 min (configurable from 1–999 s) |
| Sample Volume | < 5 mL |
| Elemental Range | Na (11) to U (92) |
| Compliance | ASTM D4294, GB/T 17040 |
| Portability | Handheld / Field-Deployable |
| Environmental Operating Range | 15–35 °C, RH < 85% (non-condensing) |
| Data Interface | USB + Ethernet |
| Matrix Correction | Compton Scattering C/H Ratio Normalization |
| Filtration | Multi-layer Composite Primary Beam Filters |
| Safety | Zero hazardous waste generation (no gas, liquid or solid effluent) |
| Brand | Rigaku |
|---|---|
| Origin | Japan |
| Model | Supermini200+ |
| X-ray Tube | Pd anode, 50 kV / 4 mA, 200 W |
| Detection Limits | S: 0.1 ppm, Cl: 0.1 ppm, Si: 0.5 ppm, As: 0.2 ppm |
| Detection Range | 0–99.99% |
| Standard Compliance | SH/T 0842 (S), SH/T 0977 (Cl), SH/T 0993 (Si) |
| Optical System | Automated multi-crystal spectrometer with high-resolution crystal selection |
| Sample Handling | 12-position automatic sampler |
| Sample Types | Liquids (gasoline, diesel, naphtha, jet fuel, crude oil, residuum, water, wastewater), solids (catalysts, polypropylene, powders) |
| Brand | RIKEN KEIKI |
|---|---|
| Origin | Japan |
| Model | SD-2500 |
| Detection Principle | Catalytic Bead (Pellistor) Combustion |
| Explosion Protection Rating | Ex d IIB T4 Gb |
| Operating Temperature Range | 0–250 °C |
| Display | Integrated LED Concentration Indicator |
| Input Power | 24 V DC (loop-powered) |
| Output Signal | 4–20 mA analog output with HART protocol support |
| Certifications | JIS ATEX, IECEx, UL/cUL Class I Div 1, FM Approved |
| Enclosure Rating | IP66/IP67 |
| Sensor Life Expectancy | ≥3 years typical in clean air environments |
| Brand | Rinntech |
|---|---|
| Origin | Germany |
| Instrument Type | Forestry-Specific Densitometer & Digital Wood Microstructure Analyzer |
| Measurement Principle | High-Frequency Electromagnetic Sensing (Non-Ionizing) + Optical Micro-Imaging |
| Max Sample Length | 500 mm |
| Spatial Resolution | ≤20 µm |
| Safety Compliance | No ionizing radiation (X-ray-free operation) |
| Core Modules | LignoTrim (precision surface planer), LignoScan (EM density scanner), LignoScop (micro-optical imager), LignoVision (dedicated image analysis software) |
| Origin | Denmark |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | Risø DA20 C/D Luminescence Dating System |
| Price | Upon Request |
| Brand | RIVERD |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | gen2-SCA |
| Pricing | Available Upon Request |
| Brand | RK |
|---|---|
| Origin | UK |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Esiproof |
| Pricing | Available Upon Request |
| Brand | RK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Flexiproof |
| Pricing | Available Upon Request |
| Maximum Web Speed | 99 m/min |
| Print Area | 240 × 75 mm |
| Proofing Area | 250 × 80 mm |
| Anilox Roll Line Count | Up to 1000 lpi |
| Compatible Ink Systems | Water-based, Solvent-based, UV-curable Flexographic Inks |
| Roll Types | Interchangeable Ceramic or Metal Anilox Rolls |
| Dual-Ink Capability | Yes (with dual doctor blade and segregated ink chambers) |
| Doctor Blade Safety Guard | Integrated |
| Substrate Compatibility | Flexible Films, Papers, Foils, Nonwovens |
| Brand | RK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GP100 |
| Pricing | Available Upon Request |
| Brand | RK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | K Printing Proofer |
| Pricing | Available Upon Request |
| Brand | RK |
|---|---|
| Origin | United Kingdom |
| Model | RK K101 |
| Coating Width | 170 × 250 mm |
| Bed Type | Vacuum, Magnetic, Heated & Glass Options Available |
| Standard Speed Range | 2–15 m/min |
| Drive Option | Electric or Pneumatic |
| Compliance | ASTM D823-53, BS 3900 Part 5 |
| Wet Film Thickness Range | 4–150 µm (via standardized wire-wound applicator rods) |
| Bed Configuration | Modular interchangeable substrate holders |
| Brand | RK |
|---|---|
| Origin | United Kingdom |
| Model | K202 |
| Coating Width Options | 325 × 250 mm (standard), up to 841 × 1189 mm (A0) |
| Coating Speed Range | 2–15 m/min |
| Drive Type | Electric or Pneumatic (configurable) |
| Substrate Holding | Vacuum, Magnetic, Heated, and Glass Beds |
| Compliance | ASTM D823-53, BS 3900 Part 5 |
| Wet Film Thickness Range | 4–150 µm (via standardized wire-wound drawdown bars) |
| Bed Type Compatibility | A-type vacuum, B-type vacuum, magnetic, heated, and glass beds |
| Brand | RK |
|---|---|
| Origin | United Kingdom |
| Model | K303 |
| Coating Speed Range | 1–39 m/min |
| Standard Substrate Support | Tri-layer composite pad (Melinex®/foam/rubber) |
| Optional Substrate Platforms | Vacuum, magnetic, heated, or glass-backed |
| Coating Method | Wire-wound rod (metering rod) with precision wound stainless steel wire |
| Wet Film Thickness Range | 4–120 µm (standard wound rods) |
| Drive Type | Electric or pneumatic (ATEX-compliant for hazardous areas) |
| Rod Cleaning | Integrated comb-style cleaning plate |
| Compliance | Designed for ISO 2836-1 (printing inks), ASTM D823 (coating application), and GLP-aligned lab workflows |
| Brand | RK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | KPA |
| Power Supply | 220 V, 50 Hz |
| Coating Speed | 2–15 m/min (adjustable) |
| Compliance | ASTM D823-92a |
| Standard Bed | Tempered Glass Impression Bed |
| Compatible Applicators | Doctor Blade (Bird), Quadrant, Adjustable Micrometer, and Square-Edge Applicators |
| Optional Beds | Vacuum, Magnetic, or Heated Impression Beds |
| Sample Substrates | Cardstock, Steel Panels, and Other Rigid Flat Substrates |
| Brand | RK |
|---|---|
| Origin | United Kingdom |
| Model | KPP |
| Printing Speed | Up to 40 m/min |
| Substrate Compatibility | Films, paper, thin boards, aluminum foil, PVC |
| Engraved Cylinder Control | Micrometer-adjustable doctor blade pressure |
| Multi-ink Simultaneous Printing | Yes |
| Flexographic & Lamination Proofing Capability | Via interchangeable print head modules |
| Footprint | 400 × 500 mm |
| Standard Engraving Plates | Type A (solid), B (triple-pattern), C (1+4 gradient), D (dual-octave gradient) — all at 150 lpi (60 cm⁻¹) unless specified |
| Plate Line Screen Options | 100–200 lpi (40–80 cm⁻¹) |
| Solid Area Density Range | 60–100% |
| Gradient Resolution | Stepwise or continuous per plate type |
| Brand | RK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PIP |
| Pricing | Upon Request |
| Brand | RK |
|---|---|
| Origin | United Kingdom |
| Model | ROTARY KOATER |
| Web Width | 305 mm |
| Speed Range | 0.4–90 m/min |
| Printing/Coating Systems | ≥15 configurations |
| Coating Methods | Gravure (direct & reverse), Flexographic, Rotary Screen, Wire Rod, Doctor Blade, Slot Die, and Metering Roll |
| Drying/Curing Options | Hot Air, Infrared (IR), Ultraviolet (UV) |
| Lamination Modes | Wet & Dry |
| Application Scope | R&D, Pilot Production, Specialty Substrate Evaluation |
| Installed Base | >200 units worldwide |