- All
- Favorite
- Popular
- Most rated
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-150-BK-S |
| Quotation | Upon Request |
| Test Medium | Municipal Tap Water |
| Max Test Pressure | 0–1500 bar (150 MPa) |
| Drive Air Pressure | 6.9 bar |
| Pressure Ramp Rate | 100–6000 bar/min (adjustable) |
| Pressure Measurement Accuracy | Class 0.5 (high-precision transducer) |
| Power Supply | 220 V, 50 Hz, 0.15 kW |
| Drive Method | Pneumatically Actuated Dual-Pump System |
| Air Supply Requirement | 3–6.9 bar, 2 m³/min |
| High-Pressure Outlet | 1 × G1/4″ internal thread (600 series) |
| Control Cabinet Dimensions | 800 × 700 × 1500 mm |
| Test Chamber Dimensions | 2000 × 900 × 1200 mm (304 stainless steel, with integrated water recovery sump and stainless mesh tray) |
| Brand | Jiubin |
|---|---|
| Model | JB |
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Pricing | Available Upon Request |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-B |
| Pricing | Available Upon Request |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-400H |
| Compliance | GB/T 3682.1–2018, ISO 1133–1:2011, ASTM D1238 |
| Temperature Control Range | Ambient to 400 °C (±0.2 °C stability) |
| Load Options | 0.325–21.6 kg (standard weights per ISO/ASTM) |
| Extrudate Cutting | Automatic timer-based or manual |
| Piston Travel Resolution | 0.01 mm |
| Data Output | MFR (g/10 min), MVR (cm³/10 min), flow rate curve |
| Power Supply | AC 220 V ±10%, 50/60 Hz |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-150-BK |
| Test Medium | Municipal tap water or customer-specified fluid |
| Max Test Pressure | 0–1500 bar (150 MPa) |
| Drive Air Pressure | 6.9 bar |
| Pressure Ramp Rate | 100–6000 bar/min (adjustable) |
| Pressure Measurement Accuracy | ±0.5% FS (high-precision strain-gauge transducer) |
| Power Supply | 220 V, 50 Hz, 0.15 kW |
| Drive Method | Pneumatically actuated dual-pump system (low- and high-pressure stages) |
| Air Supply Requirement | 3–6.9 bar, ≥2 m³/min |
| High-Pressure Outlet | 1 × G1/4" internal thread (600 psi rated) |
| Control Cabinet Dimensions | 800 × 700 × 1500 mm |
| Test Chamber Dimensions | 2000 × 900 × 1200 mm (2 mm steel + energy-absorbing buffer layer) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-JM8 |
| Test Medium | Hydraulic Oil or Ethylene Glycol Mixture |
| Max Test Pressure | 0–5 MPa (adjustable) |
| Pressure Control Accuracy | ±0.01 MPa (full scale dependent) |
| Pulse Frequency | 5–120 cycles/min (adjustable) |
| Pulse Waveform | Square or Trapezoidal (pulse width configurable per user requirement) |
| Test Medium Temperature Range | Ambient to 160 °C |
| Environmental Temperature Range | –30 °C to 250 °C (adjustable) |
| Maximum Continuous Cycles | ≥1,000,000 |
| Control Method | PC-based Automated Control with Servo/Proportional Actuation |
| Data Interface | USB for data export and report printing |
| Compliance | Designed for ISO 6803, ISO 7241-2, SAE J1401, ASTM D3078, and GB/T 5563 testing protocols |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-600-5 |
| Sinusoidal Force Range | 9800–49000 N |
| Rated Frequency Range | 5–3000 Hz |
| Peak Velocity | 1020 m/s |
| Zero-Load Acceleration | 1.5 m/s² |
| Peak-to-Peak Displacement | 51 mm |
| Payload Capacity | 140–1000 kg |
| Power Consumption | 22–76 kVA |
| Supply Voltage | AC 380 V ±10%, 50 Hz |
| Moving Coil Mass | 3–50 kg |
| Power Amplifier Weight | 250–800 kg |
| Cooling Method | Forced Air |
| Compliance | GB/T 13310-91, Q/320502SN001-2003 |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-JM8 |
| Type | Hydraulic Pressure Test System |
| Max Test Pressure | 0–400 MPa |
| Pressure Control Accuracy | ±1% F.S. |
| Measurement Accuracy | ±0.075% F.S. |
| Timing Range | 0–999 h |
| Test Media | Water, Hydraulic Oil, or Custom Fluids |
| Media Temperature Range | Ambient to 150 °C ±3 °C |
| Drive Air Supply | 3–8 bar |
| Power Supply | AC 220 V |
| Control Options | Manual / PLC / Computer-Controlled (SCADA-Compatible) |
| Test Stations | Single or Multi-Station (Customizable) |
| Sealing Architecture | Non-Welded, Modular Tubing Connections |
| Safety Response | Automatic Pressure Dump & Pump Shutdown upon Burst Detection |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM8 |
| Pricing | Available Upon Request |
| Test Medium | Oil, Water, or Ethylene Glycol Mixture |
| Medium Temperature Range | Ambient to 130 °C |
| Maximum Pulse Pressure | 0–70 MPa |
| Pressure Control Accuracy | ±0.01 MPa |
| Pulse Waveform | Square or Stepped Profile |
| Pulse Frequency | 5–60 cycles/min |
| Maximum Continuous Test Cycles | >100,000 (single run) |
| Continuous Operation Duration | ≥240 hours (10 days) |
| Compliance | Designed for ISO 6803, SAE J1401, GB/T 5563, ISO 6802, and FMVSS 106 test protocols |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | JB |
| Pricing | Available Upon Request |
| Brand | JByq |
|---|---|
| Origin | Shanghai, China |
| Model | JB-300A |
| Instrument Type | Benchtop True Density Analyzer |
| Application Scope | Universal for Solids & Liquids |
| Density Range | 0.0001–99.9999 g/cm³ |
| Density Resolution | 0.0001 g/cm³ |
| Weighing Capacity | 0.001–200 g |
| Measurement Time | ~5 s |
| Water Tank Dimensions (Std) | 169 mm × 98 mm × 83 mm |
| Temperature Compensation | Real-time water temperature input |
| Interface | RS-232C |
| Compliance | ASTM D792, ASTM D297, ISO 1183, ISO 2781, GB/T 1033, GB/T 2951, JIS K6268, DIN 53516 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-JM8 |
| Test Pressure Range | 0–100 MPa (customizable) |
| Pulse Frequency | 0–2 Hz (customizable) |
| Test Media | Water, Brake Fluid, Hydraulic Oil |
| Media Temperature Range | −40 °C to +150 °C (customizable) |
| Cycle Count Capacity | >10⁷ cycles (user-definable) |
| Channel Configuration | 1 channel (expandable) |
| Waveform Options | Square, T-shaped, Triangular, Sine |
| Control Architecture | Dual-level PC-based electro-hydraulic servo control with independent modular controllers |
| Pressure Regulation Method | Accumulator-assisted passive pressure maintenance |
| Safety Features | Overpressure cutoff, overload protection, automatic depressurization upon rupture, auto-degassing at startup, post-test fluid containment |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM8 |
| Pricing | Available Upon Request |
| Test Pressure Range | 0–100 MPa |
| Pressure Control Accuracy | ±0.1 MPa |
| Test Media | Compressed Air, Nitrogen, Oxygen, or Other Inert Gases |
| Number of Test Ports | 1 (Configurable) |
| Control System | Servo-Driven Pressure Regulation with PC Interface |
| Data Output | Real-Time Pressure Curve Display, USB Storage, Printable Test Reports |
| Structural Design | Fully Enclosed Frame with Castor-Mounted Mobility |
| Compliance | Designed for ISO 5208, ASTM E493, and EN 1759-2 Prequalification Requirements |
| Brand | JB-Bin |
|---|---|
| Origin | Shanghai, China |
| Model | JM8 |
| Test Medium | Oil, Water, or Ethylene Glycol Mixture |
| Max Pulse Pressure | 0–70 MPa (adjustable, optional higher range) |
| Pressure Control Accuracy | ±0.01 bar |
| Pulse Frequency | 0–2 Hz (dependent on specimen volume and compliance) |
| Waveform Options | Square, T-wave, Triangular, Sine |
| Test Temperature Range | –40 °C to +150 °C (±3 °C) |
| Cycle Capacity | ≥100,000 cycles per continuous test run |
| Continuous Operation Duration | ≥720 hours (30 days) |
| Specimen Capacity | 2–8 units (configurable per system setup) |
| Mounting Angles | 90° or 180° per ISO 6803 / SAE J1401 / GB/T 14904 compliance |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-C5 |
| Wind Pressure Range | –8000 to +8000 Pa (for wind load resistance) |
| Air Flow Rate | 0–540 m³/h |
| Water Spray Rate | 2–3 L/m²·min |
| Displacement Measurement Range | 0–50 mm |
| Specimen Size Capacity | 0.8 × 0.8 m to 3.0 × 3.0 m |
| Power Supply | AC 380 V, 50 Hz, 20 kW |
| Required Installation Space | 6 m × 5 m × 3.6 m |
| Accuracy Class | 0.25 (pressure), 3 (air flow), 2.5 (spray), 0.2 (displacement) |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-WD2D |
| Table Diameter | 800 mm |
| Tilting Range | 0–30° ±1° |
| Max Load Capacity | 120 kg |
| Actuation Mode | Manual |
| Rotation Speed | 1 rpm |
| Compliance | GB 4706-1:20.1, IEC 60335-1:20.1 |
| Optional UL-Compliant Range | 0–42° (custom order) |
| Brand | Jiubin |
|---|---|
| Model | JB-UV |
| Origin | Shanghai, China |
| Type | UV Germicidal Conveyor Tunnel |
| UV Lamp Configuration | 16 × 20 W low-pressure mercury lamps (254 nm peak) |
| Effective UV Irradiation Zone | 1000 mm |
| Conveyor Length | 2000 mm |
| Inlet/Outlet Height | 200 mm (adjustable) |
| Inlet/Outlet Width | 500 mm |
| Conveyor Height from Floor | 750 ± 50 mm |
| Lamp Tube Length | 600 mm |
| Safety Protections | Overvoltage/overcurrent protection, fault alarm indicator, motor overload protection |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-150-BK-S |
| Max Test Pressure | 0–1500 bar (150 MPa) |
| Test Medium | Municipal Tap Water |
| Drive Air Pressure | 3–6.9 bar |
| Air Flow Rate | 2 m³/min |
| Pressure Control Accuracy | ±10 bar (hold), ±0.5% FS (sensor) |
| Pressure Ramp Rate | 100–6000 bar/min (adjustable) |
| Power Supply | 220 V, 50 Hz, 0.15 kW |
| Control Interface | Integrated Touchscreen PC with A4 Report Export |
| Dimensions (Control Cabinet) | 800 × 700 × 1500 mm |
| Dimensions (Test Chamber) | 2000 × 900 × 1200 mm |
| Construction | 304 Stainless Steel Chamber + Dual-Pump Air-Driven Hydraulic System |
| Safety Features | Explosion-Resistant Tempered Glass Lid, Automatic Depressurization, Dual-Stage Filtration |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-JM8 |
| Test Medium | Hydraulic Oil or Ethylene Glycol Mixture |
| Max Test Pressure | 0–5 MPa (adjustable) |
| Pressure Control Accuracy | ±0.01 MPa (full scale dependent) |
| Pulse Frequency | 5–120 cycles/min (adjustable) |
| Pulse Waveform | Square or Trapezoidal (pulse width configurable per user specification) |
| Test Medium Temperature Range | Ambient to 160 °C |
| Environmental Temperature Control Range | −30 °C to 250 °C |
| Maximum Continuous Cycles | >1,000,000 |
| Control Method | PC-based Automated Control with Servo/Proportional Actuation |
| Compliance | Designed for ISO 6803, SAE J1402, GB/T 5563, and ASTM D380-conforming validation protocols |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-JM8 |
| Type | Dual-Pulse Hydraulic Fatigue Testing System |
| Origin | Shanghai, China |
| Application | Pressure cycling fatigue testing of pressurized components |
| Control | Computer-controlled servo/proportional hydraulic system |
| Max. Test Cycles | ≥1,000,000 cycles (continuous) |
| Test Medium | Hydraulic oil or ethylene glycol–water mixture |
| Pressure Range | 0–5 MPa (adjustable) |
| Pressure Control Accuracy | ±0.01 MPa (full-scale dependent) |
| Pulse Frequency | 5–120 cycles/min (programmable) |
| Pulse Waveform | Square or trapezoidal (pulse width configurable per user specification) |
| Fluid Temperature Range | Ambient to 160 °C (user-defined setpoint) |
| Environmental Chamber Temp. Range | –30 °C to +250 °C (optional integrated thermal enclosure) |
| Data Acquisition | Real-time pressure vs. time curve logging, USB export, automated report generation |
| Compliance Support | Designed to support ASTM D3078, ISO 6803, SAE J1402, GB/T 10544, and internal OEM validation protocols |
| Key | Brand: JB Instruments |
|---|---|
| Model | JB-150-BK-S |
| Origin | Shanghai, China |
| Drive Medium | Compressed Air (3–6.9 bar) |
| Test Medium | Municipal Tap Water |
| Max Test Pressure | 0–1500 bar (150 MPa) |
| Pressure Control Accuracy | ±10 bar (hold), ±0.5% FS (sensor) |
| Pressure Ramp Rate | 100–6000 bar/min (adjustable) |
| Power Supply | 220 V, 50 Hz, 0.15 kW |
| High-Pressure Outlet | 1 × G1/4 internal thread (600 series) |
| Cabinet Dimensions | 800 × 700 × 1500 mm |
| Test Chamber Dimensions | 2000 × 900 × 1200 mm (304 stainless steel, dual-zone with integrated water recovery tank) |
| Safety Features | Blast-resistant tempered glass lid, automatic pressure relief, real-time curve logging, audit-ready data export |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-400H |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Pricing | Available Upon Request |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-400H |
| Compliance | GB/T 3682.1–2018, ASTM D1238, ISO 1133–1 |
| Temperature Control Range | 100–400 °C (±0.2 °C) |
| Load Options | 0.325 kg, 1.2 kg, 2.16 kg, 5.0 kg, 10.0 kg, 21.6 kg |
| Piston Travel Detection | High-resolution optical encoder (0.01 mm resolution) |
| Extrudate Cutting | Automatic timed or manual mode |
| Sample Preheating Time | Programmable (0–999 s) |
| Data Output | USB and RS232 interfaces |
| Display | 7-inch TFT touchscreen with real-time melt flow curve visualization |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-B |
| Price Range | USD 11,200 – 21,000 |
| Sensor Dimensions | 460 mm × 620 mm |
| Active Sensing Area | 400 mm × 400 mm |
| Sensor Resolution | 2,288 discrete pressure points |
| Thickness | 0.2 mm |
| Maximum Load Capacity | 100 kg (≈981 N) |
| Accuracy | ±10% FS (as-received), ±5% FS (post-calibration) |
| Operating Temperature | −9 °C to +60 °C |
| Interface | USB 2.0 |
| Power Supply | Bus-powered via USB |
| Sampling Rate | 0–100 Hz |
Show next