- All
- Favorite
- Popular
- Most rated
| Brand | Jiubin |
|---|---|
| Model | JB-2025 |
| Origin | Shanghai, China |
| Temperature Range | Ambient to 230 °C (±0.3 °C) |
| Temp. Resolution | ±0.01 °C |
| Heating Rate | 30–190 °C in <6 min |
| Cavity Type | Sealed dual-conical oscillating cavity |
| Cavity Gap | 0.45 mm (standard) |
| Drive System | Direct-drive servo motor |
| Oscillation Frequencies | 0.1, 0.5, 1.0, 1.67, 2.0, 20 Hz |
| Oscillation Angles | ±0.2°, ±0.5°, ±1.0°, ±7.143° |
| Strain Amplitudes | ±2.8%, ±7%, ±14%, ±100% |
| Torque Range | 0.01–200 dNm |
| Torque Resolution | 0.01 dNm |
| Torque Accuracy | ±0.5% |
| Closure Force | ≥11.5 kN |
| Sample Volume | ~4.5 cm³ |
| Compliance | ASTM D5289, D6204, D6601 |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-10 |
| Type | Single-Plate Side-Slip Test Bench for Motor Vehicle Wheel Alignment Verification |
| Max. Axle Load | 10 t |
| Measurement Range | ±10 m/km |
| Indication Error | ≤ ±0.2 m/km |
| Zero Offset Error | ±0.2 m/km |
| Sliding Plate Dimensions | 500 mm × 700 mm |
| Overall Bench Dimensions (L×W×H) | 800 mm × 900 mm × 100 mm |
| Approach Ramp Dimensions | 800 mm × 500 mm |
| Compliance Standard | JT/T 507–2004 |
| Key | Brand: JB-Brookline |
|---|---|
| Origin | Shanghai, China |
| Model | JB-GC |
| Pressure Range | 0–10 MPa |
| Pressure Display Resolution | 0.001 MPa |
| Pressure Control Accuracy | +2% (upper limit), −1% (lower limit) |
| Temperature Range | Ambient to 95 °C |
| Temperature Uniformity | ±1 °C |
| Test Duration Capacity | 0 min to 9999 h 59 min |
| Max Sample Diameter | Ø630 mm |
| Power Supply (Pressure System) | AC 220 V, 1.5 kW |
| Power Supply (Temperature System) | AC 380 V, 4.5 kW |
| Compliance | GB/T 6111, GB/T 15560, ASTM D1598, ASTM D1599, ISO 1167-1:2014, ISO 1167-2:2014, EN ISO 12093, USP <661>, FDA 21 CFR Part 11 (via optional software audit trail) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model Range | 40–220 mm ID |
| Pricing | Available Upon Request |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-512 |
| Pricing | Available Upon Request |
| Chamber Volume | 0.5 m³ |
| Electrode Dimensions | 5 mm (L) × 2 mm (W) × 12 mm (H) |
| Electrode Material | Platinum |
| Electrode Edge Angle | 30° bevel |
| Electrode Spacing | 4.0 mm |
| Electrode Contact Force | 1.0 N |
| Test Voltage Range | 100–600 V (adjustable) |
| Power Supply Rating | 2100 W |
| Voltage Drop at 1.0 A Short-Circuit Current (600 V) | ≤50 V |
| Tracking Detection Threshold | ≥0.5 A sustained for 2 s |
| Droplet Height Adjustment Range | 30–40 mm |
| Droplet Density | 44–55 drops/cm³ |
| Droplet Interval | 30 ± 5 s |
| Brand | Jiubin |
|---|---|
| Model | JB-3009 |
| Load Range | 0–5 N |
| Accuracy Class | 0.5 |
| Traverse Distance | 70 mm / 150 mm |
| Standard Sled Mass | 200 g |
| Test Speed | 100 mm/min |
| Operating Temperature | 10–40 °C |
| Relative Humidity | 20–70 % RH |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 400 × 300 × 180 mm |
| Weight | 10 kg |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-280C |
| Standard Compliance | GB/T 3682, ISO 1133-1:2011, ASTM D1238 |
| Temperature Range | 50–450 °C |
| Temperature Accuracy | ±0.2 °C |
| Resolution | 0.1 °C |
| MFR Range | 0.1–800.00 g/10 min |
| MVR Range | 0.1–800.00 cm³/10 min |
| Load Levels | 5 standard weights (3.185 N to 49 N) |
| Barrel ID | 9.550 ± 0.025 mm |
| Die ID | 2.095 ± 0.005 mm |
| Piston Stroke Detection | ±0.1 mm over 30 mm travel |
| Power Consumption | ≤500 W |
| Temperature Recovery Time | ≤4 min |
| Control System | Industrial PLC with LCD HMI + PC-based data interface |
| Cutting Modes | Manual, Time-controlled, Auto-triggered |
| Measurement Methods | Mass Flow Rate (MFR) and Volume Flow Rate (MVR) |
| Melt Density Calculation | Enabled |
| Calibration Support | Built-in temperature calibration function |
| Data Handling | Local storage, USB export, thermal printer support |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-10 |
| Price | Upon Request |
| Load Capacity | 10 t |
| Measurement Range | ±10 m/km |
| Indication Error | ≤ ±0.2 m/km |
| Zero Offset Error | ±0.2 m/km |
| Sliding Plate Dimensions (L×W) | 500 × 700 mm |
| Overall Bench Dimensions (L×W×H) | 800 × 900 × 100 mm |
| Approach Ramp Dimensions | 800 × 500 mm |
| Compliance Standard | JT/T 507–2004 “Automotive Side-Slip Testing Benches” |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM5 |
| Price Range | USD 9,800 – 16,800 |
| Operating Pressure Range | 0–0.8 MPa (adjustable) |
| Test Temperature | Ambient (optional low-/high-temperature chamber available) |
| Air Hose Internal Diameter | 20 mm / 15 mm |
| Air Reservoir Volume | 136 L |
| Nozzle Tube Internal Diameter | 30 mm / 53 mm |
| Specimen Orientation | 45°, 54°, or 90° for flat samples |
| Sound Pressure Level | ≤120 dB(A) (hearing protection required) |
| Duty Cycle | Continuous operation capable |
| Impact Media | Gravel, crushed stone, calibrated abrasive particles |
| Feed Rate Control | Electromagnetic vibratory feeder |
| Airflow Pressure Regulation | Manual needle valve |
| Required External Compressor | ≥2 m³/min at 0–0.8 MPa |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-2300 |
| Pricing | Upon Request |
| Power Consumption | <5 W (Standby: 1 W) |
| Internal Power Supply | DC 9.6 V / 1200 mAh Ni-MH Battery |
| External Power Input | DC 12 V |
| Communication Interface | Standard 9-pin RS232 (TXD on Pin 3, RXD on Pin 2, GND on Pin 5) |
| Baud Rate | 9600, 8 Data Bits, 1 Stop Bit, No Parity |
| Dimensions | 205 × 145 × 55 mm |
| Weight | 1.0 kg (including battery) |
| Operating Temperature | −15 °C to +45 °C |
| Relative Humidity | 30–80 % RH |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM5 |
| Price Range | USD 7,000 – 14,000 |
| Pressure Range | 0–0.8 MPa (adjustable) |
| Test Temperature | Ambient (optional low-/high-temperature chamber available) |
| Air Hose Internal Diameter | 15 mm / 20 mm |
| Air Reservoir Volume | 136 L |
| Nozzle Tube Internal Diameter | 30 mm / 53 mm |
| Sample Mounting Angles | 45°, 54°, 90° (flat specimens) |
| Sound Pressure Level | ≤120 dB(A) |
| Operation Mode | Continuous-duty cycle |
| Impact Media | Calibrated gravel or crushed stone (ASTM D3292-compliant grading) |
| Feed Rate Control | Electromagnetic vibratory feeder |
| Airflow Pressure Control | Manual needle valve |
| Required Compressed Air Supply | User-provided |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-282 |
| Temperature Control Range | Ambient to 300 °C |
| Temperature Accuracy | ±0.1 °C |
| Heating Rate Options | 5 ±0.5 °C/6 min (ISO 75–1 Method A) or 12 ±1 °C/6 min (ISO 75–1 Method B) |
| Vicat Load | 10 N ±0.2 N (Method A) or 50 N ±1 N (Method B) |
| Deflection Measurement Range | 0–1 mm |
| Deflection Resolution | ±0.001 mm |
| Standard Span Lengths | 64 mm and 100 mm |
| Heating Power | ≤3800 W |
| Compliant with GB/T 1633–2000, GB/T 1643–1979, ISO 75–1 | 2013, ISO 306:2020 |
| Key | Brand: JB Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-10 |
| Price | Upon Request |
| Rated Axle Load Capacity | 3 t / 10 t / 13 t (selectable configuration) |
| Measurement Range | ±10 m/km |
| Indication Error | ≤ ±0.2 m/km |
| Zero Offset Error | ±0.2 m/km |
| Sliding Plate Dimensions (L×W) | 500 mm × 700 mm |
| Bench External Dimensions (L×W×H) | 800 mm × 900 mm × 100 mm |
| Approach Ramp Dimensions | 800 mm × 500 mm |
| Compliance Standard | JT/T 507–2004 “Automotive Side-Slip Test Benches” |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-2300 |
| Pricing | Available Upon Request |
| Power Consumption | <10 W (Static: 5 W) |
| Internal Power Supply | DC 9.6 V (8 × 1.2 V / 700 mAh Ni-Cd batteries) |
| External Power Input | DC 12 V |
| Communication Interface | Standard 9-pin RS232 (TXD on Pin 3, RXD on Pin 2, GND on Pin 5) |
| Serial Configuration | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Dimensions | 205 × 145 × 55 mm |
| Weight | 1.0 kg (including battery) |
| Operating Temperature | −15 °C to +45 °C |
| Relative Humidity | 30%–80% RH |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-236 |
| Temperature Control Range | 100–200 °C |
| Heating Time | <10 min |
| Oscillation Frequency | 1.7 ± 0.1 Hz (100 rpm) |
| Oscillation Angle | 0.5° or 1° |
| Rotor Diameter (with rotor) | 35.55 ± 0.07 mm |
| Torque Range | 0–30 N·m |
| Torque Resolution | 0.01 N·m |
| Power Supply | 220 V AC |
| Pneumatic Pressure Requirement | 0.5 MPa |
| Output | Date, Time, Temperature, Manufacturer ID, Vulcanization Curve, Temperature Profile, ML, MH, t90, and Related Curing Parameters |
| Brand | JB-Brookfield |
|---|---|
| Model | JB-321A |
| Origin | Shanghai, China |
| Compliance | GB/T 8625–2005 |
| Temperature Sensor Range | 0–250 °C, Accuracy ±0.5% FS |
| Fuel Gas Flowmeter | 0–50 L/min |
| Air Flowmeter | 0–50 L/min |
| Timer Range | 0–99 min (Standard Flame Application Duration: 10 min) |
| Burner Dimensions | 200 mm × 200 mm × 3.5 mm (Orifice Thickness) |
| Overall Dimensions (W×D×H) | 1020 mm × 1020 mm × 3930 mm |
| Warranty | 12-month parts & labor coverage |
| Service | On-site installation, commissioning, and operator training included |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JB-221 |
| Pricing | Upon Request |
| Power Supply | 8.4 V Ni-MH Battery Pack |
| Measurement Range | ≤100 kN (sensor-dependent, scalable) |
| Resolution | 10 N |
| Accuracy | ±5% |
| Communication Interface | Standard 9-pin RS232 (TXD on Pin 3, RXD on Pin 2, GND on Pin 5) |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-3000 |
| Pricing | Available Upon Request |
| Key | Brand: Jiubin Instruments |
|---|---|
| Model | JB-600 |
| Origin | Shanghai, China |
| Processor | STMicroelectronics STM32 (ARM Cortex-M3 core) |
| Input Channels | 1 vehicle speed + 4 wheel speed + 1 external control |
| Output Interfaces | USB 2.0, RS-232, SD card slot, external display port |
| Power Supply | 12 V DC (vehicle battery powered) |
| Dimensions | 370 × 260 × 90 mm |
| Weight | 2.0 kg |
| Vehicle Speed Sensing | GPS or non-contact photoelectric sensor |
| Wheel Speed Sensing | High-precision optical pulse encoder (200 pulses/rev), mountable on 4-/5-/6-bolt wheel hubs |
| Compliance | GB/T 13594–2003, UNECE Regulation No. 13 Annex 13 |
| Key | Brand: Jiubin Instruments |
|---|---|
| Model | JB-280B |
| Origin | Shanghai, China |
| Temperature Range | 50–400 °C |
| Temperature Accuracy | ±0.2 °C |
| Display Resolution | 0.1 °C |
| Die Diameter | 2.095 ±0.005 mm |
| Barrel ID | 9.550 ±0.025 mm |
| Piston Head OD | 9.475 ±0.01 mm |
| Piston Length | 6.35 ±0.1 mm |
| Stroke Detection Range | 30 mm |
| Displacement Accuracy | ±0.1 mm |
| Standard Load Levels | 3.185 N, 11.76 N, 21.168 N, 37.24 N, 49 N |
| Max Power Consumption | ≤500 W |
| Temperature Recovery Time | 4 min |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB |
| Quotation | Upon Request |
| Torque Range | 0–20 N·m |
| Actuation | Pneumatic Linear Cylinder (Adjustable Speed) |
| Test Duration Setting | 1–9999 s/min/h |
| Cycle Life Capability | ≥500,000 Cycles |
| Compliance Standards | TPV 8221-75m300, GMW15448 (Apr 2010, Appendix C), IP-0118 V4, EP 87 500.25 |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-10 |
| Type | Single-Plate Automotive Slip Tester |
| Rated Axle Load | 3 t / 10 t / 13 t |
| Measurement Range | ±10 m/km |
| Indication Error | ≤ ±0.2 m/km |
| Zero Offset Error | ±0.2 m/km |
| Slip Plate Dimensions (L×W) | 500 × 700 mm |
| Overall Frame Dimensions (L×W×H) | 800 × 900 × 100 mm |
| Approach Ramp Dimensions | 800 × 500 mm |
| Compliance Standard | JT/T 507–2004 “Automotive Slip Testers” |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-850 |
| Origin | Shanghai, China |
| Power Supply | DC 9.6 V (internal Ni-MH battery) / DC 12 V (external) |
| Dimensions | 330 × 220 × 75 mm |
| Weight | 1.2 kg (incl. battery) |
| Operating Temperature | −20 °C to +45 °C |
| Humidity Range | 30–80 % RH |
| Speed Range | 0–500.0 km/h (resolution: 0.01 km/h, accuracy: ±0.5 %) |
| Distance Range | 0–999999.999 m (resolution: 1 mm, accuracy: ±0.2 %) |
| Time Range | 0–99999.999 s (resolution: 1 ms, accuracy: ±0.1 %) |
| Deceleration Range | 0–14.9 m/s² (resolution: 0.01 m/s², accuracy: ±1 %) |
| MFDD Range | 0–9.999 m/s² (resolution: 0.001 m/s², accuracy: ±1 %) |
| Pedal Force Range | 0–999 N (resolution: 1 N, accuracy: ±1 %) |
| Fuel Consumption Range | 0–999.999 L/100 km (resolution: 0.001 L/100 km, accuracy: ±2 %) |
| Voltage Input | 0–300 V (resolution: 0.1 V, accuracy: ±0.5 %) |
| Current Input | 0–500 A (resolution: 0.1 A, accuracy: ±0.5 %) |
| Display | 240 × 128 dot-matrix LCD with Chinese UI |
| Data Storage | SD card (file-based, unlimited capacity) and USB export |
| Interfaces | Dual RS232, USB, SD slot, built-in thermal printer |
| Real-time OS | µC/OS-II |
| CPU Core | ARM Cortex-based 32-bit microcontroller |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-D |
| Pressure Range | 0–1000 Pa |
| Differential Pressure Limit | ≤42 Pa |
| Flow Measurement Range | 10–800 L/h (selectable units: L/h or kg/h) |
| Minimum Detectable Leak Rate | 0.08 L/min |
| Resolution | 0.001 L/min |
| Test Duration Programmable | 1 s to 9999 h/min/s |
| Sample Capacity | 1 vent per cycle |
| Compliance | TPV 8221-75m300, GMW15448 (Apr 2010), IP-0118 V4 |
Show next